"an error has occured" while downloading OS X Mountain Lion

I have purchased the OS X Mountain Lion and it downloaded about half way on my macbook then stopped. Now when i go into the app store under purchased it says "an error has occured" and there is no option to resume the download, how can i get it to download again?

Try this one. There is some troubleshooting information and a link to contact them.
App Store Support
This has worked for some people.
- Sign out of the App Store (in the Store menu)
- Quit the App Store
- In Finder - Go>Go to folder...  (or Apple-shift-G)
- Paste in the following "~/Library/Caches/ "
- It will take you to a folder.  Delete com.apple.appstore
- Launch the App Store.  Sign in and then reclick the Mountain Lion buy.  It won't charge you again.

Similar Messages

  • An Error Has Occurred when downloading OS X Mountain Lion

    It has repeatedly occured over the past month, the download gets to around 51MB says calculating and after a while returns in red writing 'an error has occured'
    Any suggestions as to a solution..?

    Do you have at least 6GB free on your Hard drive?

  • 10.3 OS Upgrade error. An error has occurred while downloading software for your device. Please verify your internet connection or try again later

    HELP ! HELP ! HELP ! "An error has occurred while downloading software for your device. Please verify your internet connection or try again later, if the problem persists." appears while attempting to upgrade or install BlackBerry Device Software. upgrading my Z10 OS to 10.3 on both (link & web). but facing same problem again and again. plz help. internet speed is 1mbps and working fine.

    I suggest you try the very clean and very forceful AutoLoader method:
    http://supportforums.blackberry.com/t5/BlackBerry-10-OS-Device-Software/Upgrading-OS10-devices-using...
    Beware that it is completely destructive...the device will be "like new"...no data, no apps, no accounts, etc. Be sure you take a full backup first, as well as make full manual documentation of all apps, accounts, configurations, etc. Sometimes a restore reintroduces the very corruption one is trying to eliminate, and manual reconfiguration is necessary.
    You can also use this to fall back to a prior OS if you desire...you can install any OS level for which you can find an AutoLoader. (Hint...search over on the CB site!)
    Good luck and let us know!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Wont update message displays: An error has occured while downloading software .......

    please help!!
     Iam trying to update my playbook 16GB but each time i accept and try to apply the update i get a pop up in middle of screen saying:
    An error has occured while downloading software for your device. Please verify your internet connection or try again later, if the problem persists.
    now this is driving me insane no matter what i try it doesnt seem to manage to get past this step of the update!!
    Has anybody got ANY tips or advice please!!  

    Without knowing if you have received an update before it's difficult to be sure. The last update was feb 2013 so don't know why you need an update, unless it's a wipe or a repair.
    Lets assume you live in the "western world" then try a friend's house or a free wifi spot to do the update. it's easy for playbook to get upset with router wifi settings.  
    Sarah.

  • HT4463 "An error has occurred" while downloading software on appstore

    I have been attempting to resume a download. I received the (unhelpful) message that "an error has occurred" and once I attempted to download it again the install/download button went blank and unresponsive. I've tried opening the debug menu and removing the files from the dowload folder and starting again and I get the same problem again.

    Give it a week, there's been server issues for that long.

  • Why do I get the message "an error has occured while downloading the updates (102)" and what do I do now?

    What can I do to get around the problem regarding the downloading of the upgrade to iTunes?  I get a message "an error has occured........."

    Try installing the standalone version from Apple's website. What happens?
    Apple - Support - iTunes - Install & Update

  • HT202159 Error has occurred while downloading Mountain Lion

    An error has occurred and the button can not be clicked so I can't resume or restart download.
    btw got the free download because my mac is new.

    ok I solved it myself somehow.
    1 open App Store
    2 Sign in
    3 Go to quick links>account
    4 Unhhide Mountain Lion
    5 Sign out
    6 Sign it
    7 Go to purchase tab
    8 Mountain Lion has now an option to resume download.
    This worked for me.
    Good luck

  • "an error has occured" while downloading a film from the store but has still charged me, if I try to download the same film again it tells me that I have downloaded it, any help would be welcome.

    Don't know why an error occured, but it has? any one know how I can can my purchase money redeemed,
    so that I may download again...thanks

    Hello there, Aruna Patel.
    The following Knowledge Base article should provide the information you need to help resolve your issue:
    Apple ID: 'This Apple ID has been disabled for security reasons' alert appears
    http://support.apple.com/kb/ts2446
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro D.

  • An error has occured while downloading Mountain lion from app store

    Since apple denied my purchsed proof, I don't really know what is going on? Maybe I claimed the copy late, I am ok with it then I puchased from App Store, but download failed? I keep trying on whatever solution here but not working at all, can anyone help?

    Contact with iTunes support > http://www.apple.com/support/mac/app-store/contact
    Message was edited by: mende1

  • While downloading OS X Update Combined 10.8.5 i get a message saying "an error has occurred while downloading the updates. (102)

    I am first time mac user but quiet tech savi can some one help me fix this error

    Welcome to Apple Support Communities
    Install the 10.8.5 Combo from the Apple site > http://support.apple.com/kb/DL1676

  • Crystal reports 2008 sp3 : An error has occurred while attempting to load t

    Hello,
    Please forgive me for posting in the CR .NET forum because we are using the full Crystal Reports 2008 product and I did not see a category for it.  If there is a better forum for this question, please let me know or feel free to move it.
    We are having trouble deploying our crystal reports 2008 reports to a Windows Server 2008 R2 server in an aspx application...
    I have been working on this issue for 4-days and cannot seem to make any progress, so I would really appreciate your help.
    Our Environment:
    Development Computer (32-bit, WinXP)
      VS2008 (fully updated, was not installed with its Crystal Reports feature)
      Crystal Reports 2008 SP3 (downloaded and installed "cr2008_sp3_fullbuild")
    Database Server (64-bit)
      "SERVER2" is a Microsoft SQL Server 2008 server, fully updated
    Web Server (64-bit)
      "SERVER3" is a Microsoft Server 2008 R2 Web server.
    We have an application that is installed on the Web server and it pulls data from the database server.
    The webpages are accessing the database properly.  There is a ShowReport.aspx webpage that has the
    CrystalReportsViewer on it.  We send parameters and logon information to ShowReport.aspx.  ShowReport
    works properly on our development computer and the report looks good, but it fails on the web server.
    We downloaded CRRuntime_12_3_mlb.msi (X86) from SAP/CR and installed it on the web server without any issues.
    Our application pool on the web server for this application is set to 32-bit mode.  When I launch the
    application, it works properly with the database and displays data on web pages, but when I try to
    view a report on ShowReport, I get the following error message:
    An error has occurred while attempting to load the Crystal Reports runtime.
    Either the Crystal Reports registry key permissions are insufficient or the Crystal Reports runtime is not installed correctly.
    Please install the appropriate Crystal Reports redistributable (CRRedist*.msi) that contains the version of the Crystal Reports runtime (x86, x64, or Itanium)  that is required.
    According to everything that I have read, I have properly matched the DLLs: On the development computer, "cr2008_sp3_fullbuild" was installed; On
    the web server, "CRRuntime_12_3_mlb.msi (X86)" was installed.  They are both Crystal Reports 2008 and not .NET.  CR.NET was not installed on our development computer, so our application was built with full Crystal Reports 2008 SP3.  On our development computer, .ENGINE is 12.0.2000.0 and
    the same version is on the web server.
    So, I am completely at a loss as to why we are encountering this error.  Help, Please!!!
    Thank you in advance,
    Mike

    Hi Mike,
    Did you set your project for X86 mode only? If not do so and rebuild and deploy your app.
    Thank you
    Don

  • An error has occurred while accessing SQL database or system resources. If this is the first time you have seen this message, please try again later. If this problem persists, please contact your administrator.

    I have SP Server 2010, and when I try to DELETE a rule within an existing Audience, "Property (Account Name) = domain/username", I get this error, "An error has occurred while accessing SQL database or system resources. If this
    is the first time you have seen this message, please try again later. If this
    problem persists, please contact your administrator."  When I try to "MODIFY" the rule I get this error, "One or more values typed on this page are not valid. Check the text for the indicated fields." 
    The last time I checked it was working, I'm not aware of any new updates installed recently?  I did a full Profile Synchronization as well, but still not working, please advise? -- Evenstarline

    Hi Sara,
    First of all thank you very much for your prompt responses. Here are my comments to each of your suggestions below, and just to let you know I am using a Farm Admin account.  I
    was able to do this way after we upgraded from SP 2007 to SP 2010 as well.   I would like to mention I'm not a SP expert, just been given the responsibility due to another person handling it just left, so apologize with some of
    my novice questions below?
    1. When I change the Operators to "Contains" or "Not Contains" get generates this error below.
         Error generating in red towards top of the audience page..."One or more values typed on this page are not valid.  Check the text for the indicated fields."
         Error occurred where you enter your "Value"..."Could not resolve the user identity. Please re-enter the account name."
    2. We have a 3-server-tier topology (SPWeb, SPDB, and SPFarm).  Does the updates only apply to where the Central Admin is installed, which is the "SPFarm"?  I checked all
    3 servers, and NONE of the updates (KB2899494, KB2889845, and KB2883055) you'd mentioned are installed.
    3. I'm new to IISRET, I need to be extra cautious of what I run in production, is this safe to run with no problem?  What does it do?  And How do I run it?
    4. I'm also new to viewing the ULS log.  I'd just downloaded a viewer for it.  I'm assuming the only logs I need to be concern with viewing are within the SPAdmin (where Central
    Admin is installed)?  There's so many of them, what should I be looking for exactly?
    Evenstarline 

  • An error has occurred while erasing your restore destination disk

    MacBook Pro, mid-2010 15-inch; OS X Mavericks (10.9.4); originally shipped with Snow Leopard.
    My MBP has crashed & won't start beyond the grey screen and spinning wheel. System restore from Time Machine backup won't work. I tried all these without success
    Safe mode (hold Shift during power-up)
    Verbose safe mode (hold Shift + Command + V during power-up) which reports
               ** /dev/rdisk0s2 (NO WRITE)
                   ** Root file system
                        Executing fsck_hfs (version hfs-226.1.1).
                   disk0s2: I/O error
              ...followed by some other stuff I haven't transcribed before it grinds to a halt
    Reset NVRAM (hold Option + Command + P + R during power-up)
    I can boot up ok into the Recovery partition (hold Command + R during power-up) to run Disk Utility and Time Machine.
    I can’t start from the OS X Install disk (hold C during power-up) cos my DVD drive spits out all CDs and DVDs after spinning them up. This despite cleaning with compressed air.  Tried to run AHT, the Apple Hardware Test (hold D during power-up): nada. Also running AHT from the internet - (hold Option + D during power-up), still nothing.
    I’ve verified my hard disk (all appears ok) and run Repair Disk Permissions.  This reports some problems, for example:
            Permissions differ on “System/Library/CoreServices/Feedback Assistant.app”; should be drwxr-xr-x ; they are lrwxr-xr-x .
              Unable to set owner and group ; error 22: Invalid argument
              Unable to set permissions ; error 22: Invalid argument
    Same problem (but with various different permissions) for
              “usr/lib/libruby.2.0.dylib”
              “usr/lib/libruby.dylib”
              “Applications/Safari.app/Contents/Resources/Safari.help/Contents/Resources/inde x.html”
    Also have lots where as well as unable to set owner, group and permissions the
              Group differs; should be 80; group is 0.
    Affected items are
              “Library/Printers”
              “Library/Printers/Icons”
              “Library/Printers/InstalledPrinters.plist”
    and a few dozen more for various items in subfolders of “Applications/iBooks.app/Contents”
    I don’t know if they’re linked with my problem or an irrelevant side-issue.  I don’t understand the ramifications of these wrong permissions that Disk Utility can’t repair.  And I don’t have the headspace or time to learn now either.
    I repeatedly tried system restore from Time Machine backup, but get the error:
              An error has occurred while erasing your restore destination disk.  Restart your computer and then try restoring again.
    I tried erasing the hard disk partition with Disk Utility but got the error
              Volume erase failed with error couldn't unmount disk.
    Now totally out of ideas.  Have I overlooked anything?  Is my hard drive a goner?  BTW my battery is also saying "Replace soon", but I don't know if that's relevant.  All help gratefully appreciated!

    There are several ways to back up a Mac that is not fully functional. You need an external hard drive or other storage device to hold the data.
    1. Start up from the Recovery partition, from Internet Recovery, or from a local Time Machine backup volume (option key at startup.) Launch Disk Utility and follow the instructions in this support article, under “Instructions for backing up to an external hard disk via Disk Utility.” The article refers to starting up from a DVD, but the procedure in Recovery mode is the same. You don't need a DVD if you're running OS X 10.7 or later.
    2. If Method 1 fails because of disk errors, then you may be able to salvage some of your files by copying them in the Finder. If you already have an external drive with OS X installed, start up from it. Otherwise, if you have Internet access, follow the instructions on this page to prepare the external drive and install OS X on it. You'll use the Recovery installer, rather than downloading it from the App Store.
    3. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, start the non-working Mac in target disk mode. Use the working Mac to copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    4. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • An error has occurred while exporting the folio

    An error has occurred while exporting the folio.
    Failed to download the folio to your local disk.
    Keep getting this error.. any suggestions?
    Edit: it's working all of a sudden...

    After several tries it worked...

  • An error has occurred while updating article layouts. The InDesign file for the layout cannot be...

    When trying to complete the tutorial for indesign I get the following error when trying to add an article to my folio:
    "An error has occurred while updating article layouts. The InDesign file for the layout cannot be found."
    I am able to create the folio then I click into articles. My document "WiFi_v.indd" is open when clicking add article, but I keep getting this error message.
    I am using the following versions of the software (Should be the latest).
    - Folio Builder (Downloaded version Version 1.1.8.0)
    reported version:
    11.4.3.20111129_m672305 7.5.5.17
    Adobe In Design 7.5.2 CS 5.5
    Also tried reinstalling the plugins (uninstall + install)

    If you're on Mac OS with the OS in another language than english the "User" folder might contain a non english character and causing problems.
    I e in Sweden the Mac OS user-folder is called "Användare". When attempting uploading articles from a file locaded anywere this "Användare" is in the file path the Folio producer says Error finding InDesign layout, due to -what i think is-the "ä" in Användare. If you still want to work local you can place the InDesign files directly into the Macintosh HD. In this case the User folder is not used.
    BR
    Henrik

Maybe you are looking for