ABAP report to use in analysis of Kanban Control Cycle
Hi Experts,
I have requirement to develop a new custom report 'Kanban history'.
When someone makes a change to transaction 'PK02', we need to have Kanban History of that change in our new custom report. Also, when someone makes a change to transaction PK13N or PK12N on a kanban correction, we need to capture that history to be able to followup on status changes or kanban corrections made from that screen.
As an example, this kanban history report can be displayed much like the material master history is displayed.
I need your suggestion to achieve this requirement.
Thanks,
Leo
Hi Leo,
1. Create a Ztable with the fields you want to capture.
2. Find some EXIT's/ BADI or Enhancment points in the t-codes during SAVE.
3. Save ammendments done using the t-code to your Z table .
4. Develop report based on the data you have in your Z table.
I also had a similar requirement to capture the PO ammendment data and display in custome reports
same logic worked
Hope this helps.
Regards
Bikas
Similar Messages
-
How to use report designer using bex analyser give screenshots details
how to use report designer using bex analyser give screenshots details
Hi,
As per my understanding you want to see Query Designer when you execute the query in BEx Analyzer.
When you launch BEx analyzer,you should be able to see new tab of "Business Explorer" in your Toolbar.
So,when you execute the query in BEx analyzer,in order to goto query designer screen,click on Tab "Business Explorer",select option "Change Query" and then select the option "ChangeQuery (Global Definition)".
It will open the query designer in which you can modify the query and save it.
Regards,
Nilima -
How to use report designer using bex analyser ineed screeenshots steps
how to use report designer using bex analyser ineed screeenshots steps
Please try to search and stop asking for all types of screen shots. Thanks!
-
Hi team,
I was referring the below statement to understand the control cycle.
The Kanban Control Cycle business object is used to control the flow of information and material between the demand source and the supply source in a pull environment. It controls the material quantities in production. It defines a loop between demand source and the supply source for recurring replenishment.
In the above statement, it is mentioned that, it is linking the demand source and supply source. In SAP, how we are linking the the demand source and supply source?
While creating the supply area in PK05, we are providing the storage location. Is this supply source or demand source?
In SAP, where we are assigning the another source (supply / demand source)?
Regards
pskHello Mario,
Thank you very much for your detailed explanation on storage bin and container.
1. So, if the storage location is not WM managed, there will not be any storage bin. The storage location itself will act as a storage bin. Am i right?
You said that, Containers are the physical means in which materials are kept in this process. a container usually equals a KANBAN. Normally there are at least two (but can be more) containers in a control cycle.
2. We are using pallets to replanish the supply area storage locations (production store which is near to work center). So in this example, the pallets are called as "containers". Am i right?
Consider the below example:
3. In control cycle i have maintained the number of kanban as 4. As you said above, i need to maintain 4 containers. But i have only one field to maintain the container. How to maintain 4 containers in one field?
Thank you.
psk -
Deletion of KANBAN control cycle
Hi All,
I need to delete a KANBAN control cycle which is the TCODE used for doing so , another problem is that the control cycle is created with the TCODE PK01 and the sypply area is a ware house related one .
Thanks and Regards,
Mallik.Hi,
Delete the Kanban control cycle with the Transaction: PK02.
Control Cycle --> Delete Entry (Shift+F2)
Best Regards,
Siva -
BAPI /FM to create /change KANBAN control cycle
Hi
Is there any BAPI or FM to create or Change control cycle?
Thanks.Check
BAPI - BAPI_KANBANCC_ADDEVENTDRKANBAN
Short Text
Create Event-Driven KANBAN for Control Cycle
Functionality
With this method you can procure a material quantity for a control cycle. To procure this material quantity one or more kanbans are created in the control cycle and set to status EMPTY.
The essential entry parameters are:
o Control cycle (if the function module is called as a method for the object kanban control cycle, this parameter is not available, but given by the object.
o Material quantity
Information about the status change is issued.
COMMIT and ROLLBACK WORK: the function module does not carry out any COMMIT work. Command off. This must be ensured by the initiator after ending the function module. Each time the function module is called, a COMMIT WORK must take place. It is not permitted to call this FM several times and to post the result with a COMMIT WORK. If, during the process,
the FM comes across an error, in some cases the command ROLLBACK WORK wil be carried out. In these cases the kanban is either set to ERROR status, or in the parameter RETURN an error message is given.
Hope this helps.
Regards
Vinayak -
User Exit for PKMC (Kanban Control Cycle)
Dear Gurus,
I need to know if there is a user exit in PKMC (kanban control Cycle) to create a extra tab next to the print control tab in the bottom.
Best Regards,
KumarList of exits available.
Enhancement/ Business Add-in Description
Enhancement
MPKR0001 Customer fields in kanban control cycle
MPKP0002 Customer-Specific Fields Call Interface
MPKP0001 Customer Defined Display in Kanban Board
MPKD0001 Kanban output as EDI
MPKCCY02 Customer Error in SumJC Control Cycle
MPKCCY01 User-Defined Fields in Kanban Control Cycle (PKMC)
MPKC0001 User exit for kanban calculation
MPKB0002 Customer defined display in kanban board
MPKB0001 User's own functions in the Kanban processing
Business Add-in
BADI_PVBE_UPDATE_APO PVB Publish Changes to the APO
MPKC_REQ_SELECTION BAdI for Requirements Selection for Kanban Calculation
PK_CALL_INTERFACE Customer-Specific Fields Call Interface
PK_CCY_SELECTION Selection for Maintaining Control Cycles
PK_REVERSAL BAdI during reversal of Kanban -
KANBAN control cycle quantity changes tracking -reg
Hi,
Which tables and fields are to be used to knwo the changes in the kanban quantities in the control cycle of a part number
for a part number over a period of time what and all changes are done to the kanban quantity we would like to track
how to go about ?
pl guide
regards,
madhu kiranHi,
Try Table PKCH and field PKCMG.This would be your best bet. -
KANBAN control cycle pk01 error
Hi friends,
I am using SAP 5.0 and material is WM activated, getting error while creating control cycle in PK01.
Error -: Storage bin 002 / / does not exist {Message no. PK033}
Note-:it can be solved with PKMC but in SAP 5.0 Pkmc T-code is not available.
Regards
AmitHi,
Check in the material master for the material, whether you have maintained any fixed bin in WM2 for the storage type 150.
Thanks,
JK -
Hello all!
I am trying to create a control cycle for Kanban in my test system. I have created replenishment strategy in Customizing for Kanban and this was transferred all to my test system. When I want to input the address for a vendor it says: Replenishment strategy in plant ... does not exist.
I suppose there must be a problem with my Replenishment strategy which I have created in Customizing for Kanban. I was not sure about what I need to specify. I have specified plant, type of Procurement:it is an external Procurement, working with Scheduling agreements, Order type - LP, GR - 101, Signal lock- 0. These are all information, which I have specified I was not sure about the rest.
Please could anyone help me ??Hi,
I answered to few of the threads, hope it will help you, if required any further info please let us know.
Re: Implementing KANBAN-WM
Re: Creation of control cycles for lean WH
thanks
Om -
Create KANBAN control cycle (PK01) via LSMW
Hi,
Anybody perofrmed control cycle creation via LSMW using BAPI or IDOC method? I need to know the Business object (BAPI method) or Message type for IDOC menthod in LSMW for PK01 tcode.
Thanks.you should enable the F4 search help in your LSMW.
I have it active and found Idoc PKHD5 -
Selection Variables display in report output using BEX ANALYSER 7.0
HI All,
I am using BEX Analyzer 7.0 , I want to display the Variables selected in the selection screen, to be printed in the
Report Output.when i execute the same query in 3.5 , i am getting all hard coded and selected variable values in report output.
But in 7.0 analyzer i am not getting any filter values.can i know the reason for this ? do i need to do any settings ? how to display all filter values in report output.
Thanks and Regards,
JosephHi Joseph,
I feel there might be personalization of variables.
After executing the query click on "Change Variable Values" which is on Bex Tool Bar and there click on personaliztion icon and check if any personalizations are there.
Regards
Ravi -
How to display barcode in ABAP report
Hi Experts,
I want to display the barcode of process order number in ABAP report without using SAP script or smart form. Please let me know how is it possible to display and print the barcode in the ABAP report.
Thanks in advance.Hi,
Please follow the links below
Re: Bar Code Generation in ABAP Report
Create Barcode in ABAP : conversion to PDF
also chk the link below, It also gives info about barcodes..
http://www.mecsw.com/info/appnote/app_024.html
hope it helps
Regards,
Manish -
Abap report for calling abap proxy?
why do we need to write abap report for calling abap proxy? i mean what's the use of abap report and what are the things inside the report ...please give me details about abap report.
Hi,
In SPROXY for your outbound interface you generate the proxy class.
The ABAP report is used to fill the data from the ABAP tables and then trigger the call to XI using this class.
Look into the code in this blog and check what is done,. The data is filled in the report and then the call is made to XI using an object of the class created in SPROXY using the EXECUTE_ASYNCHRONOUS method.
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy
Regards
Bhavesh -
SNC Kanban Issue - Control Cycle Master Data
Hi,
We are testing the SNC Kanban scenario with contracts (PO) between ECC & SNC.
We have created a control cycle for the ECC material and have sent the Master Data to SNC. We are now trying to send over the control cycle info to SNC and are getting hte following message when we run KANBAN_MD_TRANSMIT:
"Kanban control cycle 70666: No address data available; processing terminated"
Any suggestions would be appreciated.
regards.Hi Anjan Bellur
As per the error message, the address details for your supply area are not maintained
Kindly go to the transaction PK05 in r/3 system
For your plant and Production supply area, Shift+F5
Maintain the address details
Then the reported error message will not appear
Best Regards
Vinod
Maybe you are looking for
-
We just set up family sharing on our iPads and we all have$50 of iTunes cards that have been placed on our accounts. Why can no one in the family redeem the money from their itunes cards... Instead being charge ONLY to the "organizers" credit card?
-
We have an Edit computer that IT brought back to us with a newly loaded Mavericks 10.9.4. and a fresh installation of CS6. We also have an added AJA LHi card. Our editor is getting random crashes often while just searching through his clips. When I l
-
Is there ARE-1 & ARE-3 functionality in 4.6c CIN version?
I am working on the roll out of 4.6c.I am facing one problem in CIN. 1. In SPRO ,"Settings under Export regulation" is missing. 2. Excise transaction types (ETT) are not present in CIN: ARE1,ARE3 3. J1IBN01- Creating Excise Bond. 4. J1IA101-
-
"ORA 27102 - out of memory" solution needed
I have continued to receive the ORA 27102 out of memory error each time I try to install oracle 10g on Solaris 10. I have tried such modifications like "projadd -p 102 -c 'eBS benchmark' -U oracle -G dba -K 'project.max-shm-memory=(privileged,10G,den
-
Currency exchange and aggregation question
Hi, My requirement is to calculate the sum falling into intervals like 1) <2 million 2) 5 - 10 million 3) 10-20 million and so on This part is easy. The question is that the intervals can be requested in any currency by the user. Since there r thousa