Amortization Start Date and Amotize flag which table

Hi All,
From which table and what are the fields that I can get the Amoritize Adjustment ( Flag ) and Amortisation start date which I can enable in the books screen of the asset.
Thanks and Regards,
MPH.

Hi,
Thanks for the response, Infact i tried using Complex join in physical layer. I have considered Time table joined with Fact table, and used >= and took and alias of the Time table and joined fact table using <=. When coming to BMM, i am not knowing how do i design this as if i merge the both the time dimensiona and its alias into single table, values will not be correct and if i make them as seperate columns. i can not show the trend as both are different columns.
Can you please let know where i am going wrong.
Thanks

Similar Messages

Modelling Time Dimension with Fact Table containing Start Date and End Date

Hi Gurus,
I have a time dimension with Year till Date. I have a fact table which consists of Start Date, End Date, Person ID, Department ID.
How do i design Time dimension with fact table the below scenario
In the dashboard i have start Month and End month as prompts.
In the report i need to display Count(Person ID) > Start Date and < End Date along the trend.
For instance, i have selected Jan-2009 as start date and Apr-2009 as End Date, then i need to display Count(Person ID) of Jan-2009, Feb2009, Mar-2009 andApr-2009.
I Can not connect Time dimension with only Start Date or only with End Date to get the trend along the months.
Please advice on the issue which i am having.

Hi,
Thanks for the response, Infact i tried using Complex join in physical layer. I have considered Time table joined with Fact table, and used >= and took and alias of the Time table and joined fact table using <=. When coming to BMM, i am not knowing how do i design this as if i merge the both the time dimensiona and its alias into single table, values will not be correct and if i make them as seperate columns. i can not show the trend as both are different columns.
Can you please let know where i am going wrong.
Thanks

Unable to found Bucket start date and bucket end date in OFSAA 6

Hi,
How to find the Bucket start date and bucket end date in OFSAA 6.
I found following tables to mapped to Dim_Result_Bucket but unable to found columns pointing to Bucket Start Date and Bucket End Date.
Tables:
fsi_income_simulation_buckets
fsi_process_run_history
fsi_time_bucket_master
fsi_lr_irr_buckets_aux
fsi_m_alm_process
Kindly let me know the solution.

Hi;
Please check below link which could be helpful for your issue:
https://blogs.oracle.com/ebs/entry/service_contracts_warranty_created_by
Regard
Helios

How to get starting date and ending date of the given Fiscal Period

Hi Friends,
In my Selection screen parameter, I've Fiscal year and Period , I want to get the starting date and ending date with the Fiscal period.
How to get and throught which FM.
Pls advise.
thanks&regards
Sankar.

Hello Sankar,
Check the FM PERIOD_DAY_DETERMINE.
DATA :
         l_periv     TYPE periv,
         l_blart     TYPE blart,
         l_fday     TYPE bkpf-budat,      "First day in period
         l_lday     TYPE bkpf-budat.      "Last day in period
* Fetch the fiscal year variant from T001
SELECT SINGLE periv INTO TABLE l_periv
FROM t001
WHERE bukrs EQ p_bukrs.
* Get first day/last day
      CALL FUNCTION 'PERIOD_DAY_DETERMINE'
        EXPORTING
          i_gjahr              = p_gjahr
          i_monat              = p_monat
          i_periv              = l_periv
        IMPORTING
          e_fday               = l_fday
          e_lday               = l_lday
        EXCEPTIONS
          error_period         = 1
          error_period_version = 2
          firstday_not_defined = 3
          period_not_defined   = 4
          year_invalid         = 5
          OTHERS               = 6.
Hope this helps.
BR,
Suhas
Edited by: Suhas Saha on Jan 9, 2009 2:08 PM

Planned order creation with PDS valid on only order start date and not finish date

Hi All,
We have requirement to allow creation of planned order manually if production version is valid on order start date and not finish date. This is because lead time of order is longer. I refered OSS notes 385602. I could find out solution for this is implementation of OSS note 694140 to change validity mode at activity level to consider start date of first produce activity in validity interval. Problem is even If I create order in APO by implementiong this note planned order is not transfered to ECC and it gets stuck with error production version not valid.
Is there any way in ECC to control this? Any config or customization?
Regards,
Santosh

Nilesh,
I think there is a simple procedural skip happening in your business process. You are right when a planned order is created after MRP it would default assign it to the first available production version. 2options available for us,
1. First use transaction MF50 and do the line loading and assign the quantites to the production versions/Production lines, so that the actual capacity planning is getting completed. This way you can have planned orders with both the production versions and matching to your actual line capacity.
2. Use Quota arrangement concept, to automatically split the Planned orders during MRP for a percentage based on individual production versions.
Now when backflush is performed S225 table is updated and Planned order qty also gets reduced.
Hope this helps....
Regards,
Prasobh

Search on basis of start date and end date

Hi,
I have added two fields 'Start Date' and 'End Date' on a search page.
I have done the VO extension also.
Now, I have to implement search logic to get all the records created in between 'Start Date' and 'End Date' after pressing the 'GO' button on that page.
Can anyone please provide guidance to extend the controller.
Thanks in advance.
Gaurav.

Hi Anil,
Thanks for ur reply.
As per the link, I have written following code in the controller :
package oracle.apps.irc.vacancy.webui;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.beans.table.OAAdvancedTableBean;
public class xxVacancyCriteriaCO extends VacancyCriteriaCO
public xxVacancyCriteriaCO() {}
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
// Pressing the Go button causes the search to be executed.
OAApplicationModule am = (OAApplicationModule)pageContext.getApplicationModule(webBean);
OAViewObject oaviewobject = (OAViewObject)am.findViewObject("XXIrcVacancySearchCriteriaVO");
if (pageContext.getParameter("Go") != null)
String created = pageContext.getParameter("ViewDate");
oaviewobject.setWhereClauseParam(0, created);
oaviewobject.executeQuery();
OAAdvancedTableBean table = (OAAdvancedTableBean)webBean.findChildRecursive("ResultsTable");
table.queryData(pageContext, false);
But while compiling it, I am getting the error as :
"Error(14,42): PerTransactionTopCOImpl not found in class oracle.apps.irc.common.webui.IrcOAControllerImpl in class oracle.apps.irc.vacancy.webui.VacancyCriteriaCO in class oracle.apps.irc.vacancy.webui.xxVacancyCriteriaCO"
Can u please suggest where the mistake is?
Thanks again.
Gaurav.
Edited by: Gaurav on Jan 14, 2011 12:51 AM

Find record insert date and time in a table

Hi All,
I want to get record insert date and time in a table. There is no datetime column in my table. Are there any possibility to get date and time for each record?
Thank You

Thats not easy. If your transaction info still resides on active portion of the log you can use fn_dblog to read out the time at which the transactions occurs. This is useful only if you try it shortly after transaction.
the code would look like this
SELECT *
FROM fn_dblog(null,null)
WHERE [Transaction Name] LIKE 'INSERT%'
OR [Transaction Name] LIKE 'UPDATE%'
Also see
http://www.mssqltips.com/sqlservertip/3076/how-to-read-the-sql-server-database-transaction-log/
http://solutioncenter.apexsql.com/read-a-sql-server-transaction-log/
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

Basic start date and finish date changing in the past

Hello Gurus,
I set the scheduling parameters as " Do not adjust basic dates, dep rqmts to order start " and also assigned the priority to populate the basic finish date. System does calculate the finish date based on the priority and start date as current date but it does allow me to change both dates in past or future which should not happen.
Please do note that I activated the defaulted date as current date as well. Even I removed this mark and did not work.
Please let me know if there is any way to restrcit the changing it alteast in the past.
Mahee

This can be prevented using one the following ways depending upon your needs
---> Set the "start in past" field to appropriate value using transaction OPU7 for order type /Plant combination
---> Make the "Basic start date and Basic end date" fields as "Display only" through the Field selection config for the order type.
---> Use the user exit on "SAVE" of the order to check for the same
Regards
Narasimhan

Function module to find start date and end date of fiscal year for company

Hi,
Is there any function module exist which will provide me start date and end date of fiscal year for company code and fiscal year provided?
Thanks & Regards,
Parag

Hi,
please check this link
it would be very useful
http://www.sapdevelopment.co.uk/fmodules/fms_fiscalyr.htm
Thanks and regards
durga.K

Automatic changing of activity start date and time of planned orders in SAP

Hello experts,
I have a requirement that in the transaction /SAPAPO/SEQ1 for the list of planned orders what ever we get in the sap we have to swap the activity start date and time for two planned orders which we select automatically. For this I have found the BADI "/SAPAPO/SEQ_VISUAL01".
Now i am able to identify the two selected planned orders inside the BADI method SEQGRID_TOOLBAR_OKCODE_HANDLE.
Now my requirement is i have to swap the start date and time for these two planned orders automatically i.e. through BAPI or any FM.
Any idea of any BAPI or FM to change the details of the planned order.
Thanks,
Sanath.

Hi Sanath,
Please check this BAPI BAPI_MOSRVAPS_SAVEMULTI3. This Bapi has the provision of chaning Planned Order & Production Order Data. Also, you can explore more info on available bapis in the T-code 'BAPI'.
Thank you,
Santosh KB.

Org.Assignment Infotype start date and End date is getting wrong.

Hi, When i create a new employee in PA40, in Org. Assignment infotype start date and end date is getting wrong. for eg. When i create an employee on 01.04.2014. In org. assignment infotype its getting like this. 01.01.2014 to 31.03.9999 and 01.04.9999 to 31.12.9999 Two date entries are creating by default.

Hi
Check in the Table - T588Z : Dynamic Actions ,is there any custom routines causing the defaulting dates functionality.
Thanks,
Sreeram

Calculate end date from inputs : start date and number of months

Hello Experts,
I have a start date and number of months from which i need to calculate the end date.
For Eg: start date = 03-12-2008
            no. of months = 48
      Ans: end date = 03-12-2012
Please help me.

requirement is no different from what is stated in the previous thread.
To elaborate further, I'm looking for some Function Module or some relevant alternative to calculate the future date.
Future date is calculated using a start date input and No. of months.
As stated in the example in my previous thread.
For eg:
Inputs to FM    : Start date        : 03-12-2008
                                No. Of months : 48 months
Output from FM: Future Date     : 03-12-2012
Looking forward for your reply.

Updating start date and end date at header level for a contract

As per the requirement I have to create a contract and assign the start date and end date to the contract.
I am using BAPI_CONTRACT_CREATEFROMDATA for creating a contract. I am assigning value for start date and end date for header data of contract in fields
-CT_VALID_F and CT_VALID_T of CONTRACT_HEADER_IN import parameter and also setting the corresponding indicator in CONTRACT_HEADER_INX parameter.
The BAPI executes successfully and does not return any error but when I check the start date and end date for contract in va43 the values are not assigned.
I also want to update the start date and end date for contract in other case for which I am using BAPI_CUSTOMERCONTRACT_CHANGE and passing date values to the same fields as those create but it give me an error while executing. The error is as follows:
Field 'GUEEN' cannot be changed, VBAKKOM 2000000162 ready for input.
Can anyone suggest what can be done for update the date values?
Thanks in advance.
Komal

So are we... The BAPI BAPI_CONTRACT_CREATE has the following importing parameters:
HEADER     TYPE     BAPIMEOUTHEADER
HEADERX     TYPE     BAPIMEOUTHEADERX
VENDOR_ADDRESS     TYPE     BAPIMEOUTADDRVENDOR
TESTRUN     TYPE     BAPIFLAG-BAPIFLAG
TECHNICAL_DATA     TYPE     BAPIMEOUTTECH
Change the HEADER and HEADERX parameters as I have indicated in my first post.
Regards,
John.

Project Start Date and End date

Dear all
I am working in Product Life cycle managerment. PLM dept. will be creating a project in Cproject. I need to find out project start date and enddate for a particular project.
I got one table in PLM server like CGPL_PROJECT and R/3 view VIAOM_CPRO_OBJ. What is the relationship between those two tables.
How can i find out project start date and enddate.
wht's logic?
Anyone help me.

Hi Mittu,
Hope this link will help you http://help.sap.com/saphelp_nw04/helpdata/en/e1/5d9acae75c11d2b451006094b9ea64/frameset.htm.
Regards,
Flavya

Function Module for calculating NEXT MONTH's start date and End date

Hi Friends,
I want a function module which could calculate the next months start date and end date...
Say my input will be like 01.01.2006(start date) it should return
01.02.2006 and 28.02.2006...
IS there any FM for this ... or how to go about this scenario ???
thanks in advance
Cheers,
R.Kripa

Hi kripa,
1. There is no DIRECT Way.
2. We have to do in 2 steps.
3. See this code (just copy paste in new program)
   U can use its FORM anywhere in your program,
   for getting the desired dates.
4.
REPORT abc.
DATA : sdate TYPE sy-datum,
       edate TYPE sy-datum.
PARAMETERS : dt TYPE sy-datum DEFAULT sy-datum.
PERFORM getdt USING dt sdate edate.
WRITE :/ sdate , edate.
INDEPENDENT FORM
FORM getdt USING orgdate stdate enddate.
DATA : mydate TYPE sy-datum.
CALL FUNCTION 'HR_PSD_DATES_ADD_MONTHS'
    EXPORTING
      v_date             = orgdate
      V_MONTHS           = 1
   IMPORTING
     E_DATE             = mydate
   EXCEPTIONS
     NOT_POSITIVE       = 1
     OTHERS             = 2
CALL FUNCTION 'HR_JP_MONTH_BEGIN_END_DATE'
    EXPORTING
      iv_date             = mydate
    IMPORTING
      ev_month_begin_date = stdate
      ev_month_end_date   = enddate.
ENDFORM.                    "getdt
regards,
amit m.

Amortization Start Date and Amotize flag which table

Similar Messages

Maybe you are looking for