AMIE (CMDB) import don't update importand fields
Service Desk 6.2
I made important updates in ZCM11 devices like users (LoginName), serial numbers, Asset Tags, Producers of hardware, etc.
When I push refresh (Import) no changes were made in Service Desk neither in Items nor in AMIE snapshots.
How to ENFORCE updates of ALL important fields?
MIME snapshots were been updated, but the Items didn't.
OK, I think I found the reason.
I have customized import procedure, and have two import "servers". The true is,yhe server is the same, but ServiceDesk assigned some fields to first procedure and others to the second one.
This can be seen and corrected in page User>Configuration>Category>Hardware>Federation
I corrected this to ONE server and will observe.
Similar Messages
-
Import Format script required to update multiple fields
Further to my previous post yesterday (Import Format script required to work across multiple fields I now need my import script to update multiple (two) fields at the same time, based on criteria set across multiple fields. So far, I can use DW.Utilities.fParseString to assess the values across multiple fields, but I now need to update not only the field in question, but also an additional field at the same time. For example:
Function TBService(strField, strRecord)
' How do I update a second field at the same time?
Dim strField2 As String
If Left(strField, 1) = "S" Then
If DW.Utilities.fParseString (strRecord, 3, 8, ",") = "B1110" Then
strField2 = "N101"
Else
strField2 = "Network N/A"
End If
TBService = strField
Else
TBService = "Service N/A"
End If
End Function
Is this even possible? Should I be looking at creating an event script which would work post-import? Or can this be done right here in the import script?All the logic you require can be encapsulated in the import script for the second field. You don't need to reference the second field in the first import script.
Edited by: SH on May 2, 2012 5:39 PM -
I am updating lines of a Purchase Order throught DTW. I have multiple fields that I want to update. When I do the import it says that that record updated successfully, yet most of the fields are not updating. Here is my POR1 template:
DocNum LineNum ItemCode Quantity Price ShipDate WarehouseCode U_ShipDate
DocNum LineNum ItemCode Quantity Price ShipDate WarehouseCode U_ShipDate
55 0 EEAC-100 5 80 06/23/11 01 05/24/11
55 1 EEAC-100 4 80 07/23/11 01 06/23/11
The quantity field updates fine, but the rest don't update.
Any ideas why?
AlanGordon,
That worked for the dates. Thanks.
For some reason the price still doesn't update.
Alan -
Why does Firefox, like others, feel it's so important that their updated browser have a "brand new look"? I don't want a "brand new look." I'm happy with the look as it is. So I will NEVER go to Firefox4.
Firefox is highly customizable and you can customize Firefox 4 to look like Firefox 3.6, for details see http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6
-
How to update information fields of a profile in Oracle UCM using RIDC
Hi All
I have a requirement in which i need to modify/update the metadata/information fields of a Profile in Oracle Webcenter Content(UCM).
I found out that this can be achieved using RIDC api, but i have little knowledge about the same.
If someone could suggest about how to retrieve and update the fields in UCM using RIDC or some other approach would be of great help.
It's really important.Kindly help
Regards
ACMuser13069455 wrote:
Hi Jiri
Even i have thought about the same as one of the approaches, but i was a bit apprehensive about using this one.
I have few stupid queries regarding this:
1)Will it expose the production database(connection details) to the environment?Yes. If you don't like the idea of giving connection to the database to a "third-party" program, you could go from the other side - create a UCM component (some kind of scheduled job), which will be a part of UCM, but do the same. It will be a bit more complicated, but might be considered more secure.
2)Will it have any performance impact?I don't think there will be much impact - most of time, tables will be accessed in read-only mode (pulling the data out), so except few per cent of CPU and some memory it should not consume anything. Besides, you should be able to schedule upload to "quiet hours", if there are some
3)Will it still be an integration with the UCM?Well, yes. It will be integration at the database level. But honestly, as long as it works, do you care how is it called?
>
Thanks
ACM -
CSV upload and update table fields
Hi,
Is there any way to update any field of the underlying table from HTMLDB while importing the CSV file?For e.g, if there are XYZ table have 200 ermployee where empno is primary key.
Once we upload the data from CSV its fine.Now after 2 weeks i need to update the sal and ename corresponding to the previous 100 employees only.So now when i trying to update the data a unique constraints violation occurs since the empno have already present so my concern is that -- how to get out of this problem specially when updation of huge no. of records needed and also no updation required for some records already present?Do the CSV update be helpful on that circumstances?
One thing we can do that we can track down the list of 100 employee whose information going to be updated.Put those info in excel and add rest 100 emplyee to that excel and again doing the CSV upload ?
This is a huge issue and not only the tedious task but also errorprone and that task will be increased with the amount of data increasing in the table.
Please anyone can suggest ?
Regards,
ROSY.The best way to solve your problem is next way.
1º) Save the file with the data to import like a BLOV ITEM.
Ok it can be done. CSV placed on BLOB data field.2º) Make a procedure to manage this BLOV item that can be fired by user pushing a buttom. (you can do it easy from HTMLDB).
how to manage ? What need to be fire to push the CSV to the target table with the actual field population ?3º) Into this procedure insert the records freely and dont worry for anything more. (maybe you can be worry about duplicate records is so, only, into this same procedure make any pl/sql lines to be sure record is not duplicate before insert)
? ? ? If the data already exist it should be needed to truncate before insert that is not my reqr rather the existing data should be updated based on PK if any chages occurs in the CSV fo that data.4º) after you are sure the insert work properly and if you need any other treatment to record, with a trigger in the table or calling any other procedure from the same trigger make the traeataments that you need.
that can be done highly .......before insert trigger.Remember. Dont put any commit.
sure.......5º) Go down from horse. Dont take coffe or Tea in exceed. And remember all we are the same, people that only want go to eat with childs in week-end.
i m in land no way to go down........nothing i take ya eat & eat much ....but this is not the right place for making comments about Weekend....Regards and good luck.
anyway embargo starts...........enjoy Cheers...........Wish u All Hp XMas... -
How does the Updated by Field Work....
Hi Experts,
Can anyone help on how the *Updated By* field values are populated, specially when the values are updated through a Workflow.
I read the following in the MDM Documentation.
If trigger action is Record Add, Record Update, or Record Import for a workflow. The [System] is the creator and launcher of the job but is not a real user.
This is even true if the Owner of the workflow is the Admin.
After our server migration was done, instead of showing [System] as the Updated By it now shows the Admin.
What could be the reason for this. Do i need to contact SAP or is there something that needs to be done at the respository level to get the Updated By field to work as expected.
Regards,
Aditya.Hi Aditya,
As far as i am concerned, this is not true. Field Updated by type of User Stamp should only show user's which are there in User's table of MDM console under node Admin-->Users. When we don't have any User of repository with name System, there is no point it will show you user System for field Updated by.
Query 1: Can you please confirm, do you have this User "system" available in your repository under node admin-->Users in MDM console ?
Query 2: Also, After our server migration was done, instead of showing System as the Updated By it now shows the Admin.
I seriously have doubt on this. Can you please check do you have really user System for existing records too? I mean you can do Free-form search for field Updated by with value system. I am sure even for existing records (whether in before server migration or in existing) you will not get single record with field updated by "system" . Can you please confirm on this ?
May be I am wrong, so kindly revert with your findings and confirm above both queries..?
Regards,
Mandeep Saini -
Join all 5 HR (pa0000,pa0001,pa0002,pa0007,pa0315) to update MASSN field?
Hi Gurus,
Need some guide here on HR master data updates. I have a requirement here to update Action Type(MASSN) using these tables mentioned by using 'HR_EMPLOYEE_ENQUEUE' & 'HR_INFOTYPE_OPERATION'. Should I first do a join statements for all these tables and update the fields at the end of my program or should I use these fm as and when my requirement validation is done?Appreciate it alot for your guide to clear my confusion.
Thanks.Hello Experts,
Im stuck again right now
I have gathered all the 5 tables data into a itab, but then the tables are updated using the 3 FM
a) HR_EMPLOYEE_ENQUEE
b) HR_EMPLOYEE_OPERATION
c) HR_EMPLOYEE_DEQUEUE
But the thing is, it has to meet the conditon of action type (MASSN) before updating the tables, for my case i have 3 scenarios,
Change, Leave & Hire.
itab_final -pa0000: Hire -
>call 3 FMs to update?
:Change -
>call 3 FMs to update?
: Leave -
>call 3 FMs to update?
-pa0001 (same scenario's as above)
-pa0002
-pa0007
-pa0315
So in this case, i will be calling the function modules 15 times and its gonna create a haewok...but wat is the best way to do this update??please advice
if not gt_itabfinal[] is initial.
sort gt_itabfinalby recty.
loop at gt_itabfinalinto wa_updtab where recty eq 'H'.
"table pa0000
wa_pa0000-pernr = wa_gt_itabfinal-pernr.
wa_pa0000-begda = wa_gt_itabfinal-begda.
wa_pa0000-massn = wa_gt_itabfinalb-massn.
if not wa_updtab-endda eq ''.
wa_pa0000-endda = gt_itabfinal-endda.
else.
"do nothing.
endif.
append wa_pa0000 to gt_pa0000.
clear wa_pa0000.
endloop.
CALL FUNCTION 'HR_EMPLOYEE_ENQUEUE'
EXPORTING
NUMBER = gt_pa0000-pernr
IMPORTING
RETURN =
LOCKING_USER =
CALL FUNCTION 'HR_INFOTYPE_OPERATION'
EXPORTING
INFTY = 0000
NUMBER = gt_pa0000-pernr
SUBTYPE =
OBJECTID =
LOCKINDICATOR =
VALIDITYEND =
VALIDITYBEGIN =
RECORDNUMBER =
RECORD = gt_pa0000
OPERATION = 'INS'
TCLAS = 'A'
DIALOG_MODE = '0'
NOCOMMIT =
VIEW_IDENTIFIER =
SECONDARY_RECORD =
IMPORTING
RETURN = return
KEY = key
CALL FUNCTION 'HR_EMPLOYEE_DEQUEUE'
EXPORTING
NUMBER = gt_pa0000-pernr.
endif.
Really appreciate your kind help -
Error in updating ALV field catalog in selection tool for Planning Book
Hi ,
I am Implementing BADI '/SAPAPO/SDP_SELECTOR' to upload Custom Fields Data in Planning Book Selection Window under APO Location Product. These Custom Fields are maintained in Custom Table.So from Table whatever Custom Fields are availabe all the fields needs to be available in for selection. Once selection is done the same data to be uploaded into Planning Book.
This BADI is working Fine upto 4 fields but if any extra fields are added in the table 'Error in updating ALV field catalog in selection tool' error Pop Up is coming. Here i am using Folloowing Methods
1). INIT_OBJECT_LIST
2). F4
3). LOC_PROD_VALUE_LIST
Please help on the same if u have any idea or clue.
Thanks.Hi Srinivas!
Where did you get your implementation from?
It would be nice if you could debug your code!
For the F4 method, have you seen this note?
Note 544904 - Sample source code f.BAdI /SAPAPO/SDP_SELECTOR ('F4'method)
Also check this note. It contains selection modifications in the BAdI:
Note 376902 - SDP selector: Basis corrections for BADI
I do not know your release and support package in your SCM, but you can find a lot of notes related to this BAdI.
Thank you!
Will
SCM Support Consultant -
Update PRODH field from table T179T
hi,
i want to update PRODH field from table T179T into table VBRP. for this we
need to take selection option also.
selection option will be :
· Sales Organization (field VBRK-VKORG)
· Billing Date Range (VBRK-FKDAT)
· Distribution Channel (Vbrk-vtweg
while i have done this for one field by using hard code but like:
TABLES: VBRP.
CLEAR VBRP.
UPDATE VBRP SET PRODH = 'PLC01' WHERE VBELN = '0008300051'.
SELECT SINGLE * FROM VBRP WHERE VBELN = '0008300051'.
WRITE: VBRP-VBELN,VBRP-PRODH.
but this is not the right way. please guide me how to solve this.TABLES: VBRP.
CLEAR VBRP.
UPDATE VBRP SET PRODH = 'PLC01' WHERE VBELN = '0008300051'.
<b>commit work.</b>
SELECT SINGLE * FROM VBRP WHERE VBELN = '0008300051'.
WRITE: VBRP-VBELN,VBRP-PRODH.
use commit work after update statement.
But this code would make vbrp-vbeln as plc01 only.
If you want to get the prodh value from t179t, then write a sleect on t179t and then update.
TABLES: VBRP.
CLEAR VBRP.
select single prodh
from t179t
where......
UPDATE VBRP SET PRODH = t179-prodh WHERE VBELN = '0008300051'.
commit work.
SELECT SINGLE * FROM VBRP WHERE VBELN = '0008300051'.
WRITE: VBRP-VBELN,VBRP-PRODH. -
Master Detail Form - How 2 update a field in the Detail form using a query?
Hello,
I have a master detail form with, each master record having a fixed(6) number of detail records. One of the fields in the detail record is the PART_DESCRIPTION field. I am trying to update this field by querying Table_X. TABLE_X is in the format of (desciption id, description). Description id runs from 1 to 6.
When the form displays, the PART_DESCRIPTION field for the 6 detail records needs to be automatically populated with the six values of description stored in Table_X. How can this be done?
Tried using session storage objects, but made no headway.
Would greatly appreciate pointers on how to go about doing this.
Thanks.
DevIf you are on a Portal Version lesser than 3.0.9.8.3, then please try the following to populate
the PART_DESCRIPTION field.
Steps:-
1> Edit the form and go to the Additional PL/SQl section and put the following code in the
"...after displaying the page area" :-
declare
type t_vc_arr is table of varchar2(4000) index by binary_integer;
l_arr_desc t_vc_arr;
l_form_name varchar2(200);
l_form_state varchar2(500);
begin
l_form_name := p_session.get_module().get_name();
l_form_state := p_session.get_value_as_varchar2(
p_block_name => 'MASTER_BLOCK',
p_attribute_name => '_FORM_STATE'
if l_form_state = 'QUERY_AND_SAVE' then
select description
bulk collect into l_arr_desc
from <schema>.table_x;
htp.p('
<script>
var descArr = new Array();
var Fidx = 1;
var formObj = document.WWVM'||p_session.get_id()||';
var fieldName = "'||l_form_name||'.DETAIL_BLOCK.PART_DESCRIPTION.0";
for i in 1..l_arr_desc.count loop
htp.p('descArr['||to_char(i-1)||']="'||l_arr_desc(i)||'";');
end loop;
htp.p('
for (var i=0; i < formObj.length; i++){
if (formObj.elements.name == fieldName+Fidx){
formObj.elements[i].value = descArr[Fidx-1];
++Fidx;
htp.p('</script>');
end if;
end; -
How can I update data fields in a merged document ?
Hi,
I'm looking for a way to update the values of data fields in a merged document with a script just as you can do with the user interface.
I don't find any method like "updateDataFields ()" in the DataMerge object.
Si I try to invoke the menu action "Update Data Fields", but it fails. The script error message is: "Error 53762, the script is not active." On the contrary, the action works if I use the interface.
Can anyone help me?
Thanks in advance,
FredIsnard
PS : I work with CS5.5 and JavaScript.Hi!
You might be looking for this one:
DataMerge.mergeRecords (outputOversetReportFile: File )
Merges records and produces an optional overset report.
outputOversetReportFile: Data Type: File
The path to the file in which to store the overset report. (Optional)
Best regards,
Andreas -
DYNP_VALUES_UPDATE not Updating the Field on my Dynpro
Hi.
I want to create a dynpro where two fields are. Field 1 allows the user to enter a customer number, field two shall come up with a number that is calculated somehow. The calculation can last up to 20 seconds, so I dont want to make the user waite for this number.. .he shall be able to work with the rest of the dynpro.
Therefore I called the function that does the calcuiation like that:
MODULE user_command_0100 INPUT.
DATA: lv_guid_16 TYPE guid_16.
IF kna1-kunnr IS NOT INITIAL AND kna1-kunnr <> gv_kunnr
CALL FUNCTION 'GUID_CREATE'
IMPORTING
ev_guid_16 = lv_guid_16.
gv_taskid = lv_guid_16+8(8).
CALL FUNCTION 'YDETERMINE_DEPOTDISTANCE'
STARTING NEW TASK gv_taskid
PERFORMING receive_depent ON END OF TASK
EXPORTING
i_kunnr = kna1-kunnr.
ENDIF.
ENDMODULE.
The next piece of code shall get the returning value if the function wants to return its results.
FORM receive_depent USING i_task TYPE clike.
TABLES: d020s.
DATA: dyname LIKE d020s-prog,
dynumb LIKE d020s-dnum.
DATA: BEGIN OF dynpfields OCCURS 1.
INCLUDE STRUCTURE dynpread.
DATA: END OF dynpfields.
IF i_task = gv_taskid.
RECEIVE RESULTS FROM FUNCTION 'YDETERMINE_DEPOTDISTANCE'
IMPORTING
e_depent = kna1-yydepent
e_accuracy = gv_accuracy.
MOVE 'KNA1-YYDEPENT' TO dynpfields-fieldname.
MOVE kna1-yydepent TO dynpfields-fieldvalue.
APPEND dynpfields.
dyname = sy-cprog.
dynumb = '0100'.
CALL FUNCTION 'DYNP_VALUES_UPDATE'
EXPORTING
dyname = dyname
dynumb = dynumb
TABLES
dynpfields = dynpfields
EXCEPTIONS
invalid_abapworkarea = 01
invalid_dynprofield = 02
invalid_dynproname = 03
invalid_dynpronummer = 04
invalid_request = 05
no_fielddescription = 06
undefind_error = 07.
ASSERT sy-subrc = 0.
ENDIF.
Problem is: The DYNP_VALUES_UPDATE does not update the field on my dynpro at all. If I hit enter another time, then the field is provided by the value as another PBO will be processed. What is my mistake here?
Regards
Manfred
Edited by: Rob Burbank on Oct 29, 2010 12:07 PMHi Manfred,
Replace all the DYNP_VALUES_UPDATE-related content by the following statement:
SET USER-COMMAND 'xxx'.
While DYNP_VALUES_UPDATE does update the fields, a roundtrip is not triggered so the content of the fields will not be refreshed. The SET USER-COMMAND does that.
Hope this helps you!
Cheers, Roel -
BADI MB_MIGO_BADI not updating custom field in MSEG Table
Dear Experts,
I am working on screen exit In MIGO transaction for transfer Posting.
I checked that BADI MB_MIGO_BADI having facility for screen exit and method line_modify having facility to change GOITEM Structure for the changed line item.
Now, to make this functionality work I have enhanced include structure CI_COBL which is available in both mseg table and goitem structure, now I have this customized fields on my custome tab through the enhancement and also to update this value 2 custom fields created in goitem structure and MSEG table through include structure CI_COBL.
Here my question is at the time of transfer posing creation in MIGO when I am passing the value in custom fields through screen and assigning it to custom fields of structure GOITEM through LINE_MODIFY method, it is giving me below worning message
BADI: Field GOITEM-ZZIDNLF is not ready for input. (Change is not taken over)
Now I have debuged the code, also checkout many threads and came to know that because of few checks in standred program (iNCLUDE:LMIGOKL3) these fields will not be updated WHERE IT always checks whether these fields are ready for input or not and if not ready then instead of assigning the values it throws worning message.
Now can you please through some light how can I go ahead as I have check out many threads and also tried to change value of cs_goitem structure using field symbol but throughing dump that it is blocked against changes through field symbol.
The helpful answers will be highly appriciated.Hi,
In the badi mentioned by you GOITEM is the importing parameters & if the relevant field is not used in any MIGO screen you cannot change the data.
Please check example BADI interface: IF_EX_MB_MIGO_BADI~LINE_MODIFY
Please check the BADI documentation:
Changed data in GOITEM is only adopted if the relevant fields are visible and ready for input.
Changed data in GOITEM is not adopted if the relevant field is not used in any MIGO screen (warning via MIGO 049).
Changed data in GOITEM is not adopted if the relevant fields are not ready for input (warning via MIGO 050)
Thanks and Regards,
Chandra -
need to run through a list of old to new data (.csv) file and change them in a sharepoint list - can not make it work
here is my base attempt.
$web = Get-SPWeb site url
$list = $web.lists["List Name"]
$item = $list.items.getitembyid(select from the items.csv old)
$modifiedBy = $item["Editor"]
#Editor is the internal name of the Modified By column
$item["old"] = "new from the .csv file parsed by power sehll
$ite.Syste,Update($false);
$web.Dispose()Hi,
According to your description, my understanding is that you want to update SharePoint field value from a CSV file recursively.
We can import CSV file using the Import-CSV –path command, then update the field value in the foreach loop.
Here is a code snippet for your reference:
Add-PSSnapin Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue
$csvVariable= Import-CSV -path "http://sp2010.contoso.com/finance/"
# Destination site collection
$WebURL = "http://sp2010.contoso.com/sites/Utility/"
# Destination list name
$listName = "Inventory"
#Get the SPWeb object and save it to a variable
$web = Get-SPWeb -identity $WebURL
#Get the SPList object to retrieve the list
$list = $web.Lists[$listName]
#Get all items in this list and save them to a variable
$items = $list.items
#loop through csv file
foreach($row in $csvVariable)
#loop through SharePoint list
foreach($item in $items)
$item["ID #"]=$row."ID #"
$item.Update()
$web.Dispose()
Here are some detailed articles for your reference:
http://blogs.technet.com/b/stuffstevesays/archive/2013/06/07/populating-a-sharepoint-list-using-powershell.aspx
http://social.technet.microsoft.com/wiki/contents/articles/25125.sharepoint-2013-powershell-to-copy-or-update-list-items-across-sharepoint-sites-and-farms.aspx
Thanks
Best Regards
Jerry Guo
TechNet Community Support
Maybe you are looking for
-
When I turn on my Ipod touch it wont do anything but show me a itunes logo and usb plug in pic.
When I turn on my ipod it just shows me a picture of itunes logo and a usb plugin. I plug it in to the computer and nothing happens. Ive tried to reset it and it still wont do anything. I don't know what to do. Please help
-
How to refer a field in a header as a variable
Hi, Question: Report header has student id display using <?STUDENT_ID?>, how can I refer this field as a variable in the body section to do some if statement? have tried to use the folllowing fashion in the header <?variable@incontext:v_id;STUDENT_ID
-
Issues saving cpvc files in Cp8 - fatal error/hanging
I experience issues when trying to save .cpvc files - sometimes it saves and other times: 1. I either get a fatal error message 2. it just hangs at 40% saved and saying it's not responding Any ideas what could be causing this and, more importantly h
-
Linking Behance with adobe CC has removed all my work/followings
I logged on to Behance today and was prompted to link it with my Adobe CC account, upon doing so I now see that all my work, and followers/followings are gone, and I'm basically back to a blank account. How can I get all this back?
-
SBO2005SP01PL04: Copy UDO's of Type Masterdata from one DB to another
Hi Is this possible somehow? Thanks for any Tipps