Am trying to sync my new 3gs to itunes.Says "iphone in recovery mode.Must restore the iphone before it can be used with itunes" Am worried bout doing this as phone came with a note saying " Do NOT restore or update software on itunes when asked otherwise

Am trying to sync my 3gs to itunes,keeps coming up with a notice saying! iphone in recovery mode. Must restore the iphone before it can be used with itunes.
Am really worried about doing this as the phone came with a note enclosed saying "Do NOT restore or update iphone software on itunes when asked to otherwise unlock will be lost"
Is it safe for me to restore or will it block my phone?
Can anybody help me please?

Sounds like you purchased a phone that was hacked to run on a network other than the one it was originally locked to.
Where, exactly did you get this phone?  If it's already in a state where it says it must be restored, you don't have a choice. If the phone was hacked, it will be re-locked to the network it was originally locked to. ONLY the carrier it is locked to can legitimately authorize unlocking the phone.

Similar Messages

  • HT1212 It says could not connect to the ipod because it is locked with a passcode. You must enter our passcode on the ipod before it can be used with Itunes. I forgot the passcode so how can I enter/ restore/reset it?

    It says could not connect to the ipod because it is locked with a passcode. You must enter our passcode on the ipod before it can be used with Itunes. I forgot the passcode so how can I enter/ restore/reset it?

    As the linked articl says, place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                          
    If recovery mode does not work try DFU mode.                         
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings         
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: How to back up      
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store         

  • I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad

    I try to connect to iTunes and it comes up with a box saying "iTunes could not connect to the iPad because it is locked with a passcode. you must enter your code on the iPad before it can be used with iTunes", but i cant enter the code on the iPad because it is saying "connect to iTunes". Can anybody help?? It is on the new iPad.

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • HT1212 itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the scree

    itunes could not be connected to ipad because it is locked with a passcode, i must enter a passcode on the ipad before it can be used with itunes but all i see is "iPad is disabled connect to itunes" I have a passcode but nothing shows on the screen

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    How to Reset a Forgotten Password for an iOS Device
    http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • Itunes could not connect to the ipod becasue it is locked with a passcode. You must enter your passcose on the ipod before it can be used. BUT i cant unlock it and i dont have the original itunes that is was hooked up with before either. HELP!

    "itunes could not connect to the ipod becasue it is locked with a passcode. You must enter your passcose on the ipod before it can be used" BUT i cant unlock it and i dont have the original itunes that is was hooked up with before either. HELP! It wont let me restore because it is locked. I cannot unlock it. I have tried everything online. nothing works.

    Place the iPod in recovery mode and then restore the iPod to factory defaults/new iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • HT1212 IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."

    IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."

    iOS: Device disabled after entering wrong passcode
    http://support.apple.com/kb/ht1212
    How can I unlock my iPad if I forgot the passcode?
    http://tinyurl.com/7ndy8tb
    Using iPhone/iPad Recovery Mode
    http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
    Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
    ~~~~~~~~~~~~~
    ‘iPad is disabled’ fix without resetting using iTunes
    Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
    I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
    Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
    1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
    2. Open iTunes with the iPad disconnected.
    3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
    4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
    5. Click ‘Setup as new iPad’ and then click restore.
    6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
    7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
    8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
    If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
    ~~~~~~~~~~~~~
    Try it and good luck. You have nothing more to lose if it doesn't work for you.
     Cheers, Tom

  • HT1212 I got the message copied below in iTunes but I still need to keep my pics and videos. "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."

    I got the message copied below in iTunes but I still need to keep my pics and videos. Passcode has been wrongly entered 100 times by my little chiled. Is it possible to still keep the data?
    "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."

    PHONE LOCKED
    If your phone is locked because you have incorrectly entered the unlock passcode too many times then follow the steps in this article http://support.apple.com/kb/ht1212

  • Ipad is disabled connect to itunes but i connected it and there was a popup saying itunes cannot connect to ipad because it is locked with a passcode. You mus enter the passcode on the ipad before it can be used with itunes. but i couldnt enter my passwor

    my ipad is disabled and it said ipad is disabled connect to itunes but i connected it and was restoreing it and then there was a popup and it said itunes cannot connect to ipad because it is locked with a passcode. and you must enter the passcode on the ipad before it can be used with itunes. But i couldnt even write the passcode on my ipad cause it was disabled. What should i do now????

    Follow the instructions on this page to reset your iPad : http://support.apple.com/kb/HT1212
    Note: If iTunes asks you to enter the passcode, try another computer that you have synced with. Otherwise, go to "If you have never synced your device with iTunes, or you do not have access to a computer" section below.
    If you have never synced your device with iTunes, or you do not have access to a computer
    If you see one of following alerts, you need to erase the device:
    "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
    "You haven't chosen to have [device] trust this computer"
    If you have Find My iPhone enabled, you can use Remote Wipe to erase the contents of your device. If you have been using iCloud to back up, you may be able to restore the most recent backup to reset the passcode after the device has been erased.
    Alternatively, place the device in recovery mode and restore it to erase the device:
    Disconnect the USB cable from the device, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to shut down.
    While pressing and holding the Home button, reconnect the USB cable to the device. The device should turn on.
    Continue holding the Home button until you see the Connect to iTunes screen.
    iTunes will alert you that it has detected a device in recovery mode. Click OK, and then restore the device.

  • TS3274 Error message on ipad when we tried to download images to computer.  'Itunes has detected an ipad in recovery mode. You must restore your ipad before it can be used with iTunes.

    Error message on ipad when we tried to download images to computer.  'Itunes has detected an ipad in recovery mode. You must restore your ipad before it can be used with iTunes.  It downloaded some images prior to this message and we selected skip any files with errors.
    Ipad now just showing apple image with power cord.  Don't want to click restore and lose all data.

    Once the Device is asking to be Restored with iTunes... it is too late to save anything...
    To minimise loss... Connect to iTunes on the computer you Usually Sync with and Restore from the most recent Backup...
    http://support.apple.com/kb/HT1414
    Restore from Backup
    http://support.apple.com/kb/ht1766

  • ITunes could not connect to the iPad "Bob's iPad" because it is locked with a passcode. You must enter your passcode on the iPad before it can be used with iTunes.

    i cant reset my i pad it wont let me

    FORCE IPAD INTO RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.

  • IPhone in Recovery Mode- Must Restore

    Hey... I am having a lot of trouble. I bought an iPhone off of a friend.
    Here is what is going on.
    I turn on the phone - it says to connect to iTunes. I have done so (and downloaded the newest version of iTunes as well)
    I connect it and it states that my iPhone is in Recovery Mode and that I must restore it before it can be used with iTunes.
    I click restore and it begins the download process of iPhone software update.
    It takes forever to download (I live in a rural area on SLOW DSL) \
    After it downloads (for the 4th time I might add) it begins to inialize and then comes up with an error code stating iTunes could not sync to the iPhone '[iPhone ]'.
    Can someone please help me. Apple is closed due to Thanksgiving holiday and I know nothing about the iPhone.
    Thank you all!

    It should have given you an error code along with the information that it couldn't sync. What was the code?
    See this for a start: http://support.apple.com/kb/TS1275?viewlocale=en_US

  • HT1414 Ok so my ipod is disabled for 21,456,066 minutes and i tried to go on itunes to umlick it but it said "Itunes could not connect to the ipod because it is locked with a passcode. You must enter your passcode on the ipod before it can be used with it

    Please help!

    Either wait until Wednesday, February 12, 2053, or restore the iPod:
    Disconnect the USB cable from the iPod touch, but leave the other end of the cable connected to your computer's USB port.
    Turn off the device: Press and hold the Sleep/Wake button for a few seconds until the red slider appears, then slide the slider. Wait for the device to turn off.If you cannot turn off the device using the slider, press and hold the Sleep/Wake and Home buttons at the same time. When the device turns off, release only the Sleep/Wake button.
    Continue pressing and holding the Home button while you reconnect the USB cable to the device. The device should turn on.Note: If you see the "low battery" screen, let the device charge for at least ten minutes to ensure that the battery has some charge, and then start with step 2 again.
    Continue holding the Home button until you see the "Connect to iTunes" screen. When this screen appears (iTunes icon and USB connector) release the Home button.
    If necessary, open iTunes. You should see the "recovery mode" alert ("iTunes has detected a phone in recovery mode").
    Use iTunes to restore the device.
    If you do not see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Select the iPod in iTunes and choose "restore from backup".

  • Can i use a 85 watt charger for my macbook pro that came with an 60 watt charger?

    My charger broke a few weeks ago and i ordered another one on amazon and that broke within a week so i'm going to just buy another one from the apple store. But i dont want to wait to order one because i currently cant use my laptop since it died (i dont live near an apple store), but theres a store that sells apple products. they only have 85 watt for the laptops though. so would i be able to use that without ANY issues? I would rather order from the apple store than to buy something that can cause problems, so i just want to know if my macbook will be safe if i use an 85 watt instead of the 60 watt, which is what originally came with my laptop. Thank you.

    An 85 watt charger will be fine. Generally, you can use a higher-powered charger than the one that came with your MBP - but using a lower-powered charger is not recommended.
    Matt

  • When i plug in camera memery into f it tell me that i have to reformat the drive befor it can be use

    when i plug in camera memery it tells me that i have to reformat f drive and then it says it cant

    Hi,
    Where do you plug the card to ? What is it ? Is it a computer ? What is its model ? What is its Operating system ? Millions and millions of devices are out there ! My suggestion: use other computer to copy files on the card out and reformat that card using the CAMERA, not computer.
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • "iTunes cannot connect to the iPod "Lee" because itis locked with a passcode. You must enter passcode on the iPod before it can be used with iTunes."   ----HELP--- nothing lets me put a passcode. i have totally uninstalled and ALL THAT!!!!   ANYBODY

    PLEASE HELP

    Try to reset your iPod using the recovery mode as described in this support article
    However, this will erase the iPod completely. If you have an iTunes-backup on your computer you can restore your iPod settings later from the backup.
    I have never tried this in WIndows, however. The procedure might be slightly differeent.

Maybe you are looking for

  • Flash page scrollbar.

    Pleeeeeeaaaaaaseeeeeee Help! I have a flash movie which is taller than the browser window, but rather than it being scrolled by the browsers default scrollbar I want to create a scrollbar swf file which will control the scrolling of the movie within

  • Backup - BR0274E File '.../sap.ora' not found

    Hi, I've got following error message in our backup protocol. BR0051I BRBACKUP 7.00 (26)                                            BR0055I Start of database backup: bdxjfifx.anf 2008-02-28 20.00.01    BR0484I BRBACKUP log file: /oracle/P02/sapbackup/

  • Skype Personal Phone Number

    I just got a Skype personal phone number.  At least I think I did.  I selected a number and was told that this now was my new new number, but no panel flashed up for payment.  I have an annual subscription already so I figured that they just used my

  • JSPM not showing all the packages,

    Dear All, I am upgrading the Java stack from 700 SP 015 to 701 SP 003 using JSPM. I have downloaded all the packages including stack.xml file and placed in EPS/in directory. To start the upgrade, I selected Support and Enhancement Package Stack. But

  • Using "Save as PDF" changes fonts

    I have some documents in czech in FrameMaker 12. When I print to pdf the documents converts all right, but when using "save as pdf" all arial fonts are replaced with Times New Roman and the entire process seems to use a lot of time and computer memor