Amout check on Down payment Invoice

Dear All,
while creating a down payment invoice, the system have not any check on the amount of the base document. as if we have a purchase order of amount 100$ and we create a down payment invoice initially of 30% and pay it through out going payments, and again we create a down payment invoice and assign 100% the system allow us to create it against the same vender without show the remaining balance or any amount exceeding notification.
so in actual the amount would be 130$ and when we try to create the A/P Invoice with reference to that PO. system will not allow us to create invoice as the total will be higher then the actual PO.
Kindly guide me in this regard. how can we control the down payments amount with reference to due amount.
Regards,
Awais

Hi,
it is a system default which will allow you to create as many down payment invoice as possible.
it is just based on the BP code.You can create a standalone down payment invoice for any BP,item or service type and then you can link this to your Invoice.
During the invoice you will be selecting your down payments in the invoice window.Here you will be seeing only the down payments which you have made already the payments.
And if you try to select the down payments whose total is greater than invoice system will block you.
If you want to link down payment based on PO then i think through coding it is possible
Regards
Md.nazeer Shaikh

Similar Messages

Can not void a check win paid from a down payment invoice

I am working on a problem where we can not void a check to adjust the posting date of the payment.
It would seem that the issue lies with the AP down payment invoice since the error message is
"Cannot cancel a document with down payment that was drawn to invoice {3703-6]"
any ideas would be greatly appreciated
Thanks,
John-Michael

Dear,
Please first check whether the payment did select some down payment or not.
If it did, for your issue, I am sorry to say that we don't have workaround from the point of view of system. We would like to recommande customer to consult with his accountant in order to by-pass the mistake he had done
using standard application processes.
After double confirmed with development,this issue is currenct system behavior.The reply is:
1) payment for the down payment invoice cannot be cancelled if it was
withrawn to AR invoice. It can be done after the AR invoice will be
credited.
However, we have another problems:
2) the invoice cannot be credited if it closed/reconciled.
And one more:
3) cancelling of the manual reconciliation does not open the invoice.
So according all these information the system behaviour is correct and we can do nothing here.
Thanks
Regards
Apple

Creation of A/R Down Payment Invoice based on Sales Order not logical

When creating a A/R Down Payment Invoice based on a Sales Order you
have the option to create multible ones. Which by itself could be
usefull to create one of 50 % for a certain day and decide they need to
pay another 25 % at a later date.
But SBO does not track what already have been posted. Therefore you can
create a sum more then a 100% without warning or blockage.
Tested this in SBO 2007 A SP:00 PL:00
Scenario:
Sales - AR>Sales Order
Create and post a Sales Order
Sales - AR>A/R Down Payment Invoice
Create an A/R Down Payment
Select the BP and copy the Sales Order
Set DPM to 40%
Post the A/R Down Payment
Sales - AR>A/R Down Payment Invoice
Create an A/R Down Payment
Select the BP and copy the Sales Order
Set DPM to 100%
Post the A/R Down Payment
Sales - AR>A/R Down Payment Invoice
Create an A/R Down Payment
Select the BP and copy the Sales Order
Set DPM to 70%
Post the A/R Down Payment
Making the total for the Sales Order 210% worth of Down Payment
Invoices without warning/blocking. I would expected that you would only
be able to set the rest sum %. For instance first scenario I entered
60% therefore setting the second Down Payment Invoice to a max of 40%
Untill you have used up the 100% and you cannot select the Sales Order
in question..
If multible users do the same work, SBO doesn't show that it has
already been done. Same if you forgot you already created it you can
still create one. Plus sometimes it will happenyou create the Down
Payment Invoice and not paying attention you create the first one with
a 100% and later with the intended percentage..

Hello Petronella,
you are right that B1 is not checking the total value of DP created from the Sales Order.
The logic and checking procedure here is only between Sales Order -> Delivery/Invoice.
DP Invoice is considered as transaction related to document the receipt of the money (parallel to the sales process). Between the moment of basing of DP to Sales Order it is still possibility to adjust Sales Order as there is no posting behind Sales Order.
The question is what would be a checking procedure in case that on Sales Order there is based Delivery and DP? What would be the system priority to take into a consideration?
Regards,
Martin Slavik
Regional Solution Manager

How to block a delivery when an A/R Down Payment Invoice is not paid?

1. Create and add a Sales Order
2. Create and add an A/R Down Payment Invoice based on the created Sales Order (set DPM % to 50)
3. Create and add a Delivery based on the created Sales Order
The delivery is not blocked.
Is there an easy workaround/alternative to ensure goods are stopped from being delivered when a customer hasn't paid a certain amount upfront?

Hi Suda,
Unfortunately my usage of the sql queries is a bit rusty and am not sure if I am doing this correctly.
Next to that I don't exactly see how it should work (hence my comment being rusty - haven't used this very often). I see that it checks the AR Down Payment Invoice document and lines, but how it checks to which sales order it is connected to stop the delivery.. Plus I always want it to stop any delivery when an AR Down Payment for any percentage hasn't paid in full untill it has been paid/approved by someone to be delivered. If no AR Down Payment has been done, there is no issue.
Anyway I have copied your query to the Query Generator and saved it.
I created an approval procedure based on delivery documents and based it on the saved query.
Added a sales order and created a Down Payment Invoice based on the sales order with 40% that has to be paid upfront. Created a delivery based on the sales order and added the document. I only gotten an internal error (it went so quickly I can't see the actual whole message because I get the created message straight after), but it created the delivery anyway.. (same as you described maybe?)
I'm missing something obviously, let me know what to do.
Regards,
Petronella

Purchase register query based on down payment invoice

Hai All,
I am creating an invoice based on purchase order.The vat tax is being calculated in the downpayment. I want the vat to be displayed in the downpayment invoice as well as the a/p invoice but i m not getting it in the a/p invoice. Pls guide me with the linking of tables to get the query working. I have formatted the fields req but could not link the tables...Pls guide me with that...
Thanks & Regards,
Neela

Hi Neela,
Check the thread.
Re: Purchase register query based on down payment invoice
FROM PCH1 T0
INNER JOIN OPCH T1 ON T0.DocEntry = T1.DocEntry
INNER JOIN OSLP T2 ON T0.SlpCode = T2.SlpCode
LEFT OUTER JOIN PCH12 T3 ON T1.DocEntry = T3.DocEntry
LEFT JOIN ODPI T4 ON T1.CardCode = T4.CardCode
INNER JOIN DPO1 T5 ON T0.ItemCode = T5.ItemCode
Close the thread, if issue solved.
Regards,
Madhan.

A/p Down Payment Request and A/p Down payment Invoice

hi All,
I am Using SAP B1 2005B
A/p Down Payment Request :-
1.Wnen i want to give a 50% Advance Based on Purchase Order What is the Procedure. whether i have to use A/p Down payemnt request or A/p down payemnt invoice.
2.whenever i am making down payment request there is no JE and There is No GL and BP affected.
2.a. While making payment against down payment request there are 3 accounts hitted
1.Bank Account.
2. Bp(As Advance-Debit balance)
3.GL linked with BP.(Acccounts payable).
Is Correct or Not?
3. While Making A/p Invoice can we pick this Advace in A/p invoice Entry and can we Adjust .
at this stage Whenever i want to Check the balance of the BP should be Debit Balance(as Advance).
A/p Down payment Invoice:-
What is the Procedure, When it will be Used and What are the GL affected.
Thanks & Regards,
yusuff

Hi,
We are using A/p Down Payment Invoice where the entry is
Party Credited
Advance for capital purhase ie. ofset account is debited
and making payment
Party Debited
Bank Credited
and when linking with Invoice
Advance for capital purhase ie. ofset account is credited
GRNI of Asset A/c is debited.
Here the main issue is in Party ledger its showing 1st credit and then debit and your requirement that Party should be shown debit balance it will be not there it will be in Offset account i.e "Advance for capital purhase ie. offset account"
Now you have to generate query base report if you want to show advances given to party.
This is what we are doing if there is any other possibility kindly revert back all experts.
Thanks
Kamlesh

Wrong input Witholding tax at AP Down Payment Invoice

Dear all,
My client has a problem.
He already input AP Down Payment invoice and already has payment for it.
Then when he want to draw AP Invoice from the Good Receipt PO, he found that the WTax Amount is wrong.
It calculate as Total Amount - Down Payment.
He want WTax Amount calculate from Total Amount only (without - Down Payment).
Then he realize that the AP Invoice DP he creates is wrong. Should not have WTax = Yes in the detail row.
The question is: how to make the correction of this AP Invoice DP ?
The AP Invoice DP should have WTax = 'No' in detail row.
While now the AP Invoice DP already set WTax = 'Yes'.
Thanks you very much in advance.
Best regards,
Surya

Hi Surya......
The DP Account is unique at AP Down Payment Service Level.
You have to map it in Business Partner Master Data which comes into the Down Payment Service Invoice when you going to add it..........
Please check once again by defining account for down payment in Business Partner.....
Regards,
Rahul

DIFFIRENCE BETWEEN AP DOWN PAYMENT REQUEST AND AP DOWN PAYMENT INVOICE

HI
ALL
Please tell me the diffirence between AP DOWN PAYMENT REQUEST AND AP DOWN PAYMENT INVOICE
And Please tell me when those are applicable in practical scenarios in SAP B1
Prasad

Hi,
You can check these threads to find out more:
Re: AP Down Payment Request is not being Linked with AP Invoice
Re: Down Payment Problem....
Re: A/P down Payment Issue
Thanks,
Gordon

AP Down Payment Invoice not yet Draw Report

Hi All,
I'm trying to make a query of the AP Down Payment Invoice not Yet draw Report. Can any one tell me which table I should refer when I need to make a query? I checked the ODPO tables that's no field indicate that the Downpayment not yet draw. I also tried the ODPI table when I use that to draw the downpayment invoice to AP invoice. When I query that table it return me 0 line.
Please advice.
Looking forward advice and reply.
Thank you.
Regards,
Foong Yee

AP Down Payment Clearing Account has debit balance if it is not drawn to AP invoice.
Use General Ledger Report,Select AP Down Payment Clearing Account,Select this G/L account,
Select reqd. posting dates,Click Ok.
Now you can see AP Down Payment Invoice not yet Draw Report.

Create AP Down Payment Invoice

Dear All,
I have a problem when I creating AP Down payment Invoice using SDK SAP2007. Error message like this
"Chosen BP is not customer ODP1.Cardcode line: 1, 'v181'"
When i check in SAP B1 2007, V181 is already set to VENDOR.
Here is the code :
Set oCompany = New SAPbobsCOM.Company
    With oCompany
        .Server = "T9\sql2005"
        .CompanyDB = "blive"
        .UserName = "n2301"
        .Password = "n7hfd8sd22"
        .DbServerType = dst_MSSQL2005
        .language = ln_English
        .UseTrusted = False
        .DbUserName = "sa"
        .DbPassword = "23dsasdh8d"
    ierr = oCompany.Connect()
        If ierr <> 0 Then
            Call oCompany.GetLastError(lErr, sErr)
            MsgBox sErr
        Else
            MsgBox "OK"
        End If
    End With
    Set oDP = oCompany.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oDownPayments)
    With oDP
        .CardCode = "V181"
        .NumAtCard = "Ticket 001"
        .DownPaymentPercentage = CDbl(100)
        .DocDate = Now
        .DocDueDate = Now
        .DownPaymentType = SAPbobsCOM.DownPaymentTypeEnum.dptInvoice
        .Lines.ItemCode = "C1"
        .Lines.Quantity = CDbl("10")
        .Lines.Price = CDbl("200")
        .Lines.VatGroup = "ZI"
    End With
        lErr = oDP.Add()
        If lErr <> 0 Then
            Call oCompany.GetLastError(lErr, sErr)
            MsgBox sErr
        Else
            MsgBox "OK"
        End If
Thanks before
rgrds,
Edited by: Lunatic on Jun 25, 2009 6:24 AM

HI
Use the BoObjectTypes.oPurchaseDownPayments for A/P Down payments (purchase).
oDownPayments object is a A/R Down payment for (sales)
Regards,
J.
Edited by: Janos Nagy on Jun 25, 2009 9:32 AM

AP Down Payment Invoice Service

Dear all,
When I made an AP Down Payment Invoice Service, I want to choose Down Payment Clearing account from GL Account (row level), but when I browse the GL Account, there's no account appear.
Anybody knows ?
This is different with AP Down Payment Invoice Type Item, where at GL Account field (Row Level) , I can browse / choose any account, a list of account appear when browse.
Why at AP Down Payment Invoice type Service there's not appear GL Account on the list like AP DP type Item ?
Anybody can help ?
Thank you so much,
Surya

Hi Surya......
The DP Account is unique at AP Down Payment Service Level.
You have to map it in Business Partner Master Data which comes into the Down Payment Service Invoice when you going to add it..........
Please check once again by defining account for down payment in Business Partner.....
Regards,
Rahul

Customer Down Payment invoice (from delivery) not automatically assigned

If I create a Down payment invoice from Sales Order (and I paied it) on the final invoice the sistem automatically assigne the down payment invoice on the final invoice for the order.
If I do the same think but crerating the Down payment invoice from the delivery (and I paid it) when I create the final invoice I need to assigned it manually.
SBO 8.81 PL 06
I haven't found any set up for this, so I think is an error the sistem must work on the same way if the document is copied from the Sales order or delivey.
Someone know if there is some set up? or I need to open an error message to SAP?
Thanks

My question is:
If I make a sales order.
I create a down payment invoice using copy from SO.
I make the incomuing payment for the down payment invoice.
I create the delivery from the SO
I create the invoice from the delivery
The system apply automaticaly the down payment invoice to the invoice (because I select a delivery that is linked to the so that I used to create the down payment invoice).
If I make a sales order.
I create the delivery from the SO
I create a down payment invoice using copy from delivey.
I make the incomuing payment for the down payment invoice.
I create the invoice from the delivery
The system DO NOT apply automaticaly the down payment invoice to the invoice (even if also this document is linked to the delivery that I use to create the down payment invoice).
I know that I can select it manually. But I can select it manually also if I use the SO to create the down payment instead of the
delivery. Why if the situation is the same in the firs case the system do it automatil^cally and in the second case I need to do it manually?
Of course if I create a Down Payment invoice without selecting any document (SO, delivery..) the system don't know if you want to apply the payment to the final invoice.
But If I select the delivey to create the down payment (the same if I select the SO): I want to apply the down payment to the final invoice of this delivery and not to another delivery.

SQL-Query - AR Invoice and related AR Down Payment Invoices

Hello everybody,
I want to show all AR Down Payment Invoices related to a given AR Invoice, i.e. a query approximately in this form:
SELECT
T0.DocNum AS 'Invoice',
T0.DocDate AS 'Invoice Date',
T0.DocTotal AS 'Open Amount',
T1.<<DocNum>> AS 'Down Payment Invoice',
T1.<<DocDate>> AS 'Down Payment Invoice Date',
T1.<<Amount>> AS 'Down Payment Invoice Amount'
FROM
OINV T0 INNER JOIN <<Down Payment Invoices>> T1
ON T0.DocEntry = T1.<<DocEntry>>
WHERE
T0.DocNum = xxxxx
I want to know if such a table <<Down Payment Invoices>> exists and what its name is.
Thanks for your help!
Regards,
Frank Romeni

Thanks for the INV11 - but this table seems to be empty even for invoices we have related down payments, e.g.
SELECT
T0.DocNum, T0.DocTotal, T1.<<whatever you want>>
FROM
OINV T0 LEFT OUTER JOIN INV11 T1
ON T0.DocEntry = T1.DocEntry
WHERE
T0.DocNum = xxxxx
That INV11 is always empty I could see with SELECT * FROM INV11
Regards
Frank Romeni
P.S.: I only post questions to this forum when I analysed my problems and only if I couldn't find any further information in the helpfiles. With regard to your first hint to ODPI there is no reference to INV11 in the helpfiles.
With regard to your comments I feel impelled to to say that if my question is confusing you, then it seems that nobody has ever taught you that meaning can be taken from the context. Regarding the "street", you asked me to find something: Do not waste your time with talking precociously ...
If you should feel annoyed by my comments, we'd better stop this conversation. Otherwise let us fall back to a strictly factual exchange of information, OK? I am not willing to discuss this any further!
F.R.

A/R Down Payment Invoice and A/R Invoice

Dear Experts,
I have thousands of A/R Down Payment Invoices (Not Yet Fully Applied) that were suppose to be applied to the correct A/R Invoice through an integration that didn't work. Is there an easy way or any way to apply the down payments to the correct invoice now in batch. There are so many now that trying to use the Total Down Payment Button "..." crash the system.

Dear Gordon,
We get about 400 to 500 A/R Invoices a day. And right now we have 13,000 down payments we need to match. Oh by the way we are on SAP B1 8.8 Patch 15

Close Open Amount on A/P Down Payment Invoice

Hi,
I have the following scenario:
I have created an A/P down payment invoice for 1000$
Create an Outgoing Payment for this A/P Down Payment Invoice for 1000$
This payment is closing the A/P Down Payment invoice
Create an A/P Invoice for 800$ - apply this amount from the A/P Down Payment invoice (updating Amount to draw to 800$). The A/P invoice will close.
The issue is how to get the money back from the supplier closing also the open amount of 200$ from the AP Down Payment Invoice.
I have tried to apply an A/P credit memo to the A/P Down Payment Invoice but the system does not display the open amount from Down Payment invoice.
Another way I have tried to create a manual A/P Credit Memo to BP and manually closing the open amount on A/P Down Payment Invoice but the system would not allowed me to cancel or remove the open amount on the Down payment.
Do you have any other ideas?
I am working with SAP B1 2007 PL42.
Thank you,
Alex

Hi Alex
please create a message for SAP Business One Support with high priority and all the details.
regards
Rui Pereira
SAP Business One Forums Team

Amout check on Down payment Invoice

Similar Messages

Maybe you are looking for