Am useing a PC. Have Photoshop CS5, suddenly cannot move Raw files from bridge (or anywhere else) into photoshop. Jpeg move into photoshop ok, did get error message 1 what do I do to correct this om bridge (or anywhere else for that matter)

Useing a PC
Have Photoshop CS5
Suddenly cannot move Raw Files from Bridge (or anywhere else) into photoshop.
I Can move Jpegs into ps the only issue is with Raw files
I did get error1 message but as do not know what that means its no help
any suggestions?

Sorry for the late reply. My email firewall has become a little over zealous & sent a lot of my emails straight to my junk email folder, so I have only just now discovered your reply in my junk mail folder.
The only "don't open files exceeding xxx megabytes" instruction I can find in my Prefs, is in the Bridge Prefs for Thumbnails, & mine is set at 1000mb. The biggest files I handle are bigger than 200mb so I should be able to open a few, not just one.
However, this doesn't explain why I can open a psd format file of 180mb, close it, but then can't open a RAW format file of only 26mb immediately after.
I can open the RAW file only if I restart my computer - very annoying!
However, thanks for the advice about the video card & memory.
So, I'm still stuck as to what the issue is.

Similar Messages

Photoshop CS5 will not open raw files from Nikon D810. What do I need?

Photoshop CS5 (bought in 2011) will not open raw files from Nikon D810 (bought in 2014). Is there a patch? Is there something I can do?

YAY!!! Success. Thanks Jim. I have the raw file for this image. ABC OPEN: Dancing water spouts in severe weather I'm such a noob, I hadn't even set up the correct date on the camera.
ABC OPEN: Dancing water spouts in severe weatherFran McFadzen captures a once in a lifetime photo of two dancing water spouts near Rockhampton.
View on open.abc.net.au
Preview by Yahoo
From: JimHess <[email protected]>
To: Fran McFadzen <[email protected]>
Sent: Monday, 26 January 2015, 10:20
Subject: Photoshop CS5 will not open raw files from Nikon D810. What do I need?
Photoshop CS5 will not open raw files from Nikon D810. What do I need?
created by JimHess in Adobe Camera Raw - View the full discussionThank camera requires Camera Raw 8.6 which isn't compatible with Photoshop CS5. But you can download DNG converter 8.6 or newer and create digital negative (DNG) copies that will be compatible with Photoshop CS5. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7130665#7130665 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7130665#7130665 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Adobe Camera Raw by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Photoshop CS5.1 Stopped opening RAW Files from Rebel T4i.

I have Photoshop CS5.1 and it has stopped opening my RAW files from my Rebel T4i. It was working the other day just fine. I have tried to download the plugins that othes said will make it wotk; but nothing has worked so far. Also, it said that all my updates are up-to-date. Can someone help me figure out what plugin I need for make this work again?
Thanks, Julie

Camera Raw plug-in | Supported cameras
On that list it says that it requires ACR 7.1 with CS6/ LR4.1 respectively, so whatever allowed you to open those files was possibly a trial version of these products that allowed the components to work. Short of buying one of the two it will never work natively in CS5.
Mylenium

Raw files from the new Nikon D810 will not open with either Photoshop CS5.1 or Lightroom 4. When will a real Adobe solution be available to work with Raw (NEF) files in their native format, using CS5.1 and LR4?

Raw files from the new Nikon D810 will not open with either Photoshop CS5.1 or Lightroom 4. When will a real Adobe solution be available to work with Raw (NEF) files in their native format, using CS5.1 and LR4?

Clarification: this is a user forum; you are not addressing Adobe here.
The answer to your question as phrased is: never.
CS5 is history and it is not longer supported. There will not be any updates or bug fixes for CS5.
You need to convert the raw NEF files from your D810 to raw DNGs using the free, standalone Adobe DNG Converter 8.6 RC (beta), the first version ever to support that camera..

My photoshop cs5 will not recognize raw photos from my canon eos 70d

my photoshop cs5 will not recognize raw photos from my canon eos 70d

No. DNG is a RAW format. There are a few small manufacturer specific items that are left out when converted to RAW (for example, Nikon's Active D lighting) that aren't maintained, as well as some Meta data and focus points, etc. Personally I never noticed the difference, but perhaps some do. There is no impact to the image quality, you have just as much post production freedom with DNG.
I did it for a couple years before upgrading to CS6. It's an extra step, but you get used to it and it's not a huge deal. I would put my card in my reader, and download to a temp file. While that downloaded I would go to the fridge and grab a beer [Edit - you can substitute the beverage of your choice ]. Then I would run the RAW to DNG converter, and drink my beer. It was usually done before my beer (if not I got another). I saved the CR2 files as a backup at first, but once I got comfortable trusting DNG I stopped doing that.
Another option is to get Lightroom and use that for your developing. You can then send over a TIFF file with the edits. But in this situation you couldn't send the image over as a smart object (I think, I assume this would use ACR?).

I am trying to install SC6 Photoshop and Bridge on a new Mac laptop. Though I have the software the laptop doesnot have a disk drive so I copied it from my desktop and transferred it via a portable hard drive. I get a message: Configuration error. Peas

I am trying to install SC6 Photoshop and Bridge on a new Mac laptop. Though I have the software the laptop doesnot have a disk drive so I copied it from my desktop and transferred it via a portable hard drive. I get a message: Configuration error. Please uninstall and reintall... Error 16

Hi midtone,
Is it possible to download the product? It seems that copying didn't work.
If you can download then please use this link: Download CS6 products
-Ankit

Do I have to buy a new version of Photoshop Elements (have Elements 10) just to upload RAW files from my new Olympus E-M10?

I have Photoshop Elements 10. It appears that I need a plugin to upload RAW files and the plugin necessary for my new Olympus E-M10 is not compatible with version 10. Am I getting this right? Do I have to buy a new version of Photoshop Elements just to upload RAW files from my new Olympus E-M10? Otherwise, what I have is all that I need.

Which operating system are you using?
If your using mac os x 10.6 (snow leopard) or windows xp or vista, then the below solution will not work and you shouldn't try to install the dng converter 8.5
You could use the free Adobe DNG Converter to convert your files to dng copies which should then open in pse 10.
windows:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Adobe DNG Converter 8.5
mac:
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Adobe DNG Converter 8.5
how to use the dng converter
Camera Raw: How to use Adobe DNG Converter - YouTube

Cannot download RAW files from Nikon D800E into CC Photoshop?

Cannot download RAW files from Nikon D800E into CC Photoshop?

This is not the same question you posted earlier:
"I am having difficulty transferring D800E NEF files into Adobe RAW format to use in Photoshop CC? What to do?"
Perhaps give steps you are trying.

I have Elements 9 and cannot download NEF files from my new Nikon1 v1, any help appreciated

I have Elements 0 and cannot download NEF files from my new Nikon1 V1, any help is appreciated.

PSE 9 is too old for any of the versions of ACR that support the 1 V1. You have three options:
1. Upgrade to PSE 10 or 11.
2. Use the Nikon software to convert the raw files and send the resulting tiffs to PSE for further editing.
3. Try the free Adobe DNG converter, and you should be able to open the resulting DNGs in your version of ACR.
Windows:
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5486
Mac:
http://www.adobe.com/support/downloads/product.jsp?product=106&platform=Macintosh

Can Photoshop Elements version 13 handle raw files from Canon camera 7D mark 2? Where can I read about it on Adobe web site?

Can Photoshop Elements version 13 handle raw files from Canon camera 7D mark 2?
Where can I read about it on Adobe web site?
I found an Adobe web site note that raw plug-in version 8.7 will support Canon 7D mark 2, but is not included in Elements version 11.

Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications

Photoshop CS4 will not read Raw files from Nikon D60. [was: No automatic updates for my PS CS 4 on windows (for reading .Nef files)?]

Hi
I have been using PS CS4 for several years.
Yesterday, I went to PS CS4 help and selected "updates", but I get the message "There are not updates available at this time; Please note that some updates for the following products cannot be determined at this time: Adobe Updater".
I need the updates because I just purchased a Nikon D60 and my Photoshop does not read the .NEF files produced by the camera.
any idea, please?
thanks

I need the updates because I just purchased a Nikon D60 and my Photoshop does not read the .NEF files produced by the camera.
Camera Raw plug-in | Supported cameras
Camera Raw-compatible Adobe applications
Do you really mean the Nikon D60 which shipped in 2008? Was it purchased secondhand?
The Nikon D60 was first supported in Adobe Camera Raw 4.4.
Photoshop CS4 ships with Camera Raw 5.0 so it can read D60 NEF files out of the box. No updates required.
If you do mean the D60 then something else must be going on. e.g. are you using Nikon software to transfer files from camera to computer?

Photoshop Elements 9 and cannot open Raw files from my Canon EOS 1000D camera.

I am using Photoshop Elements 9 on a Windows 7 based PC and would like to know why I cannot open Raw files produced by my Canon EOS 1000D camera.
I have checked the version of the plug in as 6.5 for raw files which is supposed to open .cr2 files and should be compatible according to Adobe site info.
any ideas for next move.
Mick

Hi,
According to all of Adobe's charts, the Canon 1000D should be supported by the basic PSE 9 even without updates. When you said you checked the camera raw version in PSE, did you do that by going to the Help menu and selecting About plugins -> Camera raw?
The Canon 1200D requires ACR 8.4 which is only compatible with PSE 12 - so for PSE 10 your brother would need the DNG converter.
I can't find a sample raw file to try (I do have PSE 9). If you want to upload a sample file to dropbox and give me access, I could try it on my system.
Have you tried opening one of your files on your brothers system?
Nrian

Getting error message "Could not create work area" when I open Bridge CC.

I am getting an error message "Could not create work area" when I open Bridge CC.
I have reset my workspace. I have closed and opened Bridge CC. I have deleted the !!-$$$AdobeOutputModule.workspace file in /Library/Application Support/Adobe/Bridge CC/Workspaces folder.
I am not an expert computer user, so please explain in detailed steps like I am 5 years old. Thanks in advance for any help.

I am experiencing the same problem!
My mac is OS X Yosemite (10.10.1), Photoshop CC 2014.2.1, Bridge CC 6.1.0.115 and Camera Raw 8.7.0.309

Photoshop CS 5.1 and raw files from Sony DSC RX-100 -

I am trying to open a raw file from my Sony DSC RX-100 in Photoshop and get message that it isn't supported. I downloaded the update DNG Converter_8_5.dmg and it still won't let me. What am I doing wrong?

Hi, Marek,
Unfortunately this is a forum for the CommunityHelp application and not a Photoshop forum, so there isn't a way to get an answer here.
Might I suggest that you describe your problem in a Photoshop forum such as:
Photoshop (Mac users) http://forums.adobe.com/community/photoshop/photoshop_macintosh
Photoshop (Win users) http://forums.adobe.com/community/photoshop/photoshop_windows
You can see a list of all Photoshop forums at:http://forums.adobe.com/community/photoshop
--Kirsti
Adobe Community Help and Learning team
Re: PSD file corrupted!

On signing in, get error message 400. How do I fix this?

Problem signing in to Photoshop Elements 9. Get error message 400. Also can't create new user ID. Help!

There is no longer anything to sign in to.
See this for the reason and solution:
http://barbarabrundage.com/2013/09/16/pse-8-9-10-cant-sign-in-error-404/

Am useing a PC. Have Photoshop CS5, suddenly cannot move Raw files from bridge (or anywhere else) into photoshop. Jpeg move into photoshop ok, did get error message 1 what do I do to correct this om bridge (or anywhere else for that matter)

Similar Messages

Maybe you are looking for