Amplitube 2 "Failed Validation" HELP
Hello all. I just received my knew Amplitube 2 software today, installed it just fine, but when I opened Logic Pro 8 up Amplitube 2 failed validation in the Audio Units manager. I had this happen to me before with ik multimedia's Ampeg SVX, but I still could find and use it within Logic. Not the case now with Amplitube 2. When SVX was installed on my G5 I never got a failed validation, but now in my iMac it happens every time. The big problem is I can't find or open the Amplitube 2 so therefore I can't register the darn thing.....this *****!! HELP PLEASE....HELP PLEASE! Thank you.
Mr. Confussed wrote:
The big problem is I can't find or open the AmpliTube 2 so therefore I can't register the darn thing.....this *****!! HELP PLEASE....HELP PLEASE!!!! Thank you.
I just had a similar thing happen with another IK Multimedia product. It turns out the AU was not Universal Binary, so I had to download a newer version so I could register.
First, you can go to http://www.ikmultimedia.com/registration. That's the URL on your registration card. Enter your software serial number along with the rest of the stuff, but leave the Digital ID field blank, as per the form's instructions ( +"If you choose Option 1, leave this field blank, complete all the other required fields, and click 'Submit'"+ ). Your software will then be registered, allowing you to access the download area where you'll find the latest version. Now, you should be able to run the standalone AmpliTube 2 application and go through the authorization process.
That said, however, the AmpliTube 2 plugin still does not work in Logic for me. I have to use it through AmpliTube X-Gear, which came with my Total Guitar & Bass bundle. Since AmpliTube X-Gear runs all my IK guitar plugins (AmpliTube 2, SVX, Jimi Hendrix, etc.) through a single interface, I never bothered (or had the need) to have AmpliTube 2 pass validation.
In summary, you can register your software using the above steps, then try validating it through Logic. If it doesn't work, you can at least contact their tech support as a registered user. Otherwise, get AmpliTube X-Gear...
I just checked their website. This may interest you:
+"For a limited period, all registered users of at least one “Powered by AmpliTube” product* including AmpliTube 2, Ampeg® SVX, AmpliTube Jimi Hendrix™, AmpliTube Metal and AmpliTube 2 Live will also receive a free download of AmpliTube X-GEAR in their User Area"+
-droo
Similar Messages
-
Dimension 'Years' failed validation
Hi All,
I am getting this error while deploying the application.
Error : Dimension 'Years' failed validation 'YearMembersSequential' for the following reason(s): Year members must be sequential.
I am seeing my Year dimension is sequential only.
I am not able to figure out the reason for this error . Can anyone please help me understand this.Not to open a new thread as I have an issue with dimension Year as well, I will post my problem here (hope the author won't mind).
I created a simple EPMA application in version 11.1.2.2 with all mandatory and 2 generic dimensions. One of mandatory dimension is, of course, Year (dimension type: Year) with following members: FY11, FY12, FY13. Initial deployment against both, Planning and Essbase went well. After that I wanted to extend dimension Year for member FY14 and to redeploy the application. Validation was successful, but deployment message was "Completed/With Errors" (100%). Deployment was done with selecting "Refresh outline" and "Full deploy". In deployment log file I have the following entry:
"Consolidation operators for years must be set to Ignore for all plan types."
"Rejecting Member FY14."
This message is clear enough, but the problem is that members that belong to dimension type Year don't even have consolidation operators in properties area.
What else comes to my mind is that (maybe) with version 11.1.2.2 it is not allowed to add new members for dimension Year once application is deployed for the very first time. But in that case, the above error message is quite misleading. Under version 11.1.1.3 it is possible to add new members to dimension Year and to redeploy it without errors.
Is this a bug or a feature?
Has anyone had such problem?
Thanks,
Damir -
Failed validation as a non-ragged hierarchy
After I define a TIME dimension and try to Maintain Dimension (Loading data at first time), it encounters error as below:
An error has occurred on the server
Error class: Express Failure
Server error descriptions:
INI: Error creating a definition manager, Generic at TxsOqConnection::generic<BuildProcess>
INI: XOQ-01714: "TIME_TEST_HA.TIME_TEST_HA" failed validation as a non-ragged hierarchy, Generic at TxsOqStdFormCommand::execute
at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
at oracle.olapi.data.source.DataProvider.callGeneric(Unknown Source)
at oracle.olapi.data.source.DataProvider.executeBuild(Unknown Source)
at oracle.olap.awm.wizard.awbuild.UBuildWizardHelper$1.construct(Unknown Source)
at oracle.olap.awm.ui.SwingWorker$2.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Here is the data from related table TIME_TEST:
SELECT * FROM TIME_TEST;
YEAR QUARTER MONTH DAY
2008 4 11 5
2008 1 2 6
2008 4 10 7
2009 1 1 1
2009 1 1 5
Any help will be appreciate!
Thanks,
SatineHi Stuart,
My OLAP version is 11.1.0.7, upgrading from 11.1.0.6.
Here is the XML file for the dimension.
<!DOCTYPE Metadata [
<!ENTITY % BIND_VALUES PUBLIC "OLAP BIND VALUES" "OLAP METADATA">
%BIND_VALUES;
]>
<Metadata
Version="1.1">
<TimeDimension
Name="DAD"
ETViewName="DAD_VIEW"
ETKeyColumnName="DIM_KEY"
ETLevelColumnName="LEVEL_NAME"
ETDimensionOrderColumnName="DIM_ORDER"
ETHierarchyOrderColumnName="HIER_ORDER">
<Hierarchy>
<LevelHierarchy
IsSkipLevel="False"
IsRagged="False"
Name="SAD"
ETParentColumnName="PARENT"
ETDepthColumnName="DEPTH"
ETViewName="DAD_SAD_VIEW">
<HierarchyLevel
DimensionLevel="YEAR">
<HierarchyLevelMap
KeyExpression="TEST_TEST."YEAR""
Query="TEST_TEST">
<AttributeMap
Name="DAD_YEAR_ID"
Expression="TEST_TEST."YEAR"">
<Attribute
Name="DAD_YEAR_ID"/>
</AttributeMap>
<AttributeMap
Name="END_DATE"
Expression="TO_DATE('2009-10-10', 'yyyy-mm-dd')">
<Attribute
Name="END_DATE"/>
</AttributeMap>
<AttributeMap
Name="TIME_SPAN"
Expression="200">
<Attribute
Name="TIME_SPAN"/>
</AttributeMap>
<AttributeMap
Name="YEAR_END_DATE"
Expression="TO_DATE('2009-10-10', 'yyyy-mm-dd')">
<Attribute
Name="YEAR_END_DATE"/>
</AttributeMap>
<AttributeMap
Name="YEAR_TIME_SPAN"
Expression="200">
<Attribute
Name="YEAR_TIME_SPAN"/>
</AttributeMap>
</HierarchyLevelMap>
</HierarchyLevel>
<HierarchyLevel
DimensionLevel="QUARTER">
<HierarchyLevelMap
KeyExpression="TEST_TEST."QUARTER""
Query="TEST_TEST">
<AttributeMap
Name="DAD_QUARTER_ID"
Expression="TEST_TEST."QUARTER"">
<Attribute
Name="DAD_QUARTER_ID"/>
</AttributeMap>
<AttributeMap
Name="END_DATE"
Expression="TO_DATE('2009-10-10', 'yyyy-mm-dd')">
<Attribute
Name="END_DATE"/>
</AttributeMap>
<AttributeMap
Name="QUARTER_END_DATE"
Expression="TO_DATE('2009-10-10', 'yyyy-mm-dd')">
<Attribute
Name="QUARTER_END_DATE"/>
</AttributeMap>
<AttributeMap
Name="QUARTER_TIME_SPAN"
Expression="200">
<Attribute
Name="QUARTER_TIME_SPAN"/>
</AttributeMap>
<AttributeMap
Name="TIME_SPAN"
Expression="200">
<Attribute
Name="TIME_SPAN"/>
</AttributeMap>
</HierarchyLevelMap>
</HierarchyLevel>
<HierarchyLevel
DimensionLevel="MONTH">
<HierarchyLevelMap
KeyExpression="TEST_TEST."MONTH""
Query="TEST_TEST">
<AttributeMap
Name="DAD_MONTH_ID"
Expression="TEST_TEST."MONTH"">
<Attribute
Name="DAD_MONTH_ID"/>
</AttributeMap>
<AttributeMap
Name="END_DATE"
Expression="TO_DATE('2009-10-10', 'yyyy-mm-dd')">
<Attribute
Name="END_DATE"/>
</AttributeMap>
<AttributeMap
Name="MONTH_END_DATE"
Expression="TO_DATE('2009-10-10', 'yyyy-mm-dd')">
<Attribute
Name="MONTH_END_DATE"/>
</AttributeMap>
<AttributeMap
Name="MONTH_TIME_SPAN"
Expression="200">
<Attribute
Name="MONTH_TIME_SPAN"/>
</AttributeMap>
<AttributeMap
Name="TIME_SPAN"
Expression="200">
<Attribute
Name="TIME_SPAN"/>
</AttributeMap>
</HierarchyLevelMap>
</HierarchyLevel>
<Description
Type="Description"
Language="ENGLISH"
Value="Sad">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Sad">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Sad">
</Description>
</LevelHierarchy>
</Hierarchy>
<DimensionLevel
Name="YEAR"
ETKeyColumnName="YEAR">
<Description
Type="Description"
Language="ENGLISH"
Value="Year">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Year">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Year">
</Description>
<UniqueKeyAttribute
Name="DAD_YEAR_ID"/>
<VisibleAttribute
Name="YEAR_END_DATE"/>
<VisibleAttribute
Name="YEAR_TIME_SPAN"/>
<VisibleAttribute
Name="YEAR_LONG_DESCRIPTION"/>
<VisibleAttribute
Name="YEAR_SHORT_DESCRIPTION"/>
</DimensionLevel>
<DimensionLevel
Name="QUARTER"
ETKeyColumnName="QUARTER">
<Description
Type="Description"
Language="ENGLISH"
Value="Quarter">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Quarter">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Quarter">
</Description>
<UniqueKeyAttribute
Name="DAD_QUARTER_ID"/>
<VisibleAttribute
Name="QUARTER_END_DATE"/>
<VisibleAttribute
Name="QUARTER_TIME_SPAN"/>
<VisibleAttribute
Name="QUARTER_LONG_DESCRIPTION"/>
<VisibleAttribute
Name="QUARTER_SHORT_DESCRIPTION"/>
</DimensionLevel>
<DimensionLevel
Name="MONTH"
ETKeyColumnName="MONTH">
<Description
Type="Description"
Language="ENGLISH"
Value="Month">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Month">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Month">
</Description>
<UniqueKeyAttribute
Name="DAD_MONTH_ID"/>
<VisibleAttribute
Name="MONTH_END_DATE"/>
<VisibleAttribute
Name="MONTH_TIME_SPAN"/>
<VisibleAttribute
Name="MONTH_LONG_DESCRIPTION"/>
<VisibleAttribute
Name="MONTH_SHORT_DESCRIPTION"/>
</DimensionLevel>
<Attribute>
<BaseAttribute
SQLDataType="DATE"
ETAttributeColumnName="END_DATE"
IsMultiLingual="False"
PopulateLineage="False"
IsVisibleForAll="True"
Name="END_DATE">
<Classification
Value="STAR"/>
<Description
Type="Description"
Language="ENGLISH"
Value="End Date">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="End Date">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="End Date">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="NUMBER"
ETAttributeColumnName="TIME_SPAN"
IsMultiLingual="False"
PopulateLineage="False"
IsVisibleForAll="True"
Name="TIME_SPAN">
<Classification
Value="STAR"/>
<Description
Type="Description"
Language="ENGLISH"
Value="Time Span">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Time Span">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Time Span">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="VARCHAR2(60)"
ETAttributeColumnName="LONG_DESCRIPTION"
IsMultiLingual="False"
PopulateLineage="False"
IsVisibleForAll="True"
Name="LONG_DESCRIPTION">
<Classification
Value="STAR"/>
<Description
Type="Description"
Language="ENGLISH"
Value="Long Description">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Long Description">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Long Description">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="VARCHAR2(60)"
ETAttributeColumnName="SHORT_DESCRIPTION"
IsMultiLingual="False"
PopulateLineage="False"
IsVisibleForAll="True"
Name="SHORT_DESCRIPTION">
<Classification
Value="STAR"/>
<Description
Type="Description"
Language="ENGLISH"
Value="Short Description">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Short Description">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Short Description">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="DATE"
ETAttributeColumnName="YEAR_END_DATE"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="END_DATE"
IsVisibleForAll="False"
Name="YEAR_END_DATE">
<Description
Type="Description"
Language="ENGLISH"
Value="Year End Date">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Year End Date">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Year End Date">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="NUMBER"
ETAttributeColumnName="YEAR_TIME_SPAN"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="TIME_SPAN"
IsVisibleForAll="False"
Name="YEAR_TIME_SPAN">
<Description
Type="Description"
Language="ENGLISH"
Value="Year Time Span">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Year Time Span">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Year Time Span">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="VARCHAR2(60)"
ETAttributeColumnName="YEAR_LONG_DESCRIPTION"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="LONG_DESCRIPTION"
IsVisibleForAll="False"
Name="YEAR_LONG_DESCRIPTION">
<Description
Type="Description"
Language="ENGLISH"
Value="Year Long Description">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Year Long Description">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Year Long Description">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="VARCHAR2(60)"
ETAttributeColumnName="YEAR_SHORT_DESCRIPTION"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="SHORT_DESCRIPTION"
IsVisibleForAll="False"
Name="YEAR_SHORT_DESCRIPTION">
<Description
Type="Description"
Language="ENGLISH"
Value="Year Short Description">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Year Short Description">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Year Short Description">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="DATE"
ETAttributeColumnName="QUARTER_END_DATE"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="END_DATE"
IsVisibleForAll="False"
Name="QUARTER_END_DATE">
<Description
Type="Description"
Language="ENGLISH"
Value="Quarter End Date">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Quarter End Date">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Quarter End Date">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="NUMBER"
ETAttributeColumnName="QUARTER_TIME_SPAN"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="TIME_SPAN"
IsVisibleForAll="False"
Name="QUARTER_TIME_SPAN">
<Description
Type="Description"
Language="ENGLISH"
Value="Quarter Time Span">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Quarter Time Span">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Quarter Time Span">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="VARCHAR2(60)"
ETAttributeColumnName="QUARTER_LONG_DESCRIPTION"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="LONG_DESCRIPTION"
IsVisibleForAll="False"
Name="QUARTER_LONG_DESCRIPTION">
<Description
Type="Description"
Language="ENGLISH"
Value="Quarter Long Description">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Quarter Long Description">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Quarter Long Description">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="VARCHAR2(60)"
ETAttributeColumnName="QUARTER_SHORT_DESCRIPTIO"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="SHORT_DESCRIPTION"
IsVisibleForAll="False"
Name="QUARTER_SHORT_DESCRIPTION">
<Description
Type="Description"
Language="ENGLISH"
Value="Quarter Short Description">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Quarter Short Description">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Quarter Short Description">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="DATE"
ETAttributeColumnName="MONTH_END_DATE"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="END_DATE"
IsVisibleForAll="False"
Name="MONTH_END_DATE">
<Description
Type="Description"
Language="ENGLISH"
Value="Month End Date">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Month End Date">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Month End Date">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="NUMBER"
ETAttributeColumnName="MONTH_TIME_SPAN"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="TIME_SPAN"
IsVisibleForAll="False"
Name="MONTH_TIME_SPAN">
<Description
Type="Description"
Language="ENGLISH"
Value="Month Time Span">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Month Time Span">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Month Time Span">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="VARCHAR2(60)"
ETAttributeColumnName="MONTH_LONG_DESCRIPTION"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="LONG_DESCRIPTION"
IsVisibleForAll="False"
Name="MONTH_LONG_DESCRIPTION">
<Description
Type="Description"
Language="ENGLISH"
Value="Month Long Description">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Month Long Description">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Month Long Description">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="VARCHAR2(60)"
ETAttributeColumnName="MONTH_SHORT_DESCRIPTION"
IsMultiLingual="False"
PopulateLineage="True"
AttributeGroupName="SHORT_DESCRIPTION"
IsVisibleForAll="False"
Name="MONTH_SHORT_DESCRIPTION">
<Description
Type="Description"
Language="ENGLISH"
Value="Month Short Description">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Month Short Description">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Month Short Description">
</Description>
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="VARCHAR2(8)"
ETAttributeColumnName="DAD_YEAR_ID"
IsMultiLingual="False"
PopulateLineage="False"
IsVisibleForAll="False"
Name="DAD_YEAR_ID">
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="VARCHAR2(8)"
ETAttributeColumnName="DAD_QUARTER_ID"
IsMultiLingual="False"
PopulateLineage="False"
IsVisibleForAll="False"
Name="DAD_QUARTER_ID">
</BaseAttribute>
</Attribute>
<Attribute>
<BaseAttribute
SQLDataType="VARCHAR2(6)"
ETAttributeColumnName="DAD_MONTH_ID"
IsMultiLingual="False"
PopulateLineage="False"
IsVisibleForAll="False"
Name="DAD_MONTH_ID">
</BaseAttribute>
</Attribute>
<Organization>
<AWPrimaryDimensionOrganization
MVOption="NONE"
HierarchyConsistencyRule="STAR_CONSISTENT"
AddUniqueKeyPrefix="True">
<MVCreationOptions
RefreshOn="DEMAND"
RefreshType="COMPLETE"
EnableRewriteMV="False"
UsingConstraintsClause="ENFORCED">
</MVCreationOptions>
<AttributeOrganization
CreateIndex="False"
Attribute="END_DATE">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="TIME_SPAN">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="LONG_DESCRIPTION">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="SHORT_DESCRIPTION">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="YEAR_END_DATE">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="YEAR_TIME_SPAN">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="YEAR_LONG_DESCRIPTION">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="YEAR_SHORT_DESCRIPTION">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="QUARTER_END_DATE">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="QUARTER_TIME_SPAN">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="QUARTER_LONG_DESCRIPTION">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="QUARTER_SHORT_DESCRIPTION">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="MONTH_END_DATE">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="MONTH_TIME_SPAN">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="MONTH_LONG_DESCRIPTION">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="MONTH_SHORT_DESCRIPTION">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="DAD_YEAR_ID">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="DAD_QUARTER_ID">
</AttributeOrganization>
<AttributeOrganization
CreateIndex="False"
Attribute="DAD_MONTH_ID">
</AttributeOrganization>
<AW
Name="&AW_NAME;"/>
<DefaultBuild>
<![CDATA[BUILD SPEC SYS_DEFAULT
LOAD,
COMPILE
)]]>
</DefaultBuild>
</AWPrimaryDimensionOrganization>
</Organization>
<Description
Type="Description"
Language="ENGLISH"
Value="Dad">
</Description>
<Description
Type="LongDescription"
Language="ENGLISH"
Value="Dad">
</Description>
<Description
Type="ShortDescription"
Language="ENGLISH"
Value="Dad">
</Description>
<TimeSpanAttribute
Name="TIME_SPAN"/>
<EndDateAttribute
Name="END_DATE"/>
<DefaultHierarchy
Name="SAD"/>
<ValueDescriptionAttribute
Name="LONG_DESCRIPTION"/>
<ShortValueDescriptionAttribute
Name="SHORT_DESCRIPTION"/>
</TimeDimension>
</Metadata>
You may want to have a test to change IsRagged="False" to IsRagged="True", then it woks well but the result is very stange.
And I find if the hierarchy is only with levels: YEAR and Quarter, then you can maintain it, but, for sure, the YEAR2009,QUARTER1 will overwrite YEAR2008,QUARTER1. If defining the hierarchy with levels:YEAR,QUARTER,MONTH, then you can't maintain it. On my opinion, it may because the data in third level MONTH can't identified the right routine to the higher level QUARTER.
Thanks,
Satine -
BEA-090513 "ServerIdentity failed validation" on single domain single server
Hi!
I'm getting loads of
<Error> <Security> <BEA-090513> <ServerIdentity failed validation, downgrading
to anonymous.>
errors though I'm running a single server in a single domain - so the information
in
http://e-docs.bea.com/wls/docs81/messages/Security.html
isn't very helpful. What can I do to remove this problem?
Thanks so much,
Hans-Peter StoerrHi I get the similar error
<Error> <Security> <BEA-090513> <ServerIdentity failed validation, downgrading to anonymous.>
<Sep 12, 2007 4:04:51 PM CDT> <Error> <Security> <BEA-090513> <ServerIdentity failed validation, downgrading to anonymous.>
####<Sep 12, 2007 2:47:32 PM CDT> <Error> <Security>sb1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Defau
lt (self-tuning)'> <<WLS Kernel>> <> <> <1189626452736> <BEA-090513> <ServerIdentity failed validation, downgrading to anonymous.>
####<Sep 12, 2007 2:47:32 PM CDT> <Error> <Security> > <sb1> <ExecuteThread: '8' for queue: 'weblogic.socket.Muxer'> <<WLS
Kernel>> <> <> <1189626452759> <BEA-090513> <ServerIdentity failed validation, downgrading to anonymous.>
####<Sep 12, 2007 2:47:32 PM CDT> <Error> <Security> < <sb1> <ExecuteThread: '8' for queue: 'weblogic.socket.Muxer'> <<WLS
Kernel>> <> <> <1189626452760> <BEA-090513> <ServerIdentity failed validation, downgrading to anonymous.>
I tried the bea method to change the credentials that the domain is interacting with (trust certificate) but no help.The errors keep coming still.
iN order to rule out some possiblity i shutdown the other domain completley and i could still see same errors in my managed server logs.i would really appreciate anyones tips to fix this issue. -
ServerIdentity failed validation
I am porting over some code from WebLogic 6.1 to 8.1 and getting the following
errors. Any clue as to what these might be? Thanks.
<Error> <Security> <BEA-090513> <ServerIdentity failed validation, downgrading
to anonymous.>
<Error> <JTA> <BEA-110200> <User [<anonymous>] is not authorized to invoke startCommit
on a transaction branch.>The problem went away after I established trust between the two domains. Thanks
so much for your help.
Naresh
"Peter" <PeterB> wrote:
>
"Naresh Bhatia" <[email protected]> wrote in message
news:[email protected]..
I am porting over some code from WebLogic 6.1 to 8.1 and getting thefollowing
errors. Any clue as to what these might be? Thanks.
<Error> <Security> <BEA-090513> <ServerIdentity failed validation,downgrading
to anonymous.><messagedetail>
The ServerIdentity failed validation. Within this domain, the server
identity is downgraded to Anonymous.
</messagedetail>
<cause>
Trust has not been properly established between two domains.
</cause>
<action>
See the documentation on Enabling Trust Between WebLogic Domains at
http://e-docs.bea.com.
</action> -
Failed validation as a level hierarchy
Hi,
I have dimension called SKU in my analytic workspace with a hierarchy PRODUCTS defined as ALLPRODUCTS<--MD<--MG<--PG<--STYLE<--PRODUCT. I have used composite keys as Members to maintain uniqueness. For example the member expression for PG is CUBE_DEV.DIMSKU.MDID || CUBE_DEV.DIMSKU.MGID || CUBE_DEV.DIMSKU.PGID. I'm not using Surrogate keys. When I hit the maintain Dimension SKU, LOAD NO SYNCH succeeds but the compile step fails with error
"INI: error creating a definition manager, Generic at TxsOqConnection::generic<BuildProcess>INI: XOQ-01712: "SKU.PRODUCTS" failed validation as a level hierarchy., Generic at TxsOqStdFormCommand::execute"
I looked at the rejected records and every record has the error "(XSRWLD13) Cannot change the level of a dimension member within a single load." Can anyone help me resolving this issue ?
I'm using AWM 11.2.0.1.0 on Oracle 11g R2 server.
Thanks,
RKDavid,
I looked at the data and found out that there were NULLs in many key columns. I updated all of them to the value 'Unknown'. Also I re-implemented Composite keys because I thought Type 2 dimension would pose problem in determining uniqueness. Now there are no errors and I could successfully load data into the dimension.
Below is the latest definition
<!DOCTYPE Metadata [
<!ENTITY % BIND_VALUES PUBLIC "OLAP BIND VALUES" "OLAP METADATA">
%BIND_VALUES;
]>
<Metadata
Version="1.2"
MinimumDatabaseVersion="11.2">
<StandardDimension
Name="SKU"
ETViewName="SKU_VIEW"
ETKeyColumnName="DIM_KEY"
ETLevelColumnName="LEVEL_NAME"
ETMemberTypeColumnName="MEMBER_TYPE"
ETDimensionOrderColumnName="DIM_ORDER"
DefaultHierarchy="PRODUCTS"
ETHierarchyOrderColumnName="HIER_ORDER"
ShortValueDescriptionAttribute="SHORT_DESCRIPTION">
<Organization>
<AWPrimaryDimensionOrganization
AW="&AW_NAME;"
AddUniqueKeyPrefix="True"
MVOption="NONE"
HierarchyConsistencyRule="CONSISTENT">
<MVCreationOptions
RefreshType="COMPLETE"
RefreshOn="DEMAND"
UsingConstraintsClause="TRUSTED">
</MVCreationOptions>
<DefaultBuild>
<![CDATA[BUILD SPEC SYS_DEFAULT
LOAD,
COMPILE
)]]>
</DefaultBuild>
<AttributeOrganization
Attribute="SHORT_DESCRIPTION">
</AttributeOrganization>
</AWPrimaryDimensionOrganization>
</Organization>
<DimensionLevel
Name="MERCHDIVISION"
ETKeyColumnName="MERCHDIVISION">
<Description
Type="LongDescription"
Language="AMERICAN"
Value="MERCHDIVISION">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="MERCHDIVISION">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="MERCHDIVISION">
</Description>
</DimensionLevel>
<DimensionLevel
Name="MERCHGROUP"
ETKeyColumnName="MERCHGROUP">
<Description
Type="LongDescription"
Language="AMERICAN"
Value="MERCHGROUP">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="MERCHGROUP">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="MERCHGROUP">
</Description>
</DimensionLevel>
<DimensionLevel
Name="PRODUCTGROUP"
ETKeyColumnName="PRODUCTGROUP">
<Description
Type="LongDescription"
Language="AMERICAN"
Value="PRODUCTGROUP">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="PRODUCTGROUP">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="PRODUCTGROUP">
</Description>
</DimensionLevel>
<DimensionLevel
Name="STYLE"
ETKeyColumnName="STYLE">
<Description
Type="LongDescription"
Language="AMERICAN"
Value="STYLE">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="STYLE">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="STYLE">
</Description>
</DimensionLevel>
<DimensionLevel
Name="PRODUCT"
ETKeyColumnName="PRODUCT">
<Description
Type="LongDescription"
Language="AMERICAN"
Value="PRODUCT">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="PRODUCT">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="PRODUCT">
</Description>
</DimensionLevel>
<Description
Type="LongDescription"
Language="AMERICAN"
Value="sku">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="sku">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="sku">
</Description>
<Hierarchy>
<LevelHierarchy
Name="PRODUCTS"
IsSkipLevel="True"
IsRagged="True"
ETParentColumnName="PARENT"
ETDepthColumnName="DEPTH"
ETViewName="SKU_PRODUCTS_VIEW">
<HierarchyLevel
DimensionLevel="MERCHDIVISION">
<HierarchyLevelMap
KeyExpression="DIMSKU.MDID"
Query="DIMSKU">
<AttributeMap
Name="SHORT_DESCRIPTION"
Attribute="SHORT_DESCRIPTION"
Expression="DIMSKU.MDID">
</AttributeMap>
</HierarchyLevelMap>
</HierarchyLevel>
<HierarchyLevel
DimensionLevel="MERCHGROUP">
<HierarchyLevelMap
KeyExpression="DIMSKU.MDID || DIMSKU.MGID"
Query="DIMSKU">
<AttributeMap
Name="SHORT_DESCRIPTION"
Attribute="SHORT_DESCRIPTION"
Expression="DIMSKU.MDID || ':' || DIMSKU.MGID">
</AttributeMap>
</HierarchyLevelMap>
</HierarchyLevel>
<HierarchyLevel
DimensionLevel="PRODUCTGROUP">
<HierarchyLevelMap
KeyExpression="DIMSKU.MDID || DIMSKU.MGID || DIMSKU.PGID"
Query="DIMSKU">
<AttributeMap
Name="SHORT_DESCRIPTION"
Attribute="SHORT_DESCRIPTION"
Expression="DIMSKU.MDID || ':' || DIMSKU.MGID || ':' || DIMSKU.PGID">
</AttributeMap>
</HierarchyLevelMap>
</HierarchyLevel>
<HierarchyLevel
DimensionLevel="STYLE">
<HierarchyLevelMap
KeyExpression="DIMSKU.MDID || DIMSKU.MGID || DIMSKU.PGID || DIMSKU.STYLE"
Query="DIMSKU">
<AttributeMap
Name="SHORT_DESCRIPTION"
Attribute="SHORT_DESCRIPTION"
Expression="DIMSKU.MDID || ':' || DIMSKU.MGID || ':' || DIMSKU.PGID || ':' || DIMSKU.STYLE">
</AttributeMap>
</HierarchyLevelMap>
</HierarchyLevel>
<HierarchyLevel
DimensionLevel="PRODUCT">
<HierarchyLevelMap
KeyExpression="DIMSKU.MDID || DIMSKU.MGID || DIMSKU.PGID || DIMSKU.STYLE || DIMSKU.SKU"
Query="DIMSKU">
<AttributeMap
Name="SHORT_DESCRIPTION"
Attribute="SHORT_DESCRIPTION"
Expression="DIMSKU.MDID || ':' || DIMSKU.MGID || ':' || DIMSKU.PGID || ':' || DIMSKU.STYLE || ':' || DIMSKU.SKU">
</AttributeMap>
</HierarchyLevelMap>
</HierarchyLevel>
<Description
Type="LongDescription"
Language="AMERICAN"
Value="PRODUCTS">
</Description>
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="PRODUCTS">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="PRODUCTS">
</Description>
</LevelHierarchy>
</Hierarchy>
<Attribute>
<BaseAttribute
Name="SHORT_DESCRIPTION"
IsVisibleForAll="True"
SQLDataType="NVARCHAR2(100)"
ETAttributeColumnName="SHORT_DESCRIPTION">
<Description
Type="ShortDescription"
Language="AMERICAN"
Value="Short Description">
</Description>
<Description
Type="LongDescription"
Language="AMERICAN"
Value="Short Description">
</Description>
<Description
Type="Description"
Language="AMERICAN"
Value="Short Description">
</Description>
<Classification
Value="STAR"/>
</BaseAttribute>
</Attribute>
</StandardDimension>
</Metadata>
But I'm facing problem if I put Names in Short Description attribute. I have fields MerchGroupName, MerchDivisionName, ProductGroupName, StyleName in the database table which I would love to use for short description. When I use them, the error is
INI: error creating a definition manager, Generic at TxsOqConnection::generic<BuildProcess>INI: XOQ-01600: OLAP DML error "ORA-34034: 1 is already a value of DEMANTRADW!SKU_MERCHDIVISION_SURROGATE." while executing DML "SYS.AWXML!R11_LOAD_DIM('SKU.DIMENSION' SYS.AWXML!___R11_LONG_ARG_VALUE(SYS.AWXML!___R11_LONG_ARG_DIM 1) 'MATCH' 'YES' 'YES' 'SKU.MERCHDIVISION.LEVEL' 'SKU.MERCHGROUP.LEVEL' 'SKU.PRODUCTGROUP.LEVEL' 'SKU.STYLE.LEVEL' 'SKU.PRODUCT.LEVEL' 'SKU.SHORT_DESCRIPTION.ATTRIBUTE' 'SKU.PRODUCTS.HIERARCHY')", Generic at TxsOqStdFormCommand::executeINI: XOQ-01601: error while loading data for Cube Dimension "CUBE_DEV.SKU" into the analytic workspace, Generic at TxsOqStdFormCommand::execute -
Dynamical changing HtmlInputText component style on failed validation...
...but once validation passes the modified style isn't reset...and when navigating away from the page and then back again, the component will still have the modified style.
this is for JSF1.1 because i understand JSF1.2 has a errorStyle property.
I understand once first entry the components are rendered and then stored in a component tree for subsequent display, but because i have dynamical changed the style property it seems to be stored in the component tree.
here is snippets of my code
JSP page
<h:inputText id="textName" styleClass="inputText" *validator="#{fieldValidators.validateText}"* value="#{customer.name}" required="true">
<f:validateLength minimum="1" maximum="40"></f:validateLength>
</h:inputText>
_FieldValidators class_
public void validateText(FacesContext context, UIComponent toValidate, Object value)
((UIInput)toValidate).setValid(false);
*((HtmlInputText)toValidate).setStyleClass("inputText inputValidationError");*
FacesMessage message = new FacesMessage(errorMessage);
context.addMessage(toValidate.getClientId(context), message);
the style class +inputValidationError+ sets the outline of the input type to be red. so input components highlight in red when validation fails.
so to recap my issue, when the failed validation is corrected, the component still has the +inputValidationError+ style applied, and when navigating away from the page and back to it +inputValidationError+ still is in its style, so still appears with the red border.
any help or recommendations would be really welcome.
thanks.Implement a PhaseListener which listens on the afterPhase of the RENDER_RESPONSE and get the clientId of all components which have a validation error by FacesContext#getClientIdsWithMessages() and put it in a HashSet or so. Then iterate recursively over all children of UIViewRoot and if it is an instance of UIInput, then (re)set the styleclass accordingly based on the presence of its clientId in the HashSet created before.
-
I am unable to receive or send email from my IPAD. The error message says "Connection to server failed". Help!! geandreamer44
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You will have to re enter your Wi-Fi password.
If nothing above helped, restart your router.
No data is lost due to a reset. -
my final cut is running extremely slow after having for 6 months. I use external hard drives and save nothing on my computer. it takes a long time to render now. do you think something is wrong with computer. took it to mac store but they fail to help me. I have a 13 inch mac book pro 10.6.8 8gb 2.3 gfz intel core i5
What did Apple tell you about what they did (or did not) find here?
See if working on the main disk is any faster.
USB2 is glacial, as I/O interconnects go. And USB2 disks have been known to fail, or sometimes to drop back to USB1 speeds, too. FireWire 800 is substantially faster than USB2, but still not as fast as the internal drive connections can provide.
Put another way, start varying your configuration, and see which configuration changes (still) have the problem, and which don't. -
Apple's Audio Units Fail Validation in Yosemite
Why do Apple's audio units fail validation in Yosemite
Anyone else having this problem ?
What's the fix ?
Even Logic Pro X 10.0.7 can't validate Apple's AU plugs.
[Rant: i have never been so disappointed with a Mac OS as i am with YO. Most of my midi/audio/video programs will not work because of the validation of AU/VST plugs. I am this close to trashing Yosemite . It reminds me of my OS 9 days: if you even looked in the wrong direction the system stop working.]are there any AU plugs here, in the components folder...?
-
File Browse is emptied after failed validation
Why does the file browse text box get emptied after a failed validation? Is there any way to prevent this?
To further explain, create a form on a page with two page items, a text box and a file browse item, then put a not null validation on the text box. When you submit the page with a null text box, but with a file selected for the browse button, then validation catches and throws the error message back to the user when the page refreshes. However, the file browse text box is emptied, and the user has to reselect the file before resubmitting the page.
Is this a bug, or just the way it is supposed to work? Any way around it?
Thanks,
Kris
Edited by: kshenn on Oct 31, 2008 7:06 AMHello,
>> Is this a bug, or just the way it is supposed to work?
This is not a bug. Actually, it has nothing to do with APEX. The behavior of the file browse item is controlled by the HTML standard, which clears the field for security reasons.
If you pay close attention to Denes example, you’ll see that even when the validation error page is displayed, the file browse item itself is being cleared. The JavaScript generated file path is the one that retain its value. I don’t have access to Denes code, but I’m assuming that in his uploading procedure he’s using the JavaScript generated path.
>> Any way around it?
Where the file browse item is concern, no workaround.
In your specific case, where the validation you need is “not null”, you can create a JavaScript validation, and fire it before submitting the page (as part of the submit button). That way, the browser will not clear the file browse item, because the page will not be submitted without proper values in your items.
Regards,
Arie. -
Server Crash : ServerIdentity failed validation, downgrading to anonymous
All,
Setup is as follows:
Domain has got an admin server and 2 managed servers.
Managed Server 1 on Machine 1
Managed Server 2 on Machine 2
Following error is continuously thrown in the logs :
<22-Jul-2010 09:54:45 o'clock> <Error> <Security> <managed1> <ExecuteThread: '2' for queue: 'weblogic.
socket.Muxer'> <<WLS Kernel>> <> <BEA-090513> <ServerIdentity failed validation, downgrading to anonymous.>
Can this 090513 error on JMS queue lead to a server crash ?
I also get the below error
<ExecuteThread: '2' for queue: 'weblogic.adm
in.RMI' : Executing(weblogic.management.internal.MBeanHomeImpl)> <<WLS Kernel>> <> <BEA-080003> <RuntimeException thrown by r
mi server: weblogic.management.internal.MBeanHomeImpl.getMBean(Ljavax.management.ObjectName;)
java.lang.NullPointerException.
java.lang.NullPointerException
at weblogic.management.internal.MBeanHomeImpl.getMBean(MBeanHomeImpl.java:109)
Regards,
RashiDoes this domain have rmi communication with another weblogic domain? If so this error would normally occur if you have not enabled domain trust between the domains. You can enable domain trust by following the steps in the below link :
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/secmanage/domain.html#wp1176064
Not sure is this alone will crash a server. Is there any other errors in the logs ? -
40222 Disabled item failed validation.
When I run a Forms app, I receive this error message after I click one of its buttons:
41012 Invalid value for field Renewal_Type
40222 Disabled item RB.Renewal_Type failed validation.
There is a radio group by that name in one of the blocks, although it has not been assigned to a canvas. I think the developer of this app may have intended it for another form that he was going to build, but never got to it; thus it's disabled. Is that what causes this error message or is it something else? How can I fix this? Thanks.
Edited by: Prohan on Sep 10, 2010 9:42 AMI found the answer here:
FRM - 40212 / FRM - 40222 error on a radio group during query
I can't say I understood the explanation for why it worked, but it did. -
AIP-13978: Error - the input xsd fails validation
Hi,
For an ebXML setup over Generic exchange. I have to perform validation against XSDs which are nested in structure.
So while setting up the Document definition in the Business action, I uploaded the files as zip files and provided the name of the root XSD file.
However on clicking finish the for business action I am getting the IP-13978: Error - the input xsd fails validation: java.lang.NullPointerException
In the log file error message is as given:
2007.03.12 at 14:40:16:093: AJPRequestHandler-ApplicationServerThread-5: BusinessLogicLayer - (ERROR) java.lang.NullPointerException
at oracle.tip.buslogic.datatypeimport.b2b.XMLSchemaImport.getXSDElement(XMLSchemaImport.java:259)
at oracle.tip.buslogic.datatypeimport.b2b.XMLSchemaImport.importXSD(XMLSchemaImport.java:609)
at oracle.tip.buslogic.datatypeimport.b2b.XMLSchemaImport.importZipFile(XMLSchemaImport.java:426)
at oracle.tip.buslogic.bll.b2b.GenericWizard.createNativeDatatype(GenericWizard.java:452)
at oracle.tip.buslogic.bll.b2b.DocumentProtocolWizard.createDocumentDefinition(DocumentProtocolWizard.java:1228)
at oracle.tip.buslogic.bll.b2b.DocumentProtocolWizard.createDocumentDefinition(DocumentProtocolWizard.java:1061)
at oracle.tip.tools.integration.buslogic.b2b.collaboration.CreateBusinessActionFinishEventHandler.performExtendedActions(CreateBusinessActionFinishEventHandler.java:245)
at oracle.tip.tools.integration.event.IPBaseUnboundEventHandler.performActions(IPBaseUnboundEventHandler.java:88)
at oracle.tip.tools.integration.event.IPEventHandler.handleEventIP(IPEventHandler.java:138)
at oracle.tip.tools.integration.event.IPEventHandler.handleEvent(IPEventHandler.java:104)
at oracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown Source)
at oracle.cabo.servlet.event.TableEventHandler.handleEvent(Unknown Source)
at oracle.cabo.servlet.event.BasePageFlowEngine.handleRequest(Unknown Source)
at oracle.cabo.servlet.AbstractPageBroker.handleRequest(Unknown Source)
at oracle.cabo.servlet.ui.BaseUIPageBroker.handleRequest(Unknown Source)
at oracle.cabo.servlet.PageBrokerHandler.handleRequest(Unknown Source)
at oracle.cabo.servlet.UIXServlet.doGet(Unknown Source)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:740)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:824)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:330)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:830)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:224)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:133)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:186)
at java.lang.Thread.run(Thread.java:534)
2007.03.12 at 14:40:16:093: AJPRequestHandler-ApplicationServerThread-5: UI - (ERROR) oracle.tip.tools.integration.buslogic.b2b.collaboration.CreateBusinessActionFinishEventHandler.handleEvent(): Error -: AIP-13978: Error - the input xsd fails validation: java.lang.NullPointerException
Please let me know to resolve this issue.
Thanks,
GauthamPlease check the root xsd and it its dependent XSD are present
-
OLE DB Destination" failed validation and returned validation status "VS_ISBROKEN.
Hi
I have a package which has 10 sequence containers. Have 10 Flat File Source files and all is working perfect on BI Debug mode. When I deploy this package to server I am getting the following error.
I have changed the property Retain the same connection = True but same problem. I have changed the data flow task to Load Project instead of Load Into Project but in error message it is still showing the old name. I have tried to remove the whole step i.e.
Removed Load into Project Data flow with sequence container but I am getting the same error message.
I am not able to understand the reason. Any Idea why am I getting the same error message even I do not have the Data Flow named Load Into Package. It is in SSIS 2008 and being deployed on SQL 2012 server.
Message
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 15:28:32 Error: 2014-07-22
15:28:36.86 Code: 0xC020201B Source: Load Into Project OLE DB Destination [62] Description: The number of input columns for OLE DB Destination.Inputs[OLE DB Destination Input] cannot be zero. End Error Error:
2014-07-22 15:28:36.86 Code: 0xC004706B Source: Load Into Project SSIS.Pipeline Description: "OLE DB Destination" failed validation and returned validation status "VS_ISBROKEN". End Error
Error: 2014-07-22 15:28:36.86 Code: 0xC004700C Source:
Load Into Project SSIS.Pipeline Description: One or more component failed validation. End Error Error: 2014-07-22 15:28:36.87 Code: 0xC0024107 Source: Load Into Project Description:
There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 15:28:32 Finished: 15:28:36 Elapsed: 4.39 seconds. The package execution failed. The
step failed.
Many Thanks.
MH
this the error log
starttime
endtime
event
source
message
57:26.0
57:26.0
OnError
Load Into Project
The number of input columns for OLE DB Destination.Inputs[OLE DB Destination Input] cannot be zero.
57:26.0
57:26.0
OnError
Load Into Project
OLE DB Destination failed validation and returned validation status "VS_ISBROKEN".
57:26.0
57:26.0
OnError
Load Into Project
One or more component failed validation.
57:26.0
57:26.0
OnError
Load Into Project
There were errors during task validation.
57:19.0
57:19.0
OnPostExecute
Load Into TrialBalance
57:19.0
57:19.0
OnPostExecute
Trial Balance
57:19.0
57:19.0
OnPostExecute
SSIS_LoadCheck_CoreManGroup
57:19.0
57:19.0
PackageEnd
SSIS_LoadCheck_CoreManGroup
End of package execution.
57:18.0
57:18.0
OnPostExecute
Load Into JournalLine
57:18.0
57:18.0
OnPostExecute
JournalLine
57:18.0
57:18.0
OnPreExecute
Trial Balance
57:18.0
57:18.0
OnPreExecute
Truncate TrialBalance
57:18.0
57:18.0
OnPostExecute
Truncate TrialBalance
57:18.0
57:18.0
OnPreExecute
Load Into TrialBalance
57:07.0
57:07.0
OnPostExecute
Load Into Journal Type
57:07.0
57:07.0
OnPostExecute
JournalType
57:07.0
57:07.0
OnPreExecute
JournalLine
57:07.0
57:07.0
OnPreExecute
Truncate Table JournalLine
57:07.0
57:07.0
OnPostExecute
Truncate Table JournalLine
57:07.0
57:07.0
OnPreExecute
Load Into JournalLine
57:05.0
57:05.0
OnPostExecute
Load Into UserName
57:05.0
57:05.0
OnPostExecute
UserName
57:05.0
57:05.0
OnPreExecute
Business Area
57:05.0
57:05.0
OnPreExecute
Truncate Table Business Area
57:05.0
57:05.0
OnPostExecute
Truncate Table Business Area
57:05.0
57:05.0
OnPreExecute
Load Into Business Area
57:05.0
57:05.0
OnPostExecute
Load Into Business Area
57:05.0
57:05.0
OnPostExecute
Business Area
57:05.0
57:05.0
OnPreExecute
Cost Centre
57:05.0
57:05.0
OnPreExecute
Truncate CostCenter
57:05.0
57:05.0
OnPostExecute
Truncate CostCenter
57:05.0
57:05.0
OnPreExecute
Load Into Cost Centre
57:05.0
57:05.0
OnPostExecute
Load Into Cost Centre
57:05.0
57:05.0
OnPostExecute
Cost Centre
57:05.0
57:05.0
OnPreExecute
Project Status
57:05.0
57:05.0
OnPreExecute
Truncate Table Project Status
57:05.0
57:05.0
OnPostExecute
Truncate Table Project Status
57:05.0
57:05.0
OnPreExecute
Load Into Project Status
57:05.0
57:05.0
OnPostExecute
Load Into Project Status
57:05.0
57:05.0
OnPostExecute
Project Status
57:05.0
57:05.0
OnPreExecute
Project
57:05.0
57:05.0
OnPreExecute
Truncate Table Project
57:05.0
57:05.0
OnPostExecute
Truncate Table Project
57:05.0
57:05.0
OnPreExecute
Load Project
57:05.0
57:05.0
OnPostExecute
Load Project
57:05.0
57:05.0
OnPostExecute
Project
57:05.0
57:05.0
OnPreExecute
JournalType
57:05.0
57:05.0
OnPreExecute
Truncate Table Journal Type
57:05.0
57:05.0
OnPostExecute
Truncate Table Journal Type
57:05.0
57:05.0
OnPreExecute
Load Into Journal Type
57:03.0
57:03.0
OnPostExecute
Load Into Entity
57:03.0
57:03.0
OnPostExecute
Entity
57:03.0
57:03.0
OnPreExecute
Account
57:03.0
57:03.0
OnPreExecute
Truncate Table Accounts
57:03.0
57:03.0
OnPostExecute
Truncate Table Accounts
57:03.0
57:03.0
OnPreExecute
Load Into Account
57:03.0
57:03.0
OnPostExecute
Load Into Account
57:03.0
57:03.0
OnPostExecute
Account
57:03.0
57:03.0
OnPreExecute
UserName
57:03.0
57:03.0
OnPreExecute
Truncate Table User Name
57:03.0
57:03.0
OnPostExecute
Truncate Table User Name
57:03.0
57:03.0
OnPreExecute
Load Into UserName
57:02.0
57:02.0
PackageStart
SSIS_LoadCheck_CoreManGroup
Beginning of package execution.
57:02.0
57:02.0
OnPreExecute
SSIS_LoadCheck_CoreManGroup
57:02.0
57:02.0
OnPreExecute
CoA
57:02.0
57:02.0
OnPreExecute
Truncate Table CoA
57:02.0
57:02.0
OnPostExecute
Truncate Table CoA
57:02.0
57:02.0
OnPreExecute
Load Into CoA
57:02.0
57:02.0
OnPostExecute
Load Into CoA
57:02.0
57:02.0
OnPostExecute
CoA
57:02.0
57:02.0
OnPreExecute
Entity
57:02.0
57:02.0
OnPreExecute
Truncate Table Entity
57:02.0
57:02.0
OnPostExecute
Truncate Table Entity
57:02.0
57:02.0
OnPreExecute
Load Into EntityMessage
Executed as user: NT Service\SQLSERVERAGENT. Microsoft (R) SQL Server Execute Package Utility Version 11.0.2100.60 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved. Started: 15:28:32 Error: 2014-07-22
15:28:36.86 Code: 0xC020201B Source: Load Into Project OLE DB Destination [62] Description: The number of input columns for OLE DB Destination.Inputs[OLE DB Destination Input] cannot be zero.
22 15:28:36.86 Code: 0xC004700C Source: Load Into Project 22 15:28:36.87 Code: 0xC0024107 Source: Load Into Project Description: There were errors during task validation. End
Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 15:28:32 Finished: 15:28:36 Elapsed: 4.39 seconds. The package execution failed. The step failed.
Hi MustafaH,
According to the error message(hightlight above), it seems it's a mapping issue that Naarasimha point out in the post above. Please check this carefully.
An OLE DB destination includes mappings between input columns and columns in the destination data source. You do not have to map input columns to all destination columns, but depending on the properties of the destination columns, errors can occur if
no input columns are mapped to the destination columns.
Reference form: http://msdn.microsoft.com/en-us/library/ms141237.aspx
In your post, you said that it is in SSIS 2008 and being deployed on SQL 2012 server. Do you mean that you create the package deployment utility by using SSIS 2008, and then implement SSIS deployment in SSIS 2012 environment? If so, you need to
convert the project to package deployment model to generate Manifest file in SSIS 2012. Please see:
Use the SQL Server 2008 version of Business Intelligence Development Studio to develop and maintain packages that are based on SQL Server 2008 Integration Services (SSIS)
Use SQL Server Data Tools - Business Intelligence for Visual Studio 2012 to develop and maintain packages that are based on SQL Server 2012 Integration Services (SSIS).
For more information, please see:
Interoperability and Coexistence (Integration Services):
http://msdn.microsoft.com/en-us/library/bb522577.aspx?ppud=4
If you have any feedback on our support, please click
here.
Elvis Long
TechNet Community Support
Maybe you are looking for
-
How do I have my articles on website print automatically to Adobe pdf?
Hello, I am the editor of the website theidchannel.com, and often the users desire to print the articles. How do I make the article-document automatically appear as an Adobe pdf when the user select to print? Thanks! DK
-
I am currently studying for higher ed, and taking a class that includes AS3 teachings. For my exams I am expected to present a program I've made, and I can make anything I care for, it should be of some size and so I am having difficulties choosing s
-
Help: Think my bridge is corrupting images
Hello, I'm having problems with Adobe Bridge CS5 to view images that were formerlybeing displayed normally. Some of the images I download now also have problems in viewing. The format ofof the images is always in Camera Raw 2 ( CR2). I work with two
-
I downloaded latest update of iTunes (windows 7, 64bit) and have now the problem runtime error R6025 pure virtual function call (Microsoft Visual C runtime library) - Who would have a solution to that problem? Thanks from Switzerland <Edited by Hos
-
How to move NI hypertrend control around on Labview front panel
Hi everyone, Please I would like to know if the NI hypertrend control from the DSC pallette can be draged across the front panel and how to do it. Once I put this control on the front panel, it just stays where I put it and would not allow me to move