Am I doing this wrong? Pixs

Hello to the mac family,
I'm back with another question. I bought my wife an I-pod Nano along with my
new I-mac. I am not sure what generation it is but is about 3 weeks old.
I am very new to X (9,2 user) so please be kind. I put some sings in I-tunes
and can get them onto her I-pod. Now I wanted to put a few pictures on her
Nano so she can view a few friends pictures. I have the pictures as jpegs, tiff files
and pict files.
I place the pictures in I-Photo and they are there. I hook in her I-pod and don't
seem to see it. Am I correct in thinking her Nano can display pictures? These are just stills
of people etc.
Why can't I seem to get them onto her Nano.
At times I think that technology is just going to fast for this old printer to keep up with.
Please help because these are pictures of her recently deceased family members and
I want her to be able "Visit" them on her I-pod when she feels blue.
Thanks as always........mGb..........Jim

Hello Ian,
Thanks so much for the help. As you suggested it worked great. I am still having a bit
of trouble naming folders, events albums etc. But the main thing is I got several pictures
onto my wife's Nano. She has had several deaths (3) in her family this past year. I wanted her
to be able to see her family if she felt the need.
I know for you it may have been just a simple help but it meant a real lot to us. Thanks for that.
Please remember that there are relics like myself who are just starting to make the change to
X. We need lots of simple help. For example I was not certain which way to face the CD when placing
in slot. I was nervous but I guessed right.
You have done a great thing and I will always be grateful......mGb......Jim

Similar Messages

Am I doing this wrong, E4200 and WAP610n

HI all
I have a E4200 router that is located in my office on the second floor which is a bedroom. Due to the construction of my house here in FL, The signal is greatly diminished by the time it reached the first floor. I would like to remedy this but not sure of the best way.
I have a 50 foot run of cat6 from the E4200 that I was able to snake down into my main living area downstairs.
So, what is going to be a solution to get a strong/full wireless signal downstairs?
is that the WAP610N?
If so how do I set it up.
I have a WET610 but that does not seem to want to work (unless I have it configured wrong)
A rep on chat suggested the RE1000 but I tried that once before it while it improved range a litle it slowed down the WHOLE network big time.
Really appreciate your help in getting this licked. I am not above getting a second E4200 as I am running tomato fw on the one upstairs
thanks

Hi,
Here's what you could do.
All 3 devices should have the same wireless settings. Like the ssid and the type of wireless security. Wireless channel may vary from all 3 devices.
E4200 ---- WAP610N ---- WET610N
Follow these steps for the configuration:
Manually configuring a Linksys Wireless-N Bridge to work with an access point (WET610N)
http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=7a41823e18f54c4cb22a97ec238e82eb_Manually_configur...
Setting up the WAP610N
http://www6.nohold.net/Cisco2/ukp.aspx?pid=80&vw=1&articleid=22519
In this set up, the WAP610N is now gonna be on the 1st floor wirelessly extending the csignal downstairs from the router then WET610N will act as a wireless adapter where you could hardwired it to a non-wireless capable pc (an option for you).
BTW, assigned or change the ip address of the WAP610N in line with the router. For example, the router has 192.168.1.1, on the WAP610N you can assign 192.168.1.6 perhaps. Follow this link;http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=830d397381d541878ee23f43679c1834_20525.xml&pid=80&...
Hope this helps.

Am I doing this wrong? Bindable

[Bindable]
public var apples:Array =["red"];
and then down bellow:
            </fx:DesignLayer>
             <s:DropDownList x="124" y="100" id="myApples" dataProvider="{apples}"/>
         </fx:DesignLayer>
This causes my app when run to be a white screen and no errors are thrown that i can see.
While erasing the dataprovider line makes the app work again.
What am I doing wrong?

Hey Adrien,
The dataProvider property is typed to IList (ArrayList, ArrayCollection, etc...) and not Array. If you use ArrayList, instead of Array, it should work. Try this:
import mx.collections.ArrayList;
[Bindable]
public var apples:ArrayList = new ArrayList(["red"]);
Cheers,
Ryan

I'm new to the whole thing of forums, so I apologize if I'm doing this wrong . . . I need help on with an old version of Adobe Photo Deluxe 2

I have the disc for Adobe Photo Deluxe 2 --- I know it is a very old program, but it does what I need to do in a very easy way. I have tried downloading PhotoShop Album starter edition and Adobe Photoshop Elments version 7 - and they just don't do what I need as easily - or I can't figure it out. Anyhow, I'm using vista on a new machine and cannot run Adobe Photo Deluxe 2 - any help to get this program running would be greatly appreciated. I'm mainly using it to fix and edit clip art for a church newsletter. So I really don't have a lot of money (like none) to spend on buying a new program that still won't do what I need it to do. Thanks for any and all help on this issue.

First use JPanel not Panel.
Panel panels[]=new Panel[4];becomes
JPanel panels[]=new JPanel[4];Then refactor your code so that you use arrays correctly:
panels=new Panel();
panels.setLayout(new FlowLayout(FlowLayout.LEFT));becomes
panels=new JPanel();
panels[i].setLayout(new FlowLayout(FlowLayout.LEFT));
I did the above changes to your code and it worked fine.
Dave

I think I'm doing this wrong

What is the proper way to handle session management from page to page in a JSF application? Specifically, I want to check if the user is logged in before I allow a page to load. I've seen various jsp scriptlet solutions and the use of SendRedirect() to handle the task, but I'm wondering if the JSF framework provides a better mechanism for this as part of the page life-cycle.
Thanks

I'd suggest using a servlet filter instead of including code on each page explicitly. Check the session in the filter and forward to a login page if not logged in.
You'll have to figure out how to send the unauthenticated user to you login page as it'll go through the same filter. For example, if all of your pages use the jsf extension, you could just filter those and have a regular jsp as the login page.
However, I generally use the container managed security, so I haven't had much experience with this method.

Elements vs. symbols - am I doing this wrong?

Hi,
My stage has a good handful of elements, plays fine in the beginning, then slows down as time passes.
My stage only has the main timeline. It contains 23 groups, each with two images inside. All of these (groups and images) are elements, not symbols.
My problem is that, when playing this on my iPhone5, the animations are fluent in the beginning, but towards the end (at 24 sec.) the playback becomes slow and rather choppy...
At any given time, no more than 6 elements are visible (the images simply slide into view and out again).
When I debug the edge javascript code, it seems that all tweens from start to current position are updated each frame - this indicates that playback will in fact become slower, the further it plays... this can't be right, can it?
Am I missing something here?
How do I optimize my animation?

Ok, so I'll answer this myself.
Digging into the code seems to reveal what I suspected: When a tween's time-window comes into scope, the tween is updated every update - this continues even when the tween goes out of scope, causing the animation to run slower because of updates to an increasing number of tweens...
What I still haven't figured out, is why Edge Animate inserts a host of 'injected' tweens when it rebuilds the timeline... I bet it would make sense if I understood the complete structure, but this stunt triples my tween count which is devastating to my animation.

Using Pages for e-books - am I doing something wrong here?

Hi!
I wrote 5 e-books with a total of around 1.500 pages in Pages. Great program
Now I wanted to apply a template but in a mix og horror and frustration, I'm not sure if I got all this wrong.
Can't I apply a template on a document already written? I bought a template with 10-12 different page setups, looking really nice.
It's like I can only add new pages and move my text to them, page by page and I'm NOT going to do that with 1.500+ pages :s
Am I doing this wrong? Is Pages the wrong choise for this?
If not, what program would be the one to use for setting up my books?
Thanks in advance for any feedback

Pages templates do not work in this way, they have fairly poor templating and styling methods.
If it is simply a matter of styling a lot of word processing you could open the previous work in Pages *Word Processing mode* and replace each style with an edited version of itself. Replacing colors is not so easy and layout extremely difficult.
Pages does not have the efficient keyboard methods of applying styles, that more capable DTP packages have. So applying the styles is tedious.
Even with styling unless you had been extremely careful dividing your paragraph, character and list styles you will likely have a lot of manual work to do. Pages does not have a method that I know of to show unstyled text that would drop through the cracks of any changes.
If you did the previous work in *Layout mode*, you may as well start from scratch, there would be too much manual adjustments etc to make it worthwhile.
To get the sophisticated updating of firstly styled text, you would need a DTP program that allows direct exchange of styles. To have the ability to change layout you really would need Adobe InDesign.
Peter

Am I doing it wrong?

I'm trying to animate one of those cool looking circular
symbols (Think transmutation circles from Fullmetal Alchemist or
pentacles and such) and I'm trying to animate it so that the lines
draw themselves as an animation.
Should be too hard, right? So I set to tweening the mask
layer when I note something: I can't tween growth along a path, or
at least I don't know how to. I can only tween movement in a
straight direction and maintain a simple shape - no curves and
such. I'm halfway through doing a key-frame by key-frame mask
'animation' when I stop and think to myself "...No. I'm doing this
wrong."

http://www.keyframer.com/index.php/2006/10/the-write-stuff/
~~~~~~~~~~~~~~~~
--> Adobe Certified Expert
--> www.mudbubble.com
--> www.keyframer.com
~~~~~~~~~~~~~~~~
V^Infinity wrote:
> I'm trying to animate one of those cool looking circular
symbols (Think
> transmutation circles from Fullmetal Alchemist or
pentacles and such) and I'm
> trying to animate it so that the lines draw themselves
as an animation.
>
> Should be too hard, right? So I set to tweening the mask
layer when I note
> something: I can't tween growth along a path, or at
least I don't know how to.
> I can only tween movement in a straight direction and
maintain a simple shape
> - no curves and such. I'm halfway through doing a
key-frame by key-frame mask
> 'animation' when I stop and think to myself "...No. I'm
doing this wrong."
>

Outlook, IMAP and ... am I doing this right?

Hi, just joined this forum as I found some useful info here after searching google for info.
From what I've found out and what I've achieved, I may be doing this wrong, or not able to achieve what I want to achieve.
I access my email, via various email addresses (BTInternet, Yahoo, my own domain, gmail etc) from Outlook at home (which stores everything permanently), Webmail, and mobile phone.
I used to have outlook set up, everything via POP, to nab everything off the server as soon as I send/receive so that it isn't there any more. I've changed this now so it leaves the last 14 days of emails on the server so I can still access them from my phone and webmail after I've 'downloaded' them to outlook. So far so good.
However I have a problem with 'sent' mail. Any email I send stays in the 'sent' box of whatever I sent it from, so I have some Sent mail sat in my Outlook sent folder, some in my webmail sent folder and some in my phone sent folder.
I'd like to keep these all together.
Now my limited understanding of such matters lead me to believe that IMAP mail would be a solution, however having fiddled with it a while I'm not so sure it is.
After searching around I found the instructions on how to do so here: http://community.bt.com/t5/BB-Out-About/Re-IMAP-servers-on-BTInternet-email/td-p/3045/page/3 which refers to setting up IMAP on a mobile device. However setting it up the same way in Outlook gives me a whole new Personal Folder, and only shows me what's on the server (it doesn't 'sync' in the way POP does, I THINK...) and I am unable to successfully send anything - any email I write through that account sits in my my main 'Outlook' Personal folders Outbox, and goes nowhere.
What I want is something that works transparently like POP access did - all my emails from various services coming down into my one inbox, then shuffled about to various folders depending on various Outlook rules, and being stored permanently on my machine, but now I ALSO want the ability to have a centralised 'Sent' folder accessible from anywhere.
Is what I want achievable? And if so, how do I do it?
Thanks!

Have a look at this discussion...
http://discussions.apple.com/thread.jspa?threadID=1150785&tstart=0

I have a Windows 8.1 and it's even running slow. I'm a complete novice with computers (I've only had this one for 3 weeks) and I'm probably doing something wrong, but I haven't a clue what....

I have a Windows 8.1 and it's even running slow. I'm a complete novice with computers (I've only had this one for 3 weeks) and I'm probably doing something wrong, but I haven't a clue what.
The tools are not responding when I try to use them. Some of them work sometimes, but not others and some don't work at all. I'm in a design class online and I need these tools desperately. I have an assignment due Monday and I'm losing the whole weekend because Tech Support is only open M-F!
Any help anyone can give me will be appreciated.
Thanks,
Rose Ireland

Maybe these links provide some pertinent information.
Optimize performance | Photoshop CS4, CS5, CS6, CC
Photoshop: Basic Troubleshooting steps to fix most issues

Is this a bug in ipod software or am i doing something wrong?

I got my ipod video a few weeks ago and was excited to be able to carry all 7000+ songs around in one place.. but then i ran into this problem and i'm not sure if it's a bug or if i'm doing something wrong.
let's say i have exactly one album by an artist.. and i also happen to have some singles from the artist, with no album set... (i prefer not to have albums set for songs i don't have the entire album for, to keep from having to sort through a truckload of albums i don't completely have).
when i browse by artist, and i select the artist, only the songs in the album shows up, all the non-album labeled songs are not visible! the same thing happens when i choose by genre..
in fact the only way to find those songs not bound to an album is to select them from the song list.. and having to scroll through 7000+ songs to find one really bites..
curiously enough, if there is two or more albums, then i can find the songs without albums.. definately sounds like a bug to me.. the software for the ipod video is only at v1.0, maybe they'll fix this (hopefully other ipods don't have this problem, i have no way of knowing though).
one work around i have tried is to set an empty album for the artist's song that has none, but i mean i don't want to do that for all my non-albumed songs because i'm interested in preserving the timestamp of songs (to know when i got them) and i can't reasonably search for songs that have exactly one album to just set those..

when i go to Music > Artist > All, as you suggested, i see all the albums i have listed. doesn't really relate to my problem with artists with songs in one album, as well as song w/o album set, and the latter not showing up.
but that reminds me, why is it when i go to the All section from a particular artist and they do have more than one album (or even no albums), the order of the songs is in the order they are in the albums.. if i wanted the order it is on albums, i would have selected that album for example.. it would be nice if the songs were in alphabetical order when you're NOT browsing by album, making a particular song easier to find (what if you have thirteen albums for example and u aren't sure which album a song is on, now you have to scroll through a seemingly random ordered list to find one song, alphabetical would be SOOOO helpful!)

I am trying to activate new itunes card. I am getting error message: The code you have entered has not been properly activated. Does this mean the store did something wrong or me?

I am trying to activate new itunes card. I am getting error message: The code you have entered has not been properly activated. Does this mean the store did something wrong or me?

Yes, the store didn't properly activate the card. If the store is nearly then you could try going back and asking them to do so, if it isn't (or if they can't/won't help) then try contacting iTunes Support (you will probably need to give them images of the front and back of the card, and possibly its receipt) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then iTunes Cards And Codes

Rented a movie and it take 60 minutes to download, will this ever be fix or am I doing something wrong?

Every time I rent a movie on my new apple tv it always take 1 hour to down load, am I doing something wrong? can this issue be fixed?

You need a faster internet connection. After I upgraded to a 6 meg connection that probelm went away.
How fast is your internet connection?

HT1766 My iCloud back up estimates a waiting time of 21 hours, is this accurate or am I doing something wrong?

I wonder if im doing something wrong. The phone is plugged into the power outlet and occasionally I check to see if it progresses. I am doing it manually thru the icloud section.

>When you use the includeIn command, by default the object will only be created when it is needed. Hence, you will execute a creationComplete
>event, and therefore atleast 100 million (sometimes 400 million) loops, when each required Button state is needed. Obviously, once each button
>state has been created the creationComplete handler (invalidateDisplayList) will not usually be called again.
So are you saying there is a better way or another way to do that? Or are you just telling me that's how it works? Because I know that the includeIn isn't creating the other buttons untill they are needed. I need them created when the button is created. That is my question, how do I get the other states to be created when the button is created so that I don't see the button flash black?
>As written, bioStyleChanged will always remain true
>if(!bioStyleChanged) {
> bioStyleChanged = false;
>}
>this code does nothing for you.
Sorry, I missed that when cleaning up the code to ask for help.
Thanks,
cdman52

[Blog] If you are not scaling Oracle WebLogic like this, then you're doing it wrong

If you are not scaling Oracle Middleware like this, then you’re doing it wrong
We have all built an Oracle Middleware box from scratch once. But, if you ever build an Oracle Middleware box from scratch twice, you’re doing it wrong! (click to tweet). Okay, maybe that is a little extreme. Surely there are some business requirements that justify building multiple Middleware deployments from scratch, but you should certainly do everything in your power to avoid it. Here’s how you should be implementing Oracle Middleware with today’s tools. (If you don’t feel like reading, jump to the end to see how Blue Medora makes your life a whole lot easier).
Oracle Middleware is designed from the ground up to be both vertically and horizontally scalable. Unfortunately, most implementations of Oracle Middleware do not effectively leverage these capabilities and many admins focus only on scaling vertically. To maximize your Oracle Middleware investment, you must have an appropriate strategy to horizontally scale within your private/public crowd.
Continued: If you are not scaling Oracle Middleware like this, then you’re doing it wrong | Blue Medora

I'm not entirely sure that you are right or wrong on the phone recording issue. As soon as I hear the Verizon message state that "This call may be monitored or recorded for quality and training purposes" I flip my recorder on. I always tell Verizon that our call is either being recorded likewise or that it might be monitored by other ears. I do this at the get go so that names are recorded and I hear their response. A lot of the times the reps, some who work in a call center and some who work from home, some surrounded by screamin younguns and barking dogs and cats fighting....they will flat out refuse and say that THEY don't record the calls, that someone at Verizon does, and if you want to get a copy of the recording that there is a number to call, "I'll get that number for you, one moment........::click.::" Some say, "Don't tell em you're recording since they told you the call is already." The recordings says "MAY" which isn't a guarantee that it is. Best to be upfront since, if the rep[ knows their stuff, they might not mind as much and there's nothing like trying to use in-admissible evidence.

Am I doing this wrong? Pixs

Similar Messages

Maybe you are looking for