A/p Down Payment Request and A/p Down payment Invoice

hi All,
I am Using SAP B1 2005B
A/p Down Payment Request :-
1.Wnen i want to give a 50% Advance Based on Purchase Order What is the Procedure. whether i have to use A/p Down payemnt request or A/p down payemnt invoice.
2.whenever i am making down payment request there is no JE and There is No GL and BP affected.
2.a. While making payment against down payment request there are 3 accounts hitted
1.Bank Account.
2. Bp(As Advance-Debit balance)
3.GL linked with BP.(Acccounts payable).
Is Correct or Not?
3. While Making A/p Invoice can we pick this Advace in A/p invoice Entry and can we Adjust .
at this stage Whenever i want to Check the balance of the BP should be Debit Balance(as Advance).
A/p Down payment Invoice:-
What is the Procedure, When it will be Used and What are the GL affected.
Thanks & Regards,
yusuff

Hi,
We are using A/p Down Payment Invoice where the entry is
Party Credited
Advance for capital purhase ie. ofset account is debited
and making payment
Party Debited
Bank Credited
and when linking with Invoice
Advance for capital purhase ie. ofset account is credited
GRNI of Asset A/c is debited.
Here the main issue is in Party ledger its showing 1st credit and then debit and your requirement that Party should be shown debit balance it will be not there it will be in Offset account i.e "Advance for capital purhase ie. offset account"
Now you have to generate query base report if you want to show advances given to party.
This is what we are doing if there is any other possibility kindly revert back all experts.
Thanks
Kamlesh

Similar Messages

  • Combine Down Payment Request and Payment of Open Item

    I am paying $ 1000 to a vendor to cover $ 300 down payment request and $ 700 for an open invoice. Is it possible to make one payment transaction to cover “down payment request” and “payment of open item”? I want only one amount to appear in the bank ledger account. Thank you, Pravin

    Hi
    In payment program configuration under the payment method configuration for your company codes, make sure that under grouping of items, the  two radio buttons are not selected. This should combine the two items into one payment document. Screen shot attached
    regards
    Sanil Bhandari

  • Paid A/P down payment request is not visible in payment window

    Hi,
    SAP B1 8.81 PL 06
    My customer has created a down payment request and had made the payment in full
    He has created A/P invoice without down payment by mistake
    Now if we go to outgoing payment the paid down payment request is not showing up
    What to do in this case as i cannot reconcile the D/P by using internal reconcilliation
    Thanks
    Md.nazeer Shaikh

    Hello,
    Again confirm from customer that he made outgoing payment or not otherwise entry can not loss.
    Even you should check party ledger balance it is showing or not if not then user is not sure that he made or not.
    Thanks
    Manvendra Singh Niranjan

  • DIFFIRENCE BETWEEN AP DOWN PAYMENT REQUEST AND AP DOWN PAYMENT INVOICE

    HI
    ALL
    Please tell me the diffirence between AP DOWN PAYMENT REQUEST AND AP DOWN PAYMENT INVOICE
    And Please tell me when those are applicable in practical scenarios in SAP B1
    Prasad

    Hi,
    You can check these threads to find out more:
    Re: AP Down Payment Request is not being Linked with AP Invoice
    Re: Down Payment Problem....
    Re: A/P down Payment Issue
    Thanks,
    Gordon

  • Difference between A/p down payment request and invoice

    hi,
    can any tell me what is difference between A/P downpayment request and Invoice
    Regards
    Srinivas

    Hi Friend,
    I list some information here, which might help you better understand.
    Down Payment Invoices
    The Down Payment Invoice behaves like a regular Invoice. A Down Payment Invoice can be based on a Sales Quotation, a Sales/Purchase Order or a Delivery/Goods Receipt PO in the same way as a regular Invoice; however this will not close the base document.
    A Down Payment Invoice can be cancelled by a Credit Memo; however this Credit Memo cannot be based on multiple Down Payment Invoices.
    In addition, this Credit Memo will not affect the warehouse stock or the stock valuation.
    Note that cash discounts are not available in the Down Payment Invoice.
    The Down Payment Invoice will be displayed in the Tax Report as a regular Invoice (if Deferred Tax is not checked).
    Down Payment Request
    This method of Down Payments is suitable mainly for Germany where it is necessary to show the tax payable at the time of receipt of payment. A journal entry for the tax is created by the payment of a Down Payment Request. The payment will also be displayed in the Tax Report.
    A Down Payment Request can be based on a base document the same way as a regular
    Invoice; however it does not close this base document, i.e. the base document remains
    open and can be copied to another target document if required.
    Kind Regards,
    Dani Zhao
    SAP Business One Forums Team

  • Reconciliation of a A/R Down Payment Request and a A/R Invoice

    I want to do a reconciliation of a A/R Down Payment Request (100% paid of a total ) with a A/R Invoice. I want to do an internal reconciliation through BP> Internal Reconciliation > Reconciliation . A/R Down Payment Request is for 100% of the document total. I cannot create a Down Payment with the Down Payment Request and the invoice because the total es 0.00 . So I need to make an internal reconciliation. But when I select both documents, and press the reconcile button, the following errrors apears Payment transactions applied to down payment requests cannot be reconciled here   [Message 3821-19] How do I reconcile both documents ?

    Hi,
    The concept of Downpayment is to have the advance payment received booked in the system by creating a downpayment request/invoice.
    In your case the Downpayment Request is 100%, so it becomes difficult to apply the same to the Invoice in the Payment window.
    Through Internal Reconciliation window, the same cannot be reconciled. Check Note no. : 1340606 regarding the system behavior.
    The following options can be checked in the COPY of the database :
    1) Option of applying the Downpayment Request and the Invoice and making a payment of 0.01 cent and then transfering the same to the Rounding account.
    2) Checking the option of AR Reserve invoice in case there is 100% Downpayment.
    Please check and consult the account of the company.
    Kind Regards,
    Jitin
    SAP Business One Forum Team

  • Down payment request and special GL indicator

    Hi SAP Experts,
    From several days I'm looking for an explanation of standard down payment process in SAP:
    When we create down payment request for customer, billing type FAZ, corresponding FI document is created with special GL indicator "F".
    Does somebody know what is the configuration for that? How the system determines that for FAZ billing type it should create special GL indicator "F"?
    Thanks and appreciate any suggestions.

    Dear Marin  Please check in Google
    Does somebody know what is the configuration for that?

  • A/R Down Payment Request and Cash Flow

    Hi All,
    is there a way to present down payment requests in standard cash flow reports?
    Thanks in advance,
    Vangelis Kanellopoulos

    Hi Vangelis Kanellopoulos,
    Down Payment Request is only a Request.  Therefore, it is not linked to cash flow yet.  If you want the figure to show in cash flow report, you have to make your own user query report.
    Thanks,
    Gordon

  • DOWN PAYMENT REQUEST - asset number on down payment request.

    Concerning this request, you must know that we should use a 'dummy asset number' because down payments are not depreciable.
    With this dummy asset number (which is not depreciable); we have to :
    -validate the down payment request
    - generate the automatic payment, with the right dummy asset number.
    Right now, the program takes the down payment of the purchase order but not the dummy one.
    Does someone have already handle with this case ? The difficulty is to manage with the automatic payment run. Is still existing a BTE ?

    Hi,
    Create an AUC asset master and try to post down payment to that asset.
    Thanks,
    Srinu

  • Down Payment Request F-47. ( Advance payment against PO )

    Hi all,
    I am creating down payment request T-code F-47 w.r.t. Purchase order number,
    e.g. PO landed Value is INR 100.00, but system is allowing to create Down payment request of amount more than INR 100.00. Also after creating DPR w.r.t. Purchase order with PO landed price INR 100.00, you can create addition DPR w.r.t. same purchase order. This has resulted in giving double payment to vendor (T-code F-48).
    Please let us know any system lock / control can be set up to avoid advane payment to vendor more than po value.

    Check this link Advance payment  in PO should not Exceed 25%

  • Sales Credit Memos, Payment terms and due date for payment

    Hello all,
    does anyone out there know how to get the terms of payment assigned to sales credit memos taken into account when the due date for payment is calculated in the accounting document?  (I know this is a bit puzzling as why should one need payment terms for a credit memo)
    I have looked at SAP notes 17410 et al..but remain unclear re how 'V' is populated in BSEG-REBZG.

    Number of the Invoice the Transaction Belongs to
    For line items which are related to another line item, this field contains the number of the partner document.
    Use
    In the standard system the field is used for:
    o   Credit memos which refer to a particular invoice item
    o   Subsequent invoices for an invoice item
    o   Partial payments for an invoice item
    o   Partial clearings of down payments.
    In the first two cases mentioned, the terms of payment are copied from the cross-referenced invoice item into the item currently being processed. This ensures that items due on the same date are paid together by automatic payment.
    A special rule applies to credit memos which have a "V" in this field.  The due date is determined in the same way as for an invoice. If the field is empty (containing neither a document number nor a "V") the due date is the baseline date for payment.

  • Payment terms and discount voor the purchasing invoice

    Hi all,
    In the definitions of the payment terms, you can choose how the Due date should be based on: Document date, Posting date, System date or Closing date..we choose for the Document date. (due date = doc. date + 30 days)
    In the payment terms you can also define a cash discount if we pay the suppliers invoice within certain days, than we can deduct a discount of the total amount to be paid.
    So we define f.e. within 14 days, 2%.
    However the title of this colums says: Days after Posting date and the system also react like this.
    The posting date of the suppliers invoice can ofcourse be different as the document date of this suppl.invoice.
    F.e.: Suppliers Invoice: doc. date 30/9/2008, Posting date: 18/10/2008, Due Date 1/11/2008 (Doc.date + 30 days)
    Payment at 25/10/2008 by the payment wizard.
    The wizard still deduct 2 % as the due date of this invoice has not been reached, while the 2% should only be deducted if we pay before 14/10/2008.
    So as we defined the due date based on the Document date, but the cash discount uses the posting date. (column title)
    Is this wrong in the definitions or standard behaviour.
    How can I use the cash discount in the payment terms?
    Please advise.
    Best regards,
    Carl Verhagen

    Hi Peter,
    I'm talking about the A\R invoice.
    The supplier sent his invoice with document date 1/10/2008 and his payment terms is payment within 30 days.
    We receive the invoice at 3/10/2008 and after control etc. we will post the invoice at 7/10/2008.
    If we use the posting date as a base for the due date, the invoice have to be paid at 6/11/2008, but the suppliers due date is 31/10/2008 and that's a difference of 1 nearly week.
    If there are problems (f.e. caused by ourself) and the invoice will be booked at 20/10, we still have time to pay it before the due date 31/10 instead of 19/11/2008)
    I think that the supplier will not be amused if we use the posting date as the base for calculating the due date.
    We can discuss what's right to use, but SAP B1 gives the opportunity to choose between Doc.date, posting date and system date as a base for calculating the Due date but for cash discount it's automatically the posting date??
    Best regards,
    Carl Verhagen

  • Down Payment Request at Header Level of PO

    Dear Friends
    We want to create Down Payment Request and subsequently the Down Payment at Purchase Order Header Level. We are looking for a standard solution without any Custom Development.
    While creating a Down Payment Request (F-47) the system does not ask for the reference of the Purchase Order. But if Purchase Order Number is referred then the system will ask for the line item also.
    When we convert this Down Payment Request to Down Payment (F-48), we can refer the Purchase Order Number. If referred, the system asks for the line item also, which becomes mandatory.
    However we want to understand if there is a possibility of posting the Down Payment against the Purchase Order Header.
    This is required, since if there are multiple line items in the purchase order, then creation of Down Payment Request as well as Down Payment becomes a tedious activity in SAP.
    Someone innovative and has already worked on such requirement please reply.
    Regards
    Ketan Patel

    Hi,
    Try the following steps to pay to Vendor w.r.t PO:
    1.Check the Vendor reconciliation A/C,
    2.Go to FS00, and check Filed Status Group,
    3.Go to OBC4, check the Filed Status Group, what u have mentioned for the Vendor reconciliation account.
    4. Go To material management segment and put optional entry for the field of Purchase Order and save.
    5.Now come to F-48, enter the date, vendor, assign the sp.G/L transaction(A),bank sub account, amount,
    then enter, it will take to next screen
    Here you enter amount & your purchase order number with reference to your are going to make the payment. Now simulate and save.
    After the GR & IR is done, Perform F-54 for Down Payment Clearing
    Regards,
    Biju K

  • Partial payment for down payment request

    Dear All
    I have posted a 1000 INR down payment request by F-37. However, the customer only pays me for 700 INR.
    If i use F-29 to record the downpayment and try to link this 700 INR to the original down payment request then the system does not allow me to post and gives the message"Posting is only possible with a zero balance; correct document". Also if i click on additional line items the system does not let me create a new downpayment request (Spl GL F) with posting key 09.
    Request you to tell me if i can let 300 INR as down payment request and $700 as down payment received agsint the first downpayment request.
    Regards,
    Siddharth.

    Hi Shankar,
    I am working on EC 6.0 in case that is relevant.
    Agreed that a downpayment request is a noted item and wont affect balances. But when you recieve downpayment against that downpayment request, the system does not let you proceed if there is a difference between the downpayment request and the downpayment.
    my query is whether i can post that downpayment w.r.t to the downpayment request and create the residual amount as a new downpayment request.
    Thanks for your reply but the problem remains unresolved. Will award you points though

  • Internal Reconc. against Incoming payment made against down payment request

    Internal Reconc. against Incoming payment made against down payment request
    Dear Experts,
    Scenario: An incoming payment made against down payment request and create an A/R invoice when i try to reconcile both of them using Internal Reconciliation. It gives an Error: "Payment tranaction applied to down payment requests cannot be reconciled here".
    Can somebody please guide me, how can I reconcile both the documents mentioned above. (i.e. incoming payment made against down payment request and AR invoice).
    Thanks & Regards,

    Hi,
    You cannot reconcile the Incoming Payment and the AR Downpayment Request in the Internal Reconciliation window.
    AR Downpayment needs to be paid through the Payment window.
    There is a Note as well explaining the working. Note No. :1121093.
    Kind Regards,
    Jitin
    SAP Business One Forum Team
    Edited by: Jitin Chawla on Dec 7, 2011 2:15 PM

Maybe you are looking for