Ammendment report

Dear Expert,
if the customer is purchasing the material with some specific price and he had made the payment,
he had made the payment for all the invoice till november, but suddenly the price changes from july so how to make the changes in the invoices and how to make report

Hi Harshal......
Welcome to SAP Business One Forum....
Once you book Invoice you can not change it.
But as you need to pass the price Difference to teh customer you may send him Credit Note......
Regards,
Rahul

Similar Messages

PO Change history for Condition types

Hi All,
I need to develop a PO ammendment report, where my client wants to capture all changes in the PO. I have checked and found that for fields like pricing/ tax conditions and texts SAP does not keep any track of change. Say for example my freight earlier was $100 and now have changed to $200. In report I need to capture against the FReight condition type what was the old value and what was the new value. CDPOS even does not capture in which condition type I have chanegd the value.
Please suggest the way ahead. Is ther any provision to activate change histoty for these fields?
Best Regards

Hi All,
I need to develop a PO ammendment report, where my client wants to capture all changes in the PO. I have checked and found that for fields like pricing/ tax conditions and texts SAP does not keep any track of change. Say for example my freight earlier was $100 and now have changed to $200. In report I need to capture against the FReight condition type what was the old value and what was the new value. CDPOS even does not capture in which condition type I have chanegd the value.
I have also checked with version management. But it does not capture in which condition type I changed the price. It only reflects the changes in Gross and net price. IN CDHDR also it did not capture. Please suggest the way ahead. Is ther any provision to activate change histoty for these fields?
Best Regards

Report for BOM materials

Dear Experts,
i have scenario which i need to capture but do not have any standard report and for that reason i am going in for Z development of the reports. please guide me so as to which field to be pulled to get the desired output.
Scenario:
We create Purchase order with a version control
1. First version has the data which act as baseline and we want to compare rest of the versions as variance
2. If the line item in PO is a subcontracting material with L- then the subcomponents will be present as a BOM
3. when i ammend the PO for the Qty the BOM items also get ammended but do not reflect in the version control - display changes
4. I want to capture the PO with each line item against which there is qty change and also the material BOM change due to qty change.
Is there any table from which i capture the data.
Pl. help me out it would be of great help
Thanks & Regards,
Farhan

Hi
the following tables might be useful
MAST
STKO - Header Table of BOM
STPO - Item Level for BOM
MAKT
regards
maniraj

PO Ammendment and version number

Dear Experts,
We have version management active at out client.
When we save the PO after changes version number is generated and changes are saved against that version number.
We want the report where we can see the Ammendment details in the PO , that is changes thet were made in that particular PO.
What are the tables and which are the fields where we can find these details.
Is there any standard report available where i can see those changes in PO.
Pl. guide.
Best Regards,
Vikram

Hi
I dont think standard report is there to show versions created in purchase orders.
You can use the table EREV, doc type F which shows version numbers with status active or completed..
Thanks

How to create a custom report??

Hi all
I need to create a custom report for my client. I also need to know if the standard reports are not picking up the correct data or is picking up multiple records, then how can it be ammended. Need urgent help.
Thanks and Kind Regards

Hi,
Please refer to following links for better understanding of Reports
http://www.sapgenie.com/abap/reports.htm
http://www.allsaplinks.com/material.html
http://www.sapdevelopment.co.uk/reporting/reportinghome.htm
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305
Regards
Bala

Report on changed Purchase order

Dear group Members
Warm greetings
I am not finding a standard report where i can view list of all changed purchase orders
help me to find this report, i will be very thankful to you
regards
shamul heq

hii Shamu
In standard SAP , there is no reports particularly for ammendment Po list.
But individual PO u can see the chages happened in that PO's one by one.
GO to ME23N , the go to environment, then header chages here u can find the list of changes happened in PO.
If u need the report , u can create custom report with help of technical consultant.
Thanks
SAp-MM
Edited by: MM group on Feb 25, 2010 5:29 AM

Ammenment PO report...?

Hi gurus
Can anybody help me to get a report on Ammendment PO'S , monthly wise .yearly wise ..etc.
Any standard Report is there to get ammendment PO reports.
Its urgent ..
Thanks
sap-mm

If you want a report that shows number of changed POs, then you have to develope this report by yourself, based on entries in CDHDR and CDPOS.
It will probably have very long runtimes.

Po ammendment fields.

hi everybody's...
i want to depict the old effective date , price and new effective date for the particular material in alv. but i dont know where and whats the field name and table name for these above. this is po ammendment problem..
plz rectify this and where it is available...
regards
surender...

Hi,
If you want table name and field names of changes then refer following;
You have to develop a report for this using tables CDPOS and CDHDR
Use following tables;
CDHDR - Change document header
CDPOS - Change document items
Go to SE11 / SE16 / SE16N, here enter Object value as "PO No" in Table CDHDR and get the Document No and then input this in CDPOS and get the changes details. You can also enter EKKO and EKPO tables and see the whole list.
Refer link;
[Change SAP documents -- tables CDHDR and CDPOS|http://www.sap123.com/showthread.php?t=47]

ABAP report to use in analysis of Kanban Control Cycle

Hi Experts,
I have requirement to develop a new custom report 'Kanban history'.
When someone makes a change to transaction 'PK02', we need to have Kanban History of that change in our new custom report. Also, when someone makes a change to transaction PK13N or PK12N on a kanban correction, we need to capture that history to be able to followup on status changes or kanban corrections made from that screen.
As an example, this kanban history report can be displayed much like the material master history is displayed.
I need your suggestion to achieve this requirement.
Thanks,
Leo

Hi Leo,
1. Create a Ztable with the fields you want to capture.
2. Find some EXIT's/ BADI or Enhancment points in the t-codes during SAVE.
3. Save ammendments done using the t-code to your Z table .
4. Develop report based on the data you have in your Z table.
I also had a similar requirement to capture the PO ammendment data and display in custome reports
same logic worked
Hope this helps.
Regards
Bikas

List devide into deferent spool and generate no of PDFs using single Report

hi,
i am writing a program which is generating the ammendment data for each vendor,i am generating a pdf and i need to send it to perticular vendor mail. i am facing problems,
1.in a single program i need to get the ammedment data for every vendor (LIFNR) respective Material (Material).
2.pdf should generate for each vendor saparatly and i should send to perticular vendor mail.
i am facing prob ..in generating a single report for all vendor,and devide those to seperate spools.
can any one help me out in this??
Thanks,
DPK.

hi Sandra ,
please can you give some clear picture on this??
here i am sending my dispaly part..
loop at it_finaltmp into wa_finaltmp.
     WHERE lifnr = wa_final-lifnr.
*at new lifnr.
      on change of wa_finaltmp-lifnr.
        write: /1(80) sy-uline.
        write: /1 '|','Supplier Code:',
                       wa_finaltmp-lifnr, 80 '|'.
               it_final-lifnr, '|',
        write: /1 '|','Supplier Name: ',
                    wa_finaltmp-name1, 80 '|'.
        write: /1(80) sy-uline.
        loop at it_final into wa_final
          where lifnr = wa_finaltmp-lifnr.
          on change of wa_final-matnr.
            write: /1 '|','Material:',
                          wa_final-matnr, 80 '|'.
            write: /1 '|','Dicription: ',
                          wa_final-maktx, 80 '|'.
            write: /1(80) sy-uline.
            write: /1 '|', 2(5) 'Plant',
                      8 '|', 9(10) 'PO No',
                    80 '|'.
            write: /1(80) sy-uline.
            sort it_finaltmp1 by matnr ebeln. " DESCENDING.
            loop at it_finaltmp1 into wa_finaltmp1
              where matnr = wa_final-matnr.
              write: /1 '|', 2(5) wa_finaltmp1-werks,
                         8 '|', 9(10) wa_finaltmp1-ebeln,
                       80 '|'.
              write: /1(80) sy-uline.
            endloop.
          endon.
          clear wa_finaltmp1.
          clear wa_finaltmp.
        endloop.
      endon.
and my selection part::
perform get_lifnr.
perform display_data.
perform get_emaildata.
new-page.
commit work.
new-page print off.
end-of-selection.
if sy-batch eq 'X'.
    perform get_job_details.
    perform obtain_spool_id.
    perform convert_spool_to_pdf.
    perform process_email.
please can u give a clear picture wr can i call my spool performence in loop.
thanks,
PK.

ANM VA - run perl script to obtain and genarate reports.

Good day,
We have a customer who has an ANM deployment at a site. This is a HA deployment on RedHat. The customer created a perl script to run off an external host to generate reports. This was acheievd by querying the sqldatabase (dcm_ems). ANM version is 3.2. No problems.
An additional ANM deployment was done on another site. ANM version 4.2. This deployment is the VA edition. They would like to deploy and run the same perl script.
Is this possible on the VA Edition? Even with the RootPatch? Not sure of the level of access the patch provides, or if it is even recommened or would then still allow for the ANM to be supported? If possible, has the sqldatabase structure changed (suppose would need this for the guy's to ammend the script)? How would we obtain the "sqluser" and "sqlpwd" info for the perl script to use?
Appreciate any guidance or feedback.
Thank you in advance.
Paul.

Hi esteemed forum members,
Any ideas or feedback anyone?
Thanks.
Paul.

Re: Column is not getting displayed in the BI report

Hello Gurus,
I have developed a BI report with more number of parameters.
Case 1:
When i run my report , I am able to see data for particular condition but one column doesn't show any thing. All the rows in the column are blank.
Case 2
I tried to put the blank column as parameter, The Program works with out displaying that column data.
I am not sure where it is going wrong. I tried running the code in toad and i am able to see the data.
I have checked the code, Parameter description, length, Template and data definition.
Please help.
Thanks,
Sreekanth

Hi ,
For that column did u changed any alias name in the query...
check ur template once by loading the xml data...
check that column form field that matches with the xml tag or not..
Thanks,
Ananth

Open and cancelled Quote Report

Hi,
Can anyone give me the information for getting open and cancelled Quote Report?

I hope you are using reason for rejection for cancelling quotations. If that is the case, you can use transaction VA25 to view the list of quotations. Here you can filter on two columns status and reason for rejection to view the report as per your requirement.
Regards,
GSL.

Print Quote Report

Hi All,
I have a requirement to develop the custom print Quote Report. When i review the standard pring quote report ,I found a call like <?call-template:TermsTemplate?>.
This statment itself is getting all the Terms and Conditions for that report. when i looked in the ASOPRTXSL.xsl, I see the below statement
<xsl:template name="TermsTemplate">
<xsl:call-template name="PrintContractTerms"/>
</xsl:template>
I am pretty new to XSL, dont know what's happening here. Please help me ASAP
I have also posted this question in BI Publisher but did not get any respose . Please Help
Thanks

If you want to create a custom report using concurrent program then refer:
http://apps2fusion.com/apps/apps/63-xml-publisher-concurrent-program-xmlp
If you want to create a custom report using OAF page then refer:
http://apps2fusion.com/at/51-ps/260-integrating-xml-publisher-and-oa-framework
-Anand

XML Quote report

We have a problem with our XML Quote report that cuts off the report at 26 pages when it should go to about 200 pages.
We have another report the Acknowledge Quote and it works fine.

Finally we found the solution for this problem.
1. Open qotSCocPrint.jsp and add below line inside <SELECT id="qotOutFrmt" name="qotOutFrmt"> statement. This line should be added after "for" loop.
<OPTION value="EXCEL">Excel Format</option>
We can add as many options the XML Publisher supports.
2. Decompile oracle.apps.aso.print.webui.MainCO.class (Controller).
Change the below line
httpservletresponse.setContentType("application/pdf");
to
httpservletresponse.setContentType("application/"+quoteOutputFormat.toLowerCase());
Take a backup of the original file, compile the java in the same directory.
3. Decompile oracle.apps.aso.print.server.PrintQuoteAMImpl.class and change this line
Field field = class2.getDeclaredField("OUTPUT_TYPE_PDF");
to
String outputFormat="OUTPUT_TYPE"+as[12].trim();
Field field = class2.getDeclaredField(outputFormat);
Bounce Apache and generate the Quote output in desired format.

Ammendment report

Similar Messages

Maybe you are looking for