Animation Stops Briefly

Hi. On rollOver a button it tells an MC to play. This MC has
a sound on a layer. However on(rollOver) the button it takes a
while to play the MC with sound when it should be immediate. Why
does this happen and how can it be fixed?

I'm having this problem too and couldn't find a solution yet... Using an animated symbol with a video, syncronised together in my project. When I change browser's tab, video continues to play but symbol animation stops and it continues to play only when I switch back to edge tab. So there is no more sync. between two elements... and this is realy boring. Any ideas with this?? Please help, thanks.

Similar Messages

Animation stops in the middle when preview in browser

I have run into a problem where the animation stops in the middle when I preview it in browser, but it is fine when I play it in the program. Please advise how to fix this problem. Thank you very much.
Ramon

I've had this problem with a purchased song but never a ripped song. I think its an encoding problem with iTunes. One poster suggested converting the song, which kind of tells us that its something to do with the encoding. I can't remember the song that this happened with, some Tom Petty tune. But I do remember this, which is strange, this happened on my Touch but not the iPhone with same song.

Has anyone else's weather animations stopped moving??

Has anyone else's weather animations stopped moving?? I have just upgraded to the iPhone 6 Plus with IOS 8.1.

They updated the Reduce Motion setting in Accessibility to reduce that. See if you have that turned on.

Firefox page load or animation stops until i move the mouse or keyborad input

Firefox page load or animation stops until i move the mouse or keyborad input

hello H.Groenewegen, multiple other affected users have reported that this was an issue that can be caused by malware on the system.
please run a full scan of your system with the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] and [http://www.bleepingcomputer.com/download/adwcleaner/ adwcleaner] (both these security tools are free).
[[Troubleshoot Firefox issues caused by malware]]

The animation stops

I have a problem with the created movie clips. After pressing a movie clip the animation starts but if a mouse is moved away it finishes the animation then stops. You can see it at http://krolas.pl/produkty.swf. Could somebody help me to find a solution?

That doesn't explain how you have assembled the design, but here's some recommendations to help you find the problem.
1) instead of using e.target use e.currentTarget. target can point to something inside the object, but currentTarget will point to the object with the listener assigned to it.
2) Use the trace() function in every function you have so that you can track down which ones get executed when you experience the problem. If you just trace the function name that should be enough until you notice something you don't expect.. Then dig deeper within if needed. Example... do this to all your fnctions....
function onOutBack1(e:MouseEvent){
    trace("called functon onOutBack1");
    e.currentTarget.gotoAndPlay("out");
function onOverBack1(e:MouseEvent){
    trace("called functon onOverBack1");
    e.currentTarget.gotoAndPlay("over");
etc...

Slide Animations Stopped Working

Hello,
Last night we had a program in which we were screen sharing a Windows Media Player video. The setup I had was a Content Pod with a PowerPoint file in the front, and the Screen Share Pod behind it. In a new layout I had the reverse setup, the Content Pod behind the Screen Share Pod, so prior to the start of the program we were already Screen Sharing the video, so we just clicked the new layout when it was time and the video was ready to go instantly.
Before we got to the video, we noticed the slide animations in the PowerPoint file in the Content Pod stopped working (they were working previously, tested multiple times). We had to stop the presentation and re-load the file in order to get the animations to work again.
Have you ever had this problem occur? And do you see it correlating to having the Screen Share Pod active throughout the session?
Thanks,
Matt

This is the app that came with the phone itself & can't be removed/reinstalled.

Narration stops briefly, then resumes. Why?

Why does the audio stop during a narration?
I recorded and edited narration for a Keynote presentation in Garage Band, exported to iTunes, converted to mp3. Then I dropped the narration file into the audio well in Keynote. I recorded the presentation, pressing the space bar for transitions and animations.
When I play the presentation back, at the seventh slide, which has no animations, the audio cuts out unexpectedly for about 10 seconds, then returns.
I have turned off power saving settings and re-recorded, to no avail, as the problem persists.
I'd be grateful for any help.

Unless there's a "dead spot" in the file, it's usually an indicator that the HD is "buffering" when it does that.
Causes can be:
Overfull HD (less than 1Gb or 5% available space)
Defective or failing HD (transport is stopping intermittently)
Unwanted "napping" of the HD (Energy Saver settings)
There are others but those are the most likely.
If you have plenty of room on your HD, then it'd be between the other two.
If you see the "beachball" with other apps, when you shouldn't be seeing it, it could be a sign that your HD is going bad.
If you have your Energy Saver settings to not "put disks to sleep when possible", then it's probably the HD going bad.

Importing flash as3 animation: stop commands are ignored in Captivate

I have created a Flash animation in Flash CS5 which has some interactive buttons to go to frames and then stop. The problem is Captivate seems to ignore the stop commands.
When I preview in Flash it works fine, when I preview in Captivate it just keeps on going.
I can't use a click box because I need the user to click one of my interactive buttons to then continue to the nect part of the animation.
I am not a programmer and have just started using Adobe CS5 master edition.
I can add bits of actionscript provided I know how and where :-)
all help for a a dumbo newbie appreciated.....

If your Flash animations are published as AS3, make sure your Captivate movie is also set to publish as AS3 in the Preferences.
Does that do anything?

Why my fla. animation stops at a certain point after previewing it in captivate 3

I have developed an animation using flash CS3. The animation works fine in flash (test movie, and published swf). When I inserted the fla. (insert animation) in my Captivate 3 slide, it stops at the exact same point each time while previewing the animation through the web browser. I have read on this blog that it may be a button or other objects on the slide that has a timer set. I checked the timeline. All of my objects are set at 11 seconds. There are rollovers on the same slide. I have tried to inserting a click box with the "pause project until user clicks" option, syncing the fps, redoing the flash animation and nothing works.
Can anyone help me on this?

Hi there
It may depend on how you created the animation in Flash. Is the animation supposed to loop? If so, did you animate on the main timeline? If you did, that may explain it. You need to animate in something called a "Movie Clip", then insert the Movie Clip on your main Flash timeline.
And thus I have managed to totally expend any knowledge I possess regarding Flash. Most of it is a mystery, in a fog of an enigma, cloaked in a conundrum.
Cheers... Rick
Helpful and Handy Links
Begin learning Captivate 5 moments from now! $29.95
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcererStone Blog
Captivate eBooks

Making my animation stop looping (it should be really simple, right?)

I am trying to achieve a simple thing really; I have made an animation and want it to stop looping at the end.
A quick search of the internet reassured me that this is simply a matter of putting in a stop(); command in the script. Great!
Errr.. no.
Here is what I did:
I created a new layer for my script and called it 'Actions'
selected the final frame of the Actions layer and added a keyframe
selected said keyframe and opened windows->Actions
typed in stop(); and closed the window.
Ok, so that apparently is all there is to it. Only, when I test the animation it doesn't move at all. it seems that the stop command executes right at the beginning and is constant throughout the whole timeline.
Also, I noticed that the Actions layer has a small white circle/dot on frame 1 and on the final frame also. There is no small letter 'a' that should be there on the final frame, but I don't know why.
So, what am I doing wrong?
I realise that if I am struggling to do such a simple task it doesn't bode well for any further learning of actionscript. Which is a shame.
Any help would be great, thanks.
Andrew

What you describe should have worked, but you might have mis-stepped as well. Try having the Actions window opened before you select the frame and type stop(); and leave it open afterwards as well for when you test. As soon as you enter some code in a frame it should display the lowercase "a", so your best bet is to keep trying it different ways until you see that. As I said, the way you describe it is legit, but what you might have done in following what you say might be off.

Issue playing scenes in test movie animations stop playing

I'm fairly new to adobe flash so I hope I use the right terms when asking this question. I am using AS2 in CS5.5.
I am creating a project for a class that introduced me to adobe flash. The issue is I have gotten to a certain point about 15 scenes.
During say the 15th scene scrolling through the timeline animations works fine, playing it on test scene works fine. When I go to play it on test movie it stops at a certain point.
At first I thought it might have been a misplaced stop action but there is none to be found. The weird part is every other scene I create after that
continues to freeze as well, the images are there, but the animations won't play. All my previous animations play before those with the issue, it's just
These new ones won't play for some reason in test movie, but work completely fine in test scene and the timeline. Can anyone help me figure this out please?

you're welcome.
to remedy, remove one or more scenes from your original fla by shift-clicking all the frames/layers in a scene and pasting into a new fla. save the new fla with a new name and publish a new swf that you can load into your original.
there's no limit to how many swfs can be loaded into your original. you might find it convenient to put each scene (after your first few) into their own fla/swf.

Flash player animations stopping on frame 1

In our Digital Signage application, a number of our installations are experiencing problems with the Flash player. It appears that most, if not all of them, are at Flash version 10.3.183.10.
The symptom is: Within our Windows .NET based app (which embeds the flashplayer.ocx) the SWF file is loaded and begins playing - but appears to stop all animations at or around the first frame.   We first thought it was only text that was disappearing but it seems that any object that is placed on screen dynamically (after frame 1) is not showing up.
The screenshots we are seeing will show whatever background image exists plus sometimes the beginning of a text or other object's entry effect. The strange part is that the underlying frame based scripting seems to still process in that we still are receiving the proper fscommands during and at the end of the SWF movie - and the movie will play the proper duration. Thus it seems like the underlying script is chugging along - not realizing that nothing is actually happening graphicaly. Once this problem occurs, it will then effect every subsequent SWF until an application restart or reboot.   We've seen this occasionally for a few months now but it seems to be happening more and more often. We have not been able to reproduce it consistantly in-house and it is still faily rare (Probably 20 out of 1000 units daily) - and not always the same units.
We're still working on corralating other information but that's what we know now.   It would be easy to work around if the scripting would die too (like the WSOD) - in that case we could detect missing fscommands and gracefully restart.
We will eventually get all systems to Flash 11 but that will take a little time - and we're not even sure if that will fix it. ???
Any ideas or thoughts would be appreciated. A fix would be nice but just being able to detect it would satisfy me.
Thanks.

In our Digital Signage application, a number of our installations are experiencing problems with the Flash player. It appears that most, if not all of them, are at Flash version 10.3.183.10.
The symptom is: Within our Windows .NET based app (which embeds the flashplayer.ocx) the SWF file is loaded and begins playing - but appears to stop all animations at or around the first frame.   We first thought it was only text that was disappearing but it seems that any object that is placed on screen dynamically (after frame 1) is not showing up.
The screenshots we are seeing will show whatever background image exists plus sometimes the beginning of a text or other object's entry effect. The strange part is that the underlying frame based scripting seems to still process in that we still are receiving the proper fscommands during and at the end of the SWF movie - and the movie will play the proper duration. Thus it seems like the underlying script is chugging along - not realizing that nothing is actually happening graphicaly. Once this problem occurs, it will then effect every subsequent SWF until an application restart or reboot.   We've seen this occasionally for a few months now but it seems to be happening more and more often. We have not been able to reproduce it consistantly in-house and it is still faily rare (Probably 20 out of 1000 units daily) - and not always the same units.
We're still working on corralating other information but that's what we know now.   It would be easy to work around if the scripting would die too (like the WSOD) - in that case we could detect missing fscommands and gracefully restart.
We will eventually get all systems to Flash 11 but that will take a little time - and we're not even sure if that will fix it. ???
Any ideas or thoughts would be appreciated. A fix would be nice but just being able to detect it would satisfy me.
Thanks.

Preloader animation stops

My problematic preloader can be seen here:
http://www.vintagebycrystal.com/Pages/Main%205.swf
In my preloader I have a small animation above a bar that
fills with color according to the percentage loaded. I also have a
dynamic text box with numbers that count up the percentage.
The animation in my preloader movie clip starts for a second,
then stops while the numbers count up. The animation continues
where it left off after the number has reached 99.
How can I get the train tracks to keep moving while the
number are counting up?
Also, the logo in both the preloader and the main website are
transparent eps files turned fireworks files. Is there a way I can
get them to be more sharp?
I appreciate any advice.
-Crystal

Share you composition (zip and upload to any online storage service like dropbox etc.) with us to check it out.

Jquery animation stops upon new tab or other app.. reason

http://www.appaspect.com/BIGAmritsar/index.php
This is the website where the Jquery animation is working on home page and it stops as soon as we move to some other window or app..

''fngray [[#answer-681309|said]]''
<blockquote>
found it in the theme I was using. So I removed the theme and so far their has not been any more ads pop up or a new page open
</blockquote>
What is the problem maker?

Animation stops in .exe playback

I am trying to publish a Captivate project as an .exe and any
embedded animation that is longer than 60 seconds is stopping
during playback even though the .swf's play fine by themselves. The
frame rates are consistant throughout and the slide lengths are all
the same as the animation length.
I am lost as to why this is happening. Any thoughts?
Thanks

well you answered yourself - 16,000 frames has always been
documented as the limit for flash
(frames, levels, loaded movies).
You will have to re-think your timeline - nobody ever reaches
this length (it's very rare) because
flash was never designed for such long running SWF movies
unless you break it down into several
smaller SWfs and loaded them dynamically (daisy-chain them).
--> **Adobe Certified Expert**
--> www.mudbubble.com
--> www.keyframer.com
ekim2005 wrote:
> I have a couple presentations that I'm trying to create
using a single
> projector/EXE, that include both sound and animation.
They are pretty long in
> terms of how many frames they (current one is 16K frames
+) and the problem I'm
> running into is that the animation keeps freezing
towards the end of the
> presentation. The audio continues to play, but the
animation freezes.
>
> I've tried everything I can think of, but can't figure
out a solution other
> than splitting the project into multiple SWFs and
loading them (loadMovie)
> externally. Ideally, I'd like the project to be just a
single file, but this is
> the only way I can find to get it to work.
>
> Is there an issue with Flash not playing past a certain
number of frames?
>
> Anyone else run into this? Any help/suggestions would be
greatly appreciated!
>
> Thanks,
> Mike
>

Animation Stops Briefly

Similar Messages

Maybe you are looking for