Amount and Date in words (Spanish, if logon language is english)

Dear all,
hope sb can help me with my issue.
We have to print within our system for Spain. That means the check itself have to be in spanish.
But we don't have spanish as logon language available. So the logon language is english.
If we print our checks we use the fields
&REGUD-ZALIW&    (for Date in words)
and
&SPELL-WORD&     (for Amount in words).
Unfortunately the words are not in spanish but in english. Additionally the day is not in words at all.
Could anybody help me? How can I get the words in Spanish?
Thanks in advance
Philip

Hi, u have to use this function
CALL FUNCTION 'SPELL_AMOUNT'
    EXPORTING
      amount    = w_dmbtr
      currency  = 'CLP'
      language  = 'ES'
    IMPORTING
      in_words  = w_spell
    EXCEPTIONS
      not_found = 1
      too_large = 2
      OTHERS    = 3.
where w_dmbtr is the amount of the check.
and for the date
but before u need to set up the sy-langu = 'S'. of spanish
after u get the value set it again to english.
CALL FUNCTION 'CONVERSION_EXIT_LDATE_OUTPUT'
EXPORTING
INPUT = p_date
IMPORTING
OUTPUT = MONTH.
Regards

Similar Messages

  • How to avoid the Amount and Date values for VOID Cheques

    Hi All,
    I had created a two window i.e For Amount and Date. If I process the cheque the Amount value and Date should not trigger for VOID CHEQUES.
    Can any one tel me how to avoid the Amount and Date values for VOID Cheques
    Your help will be greatly appreciated.
    Regards
    Yathish

    Hi,
    I dont know which tablel you are referring to, is it PAYR table and the field VOIDR?
    If a cheque is voided, it would have a reason and it is stored in VOIDR field of this PAYR table.
    Check if the field VOIDR is filled, if it is filled, do not print the amount and date.
    Regards
    Subramanian

  • Rffous_c--amount and date is coming in a diffrent format

    Hi all,
    i am executing RFFOUS_C, which calls a sap script (customized) to print the data. It is for US. But when i see the output of the sap script, for one employee it is showing some diffrent amount and date format.
    the date for other employees is comming as 01/19/2007 whereas for one employee it is 01.19.2007. and also amount coming as 62.345,00 instead of 62,345.00. when i checked in the system the land1 field from REGUH is US and for this employee it is HK.

    Hi,
    Were you able to solve it.Because we also have similar requirement and i understand that the amount and date format depends on receipent country. But the customer doesn't want to change the country settings and want this format in issuing country format.
    Your help would be highly appreciable.
    Thanks

  • Amount and Date Formatting Urgent !!

    Hello Gurus,
    I want to format Amount in the below manner , I need to put this data in a text file ,
    When I read it from SAP , irrespective of whatever format
    I need to write the data in the text file in the following format
    999999999999.999
    if the amount is 12 then
    000000000012.000
    if the amount is 100 then
    000000000100.000
    Also , I need a help on date formating
    My date will always appear in the text file in the following format
    YYYY.MM.DD
    so irrespective of whatever user settings on has I need the format to appear in the text file as above.
    Please help me Points guaranteed , please try it at your end
    and please paste the code.
    rgds,
    Aryan

    Hi Aryan,
    For Amount, try out the below code...it will work fine.
    REPORT  ZAMT_DAT                                .
    TYPES amt   TYPE p DECIMALS 3.
    data : v_amt(16) type c ,
           v_amt1 type amt value 100,
           v_len type i,
           v_len1 type c,
           p_date(10) type c value '23012008'.
           v_amt = v_amt1.
           condense v_amt.
           v_len = strlen( v_amt ).
           v_len = 16 - v_len.
           do v_len times.
           concatenate '0' v_amt into v_amt.
           enddo.
           write : v_amt.
    For date, set the user settings as  below...
    system-userprofile->owndata->defaults->dateformat
    set it to the 4 th radio button....
    it will work fine.
    Thanks

  • Amount and Date Formating Urgent !!

    Hello Gurus,
    I want to format Amount in the below manner , I need to put this data in a text file ,
    When I read it from SAP , irrespective of whatever format
    I need to write the data in the text file in the following format
    999999999999.999
    if the amount is 12 then
    000000000012.000
    if the amount is 100 then
    000000000100.000
    Also , I need a help on date formating
    My date will always appear in the text file in the following format
    YYYY.MM.DD
    so irrespective of whatever user settings on has I need the format to appear in the text file as above.
    Please help me Points guaranteed , please try it at your end
    and please paste the code.
    rgds,
    Aryan

    Hi,
    Try out the following code for obtaining the date in YYYY.MM.DD format.
    data mydate like sy-datum.
    data: year(4) type c,
          month(2) type c,
          date(2) type c.
    year = mydate(4).
    month = mydate+4(2).
    date = mydate+6(2).
    write: / year no-gap, month no-gap, date.

  • Maintaining Text Elements in Original vs. Logon Language

    For report RFIDPL06, we are adding a new text element. The button "Maintain in Original Language" was clicked and the new text element was added to language "DE".
    Our question: How do we switch to "Maintain in Logon Language" so that we can add the new text element in language "EN"?
    The RFIDPL06 original language is "DE".
    Any help appreciated.
    We are using SE38 to maintain the text elements. The new text element is in English so we do not need a translation. We need to be able to maintain the text element in English. The logon language is English but the text elements are in German.
    How do we switch to maintain the text elements in English?
    Edited by: Doris Howard on Jan 5, 2009 5:16 PM

    Doris Howard wrote:
    > For report RFIDPL06, we are adding a new text element.
    1. How you are adding a new text element to a standard report. after getting access key?
    If you want to maintain translaction for text element in EN then you need to use transaction code SE63.
    a®

  • Difference between Invoice amount and invoice amount on psting date

    Hi Gurus,
    I had run MC$G report which dispalys Vendor/Order Qty/PO value/Gr quantity/GR value/Invoice quantity/Invoice amount (Posting date) / Invoice amount
    In this issue is Invoice amount Posting date and Invoice amount fields were not showing same value.
    Could you please tell me the difference between these 2 ??
    Reagr

    No answer

  • Is there any way to connect time capsule to a MacBook Pro directly via USB. I have a large amount of data that I want to back up and it is taking a very long time (35GB is taking 3 hrs, I have 2TB if files in total)...)?

    Perhaps via USB. I have a large amount of data that I want to back up and it is taking a very long time (35GB is taking 3 hrs, I have 2TB if files in total)...? I want to use TimeCapsule as back-up for an archive which is curently stored on a 2 TB WESC HD. 

    No, you cannot backup via direct usb connection..
    But gigabit ethernet is much faster anyway.. are you connected directly by ethernet?
    Is the drive you are backing up from plugged into the TC? That will slow it down something chronic.. plug that drive in by its fastest connection method.. WESC sorry I have no idea. If ethernet use that.. otherwise USB direct to the computer.. always think what way the files come and go.. but since you are copying from the computer everything has to go that way.. it makes things slower if they go over the same cable.. if you catch the drift.

  • I have huge amount of data on a windows external drive and want to transfer to a Mac drive.  Does anyone know an easy way to do this?  I have almost 2TB of data to transfer.  Thanks.

    I have huge amount of data 2TB on a windows Fantom external drive and want to transfer to a Mac drive.  Does anyone know an easy way to do this?  Thanks.  I have an IMac 3.5 GHz Intel Core i7.  I haven't bought a Mac external yet. 

    Move your data to a new Mac - Apple Support

  • Is the only way to import large amount of data and database objects into a primary database is to shutdown the standby, turn off archive log mode, do the import, then rebuild the standby?

    I have a primary database that need to import large amount of data and database objects. 1.) Do I shutdown the standby? 2.) Turn off archive log mode? 3.) Perform the import? 4.) Rebuild the standby? or is there a better way or best practice?

    Instead of rebuilding the (whole) standby, you take an incremental (from SCN) backup from the Primary and restore it on the Standby.  That way, if, for example
    a. Only two out of 12 tablespaces are affected by the import, the incremental backup would effectively be only the blocks changed in those two tablespaces (and some other changes in system and undo) {provided that there are no other changes in the other ten tablespaces}
    b. if the size of the import is only 15% of the database, the incremental backup to restore to the standby is small
    Hemant K Chitale

  • "Amount, currency, and date fields and service provider reset"

    Hi all,
    I am trying to save a trip request via TCode: TRIP but receive the following message:
    "Amount, currency, and date fields and service provider reset"   Messsage no. PTRA_WEB_INTERFACE150
    The system is on ECC6.0 with IS-PS (i.e. Funds management activated).
    Anyone encountered this previously - hope you can share your solution.
    Thanks in advance.

    Hi
    I am also facing the same and checked the table mention below and dates are same but still facing the error "Amount, currency, and date fields and service provider reset" along with other error message i.e "Expense type not allowed (T70S_RECEIPT)" .
    Please guide .
    V_T706B1
    V_T706B1_A
    V_T706B1_B
    V_T706B4
    V_T706B4_A

  • How do you handle and distribute huge amounts of data?

    I've got about 315 channels and will be collecting data at about 1300 Hz.  Data collection will last about 3-4 minutes.  I'm at a loss on how to distribute the data to researchers for evaluation.  These researchers will not have LabView or any other NI software to use.  I've tried the TDM stuff, and the add-in for excel 2007 but the files are just too large for excel to handle in a timely manner.  It took just over three hours to open one of my test files.  Anybody have any suggestions on how to manage and distribute files this large?

    Frank Rizzo wrote:
    Well I'm sitting in Cleveland Ohio right now so I am going to have to disregard your message.....hahhahaha...
    I'll be curious to see if Jamal Lewis's yardage improves for you guys this year after having some definite dropoffs with us the last couple.
    Though now that he's not playing against you,  your defense's numbers against the run should improve.
    I'd be surprised if you could get that data to the researchers at all using Excel.  It has a limit of 256 columns and 65536 rows.  If you had a column per channel and a row per data point, you'd be talking 315 columns and 312,000 rows for 4 minutes of data.  I guess you could always break it up into several files being sure to leave some rows and columns to give them a chance to do some data calculation.
    Out of curiosity, I created a spread sheet where every cell was filled with a 1.  It took a good 30 seconds to save and was over 100 MB.  That was probably about 1/10 of the amount of data your dealing with.  And going back to my earlier calculations, I would guess that as a text file, that much data would need about 10 bytes per value thus getting you to about 1 GB in text files.
    I would ask them what kind of software they will use to analyze these files and what format they would prefer it in.  There are really only 2 ways to get it to them, either ASCII text file which could be very large, but would be the most flexible to manipulate.  Or a binary file, which would be smaller, but there could be a conflict if they don't interpret the file the same way you write it out.
    I haven't used a TDM file add-in for Excel before.  So I don't know how powerful it is, or if there is a lot of overhead involved that would make it take 3 hours.  What if you create multiple TDM files?  Let's say you break it down by bunches of channels and only 20-30 seconds of data at a time.  Something that would keep the size of the data array within the row and column limits of Excel.  (I am guessing about 10 files).  Would each file go into Excel so much faster with that add-in that even if you need to do it 10 times, it would still be far quicker than one large file?  I am wondering if the add-on is spending a lot of time figuring out how to break down the large dataset on its own.
    The only other question.  Have you tried the TDMS files as opposed to the TDM files?  I know they are an upgrade and are supposed to work better with streaming data.  I wonder if they have any improvements for larger datasets.

  • Pull large amounts of data using odata, client API and so takes a long time in project server 2013

    We are trying to pull large amounts of data in project server 2013 using both client API and odata calls, but it seem to take a long time. How is this done
    In project server 2010 we did this creating SQL views in both the reporting database and for list creating a view in the content database. Our IT dept is saying we can't do this anymore. How does a view in Project database or content database create issues?
    As long as we don't add a field in the table. So how's one to do this with creating a view?

    Hello,
    If you are using Project Server 2013 on premise I would recommend using T-SQL against the dbo. schema in the Project Web Database for your reports, this will be far quicker that the APIs. You can create custom objects in the dbo. schema, see the link below:
    https://msdn.microsoft.com/en-us/library/office/ee767687.aspx#pj15_Architecture_DAL
    It is not supported to query the SharePoint content database directly with T-SQL or add any custom objects to the content database.
    Paul
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS |
    MVP | Downloads

  • JSP and large amounts of data

    Hello fellow Java fans
    First, let me point out that I'm a big Java and Linux fan, but somehow I ended up working with .NET and Microsoft.
    Right now my software development team is working on a web tool for a very important microchips manufacturer company. This tool handles big amounts of data; some of our online reports generates more that 100.000 rows which needs to be displayed on a web client such as Internet Explorer.
    We make use of Infragistics, which is a set of controls for .NET. Infragistics allows me to load data fetched from a database on a control they call UltraWebGrid.
    Our problem comes up when we load large amounts of data on the UltraWebGrid, sometimes we have to load 100.000+ rows; during this loading our IIS server memory gets killed and could take up to 5 minutes for the server to end processing and display the 100.000+ row report. We already proved the database server (SQL Server) is not the problem, our problem is the IIS web server.
    Our team is now considering migrating this web tool to Java and JSP. Can you all help me with some links, information, or past experiences you all have had with loading and displaying large amounts of data like the ones we handle on JSP? Help will be greatly appreciated.

    Who in the world actually looks at a 100,000 row report?
    Anyway if I were you and I had to do it because some clueless management person decided it was a good idea... I would write a program in something that once a day, week, year or whatever your time period produced the report (in maybe a PDF fashion but you could do it in HTML if you really must have it that way) and have it as a static file that you link to from your app.
    Then the user will have to just wait while it downloads but the webserver or web applications server will not be bogged down trying to produce that monstrosity.

  • ERROR MESSAGE WHEN DISPLAYING LARGE RETRIEVING AND DISPLAYING LARGE AMOUNT OF DATA

    Hello,
    Am querying my database(mysql) and displaying my data in a
    DataGrid (Note that am using Flex 2.0)
    It works fine when the amount of data populating the grid is
    not much. But when I have large amount of data I get the following
    error message and the grid is not populated.
    ERROR 1
    faultCode:Server.Acknowledge.Failed
    faultString:'Didn't receive an acknowledge message'
    faultDetail: 'Was expecting
    mx.messaging.messages.AcknowledgeMessage, but receive Null'
    ERROR 2
    faultCode:Client.Error.DeliveryInDoubt
    faultString:'Channel disconnected'
    faultDetail: 'Channel disconnected before and acknowledge was
    received'
    Note that my datagrid is populated when I run the query on my
    Server but does not works on my client pcs.
    Your help would br greatly appreciated here.
    Awaiting a reply.
    Regards

    Hello,
    Am using remote object services.
    USing component (ColdFusion as destination).

Maybe you are looking for