Amount of days in a month

Hi. How do I retrieve the amount of days in a month? Thanks.

here is a long way....
if the month is January return 31
if the month is Feburay return 28 or was this year a leap year.......
if the month is March return 31
........ and so one..
//but there is a better way just figure it out!!!!!David

Similar Messages

Amount of days in each month

Post Author: mike7510uk
CA Forum: Formula
i have a report where i have the days of the month along the top. I use this formula to get the day number
... int(day(DateAdd ("D",0,cdate({Command_1.startdate} )))) ...
where the 0 is incremented along the report up to 30. The startdate bit of the formula is a pre-defined date such as 01-04-2007 (1st april)
The fields then all work up to the point of 30th, i need it to end there and not go into the next month (1st)
Obviously this is fine if the month has 31 days as it will just display 1-31. I need some IF statements maybe that looks at which month is selected and displays the correct amount of days.
Any ideas?

Post Author: SKodidine
CA Forum: Formula
The easiest way to get the last day of the month (and hence the number of days in a month) is to use the custom function that comes with CR. I have only worked with CR XI so not sure about other versions.
1. Open the formula workshop.
2. From the Repository Custom Functions, under Crystal and then Date, RIGHT click on cdlastdayofmonth, click on ADD TO REPORT.
3. Create a new formula, in the formula workshop, under FUNCTIONS, go down the list till you see "CUSTOM FUNCTIONS", expand that till you see cdlastdayofmonth.
4. In your formula, type cdlastdayofmonth(currentdate)
5. Save and close and display the formula in your report, you should see 04/26/2007, depending on your date format.
You can customize the formula to suit your needs, and this way you do not have to worry about leap years..

How to calculate the number of days until your next birthday. Only using current month, day and birth month and day.

I'm trying to calculate the number of days until your next birthday. Only using current month, day and birth month and day. I can get close but i'm way off. When i enter in the next day, the amount of days is supposed to be 364. This is where I am having problems. I know my code is way off. I just need some guidance please!
Attachments:
D5.7_1.vi ‏8 KB

I just had a little fun with the Time Record...
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
D5.7_1_BD.png ‏19 KB

No of day in a month

I want to count the number of days for a month using sysdate and then multiply it with an amount. how do i do that . for eg
if my sysdate is 27th june then june being a 30 days month i need to multiply 30 with the ammount.
Ammount * 30.
if my sysdate is 27 feb then i need to count the no of days in the month that is 28 (if its a leap year then 29) and then multiply amount * 28.
How do i achive this in my formula .
Please help thanks

May be this?
select to_char(Last_day(sysdate),'DD') * amount FROM table

Month end accrual posting date- Last day of the month

Hi Experts,
I have set up month end accruals for PY US by configuring posting dates, LDCD, WageType accrual processing class, Schema changes. I have also set the closing dates as the end of the month.
Now after I do the posting , there are three documents getting generated.
1. Accrual posting document with first day of the current month
2. Normal Payroll posting document with payroll period posting date
3. Accrual reversal document with first day of the following month.
My Question is: As per standard SAP configuration, the month end accrual will have first day of the month. Can we customize this to end of the month for doc#1 - accrual document?
Please do let me know your suggestion and ideas.
Thanks,
Amosha

Hello,
I have a similar question and I hope to have more details on how to change the posting date.
The point is that I have an amount of 1200 and I have to post 100 for each month.
Key Date for Accruals: 31.01.2011
I posted 100 with Document date: 31.01.2011 and Posting date 31.01.2011
Key Date for Accruals: 28.01.2011
I posted 200 with Document date: 28.02.2011 and Posting date 28.02.2011
Also I reversed the amount posted in the previous month (100) with Document date: 31.01.2011 Posting date 28.02.2011
And so on...
The problem are the dates because I need to post the amount at the end of each month (28/02) and to reverse the previous amount at the beginning of the next month (01/02).
How can I change these dates?
Thanks a lot in advance
Kind Regards,
E.

Report for current day and current month

Hi gurus,
i 've a report, where i 've to display the values for qty and cost of the material for the current day and current month
HOw can i do this in BEx Query designer..If any document plz share
thanks
rakesh

hi Kolli
here i want to filter the data on system date,
i wnt the report to pick the date dynamically based on the system date.
but i think restricting on calmonth and calday is not going to solve my scenario..
rakesh

How can I set an event to repeat on a week day rather than a numerical day of each month?

How can I set an event to repeat on a week day rather than a numerical day of each month? I see an option at the bottom of the repeat window .... but I cannot use it. Actually, when I try it freezes up my Calendar.
Lorrene Baum Davis

These scrrenshots are from Snow Leopard - I would think that Lion wouldn't be too much different.

Defining last day of previous month in ABAP

All,
I am a BW guy and hardly know ABAP. I have a requirement where I have to calculate last day of previous month and use it in the routines of the transformations.
I have decided to define the Last day of previous month in Start routine and then use the global variable in Transformations to calculate further.
The logic that i have used is outlined below.
         Define G_DATE in global declaration for further use in Transformations.
In the Routine section,
        Assign G_DATE to SY-DATUM
        G_DATE + 6(2) = '01' (Replace last to field of date with '01' to establish first day of the current month)
        G_DATE = G_DATAE - 1 (To get to last day of previous month)
My dilemma is to implement this in ABAP in Start routine of transformations. Please include the exact ABAP code that would be needed in Declarations and Routine section.
Thanks in advance.

Hi..,
Go with the function module: LAST_DAY_OF_MONTHS
So, Just determine the last month from the sy-datum and then use above function module and pick the last date of the month.
Thanks,
Naveen Inuganti.

Successive dates with last day of that month being added to succesive date

Hi ,
I have a piece of code that displays the succuessive dates from the given date to tilll date with a date interval of 30 days. My requirement goes some thing like this. since the given date is '26-nov-08' the next successive date should be the number of days in nov(30) added to '26-nov-08'. that will be around 26-dec-08. For this date it has to add the number of days in December(31) to '26-dec-08' and that turns out to be '26-jan-09'. and this must go on till date.
In the below code i have used 30 for the interval of 30 days but the interval has to the last day of the successive date's month( for dec the interval has to 31 and for january the interval has to be 31 and for february 28)
select to_date('26-nov-08', 'dd-mon-yy') + (level - 1) * 30
from dual
connect by level <= trunc((sysdate-to_date('26-nov-08', 'dd-mon-yy'))/30 )Please advice

hi ,
the query sent by you is correct and could it be in corporated for this query :
SELECT TRUNC(inst_due_date) + (LEVEL-1 ) * (ilpa_term_type),iloan_code,LOAN_AMT,FEE_AMT,
LOAN_DATE,LOAN_STATUS_ID
FROM (
SELECT inst_due_date,sm.iloan_code,LOAN_AMT,
FEE_AMT,
LOAN_DATE,
LOAN_STATUS_ID,
decode(sm.ilp_term_type, 26 ,14,24,15,12,(select to_number(to_char(last_day(inst_due_date),'dd')) from dual)) as ilpa_term_type
FROM ST_IL_SCHEDULE sc,ST_IL_MASTER sm
WHERE sc.iloan_code = sm.iloan_code
AND sc.inst_num = (SELECT MAX(inst_num) FROM ST_IL_SCHEDULE b WHERE b.iloan_code = sc.iloan_code)
AND sc.iloan_code =123456789)
CONNECT BY LEVEL <= TRUNC((TRUNC(SYSDATE)-TRUNC(inst_due_date))/(ilpa_term_type) )
Here we are using the decode concept if ilp_term_type = 26 then 14 but we need to implement the code of adding the number of days to that month in place of this code :
select to_number(to_char(last_day(inst_due_date),'dd')) from dual:
Please advice

Display a metric differently only on last day of the month.

Have a Daily transaction fact where unit cost of product is stored at a day/part num /business unit level.
When we drag and drop date column and unit cost in the report like below we will have
Date      cost
Sep29     $10
sep30     $12
Oct1       $12
Oct2       $14
..........ans so on
The source sustem program runs on last day of the month around 8pm for setting up cost to reflect on 1st of every month
But the nighly OBI load ( Runs at 2am every day) when incrementally updating Sep30 data picks up $12 from the erp and populates in OBI.
But actually speaking, on Sep30 the cost was $10.
There is no way of running the ERP program to run afer OBI load. Hence we need an expression in the RPD (not answers) saying
when last day of the month (any month) the standard cost must be a previous day value.All other days the same value should be returned.
Is this possible without impacting report performance ?
So, when we drag and drop date and cost value the above report should change as
Date        Cost
sep29     $10
sep30     $10
Oct1       $12
Oct2       $14
Oct30     $12.5
Oct31     $12.5
Nov1      $13.5

You can achieve the above requirement for current month alone with below steps:
The solution requires to have a union report
First part of the report will have Date and Cost fields with a report level date filter, Date NOT IN (TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_MONTH , 1, TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE))))
Second part of the report will have Date and Cost fields with a report level date filter Date IN (TIMESTAMPADD( SQL_TSI_DAY , -(1), TIMESTAMPADD( SQL_TSI_MONTH , 1, TIMESTAMPADD( SQL_TSI_DAY , DAYOFMONTH( CURRENT_DATE) * -(1) + 1, CURRENT_DATE))))In the second part of the report,
Change the column formula for Date to display only Current_Date
Change the column formula for Cost field with FILTER(Cost USING Date = Current_Date-1)
Pls mark if correct/helpful.

Current day and no of days in current month

Hi all,
can anbody tell me which object is used for current day and no of days in current month.

Hi,
USe /OSP/GET_DAYS_IN_MONTH Function Module, just give Date you will get No. Of days in that Month.
Use SY-DATUM for current date.
Ex:
Data: dt type SY-DATUM.
dt = SY-DATUM.
so you get current date in dt.
Thanks
Reddy

How to create report which includes records of current month and last 7 days of previous month.

Hi Experts,
I need to create a report which includes records of current month and last 7 days of previous month.
I will get records of current month by this formula :- month({PROBSUMMARYM1.OPEN_TIME})=month(currentdate)
Please tell me how to add the records of last 7 days of previous Month for the same report.
Thanks in Advance.

Hi Ajay,
If you have more than a year data in your database then your formula will return wrong results. ie. If your data consist of 2012,2013,2014 data then below formula will return all 8th month data irrespective of year. So, you need to check year also here
month({PROBSUMMARYM1.OPEN_TIME})=month(currentdate) and
Year({PROBSUMMARYM1.OPEN_TIME})=Year(currentdate)
Now add Abhilash second statement in OR so, your formula should look like :
(month({PROBSUMMARYM1.OPEN_TIME})=month(currentdate) and
Year({PROBSUMMARYM1.OPEN_TIME})=Year(currentdate))
OR
Date({PROBSUMMARYM1.OPEN_TIME}) IN [DateAdd('d',-7,Maximum(LastFullMonth)), Maximum(LastFullMonth)
-Sastry

Amount of Days

Hello,
i have two characteristics (start-date & end-date) defined as date and i have to calculate a new characteristic, called "amount of days" by a routine. exists a function module which i can call within a routine to get the amount of days?
Start-Date      End-Date     Amount of Days
01.01.2005     31.12.2005 365
12.03.2002     26.04.2005 116

Hi
What is your issue..subtraction of date works fine in BW
Days = DAT1 - DAT2
Thanks
Tripple k

How to get the last day of a month?

HI,
I want to know how to get the last day of a month.
In my JClient form, I tried to get it by using oracle.sql.Date method, that is:
lastday=oracle.sql.Date anydate.lastDayOfMonth();
But it does not work. The result is lastday=anydate.
Why?
Stephen

You can use the Calender class...
Calendar c = Calendar.getInstance();
and then something like...
c.add(c.MONTH, 1);
int dayOfMonth = c.get(Calender.MONTH);
c.add(c.DAY_OF_MONTH, - (dayOfMonth-1) );
other usefull functions are:
System.out.println(" YEAR : " + c.get(Calendar.YEAR));
System.out.println(" MONTH : " + c.get(Calendar.MONTH));
System.out.println(" DAY_OF_MONTH : " + c.get(Calendar.DAY_OF_MONTH));
System.out.println(" DAY_OF_WEEK : " + c.get(Calendar.DAY_OF_WEEK));
System.out.println(" DAY_OF_YEAR : " + c.get(Calendar.DAY_OF_YEAR));
System.out.println(" WEEK_OF_YEAR : " + c.get(Calendar.WEEK_OF_YEAR));
System.out.println(" WEEK_OF_MONTH : " + c.get(Calendar.WEEK_OF_MONTH));
System.out.println(" DAY_OF_WEEK_IN_MONTH : " + c.get(Calendar.DAY_OF_WEEK_IN_MONTH));
System.out.println(" HOUR : " + c.get(Calendar.HOUR));
System.out.println(" AM_PM : " + c.get(Calendar.AM_PM));
System.out.println(" HOUR_OF_DAY (24-hour): " + c.get(Calendar.HOUR_OF_DAY));
System.out.println(" MINUTE : " + c.get(Calendar.MINUTE));
System.out.println(" SECOND : " + c.get(Calendar.SECOND));
System.out.println();*/

Multi day events in Month View.

Multi day events in month view only display on the first day. Checking all day event fixes this, but none of my multi day events are in fact all day. If I sync with my iphone, it does mark both days on the multi day event in month view.
In week view they display correctly, but I like to have the month drawn out.
I am surprised to come across this hang up. Other calendars I have used always displayed such events across the month view.
Is this a bug or lack of feature?
R

Bug or design flaw?
Try setting it as a recurring event (yeah, I know, it's not a great solution, but it gets the job done)

Amount of days in a month

Similar Messages

Maybe you are looking for