Annoying errors from EMGC

Hi,
I am new to EM GC and trying to learn that. We have a EM GC setup and it is sending us this annoying email saying
Critical: myEMserver:3872 - 30 successive severity upload requests have failed. Last severity upload error is ORA-01461: can bind a LONG value only for insert into a LONG columnthe number 30 successive varies from email to email. sometimes it is 70 or 50 or 38 etc... But the ORA-01461 is constant. I don't know why we are getting this and how to correct this. Please help.
When I searched for the error message, somebody said to stop all the opmnctl, listener, shutdown the db and then start everything again.
There I got into another problem when I executed opmnctl startall, I got this
[oracle@myEMserver bin]$ ./opmnctl startall
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=lxdbav05.mlgw.org:6201
    0 of 1 processes started.
ias-instance id=EnterpriseManager0.myEMserver.mlgw.org
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
    HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=27662)
    failed to start a managed process after the maximum retry limit
    Log:
    /d10/OracleHomes/oms10g/opmn/logs/HTTP_Server~1in HTTP_Server~1 file I don't see any specific error message.
11/08/01 11:50:47 Start process
/d10/OracleHomes/oms10g/Apache/Apache/bin/apachectl start: execing httpd{--------
11/08/01 11:50:47 Start process
/d10/OracleHomes/oms10g/Apache/Apache/bin/apachectl start: execing httpd
Thank you.

O.K. Now I am not getting the emails anymore, But I cannot say I fixed the issue. Because, I am not able to access the EM GC home page itself. I did a reboot of the server. It did come up good. Then I started the db, and the listerner. Both are good and I am able to connect to them remotely as well as locally. But when I started the oms it got this error.
$ cd /app01/OracleHomes/oms10g/bin
$ ./emctl start oms
Oracle Enterprise Manager 10g Release 3 Grid Control
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
opmnctl: opmn started
Starting HTTP Server ...
Starting Oracle Management Server ...
Checking Oracle Management Server Status ...
Oracle Management Server is not functioning because of the following reason:
Unexpected error occurred. Check error and log files.Then I check the log files.
$ cd ../sysman/log
log] $ vi emdctl.trc
2011-08-04 15:25:27 Thread-4138543888 ERROR http: 7: snmehl_read: error on read: Connection reset by peer (error = 104)
2011-08-04 15:25:28 Thread-4138208016 WARN http: snmehl_connect: connect failed to (myserver.my.domain:1157): Connection refused (error = 111)
2011-08-04 20:25:28 Thread-4138208016 ERROR http: snmehl_connect: Failed to get address for myserver.my.domain: Non recoverable errors (error = 3)I am stuck and I don't know what to do.
Thanks,
Edited by: DBA_1976 on Aug 4, 2011 4:00 PM

Similar Messages

Annoying error message: ieee80211 phy0: invalid plcp cck rate (0)

Greetings Fellow Forumers!
I have an annoying issue caused by (I think) the firmware (carl9170) necessary to allow my USB NIC to work. The issue itself is that this message will pop up on my console and TTY:
ieee80211 phy0: invalid plcp cck rate (0)
I have searched the forums and found nothing (as of yet). I have, however, found some sparse information on the Internet but it isn't very helpful. Most of what I've read describes the behaviour itself (the error messages spamming the screen) and developers who figured out that it is the firmware causing this behaviour. I have yet to find information about how to solve this issue and stop the error from repeating itself ad nauseum. What I have read so far also hasn't cast any illumination about the underlying cause as to why the error message is being printed in the first place.
LSHW shows this about the USB device itself:
bus info: usb@2:2
logical name: wnet
capabilities:
ethernet,
Physical interface,
Wireless-LAN
configuration:
broadcast: yes
driver: [i]carl9170[/i]
driverversion: 3.15.8-1-ARCH
firmware: 1.9.6
ip: 192.168.1.74
link: yes
multicast: yes
wireless: IEEE 802.11abgn
If all I can do is suppress this message I'll be happy with that. Admittedly, though, I'll need a hint or two about how to do that.

Greetings Fellow Forumers!
I have an annoying issue caused by (I think) the firmware (carl9170) necessary to allow my USB NIC to work. The issue itself is that this message will pop up on my console and TTY:
ieee80211 phy0: invalid plcp cck rate (0)
I have searched the forums and found nothing (as of yet). I have, however, found some sparse information on the Internet but it isn't very helpful. Most of what I've read describes the behaviour itself (the error messages spamming the screen) and developers who figured out that it is the firmware causing this behaviour. I have yet to find information about how to solve this issue and stop the error from repeating itself ad nauseum. What I have read so far also hasn't cast any illumination about the underlying cause as to why the error message is being printed in the first place.
LSHW shows this about the USB device itself:
bus info: usb@2:2
logical name: wnet
capabilities:
ethernet,
Physical interface,
Wireless-LAN
configuration:
broadcast: yes
driver: [i]carl9170[/i]
driverversion: 3.15.8-1-ARCH
firmware: 1.9.6
ip: 192.168.1.74
link: yes
multicast: yes
wireless: IEEE 802.11abgn
If all I can do is suppress this message I'll be happy with that. Admittedly, though, I'll need a hint or two about how to do that.

Error from reports from ZAM(Graph or PDF) - File does not begin with '%PDF-'.

I just noticed today that any Graph or PDF report I try to view I get the
following error - Error from reports from ZAM - File does not begin with
'%PDF-'. I tried to just save the file and then open it, but get the same
error. I can open other pdf files I have downloaded from other sites ok.
Anyone have any idea? I haven't done anything to that server that I am
aware of in quite a while.
Thanks
Bill

I took a closer look at the files it downloaded, opened them with notepad,
haer is what it says:
XSL Transform or subsequent processing failedThe document has no pages.
"Bill" <[email protected]> wrote in message
news:2bBtk.2164$[email protected]..
>I just noticed today that any Graph or PDF report I try to view I get the
>following error - Error from reports from ZAM - File does not begin with
>'%PDF-'. I tried to just save the file and then open it, but get the same
>error. I can open other pdf files I have downloaded from other sites ok.
>Anyone have any idea? I haven't done anything to that server that I am
>aware of in quite a while.
>
> Thanks
>
> Bill
>

As soon as I login with iChat, I get an error from MobileMe!

Hey, I've had this issue for a while, and my work around for it was just not using iChat. However, I want to use iChat now so I need a proper resolution. Now I have mobile me with my [email protected] address, and I have my iChat account with [email protected] (created before my MM subscription).
When I log into iChat for the first time, within minutes I get an error from MobileMe saying "You've entered an incorrect password for MobileMe, please try again"... I didn't do anything though.
If I go to MobileMe in System Preferences, it says: "Your password has changed. Enter your new password.
If you have not changed (or reset) your password contact MobileMe support."
If I enter my password in and get that fixed, the next time I start up iChat it says: "Your login ID or password is incorrect"... soo I'm confused.
The password for my @me and @mac addresses are different, is it possible they are sharing the same keychain? I do have the check box ticked to remember the password.
Any idea's?

Hi,
I would not repair at this time.
In the list of password you should find the one for iChat Or possibly several for iChat if you have different Account/Screen Names list by their Account names.
Double click on the one that is causing you issue.
In the new window that pops up put a tick in the Password Box. You will probably have to confirm with your Admin Password to Allow Once.
Does this show the right password ?
If not change the Password.
If it does then click the Access Tab and see if iChat is Allowed (Or Allow All is being used)
Either change to Allow All or add iChat to the List.
7:45 PM Saturday; April 3, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

How to get actual error from Crystal Report

We are using Crystal report in web service.
We faced some problem due to crystal report unexpected error.
Refer the below error message.
Xception E NSF NSFZ1100 20100608 145511565 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService Showing a modal dialog box or form when the application is not running in UserInteractive mode is not a valid operation. Specify the ServiceNotification or DefaultDesktopOnly style to display a notification from a service application.
Xception E NSF NSFZ1100 20100608 145511972 GPRAB0 : GPRZ10 GUEC0001 [1] AbstractService at System.Windows.Forms.MessageBox.ShowCore(IWin32Window owner, String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon, MessageBoxDefaultButton defaultButton, MessageBoxOptions options, Boolean showHelp)
at System.Windows.Forms.MessageBox.Show(String text, String caption, MessageBoxButtons buttons, MessageBoxIcon icon)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e, Boolean suppressMessage)
at CrystalDecisions.Windows.Forms.CrystalReportViewer.HandleExceptionEvent(Object eventSource, Exception e)
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPageNumber()
at CrystalDecisions.Windows.Forms.ReportDocumentBase.GetLastPage()
at CrystalDecisions.Windows.Forms.DocumentControl.ShowLastPage()
at CrystalDecisions.Windows.Forms.PageView.ShowLastPage()
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.TotalPageCount(ReportDocument Rpt)
at Biz.Nissan.Cats.CORE.REPORT.LibCrystalReport.Print(BaseReport RptDefinition)
at Biz.Nissan.Cats.CORE.REPORT.MCTLIST260Print.Print(IFData ifData)
at Biz.Nissan.W3.CATS.BC.Service.DistributeService.ExecuteMpp()
How we get the actual error from crystal report?
Thanks in Advance

Same as
crystal report unexpected error in Web service (IIS)
Closing this thread.
Ludek

The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.

got event ID 4015 and source DNS-Server-Service. please suggest how to fix this issue
The DNS server has encountered a critical error from the Active Directory. Check that the Active Directory is functioning properly. The extended error debug information (which may be empty) is "". The event data contains the error.
Raj

Hi
first run "ipconfig /flushdns" and then "ipconfig /registerdns" finally restart dns service and check the situation,also you can check dns logs computer management ->Event viewer->Custom Views->Server roles->DNS.

Smartform Printing : Error in spool C call: Error from TemSe

Hi! everybody,
I am stating my problem as follows : I have to print a bar-code sticker of size 10 X 7 cms. I have worked on bar-codes before this also. This time the output from a smartform is to be given to a ZEBRA TLP 2844 printer. I initially encountered problems in printing. The data does not fit on to the page.
After a lot of searching I found that ZEBRA was a partner of SAP and that a special device type needs to be created for output from a ZEBRA printer. I did this two times. Each time my steps were as described under.
To create the device type I did the following :
1. I finally found the driver from the ZEBRA website from http://www.zebra.com/id/products/global/en/utilities/sap_device_types.UtilityFile.File.tmp/Zebra_SAP_Device_Types.zip From this I uploaded the driver for 203 DPI zebra printer with IBM code 850 font file name "YZB200.PRI" into the transaction SA38.
2. Then I created a new device ZEB10 in SPAD after assigning my format to the device.
Thereafter, I tried to print my sticker. During this procedure, on selection of the new device type, the fonts automatically changed to ARIAL in the print preview. When I give the print command (Spool request : Print immed = X, Delete after output = X & New spool request = X) it gives an error message Error in spool C call: Error from TemSe.
Since the output had not been issued, I opened the spool request to view its TemSe characteristics. Here I found
Spool Attributes
Output Device    ZEB10
Format           ZTT               Format
Doc. Category    SMART
Recipient
Department
Deleted On       19.01.2011
Authorization
Output Attributes
No. of Copies   1
Priority              5
SAP Cover Page Do not print SAP cover page
OS Cover Sheet Print as set at printer
Requested           0
Processed           0   With Problem                             0
                        With Error (Not Printed)                 0
Storage Mode Print
TemSe Attributes
Object name           SPOOL0000013836
Data type             ????????????
Character set         0 -
> Character set of dev type = 1162
Number of parts       0
Record format
Size in bytes         0
Storage location
On seeing SP01
      Spool no.              Type                 Date        Time   Status   Pages               Title
       13836      Smartforms(OTF) 11.01.2011 07:32       +          0      SMART LP01 USERID
I hope this data helps you help me. Please ask for more data if you wish. Also, I have searched vastly for this error on the net have already come across the link http://help.sap.com/saphelp_45b/helpdata/en/d9/4a8f9c51ea11d189570000e829fbbd/frameset.htm but to no use. On the SDN, I have not found a similar thread and that is why I decided to post this problem here, hoping to find a solution. Kindly help.
Regards,
Manas

Hi Manas,
I am facing the same issue for one of my clients.
Can you please share the solution with me if you have come out with it.
Regards,
Nirmal.K

How to remove error from propagation and verify replication is ok?

Have a one-way schema level streams setup and the target DB is 3-node RAC (named PDAMLPR1). I run a large insert at source DB (35million rows). After committing on source, I made a failure test on the target DB by shutting down the entire database. The streams seems stopped as the heartbeat table sequence (it inserts a row each min) on target is still reflecting last night. We get the error in the dba_propagation:
ORA-02068: following severe error from PDAMLPR1
ORA-01033: ORACLE initialization or shutdown in progress
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 1087
ORA-06512: at "SYS.DBMS_AQADM_SYS", line 7639
ORA-06512: at "SYS.DBMS_AQADM", line 631
ORA-06512: at line 1
08-FEB-10
while capture, propagation, and apply are all in enabled status. I restarted capture and propagation at source DB. But still see the error message above. My questions are:
1. How to delete the error from dba_propagation?
2. How to verify the streams is still running fine?
In normal test, during such large insert, the heartbeat table added a row in an hour. Very slow.
thanks for advice.

Well, if I can give you my point of view: I think that 35 millions LCR is totally unreasonnable. Did you really post a huge insert of 35 millions then committed that single utterly huge transaction? Don't be surprised it's going to work very very hard for a while!
With a default setup, Oracle recommends to commit every 1000 LCR (row change).
There are ways to tune Streams for large transaction but I have not done so personnaly. Look on Metalink, you will find information about that (mostly documents id 335516.1, 365648.1 and 730036.1).
One more thing: you mentionned about a failure test. Your target database is RAC. Did you read about queue ownership? queue_to_queue propagation? You might have an issue related to that.
How did you setup your environment? Did you give enough streams_pool_size? You can watch V$STREAMS_POOL_ADVICE to check what Oracle think is good for your workload.
If you want to skip the transaction, you can remove the table rule or use the IGNORETRANSACTION apply parameter.
Hope it helps
Regards,

Error while running ejbc. Fatal error from EJB Compiler ---- Error while pr

Hi!
I was deploying a test application for a session bean with sun 1 studio 5 and I started getting this message while deploying.
I had tested the bean previously and I had no problems.
I found this in the sun app server 7 release notes, but I don't understand what I'm supposed to do...
"Deployment of CMP beans fails.
The following error is thrown because there are no <query-params> entries in the container-managed persistence (CMP) bean in sun-ejb-jar.xml file:
Error while running ejbc. Fatal error from EJB Compiler ---- Error while processing CMP beans.
Solution
Even if it isn't necessary for the CMP beans, add the query-params tag for finders in the sun-ejb-jar.xml file with the empty parameters."
Here is my sun-ejb-jar.xml file:
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE sun-ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Sun ONE Application Server 7.0 EJB 2.0//EN" "http://www.sun.com/software/sunone/appserver/dtds/sun-ejb-jar_2_0-0.dtd">
<sun-ejb-jar>
<enterprise-beans>
<name>GestorDoBanco_EJBModule</name>
<ejb>
<ejb-name>Cliente</ejb-name>
<jndi-name>ejb/Cliente</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/Cliente.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>ClienteAssociadoAConta</ejb-name>
<jndi-name>ejb/ClienteAssociadoAConta</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/ClienteAssociadoAConta.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>Conta</ejb-name>
<jndi-name>ejb/Conta</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/Conta.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>GestorDoBanco</ejb-name>
<jndi-name>ejb/GestorDoBanco</jndi-name>
<pass-by-reference>false</pass-by-reference>
</ejb>
<ejb>
<ejb-name>MensagemM003</ejb-name>
<jndi-name>ejb/MensagemM003</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM003.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM003Rejeitada</ejb-name>
<jndi-name>ejb/MensagemM003Rejeitada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM003Rejeitada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM012</ejb-name>
<jndi-name>ejb/MensagemM012</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM012.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM012Rejeitada</ejb-name>
<jndi-name>ejb/MensagemM012Rejeitada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM012Rejeitada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM103</ejb-name>
<jndi-name>ejb/MensagemM103</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM103.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>MensagemM112</ejb-name>
<jndi-name>ejb/MensagemM112</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/MensagemM112.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>Registo</ejb-name>
<jndi-name>ejb/Registo</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/Registo.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>TransaccaoConfirmada</ejb-name>
<jndi-name>ejb/TransaccaoConfirmada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/TransaccaoConfirmada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>TransaccaoFinalizada</ejb-name>
<jndi-name>ejb/TransaccaoFinalizada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/TransaccaoFinalizada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<ejb>
<ejb-name>TransaccaoIniciada</ejb-name>
<jndi-name>ejb/TransaccaoIniciada</jndi-name>
<pass-by-reference>false</pass-by-reference>
<cmp>
<mapping-properties>pcImpl0/moduleComp1/Data/TransaccaoIniciada.mapping</mapping-properties>
</cmp>
<refresh-period-in-seconds>600</refresh-period-in-seconds>
</ejb>
<pm-descriptors>
<pm-descriptor>
<pm-identifier>SunONE</pm-identifier>
<pm-version>1.0</pm-version>
<pm-class-generator>com.iplanet.ias.persistence.internal.ejb.ejbc.JDOCodeGenerator</pm-class-generator>
<pm-mapping-factory>com.iplanet.ias.cmp.NullFactory</pm-mapping-factory>
</pm-descriptor>
<pm-inuse>
<pm-identifier>SunONE</pm-identifier>
<pm-version>1.0</pm-version>
</pm-inuse>
</pm-descriptors>
<cmp-resource>
<jndi-name>mysqlpmanager</jndi-name>
<default-resource-principal>
<name>bes</name>
<password>besbes</password>
</default-resource-principal>
</cmp-resource>
</enterprise-beans>
</sun-ejb-jar>
Thanks in advance for any help.
Nuno

http://docs.sun.com/source/817-2175-10/decmp.html
Please go to the above docs and look thru the examples given in it.
Example 2
This query returns all products in a specified price range. It defines two query parameters which are the lower and upper bound for the price: double low, double high. The filter compares the query parameters with the price field:
"low < price && price < high"
The finder element of the sun-ejb-jar.xml file would look like this:
<finder>
<method-name>findInRange</method-name>
<query-params>double low, double high</query-params>
<query-filter>low < price && price &lt
high</query-filter
</finder>
I hope this hepls. In your case u just have to make it null.

Need Help in expdp for resolving ORA-39127: unexpected error from call

Hi All,
My Environment is -------> Oracle 11g Database Release 1 On Windows 2003 Server SP2
Requirement is ------------> Data Pump Jobs to be completed without any error message.
I am tryring to take export data pump of a schema
Command Used --> expdp schemas=scott directory=data_pump_dir dumpfile=scorr.dmp version=11.1.0.6.0
Export Log Show this details its completed with 2 error messages
Export: Release 11.1.0.6.0 - Production on Saturday, 23 April, 2011 13:31:10
Copyright (c) 2003, 2007, Oracle. All rights reserved.
Connected to: Oracle Database 11g Enterprise Edition Release 11.1.0.6.0 - Production
With the OLAP option
FLASHBACK automatically enabled to preserve database integrity.
Starting "SYSTEM"."SYS_EXPORT_SCHEMA_01": system/******** schemas=scott directory=data_pump_dir dumpfile=scorr.dmp version=11.1.0.6.0
Estimate in progress using BLOCKS method...
Processing object type SCHEMA_EXPORT/TABLE/TABLE_DATA
Total estimation using BLOCKS method: 192 KB
Processing object type SCHEMA_EXPORT/USER
Processing object type SCHEMA_EXPORT/SYSTEM_GRANT
Processing object type SCHEMA_EXPORT/ROLE_GRANT
Processing object type SCHEMA_EXPORT/DEFAULT_ROLE
ORA-39127: unexpected error from call to export_string :=SYS.DBMS_CUBE_EXP.schema_info_exp('SCOTT',0,1,'11.01.00.06.00',newblock)
ORA-37111: Unable to load the OLAP API sharable library: (The specified module could not be found.
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 205
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 280
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 5980Processing object type SCHEMA_EXPORT/PRE_SCHEMA/PROCACT_SCHEMA
Processing object type SCHEMA_EXPORT/TABLE/TABLE
Processing object type SCHEMA_EXPORT/TABLE/INDEX/INDEX
Processing object type SCHEMA_EXPORT/TABLE/CONSTRAINT/CONSTRAINT
Processing object type SCHEMA_EXPORT/TABLE/INDEX/STATISTICS/INDEX_STATISTICS
Processing object type SCHEMA_EXPORT/TABLE/STATISTICS/TABLE_STATISTICS
ORA-39127: unexpected error from call to export_string :=SYS.DBMS_CUBE_EXP.schema_info_exp('SCOTT',1,1,'11.01.00.06.00',newblock)
ORA-37111: Unable to load the OLAP API sharable library: (The specified module could not be found.
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 205
ORA-06512: at "SYS.DBMS_CUBE_EXP", line 280
ORA-06512: at line 1
ORA-06512: at "SYS.DBMS_METADATA", line 5980
. . exported "SCOTT"."DEPT" 5.945 KB 4 rows
. . exported "SCOTT"."EMP" 8.585 KB 14 rows
. . exported "SCOTT"."SALGRADE" 5.875 KB 5 rows
. . exported "SCOTT"."ACCTYPE_GL_MAS" 0 KB 0 rows
. . exported "SCOTT"."BONUS" 0 KB 0 rows
Master table "SYSTEM"."SYS_EXPORT_SCHEMA_01" successfully loaded/unloaded
Dump file set for SYSTEM.SYS_EXPORT_SCHEMA_01 is:
D:\APP\ADMINISTRATOR\ADMIN\SIPDB\DPDUMP\SCORR.DMP
Job "SYSTEM"."SYS_EXPORT_SCHEMA_01" completed with 2 error(s) at 13:40:08
Please help me to resolve this issue.
Thank you,
Shan

Hi Shan,
I am getting very similar to yours
"ORA-37111: Unable to load the OLAP API sharable library: (The specified module could not be found."
error message while creating OLAP Analytic Workspace with AWM.
I am creating workspace for the first time, actually following some tutorial to get some knowledge about OLAP)
I see you managed to solve you problem.
I wonder how I can get this MOS DOC 852794.1 - is it possible to get it without going to Metalink?
Thanks in advance for any help.
Regards,
SC

Error 500--Internal Server Error From RFC 2068 Hypertext Transfer Protocol

We are encountering the following error while navigating the dashboards/ reports through OBIEE: "Error 500--Internal Server Error From RFC 2068 Hyperion Transfer Protocol"
While navigating from one dashboard page to another this error is encountered or we get kicked out of the session and need to log back in.
Any one experienced the same before?

Thanks Srini.
They issue we are facing is not post-installation specific. The environment functions fine but when we navigate dashboard pages, then this error pops up. It is intermittent and applicable to certain dashboards and reports. Not sure if you have ever encountered the dashboard/ report design causing this?
Ganesh

Transport error from dev to quality

HI,
I am getting following error from Dev system to Quality while transporting the request please suggest me the solution.
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Activation Mode
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Activation Mode
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Activation Mode
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Activation Mode
Start of the after-import method RS_ISTS_AFTER_IMPORT for object type(s) ISTS (Delete Mode)
Start of the after-import method RS_ISMP_AFTER_IMPORT for object type(s) ISMP (Delete Mode)
Start of the after-import method RS_ISCS_AFTER_IMPORT for object type(s) ISCS (Delete Mode)
Start of the after-import method RS_ISTD_AFTER_IMPORT for object type(s) ISTD (Delete Mode)
Start of the after-import method RS_RSFO_AFTER_IMPORT for object type(s) RSFO (Delete Mode)
Errors occurred during post-handling RS_AFTER_IMPORT for ISCS L
The errors affect the following components:
    BW-WHM (Warehouse Management)
Post-import methods of change/transport request completed
      Start of subsequent processing ... 20100409231713
      End of subsequent processing... 20100409231716
Thanks,
kranti

Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Activation
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKNUM is not available in version A
InfoObject ZCHKDATE is not available in version A
Inconsistencies found while checking DataStore object ZTCM_D02
Start of the after-import method RS_ODSO_AFTER_IMPORT for object type(s) ODSO (Delete Mode
Errors occurred during post-handling RS_AFTER_IMPORT for ODSO L
The errors affect the following components:
   BW-WHM (Warehouse Management)
Post-import methods of change/transport request D21K918324 completed
     Start of subsequent processing ... 20091112090953
     End of subsequent processing... 20091112090954
can u please post complete error message that ur getting
in the above one the DSO is sent to quality but without infoobjects in Quality
so the tranport got failed

"****Error from PSA****" error message when loading InfoCube

Hi all,
I am getting the following error message when loading transaction data to an InfoCube.
***Error from PSA***
This is not MD or Hierarchies (like previous messages in the forum)
Please advise.
Thanks,
Miki

Hi Miki,
Before just loading data into the infocube. Catchup PSA table and see the data into it.
Then u may find the solution.
But as ronald said this shouldnot be the complete error statement.
bye.

Error in Action when CRM Order is updated as Error from R/3 update

Hi,
Currently we are in CRM 6.0 SP04 and R/3 4.7 SP14
Process:
1) B2B user places order through ISA
2) Order gets replicated R/3 from CRM through middleware (Scenario A setting)
3) If there are any changes in order on either side, changes gets replicated.
Requirement:
We have a requirement from business to trigger workflow in CRM if order is in error. Following are the possible scenarios
1) Error while saving order in CRM
2) No errors in CRM. However, Order will get error in R/3 because of inconsistent configuration or master data between CRM and R/3. The BDOC will be green while replicating to R/3 and acknowledgement to CRM.
3) BDOC status is in error
Solution approach:
We created an action to trigger event when order status set to "Contains error". The condition for Action trigger are Order have error free flag NE X(BUS 2000115 ) OR Status = I1030 OR status = I1056.
Issues:
1) Scenario : Order is successfully create in CRM without any error. Order gets replicated to R/3 u2013 BDOC is green. However, the order gets error status in R/3 because of inconsistent configuration or master data. The acknowledgement BDOC updates the error status in CRM. However, Action does not get trigger when the order is updated as Error from R/3.
Pls advise possible solution and also suggest any other way to achieve the required functionality to generate workflow for CRM order updated as Error from R/3.
Regards,
Anil Rithe

Hi Anil,
Try this, implement ORDER_SAVE BAdI. This BAdI is triggered every time an order is saved, you could put in your logic to see if the order has errors, if yes trigger your workflow.
I haven't tested but this should work for your case when the crm order is set to error status after the replication to R/3(the BDOC scenario).
This may not be the most efficient method of doing, but this would definitely work.
Make sure you use proper checks at the beginning of your order_save BAdI implementation as this badi would get executed on save of every 1-order object.
~Kiran

Error from the session log between Informatica and SAP BI

HI friends,
      I am working extraction from bi by Informatica 8.6.1.
      now, I start the process Chain from bi, and I got a error from Informatica's session log.Pls help me to figure out what's going on during me execution.
Severity     Timestamp     Node     Thread     Message Code     Message
INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6228     Writing session output to log file [D:\Informatica\PowerCenter8.6.1\server\infa_shared\SessLogs\s_taorh.log].
INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6014     Initializing session [s_taorh] at [Fri Dec 17 11:01:31 2010].
INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6683     Repository Name: [RepService_dcinfa01]
INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6684     Server Name: [IntService_dcinfa01]
INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6686     Folder: [xzTraining]
INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6685     Workflow: [wf_taorh] Run Instance Name: [] Run Id: [43]
INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6101     Mapping name: m_taorh.
INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6964     Date format for the Session is [MM/DD/YYYY HH24:MI:SS.US]
INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     TM_6703     Session [s_taorh] is run by 32-bit Integration Service [node01_dcinfa01], version [8.6.1], build [1218].
INFO     2010-12-17 11:01:31     node01_dcinfa01     MANAGER     PETL_24058     Running Partition Group [1].
INFO     2010-12-17 11:01:31     node01_dcinfa01     MANAGER     PETL_24000     Parallel Pipeline Engine initializing.
INFO     2010-12-17 11:01:31     node01_dcinfa01     MANAGER     PETL_24001     Parallel Pipeline Engine running.
INFO     2010-12-17 11:01:31     node01_dcinfa01     MANAGER     PETL_24003     Initializing session run.
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     CMN_1569     Server Mode: [UNICODE]
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     CMN_1570     Server Code page: [MS Windows Simplified Chinese, superset of GB 2312-80, EUC encoding]
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     TM_6151     The session sort order is [Binary].
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     TM_6156     Using low precision processing.
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     TM_6180     Deadlock retry logic will not be implemented.
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     SDKS_38029     Loaded plug-in 300320: [PowerExchange for SAP BW - OHS reader plugin 8.6.1 build 183].
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     SDKS_38024     Plug-in 300320 initialization complete.
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     PCCL_97003     [WARNING] Real-time session is not enabled for source [AMGDSQ_IS_TAORH]. Real-time Flush Latency value must be 1 or higher for a session to run in real time.
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     SDKS_38016     Reader SDK plug-in intialization complete.
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     TM_6307     DTM error log disabled.
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     TE_7022     TShmWriter: Initialized
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     TM_6007     DTM initialized successfully for session [s_taorh]
INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     PETL_24033     All DTM Connection Info: [<NONE>].
INFO     2010-12-17 11:01:31     node01_dcinfa01     MANAGER     PETL_24004     PETL_24004 Starting pre-session tasks. : (Fri Dec 17 11:01:31 2010)
INFO     2010-12-17 11:01:31     node01_dcinfa01     MANAGER     PETL_24027     PETL_24027 Pre-session task completed successfully. : (Fri Dec 17 11:01:31 2010)
INFO     2010-12-17 11:01:31     node01_dcinfa01     DIRECTOR     PETL_24006     Starting data movement.
INFO     2010-12-17 11:01:31     node01_dcinfa01     MAPPING     TM_6660     Total Buffer Pool size is 1219648 bytes and Block size is 65536 bytes.
INFO     2010-12-17 11:01:31     node01_dcinfa01     READER_1_1_1     OHS_99013     [INFO] Partition 0: Connecting to SAP system with DESTINATION = sapbw, USER = taorh, CLIENT = 800, LANGUAGE = en
INFO     2010-12-17 11:01:32     node01_dcinfa01     READER_1_1_1     OHS_99016     [INFO] Partition 0: BW extraction for Request ID [163] has started.
Edited by: bi_tao on Dec 18, 2010 11:46 AM

INFO     2010-12-17 11:01:33     node01_dcinfa01     WRITER_1_*_1     WRT_8167     Start loading table [VENDOR] at: Fri Dec 17 11:01:32 2010
INFO     2010-12-17 11:01:33     node01_dcinfa01     WRITER_1_*_1     WRT_8168     End loading table [VENDOR] at: Fri Dec 17 11:01:32 2010
INFO     2010-12-17 11:01:33     node01_dcinfa01     WRITER_1_*_1     WRT_8141
Commit on end-of-data Fri Dec 17 11:01:32 2010
===================================================
WRT_8036 Target: VENDOR (Instance Name: [VENDOR])
WRT_8044 No data loaded for this target
INFO     2010-12-17 11:01:33     node01_dcinfa01     WRITER_1_*_1     WRT_8143
Commit at end of Load Order Group Fri Dec 17 11:01:32 2010
===================================================
WRT_8036 Target: VENDOR (Instance Name: [VENDOR])
WRT_8044 No data loaded for this target
INFO     2010-12-17 11:01:33     node01_dcinfa01     WRITER_1_*_1     WRT_8035     Load complete time: Fri Dec 17 11:01:32 2010
LOAD SUMMARY
============
WRT_8036 Target: VENDOR (Instance Name: [VENDOR])
WRT_8044 No data loaded for this target
INFO     2010-12-17 11:01:33     node01_dcinfa01     WRITER_1_*_1     WRT_8043     ****END LOAD SESSION****
INFO     2010-12-17 11:01:33     node01_dcinfa01     WRITER_1_*_1     WRT_8006     Writer run completed.
INFO     2010-12-17 11:01:33     node01_dcinfa01     MANAGER     PETL_24031
RUN INFO FOR TGT LOAD ORDER GROUP [1], CONCURRENT SET [1] *****
Thread [READER_1_1_1] created for [the read stage] of partition point [AMGDSQ_IS_TAORH] has completed. The total run time was insufficient for any meaningful statistics.
Thread [TRANSF_1_1_1] created for [the transformation stage] of partition point [AMGDSQ_IS_TAORH] has completed. The total run time was insufficient for any meaningful statistics.
Thread [WRITER_1_*_1] created for [the write stage] of partition point [VENDOR] has completed. The total run time was insufficient for any meaningful statistics.
INFO     2010-12-17 11:01:33     node01_dcinfa01     MANAGER     PETL_24005     PETL_24005 Starting post-session tasks. : (Fri Dec 17 11:01:33 2010)
INFO     2010-12-17 11:01:33     node01_dcinfa01     MANAGER     PETL_24029     PETL_24029 Post-session task completed successfully. : (Fri Dec 17 11:01:33 2010)
INFO     2010-12-17 11:01:33     node01_dcinfa01     MAPPING     SDKS_38025     Plug-in 300320 deinitialized and unloaded with status [-1].
INFO     2010-12-17 11:01:33     node01_dcinfa01     MAPPING     SDKS_38018     Reader SDK plug-ins deinitialized with status [-1].
INFO     2010-12-17 11:01:33     node01_dcinfa01     MAPPING     TM_6018     The session completed with [0] row transformation errors.
INFO     2010-12-17 11:01:33     node01_dcinfa01     MANAGER     PETL_24002     Parallel Pipeline Engine finished.
INFO     2010-12-17 11:01:33     node01_dcinfa01     DIRECTOR     PETL_24013     Session run completed with failure.
INFO     2010-12-17 11:01:34     node01_dcinfa01     DIRECTOR     TM_6022
SESSION LOAD SUMMARY
================================================
INFO     2010-12-17 11:01:34     node01_dcinfa01     DIRECTOR     TM_6252     Source Load Summary.
INFO     2010-12-17 11:01:34     node01_dcinfa01     DIRECTOR     CMN_1537     Table: [AMGDSQ_IS_TAORH] (Instance Name: [AMGDSQ_IS_TAORH]) with group id[1] with view name [Group1]
      Rows Output [0], Rows Affected [0], Rows Applied [0], Rows Rejected[0]
INFO     2010-12-17 11:01:34     node01_dcinfa01     DIRECTOR     TM_6253     Target Load Summary.
INFO     2010-12-17 11:01:34     node01_dcinfa01     DIRECTOR     CMN_1740     Table: [VENDOR] (Instance Name: [VENDOR])
      Output Rows [0], Affected Rows [0], Applied Rows [0], Rejected Rows [0]
INFO     2010-12-17 11:01:34     node01_dcinfa01     DIRECTOR     TM_6023
===================================================
INFO     2010-12-17 11:01:34     node01_dcinfa01     DIRECTOR     TM_6020     Session [s_taorh] completed at [Fri Dec 17 11:01:33 2010].

Annoying errors from EMGC

Similar Messages

Maybe you are looking for