During an application build I received an error 7 for a missing source NI vi 1d linear evaluation.vi

During an application build, I got "Error 7 occurred at c:\Program Files\National Instruments\LabVIEW 6\vi.lib\Analysis\8numerc.llb\1D Linear Evaluation.vi - source does not exist".
This existed in Labview 5.1.1. Was it deleted in 6.0?

No, this VI is in the following location "Functions >> Analyze >> Mathematics >> Array Operations>>1D Linear Evaluation.vi"
Perhapse this in a package (Advanced Analysis) that is not included in your version of LabVIEW. You may need to upgrade to get these VIs, or you can copy them over from your Labview 5.1.1 installation.
-Jim

Similar Messages

During Adobe Flash 11 install, I received the error "cannot contact reliable source." Help?!

While streaming videos on YouTube and Hulu, I noticed a signifant amount of lag and buffering. In the past I've resolved this issues by updating my Flash player (even though I typically am on the newest version). Today I tried to install a Adobe Flash 11 and I received the error, "Cannot contact reliable source" amongst a few other errors (I cannot recall what they said). I went to the troubleshooting section, uninstalled my current Adobe Flash, and tried to download version 11. I keep getting the aforementioned errror. Now rather than a lag time and buffer issue, I cannot watch any videos at all since my Flash player was uninstalled and I cannot download the new version. I'm currently on a relatively new iMac with OS X version 10.8.4. I don't think there is problem with my actual computer. Can anyone help?
PS: I have an unhealthy affinity for catching up on terrible TV shows on Sundays so I'm saddened by my inability to watch Hulu Plus.

Try this installer: http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg

HT1349 after Itunes update I receive an error MSVCR80.DLL missing please reinstall Itunes, I did a few times but it is not working

after I-Tunes update I receive an error MSVCR80.DLL missing please reinstall I-Tunes, I did a few times but it is not working

Okay! Thanks for the tip, David. I did what you did too, and that fixed my Apple Software Update thing. I downloaded the latest update using that program and installed using the program, and everything was fixed!
I think it was when I had a problem installing using Apple Updater that began the problems, and installing manually just added fuel to the fire. But now everything's fine! Thanks, man!

I have a application build in labview 8.5 for Windows XP using NI Visa functions to interact with hardware , how to make is work in Windows 7 32 bit and Win 7 64 bit

I have a application build in Labview 8.5 which wroks fine with Windows XP , this program uses basic read /write functions of NI Visa to communicate with Hardware . This application doesnt work with Windows 7 32 bit/64 and Vista . What changes i need to do to make it work for the said operating system

srinivas wrote:
Sorry for confusion ,
My question is what changes i need to do in code or while making the installer to make the existing program work with other Windows operating system
You need to make sure the machine have the corresponding NI-VISA installed. Check in the NI software pages for the right version.
Also make sure that the com port's can be selected when you first start the application. Eg. if you refer to VISA "COM1" on the XP machine It might be "COM2" on the Win7 machine.
Br,
/Roger

"Application can't be found" error for files and folders

This has become mind boggling for me.
Starting last week, files I've created (namely in either Adobe Photoshop CS5 or Illustrator CS5) have started giving me "Application can't be found" errors when trying to open them. They show up when I use spotlight to search for the file, but they don't show up in Finder and can't be found when trying to browse for them via the apps used to create them.
Now I can't open a particular folder either (same symptoms and errors as above), which should have nothing to do with any applications.
Have rebooted numerous times and am up to date on all firmware. I know these files exist and did work at one point because I uploaded them to be printed last week with no issues. But sometime between now and then (and I haven't touched them since) they decided to stop working. Please help!

I am annoyed by, I think, the same problem. I would like to drag Pages files directly to the finder in the dock, but now with Mavericks I can not do this. It is bothersome to have to click on the finder to open it up when I did not have to do that with the old operating system. I hope someone can help us both out.
I also hope that in the next update Apple addresses the concerns many are having with the newest version of Pages. Until something is changed, I am sticking with old Pages because I find it to be a much better program to use.

I received an error for a webpage i entered, how can i fix it so i can log in again

hi, i received a error message in my computer, because i did something wrong, and i want to log in to the web page again but i cant. how can i fix it

She's checked her spam folder as well as the Inbox on her email account ? If it's not there either then you could try resending it to her (and double-check the email address that you are sending it to) : http://support.apple.com/kb/HT1541

During Itunes install I keep receiving windows error 2 message

I am trying to install itunes on my new HP Pavilion laptop and I keep getting an error message. Windows error 2 message

With the Error 2, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR suitable for your PC (there's a 32-bit Windows version and a 64-bit Windows version):
http://www.rarlab.com/download.htm
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you? If so, see if iTunes will launch without the error now.
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

I am running an Applescript to determine if an application exists and receiving an error related to sandboxing - why

I am attempting to write a script to do some file conversion when I import files into Aperture using Aperutre's importAcrtionFromVersions event. Right now I am simply trying to have the script make sure the conversion application exists and I am finding in the Console that I am getting an error saying that a "sandboxed application with pid 27399 attempted to lookup app: Finder but was denied due to sandboxing". (FYI pid 27399 is Aperture)
When I run this script on it's own I have no problems. The code being used is
set theApp to item "Adobe DNG Converter" of folder "Applications" of startup disk
I have also tried
if exists file "Adobe DNG Converter" of folder "Applications" of startup disk then
which also works on its own but doesn't when running from Aperture again because of sandboxing.
I am not sure if this should be in the Aperture discussion community or somewhere else. I thought because the problem is the result of sandboxing, which is an OS issue that it is more appropriate to be in the OSX community.
I am running an iMac with OSX 10.8.2 and Aperture version 3.4.3. Any ideas or resources would be appreciated.

It looks like your script is targeting the Finder - if Aperture is what is running the script, it will need the proper entitlements to control stuff outside its sandbox. You might try using the bundle identifier, which is usually the way to go since it can be trapped by a try statement, for example
try -- test for an application
application id "com.apple.Safari"
on error errmess -- doesn't exist
log errmess
# whatever
end try

[svn:fx-3.x] 6344: Fix a problem where Application was not receiving an error event when HTTPService failed .

Revision: 6344
Author: [email protected]
Date: 2009-04-28 11:46:31 -0700 (Tue, 28 Apr 2009)
Log Message:

It looks like your script is targeting the Finder - if Aperture is what is running the script, it will need the proper entitlements to control stuff outside its sandbox. You might try using the bundle identifier, which is usually the way to go since it can be trapped by a try statement, for example
try -- test for an application
application id "com.apple.Safari"
on error errmess -- doesn't exist
log errmess
# whatever
end try

JDBC Receiver adapter Error for insert into DB2 table

Hi all,
I want to insert data into a DB2 table on AS400 via a Receiver JDBC adapter.
The communication channel seems to be ok but when I try to send the message, I obtain the following message on the adapter monitoring :
Error: TransformException error in xml processor class, rollback:
Error processing request in sax parser: Error when executing statement for table/stored proc. 'GIK.GDT01' (structure 'Statement'): java.sql.SQLException: La table GDT01 de la bibliothèque GIK est incorrecte pour cette opération.
Could someone help me?
In the communication channel I have seen we can choose "native SQL String" as message protocol.
Do you think it could be a workaround for me? if yes, could someone send me an example about it?
thanks a lot,
Philippe

Hi,
Try to remove GIK.GDT01 in table tag of your XML structure and put GDT01 alone and see.
The solution to your problem is found on this particular link.
http://www.websina.com/bugzero/faq/exception-as400.html
Tell me if it works
Best regards,
Felix

I get the following error message whenever I try to access email from Dice JobAlert. I don't receive the error for any other email I receive and I also don't get the error message when I access the email using Internet Explorer.

This is the error message I received: A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Script: http://sz0150.wc.mail.comcast.net/zimbra/js/Startup1_2_all.js.zgz?v=110527090709:822

Their browser detection script is out of date. The warning seems to come from this file: http://virus.info/api/load/file/js , specifically, the badBrowser() function.
It's checking for "Firefox/1", which it finds as part of "Firefox/10".
Perhaps point them towards this blog post: http://hacks.mozilla.org/2012/01/firefox-goes-2-digit-time-to-check-your-ua-sniffing-scripts/

Unable to synch iPhone-receiving a error message about missing session ID

I can not synch my iPhone 5s…am receiving error message that session id in missing or invalid

syncing it with what?

Flash builder 4.7 throwing errors for no reason - is there a fix?

Hello,
I am using FB4.7, right now on an AS project. For some reason, FB has started "locking up" on runtime errors. Meaning, if I run a code with an error, then fix the error, FB still reports an issue at that line, even if the line is blank.
In the attached image, you can see that I am getting a 1009 Error on the second reference to a variable that has been declared directly above - obviously a bs error. I had a chunk of code there before, that did have the error, but I am still getting the Error, can't test, compile, etc.
Very frustrating, no idea what is causing this!!! Thanks for any input!
FB 4.7 Win7

Looks like its dying on the first line of code in that method. Try checking:
The methods parameters - perhaps compiler doesn't like TextFormat defaulting to null
   Or perhaps you're using that default null param and its biting you but misreporting the line number.
   Seems like I might have had problems in the past with params, but I think it was with assigning null to a callback function param.
      Instead I had it default to an empty class method called NullMethod, or some such.
Other ideas, although these usually apply to compile time errors and not runtime:
Import statements - are you missing one?
Access modifiers - is something trying to call this method that doesn't have access?
Check for syntax errors higher in the file.

Logic X Application Specific Information: abort() called *** error for object 0x608001600c20: Heap corruption detected, free list canary is damaged

Can anyone please tell me what this error message means? And....how to fix this problem. Thanks.

I'd remove the Tascam driver and retry. If this doesn't help, remove the IPtouch and retry,
If it crashes, let the crash reporter send the log to Apple.
If not, report back here. ;-)
Instead of the IPtouch you might try Apple's own Logic remote app. Has a lot functionality beyond the usual remoting, like documentation, that follow your work, like QuickHelp.
Best,
DaCaptain

TS1368 "Cannot connect to the ITunes store" Trying to purchase through an app (Game Of War) and have received this error for the past three days. I can still purchase music through ITunes and I have read Apple's article on troubleshooting and none of th

Tried everything on Apples list for this issue with no luck. Any suggestions?

Ok I got it fixt.
Go to: https://appleid.apple.com/cgi-bin/WebObjects/MyAppleId.woa/72/wa/directCallLandi ngIndex?wosid=tRtVd4bx348XlzN7Je9tb0&localang=en_US
Manage account, and resend your verification email..
Hope it helps.

During an application build I received an error 7 for a missing source NI vi 1d linear evaluation.vi

Similar Messages

Maybe you are looking for