"An AIM service error occurred. Error: Serv:RequestTimeout" - Please help.
So I've been having the dreaded
"An AIM service error occurred.
Error: Serv:RequestTimeout"
pretty much ever since I got my MacBook Pro a year ago. Up until recently, it only popped up maybe once a month. But now it's gotten to the point where I get the error message within 5-10 minutes of a chad starting with someone else. I have tried changing the port and whatnot, but I still get the same error message. I have gone through pages of similar topic forums, but no solution has fixed my problem.
Does anyone have any advice?
P.S. I tried switching to Adium. I hate it.
Shut down the computer any router and modem.
Repower the Modem and wait until it says it is Ready.
Then any Router and wait again.
Lastly power up the computer.
Also check that any DNS servers listed in the modem or router set up pages are copied across to the Mac > System Preferences > Network (Maybe advanced button > DNS tab).
8:43 PM Monday; August 17, 2009
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
Similar Messages
-
HT201263 The iphone software cannot be connected. an unknown error occured (1480).. Please HELP :(
The iphone software cannot be connected. an unknown error occured (1480).. Please HELP
Google may provide some assistance. Start with DFU mode to see
what that does for your problem.
Discussion of jailbroken iPhones is prohibited by Terms of Service for this forum.
Contact the developers of the jailbreak you used - they support their software,
don't they? -
users are able to pick the SSAS database and cube, it's at the final step and suddenly excel had this error:
The following system error occurred: the server threw an exception...
Other users have no such issues at all
any ideas?
thanks
--Currently using Reporting Service 2000; Visual Studio .NET 2003; Visual Source Safe SSIS 2008 SSAS 2008, SVN --Hi Cat_ca,
Glad to hear that your issue had been solved by yourself. Thank you for your sharing.
Regards,
Charlie Liao
TechNet Community Support -
An error occur on server. printing will be stopped.
we have crystal report for VS 2010 Version : 13
I have an issue regarding printing. when we print approx 200-300 pages, after printing near about 40 page, printing will be stopped with error "An error occured on server. Printing Will be stopped".
Please help us....Use the search string 'printing stopped crystal net' in the search box in the top right corner. This will bring up a number of KBAs and other resources you want to consider. Also, make sure you are using Service pack 9.
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter -
RemoteException: 111 java.rmi.ServerError: Error occurred in server thread
Hi,
I'm just new to the RMI field of JAVA. I'm trying to write a program that import the math.jar file in the server side. And the client end can invoke the methods of math.jar and get the value.
I got the error messages as below:
RemoteException: 111 java.rmi.ServerError: Error occurred in server thread; nested exception is:
java.lang.NoClassDefFoundError: org/mathwhizz/Heron
It can work well if I use source classes(*.class) directly instead of importing math.jar. The failure only happened when I try to make use of jar file. Thus I guess my setup and configuration should be ok. Is there anything I should be very careful if I try to run RMI and import a jar file in the program of server side ?
Do I need to use JNLP and web start application in this issue?
I'm appreciated for your responses...thanks...
Sincerely,
BrandonI've got a problem with rmi, when I launch my server, I have this error:
Erreur du remote: java.rmi.ServerError: Error occurred in server thread; nested exception is:
java.lang.NoClassDefFoundError: com/borland/dx/dataset/DataSetData
Help me please
Thank you -
The upload has failed. An unknown server error occurred during processing. Please try again
I keep getting this message when I try to upload a folio "The upload has failed. An unknown server error occurred during processing. Please try again". It happens every time, some articles do upload but some not.
Thanks Automator21 I manage to upload most of my articles successfully by starting again the whole process. But I have 4 articles that I can't upload, all of this articles have big size videos (one 50mb, other one with 70mb, other with 4 small 30mb videos). I could upload those articles by taking the videos out, but I want those videos on my articles.
I use Adobe Media Encoder to compress the videos and they are not in high quality, for example the 70mb file is an 640x480 8 min. long video. And they are all with H.264 encoding and .mp4.
Do you know how can I fix this problem.
Thanks! -
Java.rmi.ServerError: A error occurred the server; nested exception is:
Hello Guys,
I'm getting the following error when calling a method of a normally
deployed facade session bean.
java.rmi.ServerError: A error occurred the server; nested exception is:
java.lang.AbstractMethodError
It's very confusing, it sometimes appear and sometimes the method is
invoked normally.
Thanks in advance for ur help.
Itani
[att1.html]That error means your are not running xserver process. Or, your ssh connection is not set-up to forward X-11 data.
-
I've been getting this message all day long, WHY?
"Oops! This link appears broken.
DNS error occurred. Server cannot be found.I've been getting this message all day long, WHY?
"Oops! This link appears broken.
DNS error occurred. Server cannot be found. -
Backup error occured, Error code 3700 "hostfile_error"
HI,
We are trying to MaxDB database backup to tape and getting below error.
===================================================================================================
ERR
-24988,ERR_SQL: SQL error
-104,DBM command impossible at this time
3,Data backup failed
Servertask Info: because Error in backup task occured
Job 1 (Backup / Restore Medium Task) [executing] WaitingT204 Result=3700
Error in backup task occured, Error code 3700 "hostfile_error"
Backupmedium #1 (
.\pipe\backup) I/O Error
Backup error occured, Error code 3700 "hostfile_error"
===================================================================================================
I went through the previous threads regarding the same error but couldn't find a solution.
System Info is Win 2008, MaxDB version 7.7.07.14.
Here is the complete log, please suggest what can be done.
===================================================================================================
DBA Action starts:
Timestamp: 20110831100408 Function: sda Object: DATA
2011-08-31 10:04:08
Using environment variable 'TEMP' with value 'C:\Windows\TEMP' as directory for temporary files and pipes.
Using connection to Backint for MaxDB Interface.
2011-08-31 10:04:09
Checking existence and configuration of Backint for MaxDB.
Using environment variable 'BSI_ENV' with value 'G:\sapdb\data\wrk\MXP\bsi.env' as path of the configuration file of Backint
Reading the Backint for MaxDB configuration file 'G:\sapdb\data\wrk\MXP\bsi.env'.
Found keyword 'BACKINT' with value 'D:\sapdb\MXP\db\bin\backint.exe'.
Found keyword 'INPUT' with value 'G:\sapdb\data\wrk\backint\sapdb.in'.
Found keyword 'OUTPUT' with value 'G:\sapdb\data\wrk\backint\sapdb.out'.
Found keyword 'ERROROUTPUT' with value 'G:\sapdb\data\wrk\backint\sapdb.err'.
Found keyword 'PARAMETERFILE' with value 'G:\sapdb\data\wrk\MXP\maxdb_config.par'.
Found keyword 'ORIGINAL_RUNDIRECTORY' with value 'G:\sapdb\MXP\sapdata'.
Finished reading of the Backint for MaxDB configuration file.
Using 'D:\sapdb\MXP\db\bin\backint.exe' as Backint for MaxDB program.
Using 'G:\sapdb\data\wrk\backint\sapdb.in' as input file for Backint for MaxDB.
Using 'G:\sapdb\data\wrk\backint\sapdb.out' as output file for Backint for MaxDB.
Using 'G:\sapdb\data\wrk\backint\sapdb.err' as error output file for Backint for MaxDB.
Using 'G:\sapdb\data\wrk\MXP\maxdb_config.par' as parameter file for Backint for MaxDB.
Using '300' seconds as timeout for Backint for MaxDB in the case of success.
Using '300' seconds as timeout for Backint for MaxDB in the case of failure.
Using 'G:\sapdb\MXP\sapdata\dbm.knl' as backup history of a database to migrate.
Using 'G:\sapdb\MXP\sapdata\dbm.ebf' as external backup history of a database to migrate.
Checking availability of backups using backint's inquire function.
Check passed successful.
2011-08-31 10:04:09
Checking medium.
Check passed successfully.
2011-08-31 10:04:09
Preparing backup.
Setting environment variable 'BI_CALLER' to value 'DBMSRV'.
Setting environment variable 'BI_REQUEST' to value 'NEW'.
Setting environment variable 'BI_BACKUP' to value 'FULL'.
Constructed Backint for MaxDB call 'D:\sapdb\MXP\db\bin\backint.exe -u MXP -f backup -t file -p G:\sapdb\data\wrk\MXP\maxdb_
Created temporary file 'G:\sapdb\data\wrk\backint\sapdb.out' as output for Backint for MaxDB.
Created temporary file 'G:\sapdb\data\wrk\backint\sapdb.err' as error output for Backint for MaxDB.
Writing '
.\pipe\backup #PIPE' to the input file.
Prepare passed successfully.
2011-08-31 10:04:09
Starting database action for
the backup.
Requesting 'SAVE DATA QUICK TO '
.\pipe\backup' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'BackupMXP'' from db-kernel.
The database is working on the request.
2011-08-31 10:04:09
Waiting until database has prepared the backup.
Asking for state of database.
2011-08-31 10:04:09 Database is still preparing the backup.
Waiting 1 second ...
Done.
Asking for state of database.
2011-08-31 10:04:10 Database has finished preparation of the backup.
The database has prepared the backup successfully.
2011-08-31 10:04:10
Starting Backint for MaxDB.
Starting Backint for MaxDB process 'D:\sapdb\MXP\db\bin\backint.exe -u MXP -f backup -t file -p G:\sapdb\data\wrk\MXP\maxdb_
Process was started successfully.
Backint for MaxDB has been started successfully.
2011-08-31 10:04:10
Waiting for end of the backup operation.
2011-08-31 10:04:10 The backup tool is running.
2011-08-31 10:04:10 The database is working on the request.
2011-08-31 10:04:15 The backup tool is running.
2011-08-31 10:04:15 The database is working on the request.
2011-08-31 10:04:25 The backup tool is running.
2011-08-31 10:04:25 The database is working on the request.
2011-08-31 10:04:40 The backup tool is running.
2011-08-31 10:04:40 The database is working on the request.
2011-08-31 10:05:00 The backup tool is running.
2011-08-31 10:05:00 The database is working on the request.
2011-08-31 10:05:13 The backup tool process has finished work with return code 2.
2011-08-31 10:05:13 The database has finished work on the request.
Receiving a reply from the database kernel.
Got the following reply from db-kernel:
SQL-Code :-903
The backup operation has ended.
2011-08-31 10:05:13
Filling reply buffer.
Have encountered error -24920:
The backup tool failed with 2 as sum of exit codes. The database request failed with error -903.
Constructed the following reply:
ERR
-24920,ERR_BACKUPOP: backup operation was unsuccessful
The backup tool failed with 2 as sum of exit codes. The database request failed with error -903.
Reply buffer filled.
2011-08-31 10:05:13
Cleaning up.
Copying output of Backint for MaxDB to this file.
Begin of output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.out)----
Reading parameter file G:\sapdb\data\wrk\MXP\maxdb_config.par.
Using staging area D:\TEMP\STAGE1 with a size of 1048576000 bytes.
Using staging area D:\TEMP\STAGE2 with a size of 1048576000 bytes.
Using 2 file per Backint for Oracle call.
Using C:\Program Files\Tivoli\TSM\tdp_r3\ora64\backint.exe as Backint for Oracle.
Using G:\sapdb\data\wrk\MXP\initMXP.utl as parameterfile of Backint for Oracle.
Using G:\sapdb\data\wrk\MXP\BackintHistory.txt as history file.
Using G:\sapdb\data\wrk\backint\backint1.in as input of Backint for Oracle.
Using G:\sapdb\data\wrk\backint\backint1.out as output of Backint for Oracle.
Using G:\sapdb\data\wrk\backint\backint1.err as error output of Backint for Oracle.
Using a maximal delay for a Backint for Oracle call of 3600 seconds.
Reading input file G:\sapdb\data\wrk\backint\sapdb.in.
Backing up pipe
.\pipe\backup.
Found 1 entry in the input file.
Starting the backup.
Starting pipe2file program(s).
Waiting for creation of temporary files.
1 temporary file is available for backup.
Calling Backint for Oracle at 2011-08-31 10:05:12.
Calling 'C:\Program Files\Tivoli\TSM\tdp_r3\ora64\backint.exe -u MXP -f backup -t file -p G:\sapdb\data\wrk\MXP\initMXP.
Backint for Oracle ended at 2011-08-31 10:05:13 with return code 2.
Backint for Oracle output:
Backint for Oracle output: Data Protection for SAP(R)
Backint for Oracle output:
Backint for Oracle output: Interface between BR*Tools and Tivoli Storage Manager
Backint for Oracle output: - Version 6, Release 1, Modification 0.0 for Win x64 -
Backint for Oracle output: Build: 358 compiled on Nov 4 2008
Backint for Oracle output: (c) Copyright IBM Corporation, 1996, 2008, All Rights Reserved.
Backint for Oracle output:
Backint for Oracle output: BKI2027I: Using TSM-API version 6.2.3.1 (compiled with 5.3.2.0).
Backint for Oracle output: BKI2000I: Successfully connected to ProLE on port tdpr3ora64.
Backint for Oracle output: BKI0005I: Start of program at: 08/31/11 10:05:12 .
Backint for Oracle output: BKI1216E: There are no backup management classes available.
Backint for Oracle output: BKI1215I: Average transmission rate was 0.000 GB/h (0.000 MB/sec).
Backint for Oracle output: BKI1227I: Average compression factor was 1.000.
Backint for Oracle output: BKI0020I: End of program at: 08/31/11 10:05:13 .
Backint for Oracle output: BKI0021I: Elapsed time: 01 sec .
Backint for Oracle output: BKI0024I: Return code is: 2.
Backint for Oracle output:
Backint for Oracle error output:
Finished the backup unsuccessfully.
#ERROR
.\pipe\backup
End of output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.out)----
Removed Backint for MaxDB's temporary output file 'G:\sapdb\data\wrk\backint\sapdb.out'.
Copying error output of Backint for MaxDB to this file.
Begin of error output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.err)----
Backint for Oracle was unsuccessful.
End of error output of Backint for MaxDB (G:\sapdb\data\wrk\backint\sapdb.err)----
Removed Backint for MaxDB's temporary error output file 'G:\sapdb\data\wrk\backint\sapdb.err'.
Removed the Backint for MaxDB input file 'G:\sapdb\data\wrk\backint\sapdb.in'.
Have finished clean up successfully.
SAVE/RESTORE request:
SAVE DATA CANCEL
SAVE/RESTORE request accepted:
OK
SAVE/RESTORE result:
ERR
-24988,ERR_SQL: SQL error
-104,DBM command impossible at this time
3,Data backup failed
Servertask Info: because Error in backup task occured
Job 1 (Backup / Restore Medium Task) [executing] WaitingT204 Result=3700
Error in backup task occured, Error code 3700 "hostfile_error"
Backupmedium #1 (
.\pipe\backup) I/O Error
Backup error occured, Error code 3700 "hostfile_error"
DBA Action ends:
Timestamp: 20110831100513 State: Failure
===================================================================================================Hi Markus,
Thanks for quick response. I did checked KNLMSG file and it has XML file kind of information where as dbm.prt has some information and here it is
=================================================================================================
2011-08-31 10:18:30 0x00009ecc INF 1 DBMSrvCo A DBM Server client connection was established at 2011-08-31 10:18:29 (client process has process ID 24352 on computer 10.1.47.21).
2011-08-31 10:18:30 0x00009ecc INF 283 DBMSrv Command 'auto_extend show' is being executed.
2011-08-31 10:18:30 0x00009ecc INF 419 DBMSrv Command 'auto_extend' has ended with return code 0.
2011-08-31 10:18:30 0x00009ecc INF 283 DBMSrv Command 'auto_update_statistics show' is being executed.
2011-08-31 10:18:31 0x00009ecc INF 419 DBMSrv Command 'auto_update_statistics' has ended with return code 0.
2011-08-31 10:18:41 0x00009ecc INF 283 DBMSrv Command 'backup_save "Backup" DATA RECOVERY' is being executed.
2011-08-31 10:18:42 0x00009ecc INF 1 DBMKnl Sending an administrative statement to the database
0x00009ecc INF 8 DBMKnl Statement: SAVE DATA QUICK TO '
.\pipe\backup' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'Backup'
2011-08-31 10:19:47 0x00009ecc ERR 3 DBMKnl Received the result of an administrative statement from the database
0x00009ecc ERR 9 DBMKnl Statement: SAVE DATA QUICK TO '
.\pipe\backup' PIPE BLOCKSIZE 8 NO CHECKPOINT MEDIANAME 'Backup'
0x00009ecc ERR 10 DBMKnl Returncode: -903
0x00009ecc ERR 5 DBMKnl Errortext: Host file I/O error
2011-08-31 10:19:47 0x00009ecc ERR -24580 DBMSrv ERR_COMMAND_FAILED: Command 'backup_save' has ended and failed with return code -24920.
0x00009ecc ERR -24920 DBMSrv ERR_BACKUPOP: backup operation was unsuccessful
0x00009ecc ERR -24778 DBMSrv The backup tool failed with 2 as sum of exit codes. The database request failed with error -903.
2011-08-31 10:19:53 0x00009ecc INF 2 DBMSrvCo A DBM Server client connection was released (client process has process ID 24352 on computer 10.1.47.21).
2011-08-31 10:19:53 0x00009ecc INF 1 DBMKnl Sending an administrative statement to the database
0x00009ecc INF 8 DBMKnl Statement: SAVE DATA CANCEL
2011-08-31 10:19:53 0x00009ecc ERR 3 DBMKnl Received the result of an administrative statement from the database
0x00009ecc ERR 9 DBMKnl Statement: SAVE DATA CANCEL
0x00009ecc ERR 10 DBMKnl Returncode: -104
0x00009ecc ERR 5 DBMKnl Errortext: DBM command impossible at this time -
My lab has about 10 Mac computers. We all access a central hard drive by the way of wifi provided by AirPort. It's just a regular external hard drive (Seagate Desktop Drive) that I turned into our central storage space by plugging it into AirPort (USB). It works pretty well. We seem to be fine with viewing the file directories, opening files, saving, deleting etc., for a day or two. But then after a day or two, when when trying to modify files or move new files onto the central hard drive, we get the error message: "The operation can’t be completed because an unexpected error occurred (error code -50)"
Any suggestions as to what may be causing this problem?
All of the computers are 2011 iMacs & MacPros. The AirPort is 802.11n WiFi. The hard drive is a Seagate USB 3.0 Desktop Drive.
Thank you for your insight/suggestions.Thanks for your reply. I agree about the communication issue. Let me explain my setup and what I am trying to do and perhaps you can answer my questions or make suggestions.
I have a MAC Mini with a Sony TV for the video monitor. The Mac Mini is hard wired to the AE (Airport Extreme). The AE has a 2 TB HD hooked up to the USB Port. I have a 17" Mac Book Pro on the WIFI Network.
I am trying to use the MAc Mini as a "Media Server" of sorts. Once I get iTunes running the way I plan I am goign to hook up my Apple TV (2nd Generation) to my television downstairs.
What I am trying to accomplish is have iTunes on all my computers look to the External HD on the AE for the files. This is why I am having my (-50 errors).
So far I have noticed that if I go and try to download from iTunes purchased videos that are not ont he computer (to the external HD) it will also occassionaly give me teh -50 error.
Is there a way to change where the files go when I download them? Say I want to download videos to the computer but not to the external HD? However I would want to still be able to move them to the External HD. -
Unexpected Error Occurred (error code -600) after Leopard Installation
Installed Leopard for the second time.
Everything seems to work fine, but after opening and then closing Mail, I'm unable to open it via the dock. Tried to open by selecting from the applications menu, and get the following message:
The operation could not be completed.
An unexpected error occurred (error code -600)
Same thing with Backup, Parallels too.
Shutdown behavior is odd. From the apple icon, shutdown doesn't work, everything goes away on the desktop, then the spinning wheel (not beach ball), then nothing. Have to power off to quit, can't be good for the hardware.
Any suggestions, or am I doomed to a clean install and reinstalling all of my applications? Thankfully I have a drive backed up with SuperDuper with 10.4!
Thanks for the help.OK, I've got ContentBarrier X4 installed and this was the cause of my error codes and it looks like several - if not all of my installation issues with Leopard.
Apparently, perhaps with Login KeyChain update, it wiped out the ContentBarrier administration name, and on launch, it was likely blocking the applications.
First, install the Login KeyChain update (see Apple software download page).
Reinstalled ContentBarrierX4 http://www.intego.com/services/updates.asp (make sure to select ContentBarrierX4).
Open ContentBarrierX4 - you'll have to sign in as the administer. You may have to go into Preferences > Accounts > to make sure that you've got admin rights.
Once you logged in, exit, then reboot.
For the first time since installing Leopard, I can shutdown without a hard power off.
Salvation... -
ichat can't connect to my AIM account, gives me the error "Cannot log in to AIM. General error. Try again." Please help!
HI,
Your specs say OS X 10.6.8 which would be iChat 5.x.x in Snow Leopard.
This version by default tries to login in to the AIM server called login.oscar.aol.com on port 5190 using the TCP protocol.
An internet connection is made up of 65535 of these so called ports (more like TV stations)
Most routers have ports up to port 1024 which means some of the iChat Login Ports are above this.
Two ways to Solve this.
1) Change the Login port iChat uses
2) Change the way the router opens ports.
For 1) go to iChat Menu > Preferences > Accounts
Highlight/select the AIM account.
In the Info Tab deselect the "Enable this Account" to make sure you are Logged out.
In the Server Settings change the Port to 443
You can decide not to use SSL as well if you wish (the server name automatically loses the leading "s")
For 2) log in to the routers set up pages and make sure it is doing UPnP
This allows the computers to tell the router which ports to open. It also allows multiple devices to use the same ports.
For iChat this allows it to Screen Share as this happens on an unlisted random port.
Opps forgot a couple of things.
If you are using an APple ID registed at Apple ending in @mac.com @me.com or @iCloud.com then the passowrd at Apple has to be 16 characters or less to work with the AIM servers.
Additionally the iCloud issued @me.com and @iCloud.com one require you to use iChat 6 in Lion or Messages in Mountian Lion due to changes Apple made to the security of letting AIM "read" the passwords.
9:38 PM Sunday; June 9, 2013
iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro 2Gb (Snow Leopard 10.6.8)
Mac OS X (10.6.8),
Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images." No, Seriously
Message was edited by: Ralph Johns (UK) -
The operation can't be completed. An unexpected error occurred (error code 0).
Yosemite is driving me crazy ....
I have a home network with two iMacs and two TimeCapsules, and my MBP is also in this WLAN network. The TimeCapsules are serving for TimeMashine, one for each of the iMacs. And the MBP is opened for file sharing to allow syncing of data. When I try to mount either the MBP or the TimeCapsule (1 TB with software version 7.6.4, configured to allow/enable file sharing) on the iMac (21,5' Mid 2010, running 10.10.2) I get this error message:
===
The operation can’t be completed.
An unexpected error occurred (error code 0).
===
However, the device is mounted and available. And I can access the files on both "Servers" using the Finder normally.
What is going on?I assume that the flash drive format (from what I´d been reading) most be fat32....not accepting more than 4 gigas...
That would be the problem.
What format does Disk Utility tell you the flash drive is?
Try reformatting the flash drive? -
When copying to NAS, "..an unexpected error occurred (error code -51)"
I'm using Mac OSX 10.6.8 on a macbook pro, copying files to a media NAS server via wifi (n), which I've done countless times before, for about 2 years.
In this last week or so, whenever I copy a file, be it 15 MB or 1.5 GB to the NAS, I've consistently been getting the error:
"The operation can’t be completed because an unexpected error occurred (error code -51)."
There's around 1 TB of free space on the NAS. Windows PCs can copy to it fine. I can still read from it fine, but copying to it is giving me a lot of trouble. I get the error message more often than not, but if I persist in trying to copy it will eventually allow me to copy whichever file I'm trying.
Size of files do no seem to be the issue.
Ive tried a suggested fix of Finder > Preferences > Sidebar > UNTICK Connected Servers ... this has not helped.
I've tried copying using PathFinder as well as Finder, both have the same issue.
I've looked into the Console messages but I'm not really sure what I'm supposed to find (bit of a mac newb for tech issues).
Could really use some help with this.. would be highly appreciative even for some good leads.
Thanks in advance!Hi, see if this helps...
https://discussions.apple.com/message/7605861#7605861 -
Error occurred error code is -180
Adobe CC: When installing .zxp extension in manager for Dreamweaver, I am getting "error occurred error code is -180". Cannot find out what this is? Running Windows 7. Help...PBGVone
Since I just started using CC with extenion manager & Dreamweaver, it is version 7.1.1.32. For some mysterious reason, all the extension appeared; including the ones I was getting errors on. One problem down, next
Taking site created in CS5 Dreamweaver where I use a number of INCLUDES, the includes are not working. FYI...files from CS5 work without issue on hosting server. To solve, I installed AdobeExchange 1.2.0 so I could get my INCLUDES SSI oprion back in CC. Although I see Adobe Exchange in Dreamwever CC, when selected nothing happens; removed; re-installed; same thing. Went directly to Dreamweaver Exchange found "Insert Server Side Include" Veeres 1.0.0; see it in Insert; no luck; still does not recognize. Includes code that worked CS5 is:
<!--#include virtual="/test/INCLUDES/verifications.html" -->
Any thoughts? v
Maybe you are looking for
-
my i tunes id is not working......i try to create new id but it requires my visa card info....what should i do. how can i get my precious id or how can i create new id without giving visa information. i tried but there is no none option in visa card
-
HP deskjet All in one 1510, not scaning
hi I bought Hp deskjet 1510, not scaning showing eror that " hp deskjet 1510 series not available". I instal driver from CD 3 times than download from HP website , but not working. I also install print and scan doctor but nothing working. Is there an
-
Diference between Service tax and GTA service tax
Hi, Kindly tell me what is the difference between service tax and GTA service tax and their accounting entries in SAP ? With Regards, Samrat
-
HowTO: convert Image- byte[] when don't know image format?
I have byte[] field in my DB. Images have been stored there. Images can be jpg/gif/png. My task is to scale them and save back (to another field) I have such code: I know, that getScaledInstance is bad, but please, don't pay attention. This operation
-
Ever since upgrading to 2.01, I've noticed that when an email is detected, the phone only vibrates and fails to sound the usual tone, though in settings tone is on, as is vibrate. Anyone have any fixes, please?