[announce] PortalStudio 2.0 with Interaction Management

MONGOOSE TECHNOLOGY ANNOUNCES PORTALSTUDIO 2.0 WITH INTERACTION MANAGEMENT
Vendor-neutral portal platform now includes RealCommunities 2.0
collaboration applications and Interaction Management Web services
Houston, October 22, 2001 - Mongoose Technology, Inc., the company that set
the benchmark for Portal Lifecycle Management and the first company to
deliver a complete J2EET-based portal design, assembly, deployment, and
management solution, today announced Mongoose PortalStudioT 2.0. The
product, which provides an integrated development environment and portal
platform, now includes Mongoose RealCommunitiesT applications and
Interaction Management web services for online collaboration. Using Mongoose
PortalStudio and Mongoose RealCommunities, companies can incorporate
Interaction Management into their portals and Web sites to increase employee
productivity, enhance partner effectiveness, and build customer loyalty.
Delphi Group has defined Interaction Management: "Interaction management
refers to web applications used to cultivate relationships among portal
constituents. These person-to-person web services facilitate group
formation, enhance team collaboration, and empower knowledge exchange
between employees, customers, partners, and suppliers. Interaction
Management helps organizations capture and retain intellectual capital,
reduce employee turnover, increase team productivity, and build customer
loyalty."
"Interaction Management is a critical component of any portal strategy, and
necessary for effectively nurturing online community and user
relationships," says Nathaniel Palmer, Chief Analyst at Delphi Group. "In
PortalStudio, Mongoose provides the first comprehensive set of web services
for interaction management, within a application framework specifically
designed for deploying and managing portal components."
"We provide enterprise applications to the health care industry and
international retailers" said Brian Fox, Vice President of
MySoftwarePartner. "Our customers must provide timely and accurate
information to consumers and to government agencies. We are using Mongoose
PortalStudio to provide more useful information by aggregating our systems
with other corporate applications in the Enterprise Portal. We are
incorporating RealCommunities collaboration applications to improve customer
support and to reduce the cost of gathering and reporting consumer data. "
PortalStudio with Interaction Management
RealCommunities collaboration applications are modular WebComponentsT of the
PortalStudio platform that can be embedded into any Web site or portal. They
are supported by RealCommunities Web Services that provide open API's to
gather, store, and act upon person and activity related data.
"Interaction Management is the set of person-to-person web services that
support online relationships and transactions," says Mr. Palmer. The
RealCommunities Web Services are based on the Mongoose 12 Principles of
CollaborationT, and include Identity, Groups, Reputation, Environment and
Communication.
RealCommunities WebComponents provide structured interactions to support
group goals. These collaboration capabilities can be incorporated into new
or existing portals and Web sites. RealCommunities WebComponents include:
Expertise & Skills Directory - This application facilitates the search
for a person or a group with the expertise, skills, service capability, or
reputation matching the user's needs.
Engagement & Feedback - After identifying an appropriate individual or
group, the application allows the user to negotiate an agreement for a
consultative or service relationship with the provider and subsequently to
rate the quality and usefulness of the provider's services.
Messages & Chat - These WebComponents provide Message Boards, Chat, and
Instant Messaging
Question & Answer - This post-a-question and get-an-answer mechanism
can be a public or private dialog and is used for self-help and support
applications.
File Sharing & Collaboration - Users can access content from WebDAV
(Web-based distributed authoring and versioning) clients and DAV-enabled
software packages such as Mongoose PortalStudioT, Microsoft® Office XP,
Microsoft® Web Folders, Adobe Acrobat®, and Macromedia Dreamweaver®. Thus a
Word® user can directly open documents that are stored in PortalStudio-based
portals.
Review & Recommend - This facility enables community members to provide
opinions and ratings, look at what others are saying, and view a composite
score of any participant or document.
Rewards & Incentives - Reward employees, partners, or customers who
participate in desired online activities. The application can be configured
to promote loyalty by providing incentives and rewards for desired
behaviors. The rules are easy to configure and change as business needs
evolve.
Tests & Polls - This utility enables a service provider or group leader
to ask questions of a population. Rules can be applied to responses to
generate scoring reports or individualized actions, e.g., if pass test, then
update reputation and deliver certification by email.
Companies can enhance their ebusiness effectiveness with Mongoose
RealCommunitiesT Interaction Management applications for increasing
productivity of sales teams, cultivating buyer and partner loyalty,
capturing better market data, and accelerating innovation and time to
market.
PortalStudio 2.0 Delivers Fast Results
Mongoose PortalStudio 2.0 is a visual portal assembly environment that
allows users to quickly and easily design portal components, assemble them
into a portal, then validate and deploy their portal solution to, for
example, BEA WebLogic. The simplicity of PortalStudio 2.0's one-click wizard
for configuring and deploying to environments such as BEA WebLogic is
dramatic. Like a "portal compiler," the PortalStudio one-click wizard
eliminates timely editing of complex J2EE and BEA specific configuration
files.
Other powerful features and capabilities in PortalStudio 2.0 include:
Instant WebSkinT Personalization
The presentation of information can be customized to the individual or
company standards using Mongoose WebSkins. Users can pick an existing
WebSkin from the PortalStudio library and re-brand their Web application or
apply a custom look-and-feel in seconds. With PortalStudio's
"person-to-system" Web services, XML-based content can be aggregated,
categorized, searched, and cached, served up to various display devices, and
personalized depending on browser, browser version, user, role, locale,
display device, language, and custom rules. Altogether, users can build an
application once, access it from many convenient devices, and be greeted by
a personal presentation.
Aggregate Corporate Applications
Corporate applications and databases can be aggregated into the portal with
Mongoose PortalStudio's "system-to-system" Web services for aggregation,
mapping & merging, caching, scheduled queries, and Rules and Alarms.
Mongoose PortalStudio includes WebConnectors for XML, JDBC, JCA, and MS
Exchange.
Enhance Existing Applications
Mongoose's "federated" approach means users can use Mongoose's PortalStudio
to create a portal from scratch and deploy it on a J2EE application server
from any of the leading vendors; maintain and enhance existing portal
applications; or embed Mongoose WebComponents into an existing Web
application. WebComponents included with PortalStudio include Table, Tree,
News, Document Sharing, Document Search, Message Boards, Chat, Instant
Messaging, email, and a MiniBrowser with source code.
Availability and Pricing
Mongoose PortalStudio for BEA WebLogic and Mongoose PortalStudio 2.0
Enterprise Edition are currently available and 30-day free trials are
available at www.mongoosetech.com. PortalStudio 2.0 Enterprise Edition
supports leading J2EE application servers, including BEA WebLogic,
Oracle9iAS, Orion, Macromedia JRun, and IBM WebSphere. The Enterprise
Edition ships with the Standard library of components, plus RealCommunities
WebComponents and Interaction Management Web services.
Mongoose Technology shatters the $100,000 barrier for an Enterprise Portal.
Pricing begins at $3,000 for the PortalStudio Interactive Development
Environment (IDE) that includes a standard library of WebComponents,
RealCommunities Interaction Management WebComponents, a development-only
license of Orion Application server and a 30-day trial of BEA WebLogic. A
development license of PortalStudioT for BEA WebLogic® is available at an
introductory price of $995. The deployment license of the PortalStudio
Platform is available at an introductory price of $35,000 per CPU.
PortalStudio is available directly from Mongoose as well as through its
value-added resellers including: SSI Technologies, eKnowledgeCenter, and
Iconixx.
About Mongoose Technology, Inc.
Mongoose Technology, Inc. (www.mongoosetech.com) is delivering and setting
the benchmark for Portal Lifecycle Management products that are used
worldwide to design, assemble, deploy, and manage ebusiness portals. The
company's products include: Mongoose PortalStudioT Enterprise Edition, a
visual portal assembly environment for the rapid development of customized
enterprise portals on leading J2EE application servers; Mongoose
PortalStudioT for BEA WebLogicT; and Mongoose RealCommunitiesT Interaction
Management applications for increasing productivity of sales teams,
cultivating buyer and partner loyalty, capturing better market data, and
accelerating innovation and time to market. Major customers and partners
include: BEA (www.bea.com), eBay (www.ebay.com), and SSI Technologies
(www.ssi-americas.com). Mongoose Technology, Inc. was founded in 1999 and is
headquartered at 1300 Hercules, #130, Houston, Texas 77058; phone,
281/461-0099; fax, 281/461-0505.
For questions or comments about this press release, please contact:
[email protected]
[Bullet.gif]

Steps:
On CAS server, install the Reporting Point Service Role.
On System Center Configuration Manager Primary Site Server:
Create or edit the sms_def.mof file and configuration.mof file required for MBAM 2.0 manually.
Run MBAM 2.0 Setup and under Topology, choose System Center Configuration Manager Integration.
Select the Feature “System Center Configuration Manager” and proceed for Pre-requisites check.
All Pre-requisites check must be passed and complete the installation successfully.
On Standalone Server: - SQL Server.
Run MBAM 2.0 setup and choose Configuration Manager Integration.
Do not select System Center Configuration Manager feature.
Install the Recovery Database and Audit Database on the Database Server and reporting.
On Standalone - Web Server.
Run MBAM 2.0 setup and choose Configuration Manager Integration.
Select only the MBAM Admin and Monitoring Feature and Self Server Portal on the Web Server.
Manoj Sehgal

Similar Messages

  • Cisco Email Interaction Manager (EIM) with UCCX 8.5 ?

    Anyone using UCCX 7x/8x with Cisco Email Interaction Manager (EIM) ? Looking for some hands on feedback from someone using it.
    I have a customer currently using the free UCCX 7x/8x Express E-mail Manager (EEM)(it came out with 7.0(1)SR4 and adds a FIFO Email CSQ that doesn’t integrate using .aef scripts just Agent Desktop/Desktop Administrator)
    They want to prioritize other than FIFO, which it appears Cisco Unified E-Mail Interaction Manager can do. They are looking for recommendations on handling email beyond what UCCX can do. They have stated moving to ICM (UCCE) is not a budget option. They have 16 email CSQs and 18 voice CSQs. The Email CSQ pretty much requires a 1 Email CSQ per Agent ratio due to the way Transfers are done with Emails to individuals, which bumps up against sizing issues/A2Q.

    https://supportforums.cisco.com/message/3360647
    eGain now offers a multichannel solution that integrates with Cisco Unified Contact Center Express.
    For more details, please contact:
    Tibor Vari
    eGain Communications
    Email: [email protected]
    Ph #: (201) 236 8353

  • Cisco Interaction Manager with Finesse 9.1.1

    Is it possible to place Cisco Interaction Manager in finesse desktop container as a gadget?
    As I have tried to do that but CIM login interface is not displayed on finesse desktop, instead I am getting white display'

    I just tested this. If i login as an agent i see the gadget but if i login as supervisor, i do not see the gadget.
    Couple of additional questions.
    1. How to get this gadget in the home page and not in a seperate Frame
    Answer: Need to add the gadget commands under the supervisor frame as well.
    2. how to pass the username and password that i enter initially in the finesse login page to CIM?
    BTW, this is for PCCE 9.0.3 and CIM 9.0.1 (not integrated yet)
    -senthil

  • How to use SAP Business Workflow along with Interactive Adobe Form

    Hi Experts,
    I am working on SAP Business Workflow since last couple of years.
    Now i have got a new Project where client wants to use SAP Business Workflow along with Interactive Adobe Form.
    I am new to Interactive Adobe Form and Portal thing and i really dont know from where to start.
    We have one central system and 2 local systems. when we do create a Material document using adobe form workflow should trigger and notification should go to group of users who can approve or reject it, once they approve it document gets created in central system and replicated to 2 local system through ALE.
    In the Local system they do extend the document to different plants, again workflow triggers and notification will go to Managers inbox for the approval.
    Once the final approval done data should go and store in SAP.
    Now here i have couple of Questions.
    1. In SAP R3 Business workflow when i execute the workitem from the inbox i do get the application screen ( i.e. MM01 MRP View ) , what is going to happen if the same case i have with Adobe form?? is it possible or do we have to design a adobe form and we will have to map the fields with backend application??
    2. Do i have to maintained 3 separate Org Structure for 3 different system or using UWL  i can manage the show
    3. Untill final submit is not done, where the application data is going to be, is there any kind of buffer that we will have to keep it or its there with XML file??
    Please help me out.
    Thanks in Advance.
    Regards,
    Manoj

    Hi Manoj,
    Welcome to ADOBE Forms related Workflow Development. Well, here are my answers.
    1) You can go for either go for ISR based development or WD development with Adobe form. In both the cases you can achieve your requirement. Yes, you will have to design the Adobe form and bind the fields to backend.
    2) Am not clear or your System landscape to advice you in these regards.
    3) Until final Submit/Approval is done, the data can be stored in WORKFLOW CONTAINERS or XML FORM(If you go for ISR based Development).
    Hope this helps.
    Regards
    <i><b>Raja Sekhar</b></i>

  • Extend SAP R/3 4.x with Interactive PDF Forms

    Hi there,
    In this blog of Matthias Zeller <a href="http:///people/matthias.zeller2/blog/2004/06/22/the-hidden-secret-of-adobe-reader hidden secret of Adobe Reader</a> there is the following paragraph:
    <i>While mySAP ERP 2004 provides many business scenarios using Interactive Forms out-of-the-box, a lot of customers have asked me how they can use the new Interactive Forms with existing R/3 applications. Therefore, I would like to encourage you to vote for my SAP TechEd presentation proposal ("Extend your SAP R/3 4.x applications with interactive PDF forms"). I plan to discuss how you can connect your existing SAP R/3 applications with SAP Web AS 6.40 to enable interactive form workflows.</i>
    Can somebody tell me if this presentation is somewhere on SDN? Or can somebody tell me where i can find more information about this subject?
    Thx in advance.
    Regards Maarten.

    Hi Maarten,
    Here's a brief run-down on how you could make use of SAP/Adobe Interactive Forms and Workflow:
    1) Remember that a form is really just a UI for collecting data.  A PDF form can be used to collect data online (connected to your SAP system) or offline, e.g. you could send it as a mail attachment, fill it in, and email it to a central point for uploading into the system. 
    2) The main requirements for using SAP Interactive Forms are:
    a) A NW04 (6.40) or NW04s (7.00) WebAs (Java Stack) to run Adobe Document Services. This is the critical component that assigns ReaderRights to the document, e.g. so that the user can change the data and save it on the document.   You could run a WebAs like this alongside your R/3 4.7 - e.g. if you have an XI system or Enterprise Portal you could use that system to run Adobe Document Services.  Every form you create must be generated via the Adobe Document Services to get the Reader Rights. Note: Get a NW04s environment if you can - as this release has usefuul new features such as loading attachments to the PDF, using digital signatures, etc.
    b) A WebDynpro application to generate the Adobe form via Adobe Document Services, and to execute the Adobe Form when using online mode, and to upload offline forms.  Tutorials on how to do this are available in SDN - have a look at the Adobe section within WebDynpro. Note: From ECC 5.0 there are some standard WebDynpros apps provided, but in R/3 4.7 you will need to write your own.
    c) There's also a licensing requirement for any production custom forms (SAP provided forms and cosmetic changes to those forms are free) so make sure you get your SAP account manager involved to help sort out how your intended usage will fit in with your current license agreement and any discounts that may apply.
    3) To use the "form" with workflow has some additional requirements:
    a) You need to store the data entered via the form somewhere that is accessible by Workflow.  The easiest approach here is to use the standard form handling technique Internet Service Requests.  Transaction QISRSCENARIO will let you define all of the form fields, give you BADIs for doing validation, raising workflow events, etc.  Also from ECC 5.0 onwards using Adobe forms as the form entry is a standard option for this technique, so this will help reduce the upgrade impact when you eventually do upgrade.
    b) Assuming you use ISRs, have your WebDynpro App call the function module ISR_PROCESS_EVENT to pass the data to R/3 and do the validation checks.
    c) Assuming you use ISRs, you use the BOR object for notification such as BUS2078, as your main object for the workflow.  The form data is attached to the notification and can be retrieved using function module ISR_SPECIAL_DATA_GET.
    d) If you want to call your WebDynpro App from SBWP (I take you don't have Enterprise Portal?) then use transaction WF_EXTSRV to define the web service to call your WebDynpro app and generate a workflow task for it.  Also you must configure transaction WF_HANDCUST to enable R/3 to handle web services.  Note: If you do have the Enterprise Portal, you can use transaction SWFVISU instead.
    I'd strongly recommend you read the ISR cookbook at http://service.sap.com/isr as well.   ISRs aren't the only way to use Adobe forms with R/3 but they are extremely handy if you want to use your Adobe form with Workflow.
    As for Lotus Notes, you can use your WebDynpro app to generate and send/receive a form to/from an email address.  You can also put a hyperlink in your workflow task to call your WebDynpro app and use RSWUWFML2 (swap to Enhanced Notifications when you upgrade) to send out a mail with the hyperlink attached as per usual.
    You'll also find some useful threads on Adobe forms and Workflow in the SDN BPM Forum.  So if you have workflow specific questions try raising them in the BPM forum.
    Enjoy!
    Regards,
    Jocelyn

  • Error while loggin in to Interaction Manager

    Hi,
    After launching TAW application, when we try to login to Interaction manager with logins
    admin/admin
    or
    other SUoervisor user,
    We get this error at the Java console
    08 Sep 2009 18:32:04:686 FATAL SystemMessageHandler [Revision: 9] received server is down
    08 Sep 2009 18:32:05:766 FATAL SystemMessageHandler [Revision: 9] received server is down
    08 Sep 2009 18:32:06:910 FATAL SystemMessageHandler [Revision: 9] received server is down
    Also the application gives these errors-
    "Login to IM Failed"
    "Unable to retrieve data from webserver"
    Any pointers to solve these issues are much appreciated.

    1. In 8.1 version Interaction Manager is not first point (may be it not supported). To log in you must deploy cca aplication and log to <websever>/cca application.
    2. Make shure that the IMServer is running via Network Manager.
    Jan

  • Reassign activities in Email Interaction manager

    Hello Mates,
    i need to delete an agent in Cisco Email Interaction Manager. This fails with this message. Any ideas how to delete the user?
    the user that your trying to delete has some open activities or cases or suggestions in feedback mode. Please reassign them before dewleting this user.
    cheers
    alex

    thank you mate, i could complete all the activities for the user but there is still one case which i cannot close. there are 2 activities in the case but in my current open activities these two activities are not there.
    any ideas?
    alex

  • HTTPS for CCA Interaction manager?

    our configuration uses https connectivity for clients using interaction manager. Therefore, http ports have been disabled. When I login to interaction manager at https://<hostname>/cca/, i'm presented with the login screen.
    Upon login, the cca app begins launching and downloading jar files from the server as needed. When it tried to download these jar files, somehow the protocol used is http instead of https.
    We suspect that the cause is cca/download.jsp (in the web archive cca.war). Our environment uses Weblogic and Sun One web Server. Sun One Web Server actually receives all client requests and proxies them to Weblogic (cca).
    In cca/download.jsp, the following code exists. I believe that cca is unable to guess the protocol and defaults to http. We need the default to be https.
    String protocol = null;
    try{
    protocol = request.getProtocol();
    //We don't need the version information, split it away
    String[] arrProtocol = protocol.split("/");
    protocol = arrProtocol[0].toLowerCase();
    catch(Exception e){
    System.out.println("Errror occurred: " + e);
    //If there is any error in getting the correct protocol, we could still use http^M
    //to install and it would work
    protocol = "http";
    }

    We used external SSL devices to handle HTTPs. The F5 Big IP load balancers can sit in front of CCA and they can be configured to off load the SSL from the CCA web servers.

  • Interaction Manager 4.4 reopen case close

    Hello I need help!
    I have CIM Interaction Manager 4.4. My customer want to do forward it to email that already stay close.
    I have this answer:
    "Once the activity is closed you cannot reopen it to forward it again. But if the agents are however non-ipta agents you can configure them to be able create a new email and use an existing case ID to make a new activity part of an ongoing thread. This is not a new function, this would be available in 4.4 also. "
    But  I do not see how can to insert case close to new case. can anyone tell me how to do that?
    Thanks.

    Thank you for the reply.
    I will start by saying that I don't know much about the product so my understanding of standalone and integrated is a little limited. Part of my enqury here is to find documentation that outlines the differences, explains the installtion procedures for both options, etc.
    By support I mean will TAC support it when we call in for a trouble.
    All documentation (that I could find) in CCO is in reference to Enterprise. Below is from the EIM 4.3 install guide. No reference to standalone vs integrated.
    Integrating Cisco Interaction Manager with Unified CCE
    Cisco Interaction Manager is integrated with Unified CCE by running the Cisco Interaction Manager Integration
    Wizard on the application server of Cisco Interaction Manager. If you have more than one application server,
    you can run the wizard from any one of them. The wizard imports the media routing domains, agents, and skill
    groups information from the Unified CCE database to the Cisco Interaction Manager database.
    I have reached out to our local office so hopefully they can help.....
    Thanks again...

  • Bar-coding with Inventory management

    Dear All,
    I am looking for some information, like how to use/develope a interface of hand held device using Barcode with inventory management.
    Any suggestions or information is much appreciated.
    Thanks and Regards
    Bhaskar

    <b>SAP Console</b> –Framework which enables users to execute R/3 transactions from Character based device including RF devices.
    SAP Console consists of following three main components
    1. SAP Console – Software / Interface component
    2. SAP Console Administrator – Defining properties of SAP console
    3. SAP Console I/O Engine – I/O engine through which SAP console and User interact
    Installation of SAP Console is a part of SAP GUI installation
    Telnet server installation on the same machine in which SAP console is installed.
    Standard Telnet server are
    1.Slnet From Seattle Labs
    2.GS_Tnet from Georgia Soft works
    But any Telnet Sever application can be used which supports VT220 emulation.
    Telnet Client is the Interface which is used to execute transactions. Ex. – RF device
    Here are some more useful links
    SAP Library (Online-Help) for SAP AII 4.0
    http://help.sap.com -> Documentation -> mySAP Business Suite -> mySAP Supply Chain Management -> SAP Auto-ID Infrastructure -> SAP Auto-ID Infrastructure 4.0
    Master Guide and Upgrade Master Guide for SAP AII 4.0
    http://service.sap.com/instguides -> SAP Components -> RFID-Enabled Supply Chain Execution -> Using SAP Auto-ID Infrastructure 4.0
    Business Scenario Descriptions and Configuration Guides
    http://service.sap.com/scm -> RFID -> Detailed Information
    Also check the blogs here: Product Traceability & RFID
    Here is a link which will give you information on the basics of RFID
    http://www.webopedia.com/TERM/R/RFID.html

  • Problem in working with Interactive Scrip Editor?

    Hi,
    I have logged in as interaction center manager and working with interactive script editor, the problem that i am facing is that when i click on create new option with script as subgroup nothing is showing up,just one tab script chapter.
    On the other hand if i am selecting any script from the repository on the right hand side its showing all the tabs script properties,script profiles,script chapters,script transport.
    also i am able to drag and drop questions in the same but at the time of creating a new script none of things is happening.
    what might be reason or m i missing out something???

    Video is like Image formats, but on steroids. Also, many formats, such as AVI can have 100's of different CODEC's inside them. It is almost like having a JPEG, that contains a TGA, or a TIFF, or a PCX, or any number of what we see as other formats. It can be daunting, but let's start at the beginning.
    For a discussion on formats, such as AVI, MOV, WMV, etc., see this article: http://forums.adobe.com/thread/440037?tstart=0
    As CODEC's are the "building blocks" of AV files, this article is good too: http://forums.adobe.com/thread/546811?tstart=0
    As you see from that first link, the format is just a "wrapper," and can contain all sorts of "stuff." That FAQ Entry will tell you how to "peek inside" the wrapper. That is what we need, as Mylenium asks. If you can let us know all about the faulting files, maybe someone can help you.
    Also, PS has somewhat limited Video support, both on Decode and Encode, so, and depending on what you have, you might have to convert that/those file(s).
    Good luck,
    Hunt

  • How Transaction Manager work with Resource Manager, like Connection pool?

    hi,
    I'm using BEA Webloigc8.1 Stateless Session Bean/DAO/Oracle stored proc.
    but I'm not quite clear how Transaction Manager work with Resource Manager, like Connection pool.
    my understanding is that, in a weblogic transaction, a stateless session bean interact with several DAOs, and for each method of DAO a connection is acquired from connection pool. I've heard that the connection will not return to pool until the transaction commits.
    My question is that, does it mean that for a weblogic transaction, multiple connections might be allocated to it? and if multiple connections are allocated, then how many oracle transactions would be started? or multiple connections share the same oracle transaction?
    I didn't feel it make sense to start multiple oracle transactions, cause deadlock might be incurred in a single weblogic transaction.
    any help appreciated!

    Xin Zhuang wrote:
    hi,
    I'm using BEA Webloigc8.1 Stateless Session Bean/DAO/Oracle stored proc.
    but I'm not quite clear how Transaction Manager work with Resource Manager, like Connection pool.
    my understanding is that, in a weblogic transaction, a stateless session bean interact with several DAOs, and for each method of DAO a connection is acquired from connection pool. I've heard that the connection will not return to pool until the transaction commits.
    My question is that, does it mean that for a weblogic transaction, multiple connections might be allocated to it? and if multiple connections are allocated, then how many oracle transactions would be started? or multiple connections share the same oracle transaction?
    I didn't feel it make sense to start multiple oracle transactions, cause deadlock might be incurred in a single weblogic transaction.
    any help appreciated!Hi. If you configure your WLS DataSource to use keep a connection for
    the duration of a tx, it will do that, and in any case there can be
    no deadlock however many connections operate for a given XA transaction.
    Here is the best coding form for DAOs or any other user-written code
    for using WebLogic DataSources. This is important for two reasons:
    1 - Thread-safety is maintained as long as the connection is a
    method-level object.
    2 - It is crucial to notify WebLogic that you are done with a connection
    ASAP, by your calling close() on it. We will then put it back in the
    pool, or keep it under the covers for your next request if it's in a
    transaction etc. The pool is optimized for quick get-use-close scenarios.
    public void one_of_my_main_JDBC_Methods()
    Connection con=null; // Must be a method level object for thread-safety
    // It will be closed by the end of the method.
    try {
    con = myDataSource.getConnection(); // Get the connection in the try
    // block, directly from the WebLogic
    // datasource
    // do all the JDBC within this try block. You can pass the
    // connection to subordinate methods, but not to anywhere
    // that thinks it can use the connection later.
    rs.close(); // close any result set asap
    stmt.close(); // then close any statement asap
    // When you're done with JDBC
    con.close(); // close the connection asap
    con = null; // nullify it so the finally knows it's done
    catch (Exception e) {
    // do whatever catch stuff you want. You don't
    // need a catch block if you don't want one...
    finally {
    // It is important to close a JDBC connection ASAP when it's not needed.
    // without fail, and regardless of exit path. Do everything in your
    // finally block in it's own try-catch-ignore so everything is done.
    try { if (con != null) con.close();} catch (Exception ignore){}
    return ret;
    }

  • Call Manager Express B-ACD with Call Manager 5 or 6

    Can I use the Call Manager Express B-ACD with Call Manager 5 or 6, because there is no autoattendant in CCM 5 or CCM 6

    Hi Zohaib,
    With CCM (all versions), they do ship with a "stripped down" version of IPCC/CRA which is where the actual AA is built. But this is not really an "on box" solution :( You will need a seperate MCS box to install IPCC on and then integrate with CCM via jtapi. Here is a clip and link for CCM 5.x and a link for 6.x which is a rather large PDF which I am having trouble downloading today;
    Cisco CallManager AutoAttendant
    Cisco CallManager AutoAttendant, a simple automated attendant, allows callers to locate people in your organization without talking to a receptionist. You can customize the prompts that are played for the caller, but you cannot customize how the software interacts with the customer.
    Cisco CallManager AutoAttendant comes bundled with Cisco CallManager on the Cisco CallManager 5 agent IPCC Express bundle.
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_administration_guide_chapter09186a0080531888.html#wp1026233
    Check out the 6.1 Features and Services Guide here;
    http://www.cisco.com/en/US/products/sw/voicesw/ps556/prod_maintenance_guides_list.html
    Hope this helps!
    Rob

  • Setting office Hours in Cisco Web Interaction Manager

    Hi
    I was testing cisco Web Interaction manager for Live chat with the customers. I was getting messages for off office hours.
    I want to change the officehours . Is there any place I can change the office hours ?.
    I am using Cisco Web and Email Integration ver 4.3.2.3
    I am new to this product.  Any help on this would be great help for me.
    Thanks in Advance,

    Page 22 of the guide http://www.cisco.com/en/US/docs/voice_ip_comm/cust_contact/contact_center/cisco_interaction_manager/cim_43/user/guide/cisco_im431_cce_userguide_administration_chat.pdf
    Options tab, go to the Off hours section. Set up the text to be displayed when no agents are
    available.

  • Cost(vprs) of free goods with batch managment

    Dear Gurus,
    I have a problem ahout free goods with batch management.
    Cost(VPRS) is not accumulated in billing(free goods is not relevant for billing).
    My configurations are shown as below:
    Ordered goods (and batch) item category :zta1(copied from tan)
    Free goods (and batch) item category :zann (copied from tann) pricing:B ;not relevant for billing;dermination cost:X
    copy control(from delivery to billing):
    ztan: accumulation cost :X
    If I use the material without batch management,Cost of free goods(without batch) is accumulated to main item(ordered goods).
    So, what can I do?
    Thanks and Best Regards,
    Lykin Kan

    Hi,
    These notes are useful:
    SAP Note 1365939 - VPRS logic and Customizing settings in SD
    SAP Note 547570 - FAQ: VPRS in pricing
    If you have the problem in the transfer from SD conditions to CO-PA, check if you transfer only invoices to COPA, if you don't invoice the deliveries of free goods, then you don't transfer this 'sales' or costs of 'gifts' to COPA. You can check the customizing of COPA in tcode ORKE (IMG for COPA). SAP Note 74486 - INFO: Overview of consulting notes for CO-PA is a good summary about this issue.
    I hope this helps you
    Regards,
    Eduardo
    PD: I forgot SAP Note Number 33968 SD/CO-PA: Characteristics from sales doc tables
    Edited by: E_Hinojosa on Sep 10, 2010 9:44 AM

Maybe you are looking for

  • Oracle Post Installation Semaphore Parameters

    SYS INFO: Oracle 11g R2 SUSE Linux 11. The Oracle posting installation guide requires to set the Semaphore Parameters. Here are the steps: Calculate the minimum total semaphore requirements using the following formula: sum (process parameters of all

  • LaCie 500GB d2 Quadra (Final Cut & DV Cam)

    Got a MacBook Pro (2008) only one firewire and i will be capturing my movies from my DV Camcorder and also will be setup up as m default storage for Final Cut. I see in the description of LaCie 500GB d2 Quadra: You can also daisy-chain via FireWire o

  • Disable "Allow files on this drive to have contents indexed in addition to file properties" for Mointpoints

    Hey Guys, I wandt to optimize all our SQL Servers and so I want to disable the  "Allow files on this drive to have contents indexed in addition to file properties" option in the Volume Properties.  The SQL Server is installed under D:\SQLSERVER which

  • 10.3.9 Upgrading?

    Hello, I have just got my first mac its a powermac g4 733 40gb, 1.5gb of ram and i love it! But i want to install CS5 on it and other programs but it needs updating. What's the best way about upgrading? Thanks

  • Attaching files to an email in icloud

    Is there anyway to reset the window size of the file window that pops up when you are adding a file to an email in icloud?  My window only shows minimal information and I have to manually resize it every time I want to attach a file.