Annoying Print Issue - "Multiple files are bound...."

Anyone know how to disable the extra page that prints with PDF packages that's titled "Multiple files are bound together in this PDF package"?
Basically, when I print out the documents that are packaged, this page prints out first - and it's very annoying...
I am using Acrobat 8 Pro, so, it can't be a version issue.. also does this printing from Acrobat Reader 9...
Thanks for any help in this.
Jill

I found something that seems to address the issue we were having.
"In Acrobat v8, you can choose to create a PDF Package that allows you to choose whether to use a default cover sheet or use the first PDF file (in it's entirety) as the cover sheet. In Acrobat v9, it no longer appears to be an option to choose a cover sheet - the default cover sheet is ALWAYS part of the portfolio."
I have Adobe 8 Pro and have tried it and it worked like a charm for me.
The steps I followed are were: File> Combine Files> Add Files (select all files to be added to the PDF Package)> Next> select Assemble Files into a PDF Package (be sure the document you want as the "cover page" is the 1st one listed, if not, "Move Up")> Select Cover Sheet (in the lower right of the window) select "Use First Document"> Create> Save.
After following these steps, you will find the Cover Sheet is the 1st part of your PDF Package and the rest will be listed to the left. When you Print All Documents, you will no longer get the "Multiple files are bound together in this PDF Package" cover sheet beforehand.

Similar Messages

Multiple files are bound together in this PDF Package. Adobe recommends using Adobe Reader or Adobe.

Multiple files are bound together in this PDF Package.
Adobe recommends using Adobe Reader or Adobe Acrobat version 8 or later to work with documents contained within a PDF Package. By updating to the latest version, you’ll enjoy the following benefits:
• Efficient, integrated PDF viewing • Easy printing
• Quick searches
Don’t have the latest version of Adobe Reader?
Click here to download the latest version of Adobe Reader
If you already have Adobe Reader 8, click a file in this PDF Package to view it.
Get this message when trying to open some docs. Link goes nowhere and nothing to click on.

When you use Acrobat to convert emails it makes a special kind of PDF called a PDF package. This cannot be viewed on iOS and never will be able to be. I don't think Adobe really thought it through...

How to open a pdf package in browser when multiple files are bound together.

Hi,
I have to open a pdf package in browser that contains multiple pdf files any suggestions will help me a lot.
Thanks.

It shows me a page says "Multiple files are bound together in this PDF package"

How to tell if multiple files are selected when they are opened in windows

Hello, can someone help me, my question is how to tell if multiple file selections were made when they were opened (right-click->open). Through modifying the registry I already have my Java program start up when a file with specific extension is double-clicked.
The problem is when multiple files are opened at the same time, an instance of java program is created and run for each of the selected files. Ideally I would like it so that only one instance of java program is run, regardless of the number of selections.
When you try it with Microsoft media player or winamp for example, it seems that only one process is created and run (I don't see many processes spawning when I watch it using task manager). Maybe this is more of Windows issue rather than Java programming issue. Any help is appreciated.

If anybody wants to know, this can be solved by either 1) using DDE 2) using DropTarget (from Windows) 3) make a light-weight EXE dispatcher (eg. in C), and use file to have IPC between the dispatcher (which gets the filepath for each of the selections) and the java program. There can be other methods of course. Using the second option is the simplest but it requires WinXP and higher. I implemented it using option 3.. the downside of this is there's a warning message pop up when trying to open many (>20?) files at the same time by Windows. However, option 1 'seems' to have the same limitation. Having a java program created each time for each of the selections seems to be too slow, for viable option.

File corruption on SDCard when multiple files are being written from WinCE 6.0R3

We currently have file corruption problems which we have been able to reproduce on our system which uses WinCE 6.0R3. We have an SDCard in our system which is mounted as the root FS. When multiple files are being written to the file system we occasionally
see file corruption with data destined from one file, ending up in another file, or in another location in the same file. We have already written test SW that we have been able to use to reproduce the problem, and have worked with the SDCard vendor to
check that the memory controller on the card is not the source of the problems.
We know that the data we send to WriteFile() is correct, and that the data which eventually gets sent through the SDCard driver to the SD card is already corrupted.
We believe that the problem is somewhere in the microsoft private sources between the high level filesystem API calls and the low level device calls that get the data onto the HW.
We have confirmed that the cards that get corrupted are all good and this is not a case ofpoor quality flash memory in the cards. The same cards that fail under WinCE 6.0R3 never fail under the same types of testing on Windows, Mac OX, or linux. We
can hammer the cards with single files writes over and over, but as soon as multiple threads are writing multiple files it is only a matter of time before a corruption occurs.
One of the big problems is that we are using the sqlcompact DB for storing some data and this DB uses a cache which get's flushed on it's own schedule. Often the DB gets corrupted because other files are being written when the DB decides to flush.
So we can reproduce the error (with enough time), and we know that data into the windows CE stack of code is good, but it comes out to the SDcard driver corrupted. We have tried to minimize writes to the file system, but so far we have not found a
way to make sure only one file can be written at once. Is there a setting or an API call that we can make to force the OS into only allowing one file write at a time, or a way of seeing how the multiple files are managed in the private sources?
Thanks
Peter

All QFE's have been applied we are building the image so we have some control.
I have build an image which used the debug DLL's of the FATFS and I have enabled all of the DebugZones. The problem is still happening. From the timings in the debug logs and the timestamps in the data which corrupts the test file I have been able
to see that the file is corrupted AFTER the write is complete. Or at least that's how it seems.
We finished writing the file and closed the handle. Then more data is written to other files. When we get around to verifying the file it now contains data from the files that were subsequently written.
What I think I need to do is figure out in detail how the two files were "laid down" onto the SDCard. If the system used the same cluster to write the 2 files then that would explain the issue.

InDesign keeps crashing on type tool/when multiple files are opened??

I've 'trashed' my preferences, updated both Suitcase 3 and CS5 to the latest updates...and still having issues. Just constant crashing whenever I open multiple files, or as soon as I enter a text box to make edits.
Here's my two crash reports:
pastebin.com/Q3LeHAZ7
http://pastebin.com/3pSxgUvN
And a sample process:
http://pastebin.com/DDCGyEG1
Any advice would be greatly appreciated! Thanks!

Hmm yes, I've just had my first crash of the day - tried to package a file and it froze when copying the font files over.
Well, that does seem a plausible summary of what is happening. Your crash report is of particular interest, because it doesn't really implicate InDesign:
Thread 34 Crashed:
0   com.apple.CoreFoundation           0x91f6f65f _CFURLIsFileURL + 15
1   com.apple.CoreFoundation           0x91fd2a80 CFURLSetResourcePropertiesForKeys + 32
2   com.apple.DesktopServices          0x90bc6af0 TCopyWriter::WriteDates() + 990
3   com.apple.DesktopServices          0x90bc639f TCopyWriter::WriteExtendedAttributes() + 357
4   com.apple.DesktopServices          0x90bc00f3 TCopyWriter::Write() + 185
5   com.apple.DesktopServices          0x90bbf9d5 TCopyWriter::WriteTaskProc(void*) + 75
6   ...ple.CoreServices.CarbonCore     0x9294254a PrivateMPEntryPoint + 68
7   libSystem.B.dylib                  0x90a06259 _pthread_start + 345
8   libSystem.B.dylib                  0x90a060de thread_start + 34
so, that is a crash in Apple code. Now, of course, the apple code was called from InDesign, and there's a certain degree of garbage-in-garbage-out. If you ask the operating system to copy a nonexistent file to a nonexistent device, it might crash. It shouldn't but it might.
And if we look at thread 0, which is InDesign code, we can sort of see where InDesign invoked the operating system:
Thread 0: Main Thread Dispatch queue: com.apple.main-thread
0   libSystem.B.dylib                  0x90a06aa2 __semwait_signal + 10
1   libSystem.B.dylib                  0x90a0675e _pthread_cond_wait + 1191
2   libSystem.B.dylib                  0x90a083f8 pthread_cond_wait$UNIX2003 + 73
3   ...ple.CoreServices.CarbonCore     0x9297721e TSWaitOnCondition + 126
4   ...ple.CoreServices.CarbonCore     0x92962b68 TSWaitOnConditionTimedRelative + 202
5   ...ple.CoreServices.CarbonCore     0x9295e533 MPWaitOnQueue + 250
6   com.apple.DesktopServices          0x90bc730b TCopyQueue::WaitOnRecordDone() + 55
7   com.apple.DesktopServices          0x90bc1287 TCopyReader::GetNextItem() + 875
8   com.apple.DesktopServices          0x90bbfdf6 TCopyReader::Read(unsigned long long, TCountedPtr<TCFURLInfo> const&, TCountedPtr<TCFURLInfo> const&) + 164
9   com.apple.DesktopServices          0x90bf64e3 TFSCopyOperation::CopyToTarget() + 613
10 com.apple.DesktopServices          0x90bf9228 TFSCopyOperation::DoCopy(TCountedPtr<TCFURLInfo> const&) + 780
11 com.apple.DesktopServices          0x90bf9898 TFSCopyOperation::Run() + 174
12 com.apple.DesktopServices          0x90bee5e9 _NodeOperation + 438
13 ...ple.CoreServices.CarbonCore     0x929c2090 _FSOperateOnObjectSync + 352
14 ...ple.CoreServices.CarbonCore     0x929c228f _FSPathOperateOnObjectSync + 210
15 AdobeAFL                           0x016e9101 adobe::afl::CoreFileUtils::CopyFile(adobe::afl::AFile const&, adobe::afl::AFile const&, bool) + 365
16 PublicLib.dylib                    0x014339da FileLinkResourceHandler::CopyToFile(UIDRef const&, URI const&, IDFile&) const + 58
17 com.adobe.InDesign.Links           0x21c54c4e 0x21bd8000 + 511054
So, where does that leave us? Well, we would like to know what file is being copied, and why the file copy operation caused the operating system to crash the program.
Are you sure it was a font? Could it have been copying another linked file?
I don't suppose you have any folks around the office who know their way around Apple's Xcode tools, that are used for developing Objective C applications? There are some ways to figure out what file is causing InDesign to crash, but they're all kind of cryptic and annoying to explain without doing it in person...
If not, let me know and I'll try to figure out a simple way to explain it... (and to figure out which of the cryptic tools are the best ones to recommend for this situation. A question that might take me some time to answer....)

In oracle B2B multiple files are getting picked from SFTP location for one file in custer environment

Flow is like :
REST ENDPOINT->OSB PROXYSERVICE->BUSINESS SERVICE->B2B SFTP LOCATION->B2B->SOA JMS Queue->SOA COMPOSITE-
Due to cluster environment, there is issue when B2B picks the file from SFTP location for Custom protocol using sftp listening channel. Sometimes B2B picks multiple files from SFTP location for just one copy of file. It is happening because of cluster environment 4 instances of server is looking into the SFTP location for picking the file and sometime 2 or more instances of server are reading same file and sending the copy to B2B.
Please let me know , how can I stop this behavior

All QFE's have been applied we are building the image so we have some control.
I have build an image which used the debug DLL's of the FATFS and I have enabled all of the DebugZones. The problem is still happening. From the timings in the debug logs and the timestamps in the data which corrupts the test file I have been able
to see that the file is corrupted AFTER the write is complete. Or at least that's how it seems.
We finished writing the file and closed the handle. Then more data is written to other files. When we get around to verifying the file it now contains data from the files that were subsequently written.
What I think I need to do is figure out in detail how the two files were "laid down" onto the SDCard. If the system used the same cluster to write the 2 files then that would explain the issue.

Exceedinly Annoying Printing Issues

I need to print out several copies of a particular PDF file. It works perfectly in windows, so it is most definitely not a printer problem.
This is the PDF file: https://sites.google.com/a/eng.ucsd.edu … edirects=0 . Let me know if that's inaccessible.
First, I tried printing in evince. A large number of the thin lines are printed far thicker than the thicker lines. This is unacceptable. It is visible in the print preview window as well as when the file is printed directly to PDF.
Next, I tried okular and LPR with the PDF directly. Both produced prints that rendered the arcs as line segments. This is even less acceptable than the previous failure mode.
After that, I tried pdf2ps followed by evince, okular, and lpr. All three methods resulted in a chart that was shifted up and to the right, cutting off some of the chart on the right side, followed by a blank page and a page with the following text:
ERROR:
rangecheck
OFFENDING COMMAND:
.installpagedevice
STACK:
--nostringval--
--nostringval--
--nostringval--
I also tried using lpr with the pdf2ps output file in raw mode, but that printed out one page with some postscript on it followed by lots and lots of blank pages until I cancelled the job at the printer itself.
First question, what sort of workaround do I need to print this dang thing?
Second question, who do I need to submit bug reports to so this actually might have a remote chance of possibly getting maybe fixed? I had similar problems under Ubuntu, so it's not arch specific. I'm assuming the first issue is in poppler. I'm not sure about the other two, though.
Last edited by alex.forencich (2011-10-14 23:29:05)

@nico1301
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

Robohelp issues (folders & files are missing)

Hi there,
We're running Robohelp 7 HTML.
We have 3 users using this product. All client PCs are running Windows XP (fully patched). They access their Robohelp project/documentation on a Windows 2003 dev server (also fully patched).
Robohelp was working fine until several days ago. At this point, our users starting receiving Microsoft Visual C++ runtime errors & complained that they could no longer edit their files. Additionally, the .xpj file was missing. If it matters, there are 1774 files & 67 folders in the project. The project itself is only 38MB.
After checking the server logs, I realized that several 'old' office updates were pushed to the server the night before. After further investigation, it looked like KB904018 was the guilty update (more info here -> http://www.microsoft.com/downloads/details.aspx?FamilyId=7497D7F0-BEF5-4054-B854-B1240B513 5F5&displaylang=en). Basically, this update removes the functionality in Access 2002 that lets users add new data to or edit existing data in a linked Microsoft Excel worksheet. Figuring that was the culprit, we uninstalled the update (normally we don't do this but it isn't a critical update).
After rebooting the server, we ran a full restore (which included the .xpj file), Robohelp started working again & everyone was happy.
Several days later however, we started receiving complaints again. This time some of the directories & files within the Robohelp project had disappeared. I've double-checked the server logs, client logs, AV settings (on server & client), etc, but I don't see anything relevant. At this point I'm not sure what to do but I'm guessing there's some kind of corruption in the project now. What should I be looking at? Any advice/suggestions are greatly appreciated.
TIA
Regards,
VeetsDavis
ps: I've never worked with Robohelp before so forgive my ignorance

You mean what source control product? I am the last person to ask as I studiously avoid it.
First of all, do any of the users work on the same project at the same time? If not, then source control is not essential from that point of view. The way we work is that each day a simple backup program creates a zip on the network while we are updating a project. When complete a clearly labelled zip is put on the network. That ensures there are good backups at all times. From time to time we trash a bunch of zips so that there is say one per month retained. We don't trust you IT guys as whenever we have asked for a backup, somehow it's going to take too long, the tape isn't available etc etc.
I would guess you don't have multiple authors on a project at any one time as without source control you would have hit problems before now.
If you must have source control, why not use the source control that comes with RH? It installs from the same CD.
Bear in mind that the author checks out files to work on them and if they do not check them back in at the end of the day, there is no backup of the topics checked out.
See www.grainge.org for RoboHelp and Authoring tips
Follow me @petergrainge

ID3 Printing issue-multiple pages per sheet mirror image printing

So, like the title says, I'm trying to print 4 up per sheet out of ID CS3. The first page prints fine, but all pages that follow print as mirror images. I have gone through all the print settings for InDesign and specific to the printer (Xerox 7665) to make sure that flip and mirror print is not on. Still, it keeps printing every page aside from the first mirrored. Any ideas?

A friend of mine rang me last week with a similar problem. I didn't know what to say, it was every page after the first one printed upside down.
To me that can't happen, they should all send at the same orientation.
Perhaps you need to update your printer drivers. But to me it sounds like an issue with your printer and not InDesign.
As another test
Go to File>Print and the advanced menu and choose Print as Bitmap
I'm not sure what that will prove though?

Another issue InMyQ files are root owned

I have noticed that inMyQ files under service/dbms/work are owned by root....this was causing the dbms service not to start during install because j2eeadm should have owned the files.....is this correct?
Thanks
John Ryan

All the files in the usr/sap directory should be owned by j2eeadm. You may have started the portal as root once, and this is known to cause these type of permission issues. I believe that the solution has already been posted in this forum.
Regards,
Kyle Lawrence

ZIP File has damaged contents - Multiple file download

Hi,
I am using ZIP API in Web Dynpro JAVA for multiple file download scenario.
Issue:--->
Some files are not opening correctly after unzipping the ZIP file.
Example-1: some PDF files gives out message that " "
Example-2: Also, a JPG file shows only upper half of the image.
So in all, the content of generated ZIP file are damaged.
Any idea why this is happening?
Thanks & regards,
Amey

And this is the code I'm using:-
Unzipped PDF files give this error --> There was an error opening this document. The file is damaged and could not be repaired
for(int i = 0; i < l_int_NodeSize; i++){
     g_SearchOutputEle = g_SearchOutputNode.getCtx_vn_SearchOutputElementAt(i);
     java.net.URL url = new URL(g_SearchOutputEle.getFileUrl());
     java.net.URLConnection urlConnection = url.openConnection();
     java.io.InputStream inputStream = url.openStream();
     int arraySize = urlConnection.getContentLength();
     byte[] byteArray = new byte[arraySize];
     DataInputStream dis = new DataInputStream(inputStream);
     dis.read(byteArray);
     ZipEntry zipEntry = new ZipEntry("Name-"+i);
     zipEntry.setSize(byteArray.length);
     zos.putNextEntry(zipEntry);
     zos.write(byteArray);
     zos.closeEntry();
zos.close();
byte[] byteOutArray = baos.toByteArray();
IWDResource resource = WDResourceFactory.createResource(byteOutArray, "Downloads.zip",WDWebResourceType.UNKNOWN);
String urlString = resource.getUrl(WDFileDownloadBehaviour.ALLOW_SAVE.ordinal());
IWDWindow win_MultiFileWindow = wdComponentAPI.getWindowManager().createNonModalExternalWindow(urlString);
win_MultiFileWindow.setWindowSize(0,0);
win_MultiFileWindow.show();
Edited by: Amey Mogare on Mar 30, 2010 7:49 AM

Problem of Creating Multiple Communication channels for multiple files

Hi Everybody
I have a very basic doubt but this struck me...
For a file-XI-file scenario,if multiple files are coming from same FTP server but with different names then we have to create multiple communication channels for all the files of different names..but is this a intelligent approach?Can we do something so that only one communication channel can receive multiple files of different names?plz explain in detail if possible ASAP.
I have another doubt as in File-XI-File scenario how the XI understands that a particular file is from this FTP server needs to be send to another particular FTP Server?is it only the name of the file which we give in sender comm channel & receiver comm chaneel which determines this????that means this name should always be same?plz explain in detail if anybody knows?

Thanks Aamir.I understood the solution.
Correct me if I am wrong.......
1)If there are multiple files with different names & different extensions in the sender FTP then we use-->
2)if there are multiple files with different names & different extensions in sender FTP & I want only say files of 2 extension types(say .xml & .txt)then we use-->
*.xml
in one comm channel &
*.txt
in another comm channel rite??
Also I wanted to ask that only two kinda files we can pick up through sender comm channel rite?
.xml and .txt(File content Conversion).Can we pick files of other extensions also?(say .doc,.xls)If we use as u said
then files of all other extensions will also be picked up rite?bt hw will xi convert them into xml?plz explain......
One of my other q is not answered yet.........all these same doubts are there for receiver communication channel.......but you all have not said nething abt the receiver comm channel........plz explain the answers to all these queries for receiver comm channel for a receiver FTP........ASAP......thanks once again.......

Printing multiple files

I have an iMac G5 running Tiger 10.4.3.
My issue is that when I print multiple files from within a folder, the the files are not printed alphabetically by the file name. It appears printing multiple files is completely random, since I have been unable to discern any pattern.
Does anyone know of a way to set the print order in the queue?

Welcome to Apple Discussions!
What if you view the files alphabetically in the Finder, and drag them into the Printer Utility that manages the queue?

Open and print multiple files from the Finder all at once.

I'm trying to research how to do this. In OS9 you used to be able to hi-lite multiple files (Word files for example) and just hit Command+P. This would automatically open all of the files AND print them.
I can't seem to do this in my OS X. Or can I? I can hi-lite and go to File/Print, but the computer is only opening but not printing.
Any suggestions??
iMac Mac OS X (10.4.8)

I don't know how to both "open and print" multiple files in one step. The ⌘O combination of course will open multiple items. The items remain selected so switching back to the "Finder" and dragging multiple icons onto the icon for "/Applications" > "Utilities" > "Printer Setup Utility.app" seems to cause them all to be printed to the default printer.
Alternatively, a user's "~/Library/Printers" folder contains printer icons -- I'm not sure what they are exactly, but they represent the printers set up for that account. They function pretty much like the pre-OS X "Desktop Printer" icons so dragging and dropping multiple files onto them should cause them to be printed. It may even be possible to create aliases to them on the "Desktop" to recreate "Desktop Printer" functionality. But again, this won't open the files into their applications.

Annoying Print Issue - "Multiple files are bound...."

Similar Messages

Maybe you are looking for