An exception was caught while scheduling the publication. (FBE60203)
Hi All,
Iam getting below error when am using publication to send doc to personal email.
Please advice me to find out the solution, thanks in adavance...
Error Message:
ERROR [PublishingService:HandlerPool-124] BusinessObjects_PublicationAdminLog_Instance_177746 - [Publication ID # 177746] - An exception was caught while scheduling the publication. (FBE60203)
com.crystaldecisions.sdk.occa.infostore.internal.InfoStoreException: Sorry, you do not have the right to 'Edit objects' (ID: 6) for 'ScopeBatch177754' (ID: 177754). Please contact your administrator if you require this right.
cause:com.crystaldecisions.enterprise.ocaframework.idl.OCA.oca_abuse: IDL:img.seagatesoftware.com/OCA/oca_abuse:3.2
detail:Sorry, you do not have the right to 'Edit objects' (ID: 6) for 'ScopeBatch177754' (ID: 177754). Please contact your administrator if you require this right.
Hi,
This error messgae occurs when the 'Edit Objects' right is missing for the published reports.
These are the rights required to schedule a publication :
1. Login to CMC with Enterprise Administrative account
2. Navigate to Users and Groups >> Top-level security >> All Users
3. Add the required group/user facing the issue > Advanced > Add/Remove rights > General
4. Grant View objects and Subscribe to objects
5. Navigate to the folder where publication is there > User Security
6. Add/Remove Rights > At General level grant following rights:
- Schedule on behalf of other users
- Modify the rights users have to objects
- Edit objects
- Copy objects to another folder
- Schedule document to run
- Schedule to destinations
Regards,
Yosra
Similar Messages
-
Hi All,
An exception was thrown while processing Submit Tasks Domain\"SDK Account" does not have sufficient permission to perform the operation.
am getting this error when try to enable audit in one of Domain controllers.Dear Mark,
i face similar problem before, i had resolve it be adding SDK service account to Operation Manager Administration group.
Regards, Ibrahim Hamdy -
Hi All,
My environment details:
SCSM 2012 R2
SCCM 2012 R2 connector configured
When I looked into the event viewer , I find the following error occurring continuously while the SCCM 2012 synchronization
Error Event 26319
An exception was thrown while processing ProcessDiscoveryData for session ID uuid:xxxxx
Exception message: The relationship source specified in the discovery data item is not valid.
Relationship source ID: xxxx
Rule ID: xxxxxx
Full Exception: Microsoft.EnterpriseManagement.Common.DiscoveryDataInvalidRelationshipSourceException: The relationship source specified in the discovery data item is not valid.
This error is accompanied by the below warning
Event:34113
Connector SCCM Connector -Primary Site
Error writing changes to entity of type Microsoft.Windows.Peripheral.LogicalDisk with DisplayName XXXXXXX
Message: The relationship source specified in the discovery data item is not valid.
Relationship source ID: XXXXXXX
Rule ID: XXXXXXX
If this error occurs with every synchronization, examine view Cached_CMv5_LogicalDisks for correctness or the schema for type Microsoft.Windows.Peripheral.LogicalDisk in management pack Microsoft.Windows.Peripheral.Library.
Event:33333
Data Access Layer rejected retry on SqlError:
Request: p_RelationshipDiscovered -- (RelationshipId=f449d88a-ecbf-5b16-40be-c085391a6380), (SourceEntityId=ccdf084d-254f-0ad4-ba2e-189b75ff109a), (TargetEntityId=07734206-0880-a4ec-a638-df20ccbdcbaf), (RelationshipTypeId=e4c6f8ce-0763-51c6-6421-c424a93a1eb6),
(DiscoverySourceId=df6eae9f-f14f-4e6e-9f3c-c1effa193fbe), (HealthServiceEntityId=34b1c704-120c-1175-9fe3-411e2c0aac30), (PerformHealthServiceCheck=False), (TimeGenerated=09/01/2015 04:15:26), (SourceEntityLastModified=), (IsRelationshipAlreadyDiscovered=False),
(RelationshipInserted=False), (LastModified=), (ChangeId=), (RETURN_VALUE=1)
Class: 16
Number: 777980002
Message: The specified relationship doesn't have a valid source.
From the events, it is clear that the problem is with SCCM connector and in the warning it mention to check the management pack ,
Microsoft.Windows.Peripheral.Library
whether need to update any MP ??
I tried to resolve this, but ended up in aforum which suggested to do a restart of server .But since it is Prod , restart will not be easy.
If any suggestions , it will be good to resolve this
Thank youHi,
Please install UR3 and check the result:
Update Rollup 3 for System Center 2012 R2 Service Manager
http://support.microsoft.com/kb/2962041
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Error while scheduling the report in bi publisher
oracle.apps.xdo.servlet.scheduler.ProcessingException: Error occurred while scheduling the job.
at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.getDateObject(SchedulerServlet.java:2202)
at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.scheduleJob(SchedulerServlet.java:1394)
at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.doPost(SchedulerServlet.java:289)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:80)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:302)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:190)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at oracle.oc4j.network.ServerSocketAcceptHandler.procClientSocket(ServerSocketAcceptHandler.java:239)
at oracle.oc4j.network.ServerSocketAcceptHandler.access$700(ServerSocketAcceptHandler.java:34)
at oracle.oc4j.network.ServerSocketAcceptHandler$AcceptHandlerHorse.run(ServerSocketAcceptHandler.java:880)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)Hi,
I am newly using BI publisher . I am using 10.1.3.4.0 . I am just trying to create a report in test name. that is the first step to create a report where i am getting error. I am using default RPD paint , where all the user and Groups are defined . -
Experts,
Please help me out here,Am facing this issue while scheduling a job in BIPublisher.
job submission failed : error occurred while scheduling the job. org.quartz.objectalreadyexistsexception: unable to store job with name
Thanks,You are probably installing on a hardened machine.
The "installation guide" says that if you are doing so, you need to create a file named libx11.so.4 and update your LD_LIBRARY_PATH (see http://docs.iplanet.com/docs/manuals/messaging/ims52/ig/unix/overview.htm)but:
1- the library name is libX11.so.4 and
2- for jre a common file is not enough, you need to install SUNWxwplt at least. This will install the library on /usr/openwin/lib.
You can check the results running <server-root>/bin/base/jre/bin/jre
Hope that helps and sorry about my poor english. -
Error occurred while scheduling the job.
Hi Tim,
I am getting following error when ever I use any other option than 'Run Immediately' I am getting following error.
Please help me.
oracle.apps.xdo.servlet.scheduler.ProcessingException: Error occurred while scheduling the job.
at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.getDateObject(SchedulerServlet.java:2202)
at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.scheduleJob(SchedulerServlet.java:1603)
at oracle.apps.xdo.servlet.ui.scheduler.SchedulerServlet.doPost(SchedulerServlet.java:289)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
at oracle.apps.xdo.servlet.security.SecurityFilter.doFilter(SecurityFilter.java:80)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:368)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:866)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:448)
at com.evermind.server.http.HttpRequestHandler.serveOneRequest(HttpRequestHandler.java:216)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:117)
at com.evermind.server.http.HttpRequestHandler.run(HttpRequestHandler.java:110)
at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:595)
Thanks,
VaraHi Vara
You have the scheduler set up now right? Can you schedule for the future ? Im assuming not but worth asking :)
Are there any other errors in the stack. Upon starting the server does the Quartz piece initialize OK - you'll see it when starting the j2ee container
Regards
Tim
http://blogs.oracle.com/xmlpublisher -
List of values apprear for email alert while scheduling the report
List of values apprear for email alert while scheduling the report
Hi,
Can you please expand on your issue?
Cheryl -
RWI 00200 Error while scheduling the Bex Query based Webi report
Dear All,
I am facing the below error while scheduling the Bex Query based Webi report.
Error:RWI 00200
We are using BO XI 4.0 Sp05.
Please adviseHi,
I am on BO 4.0 SP05 Patch 6. Webi reports are just showing processing but not giving results. When I try to create new report it is throwing java security error.
Tried applet patch upgrade(From link : https://websmp207.sap-ag.de/~sapidb/011000358700000902752013E) for webi certificate but didn't help.
Please suggest what could be done.
Thanks and Regards,
Ankit Sharma -
Error message while opening a project: "an error was encountered while loading the image"
We've run into a new error message here today:
an error was encountered while loading the image
It appears when we try to load a recorded project. It occurs on both the cp-file and the backup file.
It's on a windows 7-machine.
Anyone encountered it and knows what it means?
is the project lost forever?Hi there
Hmmm, it may be related to Windows 7, but let's check the obvious stuff first.
Where exactly is th project if you locate it using Windows Explorer? Is it found on your local C drive or is it found on a network drive?
If it's on a network drive, please note that Captivate has never worked well with projects being edited while they are on network resources. So the first step in this case (assuming that's where the project is) would be to move the project file off the network and onto the local C drive. Then try opening again.
Assuming the project isn't on a network, all still may not be lost. The next thing to try would be to create a new blank project sized identically to the one that seems to have gone south. Then click File > Import > Slides/Objects and see if you can import the content from the errant project into the new.
And if those steps fail, it's likely time to restart from scratch. But depending on what you have done so far and how you have done it, you might be able to salvage some of it by playing back the content (assuming you have published it during testing) and record what you are playing back with Captivate.
Best of luck to you in sorting things. You should also consider filing a Bug Report.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks -
I upgraded to iOS 5 on my 3GS without any issues but now everytime I connect to iTunes the message ' iTunes was interrupted while restoring the contents of the iPhone. would you like to restore the phone again now? with the options of cancel, continue restore and delete back-up. what happens if i click delete back up?
I'm not getting the message anymore!
What I did:
1.- Went to preferences in itunes/ Devices --> erased the corrupted backup (there were two backups)
2.- Upgraded to iOS 5.0.1
Done!
PS: Maybe upgrading solves the problem without erasing the corrupted backup -
Error message "update was terminated" while cancelling the billing documen
Hi Experts,
Kindly can you advise on the following issue. We are getting the error message "update was terminated" while cancelling the billing document using transaction code VF11.
Note: The accounting document associated with the billing document is not posted and also note that we have done a check with the Basis team who has confirmed back stating they are seeing the udpate error for the user " ". The log says that the update was terminated because the user was trying to enter some duplicate records into the database.
We could observe that the cancellation document is not created and also we have confirmed with the FI that they still continue to have the billing document open in the customer balance statementu2026
Thanks for your help,
MithunHI Mithun ,
Check if that billing document is there in VFX3 . If it is there then try to clear it from there and then try to reverse it.
Hopefully it will be done.
Regards,
Nikhil -
The exception 'CX_RSR_X_MESSAGE' was raised while loading the data
Hello SDNERS,
I am lworking in PA module, I have loaded the master data successfully, while loading th transaction data in 0PA_C01, it is taking too much time, when i debgug I am getting below Exception :-
The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
along
the call hierarchy.
Since exceptions represent error situations and this error was not
adequately responded to, the running ABAP program 'SAPLRRMS' has to be
terminated.
Kindly suggest.
Thanks
ShaliniHi Shalini
I have the same problem.
Note 1157796 apply for SAP BI release 700 and 710 only . what do you use SAP BI Release?
I install BI Release 701, so i solve the problem not yet.
Please help me the solution for this error.
Thanks -
BO 4.0 : JCoException while scheduling the webi report
Hi,
We are in BO 4.2 patch 8.
We have 35 webi reports. These report uses SAP BW as data source. We are using DF to fetch data from SAP BW.
We have manually configured the RFC destination for JCO connection (as mentioned in SAP notes - 1638647).
Reports are getting scheduled successfully. But sometimes some webi reports fails with the following error message.
Database error: (CS) "Java Exception : java.lang.RuntimeException:com.sap.connectivity.cs.java.drivers.DBDError: [Data Federator Driver][Server] [Connector 'Sales_BO_New'] SAP NetWeaver BW has reported an exception: com.sap.conn.jco.JCoException: (112) RFC_ERROR_REQUEST_CANCELLED: connection with handle 3 closed
after cancel (remote system is PBI|BILPBI)" . (IES 10901)
This is in intermittent issue. If anybody faced this issue, then please let me know your feedback.
Thanks,
Ravi
Edited by: Ravi Kirana Palla on Dec 9, 2011 7:38 AM
Edited by: Ravi Kirana Palla on Dec 9, 2011 7:38 AMHi,
Personally, I haven't seen this before. To recap:
- Manual refresh work fine
- scheduling works most of the time
- but sometimes it fails with << SAP NetWeaver BW has reported an exception: com.sap.conn.jco.JCoException: (112) RFC_ERROR_REQUEST_CANCELLED >>
You might want see if you can isolate a particular document causing the problem, or determine if it's related to using certain refresh parameters
According to http://help.sap.com/saphelp_nw70/helpdata/de/f6/daea401675752ae10000000a155106/content.htm
it says Find out from the JAVA application or the JCo traces which JCo Server was cancelled and restart the server; in the J2EE Application Server context, JCo Servers are often started via the Service JCo RFC Provider
but .. i don't know how helpful that is..
Best of luck
H -
Hi
I got the following exceptions while testing the XSLT mapping scenario...
Hi
I have created a XSLT mapping with java conjunction... i have created a ZIP file and i have palced java class file, java file and xsl file in that ZIP file... I have imported this archive into imported archives... but when i am testing the application i got the follwoing exceptions
<b>Details
com.sap.engine.services.ejb.exceptions.BaseRemoteException:
Exception in method transform.
at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.transform(MapServiceRemoteObjectImpl0.java:182)
at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0p4_Skel.dispatch(MapServiceRemoteObjectImpl0p4_Skel.java:104)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native
Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.UnsupportedClassVersionError:
DATEandTIME/Date_Time (Unsupported major.minor version
49.0)
at java.lang.ClassLoader.defineClass0(Native
Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at java.lang.ClassLoader.defineClass(ClassLoader.java:448)
at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingLoader.findClass(RepMappingLoader.java:175)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at com.sap.engine.lib.xsl.xpath.JLBLibrary.<init>(JLBLibrary.java:33)
at com.sap.engine.lib.xsl.xpath.LibraryManager.getFunction(LibraryManager.java:69)
at com.sap.engine.lib.xsl.xpath.functions.XFFunctionAvailable.execute(XFFunctionAvailable.java:24)
at com.sap.engine.lib.xsl.xpath.ETFunction.evaluate(ETFunction.java:110)
at com.sap.engine.lib.xsl.xpath.XPathProcessor.innerProcess(XPathProcessor.java:54)
at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:41)
at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:49)
at com.sap.engine.lib.xsl.xslt.XSLIf.process(XSLIf.java:28)
at com.sap.engine.lib.xsl.xslt.XSLNode.processFromFirst(XSLNode.java:293)
at com.sap.engine.lib.xsl.xslt.XSLElement.process(XSLElement.java:248)
at com.sap.engine.lib.xsl.xslt.XSLNode.processFromFirst(XSLNode.java:293)
at com.sap.engine.lib.xsl.xslt.XSLElement.process(XSLElement.java:248)
at com.sap.engine.lib.xsl.xslt.XSLNode.processFromFirst(XSLNode.java:293)
at com.sap.engine.lib.xsl.xslt.XSLTemplate.process(XSLTemplate.java:272)
at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:457)
at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:391)
at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:392)
at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:234)
at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingTransformer.transform(RepMappingTransformer.java:150)
at com.sap.aii.ibrep.server.mapping.ibrun.RepXSLTMapping.execute(RepXSLTMapping.java:81)
at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80)
at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107)
at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127)
at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104)
at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40)
at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.transform(MapServiceRemoteObjectImpl0.java:131)
... 10 more
; nested exception is:
java.lang.UnsupportedClassVersionError:
DATEandTIME/Date_Time (Unsupported major.minor version
49.0)
com.sap.engine.services.ejb.exceptions.BaseRemoteException:
Exception in method transform.
at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.transform(MapServiceRemoteObjectImpl0.java:182)
at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0p4_Skel.dispatch(MapServiceRemoteObjectImpl0p4_Skel.java:104)
at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:304)
at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:193)
at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:122)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native
Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Caused by: java.lang.UnsupportedClassVersionError:
DATEandTIME/Date_Time (Unsupported major.minor version
49.0)
at java.lang.ClassLoader.defineClass0(Native
Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
at java.lang.ClassLoader.defineClass(ClassLoader.java:448)
at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingLoader.findClass(RepMappingLoader.java:175)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at com.sap.engine.lib.xsl.xpath.JLBLibrary.<init>(JLBLibrary.java:33)
at com.sap.engine.lib.xsl.xpath.LibraryManager.getFunction(LibraryManager.java:69)
at com.sap.engine.lib.xsl.xpath.functions.XFFunctionAvailable.execute(XFFunctionAvailable.java:24)
at com.sap.engine.lib.xsl.xpath.ETFunction.evaluate(ETFunction.java:110)
at com.sap.engine.lib.xsl.xpath.XPathProcessor.innerProcess(XPathProcessor.java:54)
at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:41)
at com.sap.engine.lib.xsl.xpath.XPathProcessor.process(XPathProcessor.java:49)
at com.sap.engine.lib.xsl.xslt.XSLIf.process(XSLIf.java:28)
at com.sap.engine.lib.xsl.xslt.XSLNode.processFromFirst(XSLNode.java:293)
at com.sap.engine.lib.xsl.xslt.XSLElement.process(XSLElement.java:248)
at com.sap.engine.lib.xsl.xslt.XSLNode.processFromFirst(XSLNode.java:293)
at com.sap.engine.lib.xsl.xslt.XSLElement.process(XSLElement.java:248)
at com.sap.engine.lib.xsl.xslt.XSLNode.processFromFirst(XSLNode.java:293)
at com.sap.engine.lib.xsl.xslt.XSLTemplate.process(XSLTemplate.java:272)
at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:457)
at com.sap.engine.lib.xsl.xslt.XSLStylesheet.process(XSLStylesheet.java:391)
at com.sap.engine.lib.jaxp.TransformerImpl.transformWithStylesheet(TransformerImpl.java:392)
at com.sap.engine.lib.jaxp.TransformerImpl.transform(TransformerImpl.java:234)
at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingTransformer.transform(RepMappingTransformer.java:150)
at com.sap.aii.ibrep.server.mapping.ibrun.RepXSLTMapping.execute(RepXSLTMapping.java:81)
at com.sap.aii.ibrep.server.mapping.ibrun.RepMappingHandler.run(RepMappingHandler.java:80)
at com.sap.aii.ibrep.server.mapping.rt.MappingHandlerAdapter.run(MappingHandlerAdapter.java:107)
at com.sap.aii.ibrep.server.mapping.ServerMapService.transformInterfaceMapping(ServerMapService.java:127)
at com.sap.aii.ibrep.server.mapping.ServerMapService.transform(ServerMapService.java:104)
at com.sap.aii.ibrep.sbeans.mapping.MapServiceBean.transform(MapServiceBean.java:40)
at com.sap.aii.ibrep.sbeans.mapping.MapServiceRemoteObjectImpl0.transform(MapServiceRemoteObjectImpl0.java:131)
... 10 more
; nested exception is:
java.lang.UnsupportedClassVersionError:
DATEandTIME/Date_Time (Unsupported major.minor version
49.0)</b>
Please help me....
Best Regards
Ravi Shankar B
Message was edited by: RaviShankar BHi
Following is my XSLT code
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="2.0"
xmlns:xsl="http://www.w3.org/1999/XSL/Transform"
xmlns:javamap="java:DATEandTIME.Date_Time">
<xsl:output method="xml" version="1.0" encoding="UTF-8" indent="yes"/>
<xsl:param name="inputparam" />
<xsl:template match="/">
<MT_TARGET>
<date>
<xsl:if test="function-available('javamap:getDateValue')">
<xsl:value-of select="javamap:getDateValue($inputparam)"/> </xsl:if>
</date>
<time>
<xsl:if test="function-available('javamap:getTimeValue')">
<xsl:value-of select="javamap:getTimeValue($inputparam)"/> <xsl:value-of select="$test"/>
</xsl:if>
</time>
<project>
<xsl:value-of select= "//project"/>
</project>
</MT_TARGET>
</xsl:template>
</xsl:stylesheet>
Following is my Java Code
package DATEandTIME;
import java.util.Map;
import com.sap.aii.mapping.api.AbstractTrace;
import com.sap.aii.mapping.api.StreamTransformationConstants;
import java.util.*;
import java.text.*;
public class Date_Time {
private static AbstractTrace trace = null;
public static String getDateValue(Map inputparam)
trace = (AbstractTrace)inputparam.get(
StreamTransformationConstants.MAPPING_TRACE );
Date now1 = new Date();
SimpleDateFormat formatter = new SimpleDateFormat ("yyyyMMd");
String dateString = formatter.format(now1);
return dateString;
public static String getTimeValue(Map inputparam)
trace = (AbstractTrace)inputparam.get(
StreamTransformationConstants.MAPPING_TRACE );
Date now1 = new Date();
SimpleDateFormat formatter = new SimpleDateFormat ("hhmmss");
String dateString1 = formatter.format(now1);
return dateString1;
Best Regards
Ravi Shankar B -
BI Publisher: Issue while scheduling the report/query to be executed daily
Hi,
We are using Oracle Business Intelligence 11.1.1.6.3 and while we schedule a report(RTF Template) we are facing issue.We use bursting query and when we select option to execute immediately it runs fine and sends notifications,it also executes when we schedule it to run Once but fails when i schedule the report to be executed DAILY .hii
The query does not includes any RKF, CKF any complex calculations. as I said before also query is based on MP which is designed on a single Cube. There are no such navigational Attributes used for selection, Number of records are not more than 300 on that particular selection parameter
there is only one info object which is creating issue & it is a master info object. If i am restricting this info object in the query & then executes the query , it gives the error msg also i put a variable for input parameter, & there I restrict the value, then also query executes with an error msg
But if query is not restricted with any value for that info object then query executes with in a second.
Thanks
neha
Maybe you are looking for
-
How to find enhancement point or enhancement section
Hi, If anybody is trying to make changes to the approved sale order it shows a message "SALE ORDER APPROVED BY xx CHANGES NOT POSSIBLE". i want to know where excatly the enhacement code is w
-
Windows 8.1 randomly freezes and restarts on Dell Venue Pro 11
I have a new Dell Venue Pro 11 with Windows 8.1. It freezes at random times -- on random processes (music, firefox, etc.) -- goes to the BSOD and into a restart. Happens a few random times-- a day; no pattern. Looking through the answers to related
-
I've just noticed that the quality of the TOC icons on my app look poor. Lots of jpg compression artifacts. This is on an iPad2 using the new IOS7 update. The TOC icons were created 70px x 70px. If they look bad on standard display they must look ter
-
Hi All, I have following table which has reciprocal records as well as non reciprocal such as relid = 3. How can I find the record with relid = 3? relid relrelatid whois whose 1 10 emp mngr 10 1 mngr emp 2 20 emp mngr 20 2 mngr emp 3 30 emp mngr Than
-
Hello, Unable to install Logic 8 (with license) on a Imac 2.4 ghz Core 2 Duo! Error message during installation, "contact the software vendor for assistance". I had already installed this version of Logic on another computer. Any idea before I call A