Am not able to open photoshop now, please check the screen shot. It showing "up to date" ??

Hi I unistalled my creative cloud and installed adobe cs5 tools (including photoshop and all) then i uninstalled that and again installed "creative cloud" but from that moment i am getting this message above photoshop app "up to date" .Please check the attached image. Previously am able to click and open photoshop app but now am not able to click there.

Is Ps present in /Applications or not?
If not then please Run the Cleaner tool to remove Ps CC :http://www.adobe.com/support/contact/cscleanertool.html .
Restart your system and then try installing Ps again.
Regards,
Ashutosh

Similar Messages

Not able to open MS Excel attachment in the email Using SO_NEW_DOCUMENT_ATT

Hi, I am not able to open the attached MS excel in the mail its giving error as "Problems came up in the following areas during load Table". My requirement is to send a colored excel as attachment through mail when the program is executed in background. For this i have reffered the following link " http://wiki.sdn.sap.com/wiki/display/Snippets/FormattedExcelasEmailAttachment". That is i have used the XML method for this . I would be thankful if you can let me know where i am doing the mistake For refference i am pasting my code: * Send mail when executed in background mode IF sy-batch eq 'X'. PERFORM send_mail_bkgrnd. ELSE. " Foreground mode PERFORM build_layout. PERFORM build_field_cat. PERFORM display. ENDIF. FORM SEND_MAIL_BKGRND . PERFORM process_xml_data. PERFORM disatch_mail. ENDFORM. " SEND_MAIL_BKGRND &---- *& Form PROCESS_XML_DATA &---- FORM PROCESS_XML_DATA . DATA lv_xlwidth TYPE i. * Creating a ixml Factory l_ixml = cl_ixml=>create( ). * Creating the DOM Object Model l_document = l_ixml->create_document( ). * Create Root Node 'Workbook' l_element_root = l_document->create_simple_element( name = 'Workbook' parent = l_document ). l_element_root->set_attribute( name = 'xmlns' value = 'urn:schemas-microsoft-com:office:spreadsheet' ). ns_attribute = l_document->create_namespace_decl( name = 'ss' prefix = 'xmlns' uri = 'urn:schemas-microsoft-com:office:spreadsheet' ). l_element_root->set_attribute_node( ns_attribute ). ns_attribute = l_document->create_namespace_decl( name = 'x' prefix = 'xmlns' uri = 'urn:schemas-microsoft-com:office:excel' ). l_element_root->set_attribute_node( ns_attribute ). * Create node for document properties. r_element_properties = l_document->create_simple_element( name = 'TEST_REPORT' parent = l_element_root ). l_value = sy-uname. l_document->create_simple_element( name = 'Author' value = l_value parent = r_element_properties ). * Styles r_styles = l_document->create_simple_element( name = 'Styles' parent = l_element_root ). * Style for Header r_style = l_document->create_simple_element( name = 'Style' parent = r_styles ). r_style->set_attribute_ns( name = 'ID' prefix = 'ss' value = 'Header' ). r_format = l_document->create_simple_element( name = 'Font' parent = r_style ). r_format->set_attribute_ns( name = 'Bold' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Interior' parent = r_style ). r_format->set_attribute_ns( name = 'Color' prefix = 'ss' value = '#92D050' ). r_format->set_attribute_ns( name = 'Pattern' prefix = 'ss' value = 'Solid' ). r_format = l_document->create_simple_element( name = 'Alignment' parent = r_style ). r_format->set_attribute_ns( name = 'Vertical' prefix = 'ss' value = 'Center' ). r_format->set_attribute_ns( name = 'WrapText' prefix = 'ss' value = '1' ). r_border = l_document->create_simple_element( name = 'Borders' parent = r_style ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Bottom' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Left' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Top' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Right' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). * Style for Data "Color properties are set over here r_style1 = l_document->create_simple_element( name = 'Style' parent = r_styles ). r_style1->set_attribute_ns( name = 'ID' prefix = 'ss' value = 'Data' ). r_border = l_document->create_simple_element( name = 'Borders' parent = r_style1 ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Bottom' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Left' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Top' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). r_format = l_document->create_simple_element( name = 'Border' parent = r_border ). r_format->set_attribute_ns( name = 'Position' prefix = 'ss' value = 'Right' ). r_format->set_attribute_ns( name = 'LineStyle' prefix = 'ss' value = 'Continuous' ). r_format->set_attribute_ns( name = 'Weight' prefix = 'ss' value = '1' ). * Worksheet r_worksheet = l_document->create_simple_element( name = 'Worksheet' parent = l_element_root ). r_worksheet->set_attribute_ns( name = 'Name' prefix = 'ss' value = 'Sheet1' ). * Table r_table = l_document->create_simple_element( name = 'Table' parent = r_worksheet ). r_table->set_attribute_ns( name = 'FullColumns' prefix = 'x' value = '1' ). r_table->set_attribute_ns( name = 'FullRows' prefix = 'x' value = '1' ). * Column Formatting DO 32 TIMES. CASE sy-index. WHEN 1. lv_xlwidth = '300'. WHEN 2. lv_xlwidth = '300'. WHEN OTHERS. lv_xlwidth = '300'. ENDCASE. PERFORM clmn_formatting USING lv_xlwidth. ENDDO. * Blank Row r_row = l_document->create_simple_element( name = 'Row' parent = r_table ). * Column Headers Row r_row = l_document->create_simple_element( name = 'Row' parent = r_table ). r_row->set_attribute_ns( name = 'AutoFitHeight' prefix = 'ss' value = '1' ). * VC. No. r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ). r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ). r_data = l_document->create_simple_element( name = 'Data' value = 'VC No.' parent = r_cell ). r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ). * Source r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ). r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ). r_data = l_document->create_simple_element( name = 'Data' value = 'Source' parent = r_cell ). r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ). DO 30 TIMES. * * TPLGRP r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ). r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Header' ). r_data = l_document->create_simple_element( name = 'Data' value = '' parent = r_cell ). r_data->set_attribute_ns( name = 'Type' prefix = 'ss' value = 'String' ). ENDDO. * Blank Row after Column Headers r_row = l_document->create_simple_element( name = 'Row' parent = r_table ). DO 32 TIMES. r_cell = l_document->create_simple_element( name = 'Cell' parent = r_row ). r_cell->set_attribute_ns( name = 'StyleID' prefix = 'ss' value = 'Data' ). ENDDO. * Data Table CLEAR gs_output. LOOP AT gt_output INTO gs_output. r_row = l_document->create_simple_element( name = 'Row' parent = r_table ). DO 32 TIMES. CASE sy-index. WHEN 1. a_dvalue = gs_output-vc_number. WHEN 2. a_dvalue = gs_output-source. WHEN 3. a_dvalue = gs_output-tplgrp_01. WHEN 4. a_dvalue = gs_output-tplgrp_02. WHEN 5. a_dvalue = gs_output-tplgrp_03. WHEN 6. a_dvalue = gs_output-tplgrp_04. WHEN 7. a_dvalue = gs_output-tplgrp_05. WHEN 8. a_dvalue = gs_output-tplgrp_06. WHEN 9. a_dvalue = gs_output-tplgrp_07. WHEN 10. a_dvalue = gs_output-tplgrp_08. WHEN 11. a_dvalue = gs_output-tplgrp_09. WHEN 12. a_dvalue = gs_output-tplgrp_10. WHEN 13. a_dvalue = gs_output-tplgrp_11. WHEN 14. a_dvalue = gs_output-tplgrp_12. WHEN 15. a_dvalue = gs_output-tplgrp_13. WHEN 16. a_dvalue = gs_output-tplgrp_14. WHEN 17. a_dvalue = gs_output-tplgrp_15. WHEN 18. a_dvalue = gs_output-tplgrp_16. WHEN 19. a_dvalue = gs_output-tplgrp_17. WHEN 20. a_dvalue = gs_output-tplgrp_18. WHEN 21. a_dvalue = gs_output-tplgrp_19. WHEN 22. a_dvalue = gs_output-tplgrp_20. WHEN 23. a_dvalue = gs_output-tplgrp_21. WHEN 24. a_dvalue = gs_output-tplgrp_22. WHEN 25. a_dvalue = gs_output-tplgrp_23. WHEN 26. a_dvalue = gs_output-tplgrp_24. WHEN 27. a_dvalue = gs_output-tplgrp_25. WHEN 28. a_dvalue = gs_output-tplgrp_26. WHEN 29. a_dvalue = gs_output-tplgrp_27. WHEN 30. a_dvalue = gs_output-tplgrp_28. WHEN 31. a_dvalue = gs_output-tplgrp_29. WHEN 32. a_dvalue = gs_output-tplgrp_30. ENDCASE. PERFORM fill_data_val_excel USING a_dvalue. ENDDO. CLEAR gs_output. ENDLOOP. * Creating a Stream Factory l_streamfactory = l_ixml->create_stream_factory( ). * Connect Internal XML Table to Stream Factory l_ostream = l_streamfactory->create_ostream_itable( table = l_xml_table ). * Rendering the Document l_renderer = l_ixml->create_renderer( ostream = l_ostream document = l_document ). l_rc = l_renderer->render( ). * Saving the XML Document l_xml_size = l_ostream->get_num_written_raw( ). ENDFORM. " PROCESS_XML_DATA &---- *& Form DISATCH_MAIL &---- FORM DISATCH_MAIL . DATA: objpack LIKE sopcklsti1 OCCURS 2 WITH HEADER LINE. DATA: objhead LIKE solisti1 OCCURS 1 WITH HEADER LINE. DATA: objbin LIKE solix OCCURS 10 WITH HEADER LINE. DATA: objtxt LIKE solisti1 OCCURS 10 WITH HEADER LINE. DATA: reclist LIKE somlreci1 OCCURS 5 WITH HEADER LINE. DATA: doc_chng LIKE sodocchgi1. DATA: tab_lines LIKE sy-tabix. DATA: l_num(3). DATA: subj_date(10) TYPE c. * Mail Subject data lv_date TYPE d. lv_date = sy-datum. CONCATENATE lv_date6(2) '-' lv_date4(2) '-' lv_date+0(4) INTO subj_date. CONCATENATE 'SAP Application Usage Report ' subj_date INTO doc_chng-obj_descr SEPARATED BY space. * Mail Contents objtxt = 'Dear User,'. APPEND objtxt. CLEAR objtxt. APPEND objtxt. CONCATENATE 'Please find the attached SAP Application Usage Report for ' subj_date INTO objtxt SEPARATED BY space. " Mail Contents APPEND objtxt. CLEAR objtxt. APPEND objtxt. objtxt = 'Thanks & Regards,'. APPEND objtxt. objtxt = 'Himanshu Kanekar'. APPEND objtxt. DESCRIBE TABLE objtxt LINES tab_lines. READ TABLE objtxt INDEX tab_lines. doc_chng-doc_size = ( tab_lines - 1 ) * 255 + STRLEN( objtxt ). * Packing List For the E-mail Body objpack-head_start = 1. objpack-head_num = 0. objpack-body_start = 1. objpack-body_num = tab_lines. objpack-doc_type = 'RAW'. APPEND objpack. * Creation of the Document Attachment LOOP AT l_xml_table INTO wa_xml. CLEAR objbin. objbin-line = wa_xml-data. APPEND objbin. ENDLOOP. DESCRIBE TABLE objbin LINES tab_lines. objhead = 'SAP Login Details'. APPEND objhead. * Packing List For the E-mail Attachment objpack-transf_bin = ''."'X'. objpack-head_start = 1. objpack-head_num = 0. objpack-body_start = 1. objpack-body_num = tab_lines. CONCATENATE 'SAP_Login_Details' subj_date INTO objpack-obj_descr SEPARATED BY space. objpack-doc_type = 'XLS'. objpack-doc_size = tab_lines * 255. APPEND objpack. * Target Recipent CLEAR reclist. reclist-receiver = reclist-rec_type = 'U'. APPEND reclist. * Sending the document CALL FUNCTION 'SO_NEW_DOCUMENT_ATT_SEND_API1' EXPORTING document_data = doc_chng put_in_outbox = 'X' commit_work = 'X' TABLES packing_list = objpack object_header = objhead contents_txt = objtxt contents_hex = objbin receivers = reclist EXCEPTIONS too_many_receivers = 1 document_not_sent = 2 operation_no_authorization = 4 OTHERS = 99. ENDFORM. " DISATCH_MAIL

Refer:
http://www.sap-img.com/abap/sending-mail-with-attachment-report-in-background.htm
http://www.saptechies.com/sending-mail-with-attachment-report-in-background/

HT1918 I have created a free apple Id and I am not able to use it further please do the need full

I have created a free apple Id and now I am not able to use it further

Hello Asokwah,
Sign out from your pple Id on your Device and Go to https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/ and then Sign In with your Apple Id here and Under your Primary Email Address click on Resend Next to Verification Email Sent. Now Go to your Email Account and Verify your Apple Id again by clicking in the Link inside the Mail that you might have received from Apple. Now Sign In on your Device and try to make a Purchase and if it is for the first time then you will be asked to Review your Account and if you have entered your Credit/Debit card in your Account then you will have to just Enter your 3 Digits CVV Number and then click on Done. And then you can try downloading any Application from AppStore or Music from iTunes Store and check if its working.

I am not able to open a new tab in the same window.

I was able to opennew tabs in the same window but now I am unable to do it

hello, can you try to replicate this behaviour when you launch firefox in safe mode once? if not, maybe an addon is interfering here...
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]

Hi iam new to implement custome code in sssrs when iam created connection in ssrs its throwing error please find the screen shot

when iam previwing report this error is occured
System.Data.SqlClient.SqlException: Login failed for user 'FPS\hariprasad.a'.
   at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection)
   at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj)
   at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj)
   at System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK)
   at System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
   at System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
   at System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
   at System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
   at System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
   at System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnec

hi pasted error .iam impleting custom code in ssrs like below
Public Shared Function DeleteData(Byval empno AS Integer) As String
                Dim strResult As String
                Dim conn As New System.Data.SqlClient.SqlConnection
                conn.ConnectionString = "Integrated Security=SSPI;Data Source=172.16.1.111\DATA_SERVICES;Initial Catalog=Recounsiled"
                Dim sql As String
                sql = "sp_empno"
                Dim com As New System.Data.SqlClient.SqlCommand
                com.CommandText = sql
                com.CommandType = System.Data.CommandType.StoredProcedure
                com.Parameters.Add("@empno", System.Data.SqlDbType.Int).Value =empno
                com.Connection = conn
                Try
                                com.Connection.Open()
                                com.ExecuteNonQuery()
       com.Connection.Close()
                                strResult = "Successful"
                Catch ex As Exception
                                com.Connection.Close()
                                strResult = ex.ToString()
                End Try
                return strResult
End Function

Windows 8.1 - Have loaded PSE12 and Organizer works fine - not able to open Editor!

Windows 8.1 - Have loaded PSE12 and Organizer works fine - not able to open Editor! - I get the moving band - but nothing! Any suggestions - it has worked until the computer crashed and I have reloaded it (several times) and yet Editor won't open - how frustrating!.

I think you need to contact Adobe directly using the link below. Use the dropdown menu for boxes (1) & (2) to scroll down the list and choose:
1. Adobe Photoshop Elements
2. Adobe ID, and signing-in
3. Click on the blue button: Still need help? Contact us – then click the area marked chat 24/7, then click “start chat ”
It’s usually possible to start a live chat, if an Adobe agent is free, and often to get the problem fixed right away. Ask to be transferred to technical support. Have your serial number available. The agent can directly troubleshoot your system if you agree to activate the Adobe Connect add-on.
Click here to get help now Contact Customer Care

Not able to open em console!

Hi,
I have created a new domain and started the weblogic server.Its in running mode, but not able to open http://<host>:7001/em
the error is as follows..
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
I have checked in weblogic console. there in the "Deployments" tab , em.ear is in failed state.i tried to update(redeploy) it to adminserver, but im getting the following error....
"weblogic.application.ApplicationLifecycleEvent.getDeploymentOperation()Lweblogic/application/DeploymentOperationType; "
Please provide some inputs.

stopping and starting em application from AdminConsole-> Deployments did the trick.
Thanks,
Bob

Not able to open pdf file ( smart form from webdynpro )

Dear friends,
while trying to download pdf file from webdynpro i am getting the following error ( pls check the screen shot and also my code )
could any one please let me know what's the issue
Thanks
Vijaya
data    v_bin_filesize           TYPE i,
           st_job_output_info       TYPE ssfcrescl,
            bin_pdfx TYPE xstring,
data : it_docs     TYPE STANDARD TABLE OF docs,
          it_lines    TYPE STANDARD TABLE OF tline.
data : lv_file_name type string.
          lv_file_name = 'PDFSMARTFORM.PDF'.
CALL FUNCTION 'CONVERT_OTF_2_PDF'
* EXPORTING
*   USE_OTF_MC_CMD               = 'X'
*   ARCHIVE_INDEX                =
     IMPORTING
       bin_filesize           = v_bin_filesize
     TABLES
       otf                    = st_job_output_info-otfdata
       doctab_archive         = it_docs
       lines                  = it_lines
     EXCEPTIONS
       err_conv_not_possible = 1
       err_otf_mc_noendmarker = 2
       OTHERS                 = 3.
   cl_wd_runtime_services=>attach_file_to_response(
   i_filename = lv_file_name
   i_content = bin_pdfx
   i_mime_type = 'application/pdf'
   i_in_new_window = abap_false
   i_inplace       = abap_false ).

Hi,
I think the binary file conversion was not done properly( you haven't filled bin_pdfx, its the otf_data ). OR, Use CONVERT_OTF FM and pass format as PDF. Check this document for reference: Opening a Smartform in Web Dynpro ABAP
Hope this helps u,
Regards,
Kiran

I have ebook in epub format. I was using it in Windows XP. However, recently I rebooted my system to Windows 7. Now I am not able to open it in Adobe Digital Edition. It gives an error saying "Document is licensed for a different user account". Can please

I have ebook in epub format. I was using it in Windows XP. However, recently I rebooted my system to Windows 7. Now I am not able to open it in Adobe Digital Edition. It gives an error saying "Document is licensed for a different user account". Can please someone give me a solution for this. the book is expensive and i don't want to lose it. Please help.

I have ebook in epub format. I was using it in Windows XP. However, recently I rebooted my system to Windows 7. Now I am not able to open it in Adobe Digital Edition. It gives an error saying "Document is licensed for a different user account". Can please someone give me a solution for this. the book is expensive and i don't want to lose it. Please help.

My photoshop element 10 stop working, I am not able to open ti anymore. ? I posted this question a few days ago and I did not get any anwer yer, please help

My photoshop element 10 stop working, I am not able to open ti anymore. ? I posted this question a few days ago and I did not get any anwer yer, please help

I have photoshop premiere element 10 editor and organizer and I have a Macbook pro 10,9,9
When I try to open a picture with element editor or if I try to open PS editor directly I see this
file:///Users/main/Desktop/Screen%20Shot%202014-11-26%20at%201.17.35%20PM.png
when I click on Modify it doesn't open and I have this window
file:///Users/main/Desktop/Screen%20Shot%202014-11-26%20at%201.21.07%20PM.png
and if I click REOPEN , I still have the same message
Lucie

I am not able to open my Photoshop CS5 files due to the following warning, "Could not complete your

I am not able to open my Photoshop CS5 files due to the following warning, "Could not complete your request because an unexpected end-of-file was encountered". Please help!

That could be caused by truly damaged file/s.
What format?
How did you create or get the file/s?

Not able to open adobe XI Pro after I have filled out a documents and trying saving it. The program stops working & won't open up again. Tried to complete a repair, rebooting nothing works. Help please.

Not able to open adobe XI Pro after I have filled out a documents and trying saving it. The program stops working & won't open up again. Tried to complete a repair, rebooting nothing works. Help please.

Hi,
Can you pls. provide more details of the issue?
OS/Platform
It would be great if you can provide the MSI logs for repair from the %temp% directory.
Thanks,

Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please help

Hi,
Not able to open PDF or do any changes even if the PDF opens. Run Time Error is shown every time when trying to open PDF. Please help

Hi Shilpa ,
Please refer to the following link and see if that helps you out.
https://helpx.adobe.com/acrobat/kb/runtime-error-roaming-profile-workflows.html
Are you trying to access the PDF with Acrobat or Adobe Reader?
Regards
Sukrit Dhingra

I own a Canon 6D and just bought Photoshop CS6 and I am not able to open my raw images into Photoshop CS6. What do I do to fix this?

I own a Canon 6D and just bought Photoshop CS6 and I am not able to open my raw images into Photoshop CS6. I downloaded the camera raw and dng converter for it, but realized in the process that the one I downloaded does not work with my Mac version, 10.9.5.

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Mylenium

NOT ABLE TO OPEN PDF FILE ON IPHONE 4 **PLEASE HELP

Im not able to open a PDF file on my iphone 4 and i already downloaded 2 pdf readers : (adobe reader free and PDF reader ). I want to view a pdf file that i use for work on on a pc comp,it's a file we use to type in info, for real estase appraisal. Is my problem not having full version of adobe like the 10 $ one that can make changes ...I simply dont wanna waste money randomly buying aps?!?!?!?!?!?...Buy the way the files opens perfectly on my macbook pro

Hi there @Delta0 and welcome to the community!
I understand you can scan however, you cannot open up the PDF file afterwards.
Please let me know which operating system you are running and I will certainly look into this issue for you.
Which Windows Operating System am I running?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
In the meantime, try updating Adobe to see if that helps.
Have a great day
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

Am not able to open photoshop now, please check the screen shot. It showing "up to date" ??

Similar Messages

Maybe you are looking for