Amount posted and Line item is Different in AW01n

Hi Asset accounting Experts
I have an issue Please need your Suggestion.
When one of our User is Using AW01N in that he found there is difference in Amount
When we see line item at bottom (Transactions) in AW01N
here it is showing one amount, when we double click on the amount, we can see accounting entry with different amount.
Pls see the below screenshot.
in the screen shot i have highlightned amount in Red ex here in our case it is 178952158.
when i double click this an accounting entry will display, in that amount posted would 175000000.
Please suggest

Hi Miktar,
Thanks for ur quick reply.
i should not share that screen shot.
but the accounting entry is as below
Document currency : usd
40 5007000 (BS GL account) xxxxxxxx
75 1210000( Recon account ac) xxxxxxxxx
Here Local Currency is LKR
But in asset master 72000005 under allocation, Evolution Grp INR(Currenecy) maintained.
transaction Type 120
Regards,
Babu

Similar Messages

Posting line item currency different than header curency

Hi ALL,
Is there any way in SAP where I can post line items in a different currency that header currency?
for e.g. Doc header currency - USD
Line item 1 Dr A/c - Amount in USD
Line item 2 Cr A/C - Amount in CAD
Can you please let me know if it is possible to post in SAP?
Thanks,
Ram

Absolutely not possible.
Currency is at header level and not at line item level.
Regards,
SDNer

PR and PO Line items are different.

Hi,
Hi,
We created PR , realeased then created PO.
In PR we have 5 Line items after created PO the line item serial are not like same as PR.
It shows all 5 line items with different line number , Could you pl suggest what are the reasons to cause this and getting changed automatically.
How to change it same like as PR line items number,
Appriciated and your help.
Reagrda
Shiva.

If I understand your question right, then you need to maintain the same Line Intervals for both the PR and PO Document Types in your configuration.
Go To SPRO --> Material Management --> Purchasing --> Purchase Requisition --> Define Document Types
In the field ItmInt. or Item Interval for your document type, remember this value.
For PO, the SPRO link is:
Go To SPRO --> Material Management --> Purchasing --> Purchase Order --> Define Document Types
In the field ItmInt. or Item Interval for your document type, set the value to be same as in your PR document Type.
Hope this helps
G. Coelho

Exit or Enchancement for changing amount in vendor line item in MIRO

Dear All,
I want to change the amount in vendor line item which get posted through MIRO.System generated 2 line item in case of payment terms of retention is used.
Requirement is that, in one line item of vendor, amount should get changed based on the logic and adjust the amount in other line item of vendor.
Request to please let me know, Where in Exit/ Badi or enhancement spot, we can write our coding, so that it should update the amount with new value at the time of posting the document.
Thanks & Regards,
Abhinav Jain

Hi,
Try with Badi ACC_DOCUMENT
Regards,
Azeem

Line Item having different currency

Hi,
Two line items in order are having two different currency. In the client legacy there are having this provision, and the same they want in SAP.Can this be processed? If so how. Sold to and Ship to Party are same and the one place only.
kindly advise.
TNV

Hello Friend,
You can do the needful in SAP also...
A Sales Order can have different line items with different currencies...
While posting the Invoice system will convert the foreign curreny currency into the currency of Conpamy code, based on the exchange rates.
Hope this helps. .
Thanks,
Jignesh Mehta

Cash Journal : Error "Inconsistent amounts" during a line items reversal

Dear Experts,
i have posted a line item in Cash Journal.
now when i m trying to delete/reverse it, i m observing a error "Inconsistent amounts" that leads to a ABAP dumb "FMGL_CHECK_PERIODS_REV_REAL" i have dowloaded & applied a note from SAP 1247225, but could not fix the error.
please advice & help me out.

Hi Hussein
In addition to the application of the note using SNOTE
you would also need to perform the following manual steps (configuration)
Call transaction SM30 and change the following entries in the table TRWPR:
PROCESS EVENT    SUBNO COMPONENT KZ_BLG FUNCTION
DOCUMENT PREREV 190   EAFM             FMGL_CHECK_PERIODS_REV_REAL
becomes
DOCUMENT PREREV 190   EAFM             FMFA_CHECK_PERIODS_REV_REAL_CK
DOCUMENT REVERSE 065 EAFM             FMGL_CHECK_PERIODS_REV_REAL
becomes
DOCUMENT REVERSE 065 EAFM             FMFA_CHECK_PERIODS_REV_REAL
Regards
Sach!n

Transfer Posting for Line Items between Reconciliation Account

HI,
My customer want to transfer costing the line items between a old Reconciliation Account and a New Reconciliaton Account.
For example, i have a Account Group Vendor with a old Reconciliation Account " Vendor CEE".
This reconciliation account has the line items concern differents Vendors.
Edit a new Account Group calling ( CEE) to replace a Old Account Group.
After changing in Vendor Master data the Reconciliation account, we need to transfer posting the line items in the new account reconciliation
In Sap system is there a report can do it? Can you help me?
Regards

Hi,
Thank you for the answer.
I did that, and exactly:
- In Trx Obbw insert the reconciliation account and Adjustement account.
- and execute the trx FAGLF101 in test but the sap system give me the following error:
" Account determination for transaction A00 is missing for account 0205016001 ZM P001 "
Message no. FR005
Can you help me?
Regards
Edited by: Marika De Cesare on Oct 18, 2011 1:06 PM

Gr Ir Assignment Updation with PO and Line Item

In the GL for GR IR Account the sort key was not maintained with PO number due to which the assigment field in the line item was getting updated with the posting date and not with the PO & LIne Item details.
We have made the requiste changes and new items are getting updated properly.
But require assitance in updating the earlier line items.
As of date total line items are more than 0.15 mn.
Please suggest some method to automatically update the assigment field of the GR IR Line items with the PO Details.
Regards
Mukesh

Hi,
You can use a substitution to update the field through FI. Use GGB4 for wirting a substitution you may need some ABAP coding to substitute PO no and line items in the assignment field. rule would be Co code =XXX and GL account =xxx and Posting date earlier than =xxxx then concatenrate EBELN and EBELP in Assigment field Zounr.
Then execute FBL3N and edit the assignment field by selecting all the documents and then save it you should see the PO line items populated. You can leave the substitution on or you can remove it after updating,
Regards
K.R

How to change the amount of Vendor Line Item in FB60

Hi all,
I want to post the invoice in SAP with FB60. The journal is as follow:
Dr. Expense    1000 USD
Dr. VAT-Input    100 USD
      Cr. Account Payable     1100 USD
But the problem, the amount of Account payable is 1000 USD. Because I want to fill the amount in vendor line item (FB60) with the original expense (1000 USD).
I want to ask, there is any configuration in SAP to change the amount in vendor line item which it could be the same with amount of the original expense.
If you ever have same problems, plase share with me
Thanks,
John

Hi,
Thanks for your reply. The result of posting invoice that I want is as follow:
Dr. Expense    1000 USD
Dr. Vat - Input    100 USD
Cr. Account Payable   1100 USD
When posting invoices in FB60, there is a filed "amount vendor line item" at the top. Usually the field is filled with amount vendor 1100 USD, but I want to fill it with the expense amount (1000 USD). Which can be show the account payable 1100 USD.
Is there any configuration to change the field "amount vendor line item" ?
Thanks,

Inconsistencies between Balance and Line items

Hello masters!
I found some inconsistencies betwen balance and line items. I tried to solve the problem using FAGLF03 and RFINDEX (when executing SAP retrieved: "New GL is active. GLT0 can not be adjusted") but both did not work.
We have never gone trough an archiving process.
Thanx
Edited by: Naej on Jun 15, 2010 11:00 PM
Edited by: Naej on Jun 15, 2010 11:01 PM

Hi,
This will happen only if you activate line item management after started posting that GL account
Please execute program RFSEPA01 to set right this.
Best Regards,
Madhu

Header and Line Item reporting (MultiProvider)

Hello All,
We have data coming in from a LO Extractor. There are 2 extractors. 1 for line item the other for Header. The line item extractor has all the fields for both so we decided to use this extractor (the line item).
Question is, when extracting this data multiple records come over. Let's say the order has 2 line items. It brings over a header record and then 2 line item records. We have it going to an ODS and then Cube. The ODS key is order number and item. Well the header record comes over with item number #, so 3 records hit the ODS.
How do you handle this? We saw something about denormalization and make this header record item number a 0.
Can someone explain to us how to handle this? We also read about a Constant selection and loading the header record and line item as we are to both the InfoCube, but we just don't understand this solution.
Please help, Thank you

Item level will have all fields those are in Header level.Header level data will be a subset of Item level data.Load only Item level and when you require header data remove Item number in that relevant DSO and you can see all the data summarized to header level in overwrite mode.
This will not be good option if you require some fields that may have different records in the header and the item.
One better option is create a secondary staging DSO that updated by header, item and schedule line level and you can choose your own data fields and key fields. You can update them in overwrite mode to have summarized records that avoids duplication of records from header and item for same document.
Constant selection wil be helpful in the report level not during load process.
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/e7/5f983c1a356858e10000000a114084/frameset.htm
This will ensure total displayed is constant even after navigation. So it hides repetitive records displaying after drilldown.

Can we clear more line items with different currency within one Vendor

Dear All,
Please guide us the following issue is
Can we clear two line items with different currency within one Vendor (i.e., Down Payment entry passed in EUR and Invoice in JPY).
Thanks in advance.
Regards
Srinivas

Hi
I suppose this should be possible in F-44, for any difference in forex enter a new line item 'Charge off diff.' to Dr/Cr Forex gain/loss account
Thank You,

How to reset already posted GL line item attributes

Hi Experts,
I have an issue with GL line items for Bank clearing account. At the time of conversion posted the line items in bank clearing account which are not open items and also not cleared items. Now I want to make it as open items in order to clear from this account.
Please share your experiences and thoughts.
Thanks in advance.
Regards
Aditya

Dear:
What i understood from your query is. You had a Bank Clearing account which formerly was not maintained on Open item basis. However you converted it to OIM management latter on. Now you have old entries standing in this account that belongs to period before OIM was turned on .. Am i right? If this is so then answer is you can only clear those entries on Open item basis in F-03 or in any other t code for open item processing which were posted on or after OIM was turned on. This is for your information.
Regards

Amount in Bar Code is incorrect;Amount in the line item can be used instead

We have a problem in our Brazil company code.
When we have a document with value higher than 5,000.00 BRL it is subject to Pis/cofins tax. In the Boleto (paper) document the amount is after tax deducted. But we see the full amount in the Vendor line item in SAP
When the system reads the bar code and saves this code in the vendor line item during the document change we get a warning message no."8B797: Amount in Bar Code is incorrect;Amount in the line item can be used instead".
And the amount in the Barcode line automatically adjusts itself to the line item amount which is the pre-tax amount (full amount).
Example: Amount in the SAP Invoice doc is R$ 6,268.72
Amount in Boleto (paper) R$ 5,977.22 (after deducting PIS/COFINS) - This amount appears in the bar code but once we press enter after the warning message it automatically adjusts to R$ 6,268.72 .
We tried few notes like 784748 to apply but it says it is obsolete. We are on ECC 6.0 Release level 11.
Regards.,
Raj/

answered through SAP note 784748

MIGO-sales order number and line item not validated for 501E mvt in MIGO.

Hi All,
In MIGO i am trying to post for 501E(specisl stock=order on hand) movement type, here i am entering the material and in the where TAb even if I enter wrong sales order number or wrong sales order line item number. the system allows to post .
its not validating the material against the sales order number and line item number that is entered to check whether that material really exists in that particular sales order or not.
is there a way to fix this?
Thanks
Mahendra

hi
i dont think vvalidation is possibel
as the system dont know whaich material is assigned to which SO
as we r takeing the stock without PO
if u want to validate then system can validate the quantity that is also with use of some user exit
correct me if i am wrong

Amount posted and Line item is Different in AW01n

Similar Messages

Maybe you are looking for