Anonymous WPC access

Hi,
I'm setting up WPC for anonymous access. For this reason a role was created and WPC navigation is attached to it with an external connector. This role is added to the Guest user.
The Guest user is accessing the page and is able to see the WPC navigation, but in the content area where the web page should be displayed a Login window appears instead. Permissions have been assigned correspondingly to SAP NW Library (http://help.sap.com/saphelp_nw2004s/helpdata/en/47/1da38afe214405e10000000a1553f6/frameset.htm).
Thanks!
Regards,
Ingo

Hi,
Check out this link and see if it helps.
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e06e2dfa-7759-2b10-1c89-e90e6877e606

Similar Messages

Anonymous user access site central admin?

Anonymous user access site central admin?

Hi,
you need to adjust the context, check this
http://blogs.msdn.com/b/sowmyancs/archive/2008/08/14/spsecurity-runwithelevatedprivileges-an-important-point-while-using-it-in-web-context.aspx
http://sharepoint.stackexchange.com/questions/46194/sharepoint-2010-runwithelevatedprivileges-throws-exception
SPSecurity.RunWithElevatedPrivileges(delegate()
using (SPSite elevatedSite = new SPSite(SPContext.Current.Site.Id))
using (SPWeb elevatedWeb = elevatedSite.OpenWeb(SPContext.Current.Web.Id))
// Perform administrative actions by using the elevated site and web objects.
// elevatedWeb.CurrentUser.LoginName gives SHAREPOINTsystem
Kind Regards,
John Naguib
Senior Consultant
John Naguib Blog
John Naguib Twitter
Please remember to mark this as answered if it helped you

Anonymous User Access to Web Dynpro ABAP Application

Dear All,
I'm not able to set anonymous user access to a WDA application. The requirement is : I have to Call the application if the user clicks a link on the portal (even before logging).
Please note that I have gone thru note No. 1020795 and 1031159 and have complied and followed all the given steps there.
Also, I have given anonymous acces to iveiw that i had created.
Request the gurus around to help, if they have cracked a similiar situation.
PS : Points are up for grab for any positive helps provided.
Thankx a Ton in advance.
Regds,
Srini

Hi, Srini,
A WDA application runs on the WAS. It needs to login to the ABAP core in order o execute. In your case, what you can do is supply a user/passord directly on the service (tcode SICF).
Hope this helps!
Regards,
Andre

EA4500 and Non-Anonymous Disk Access

Purchased an EA4500 this weekend and overall it's working well. Running into what seems like a bug however with the NAS settings in firmware 2.0.37. If I enable "anonymous disk access" I can use the attached USB hard drive no problem, as soon as I turn off that setting and try to setup a user it's a no-go. Windows 7 reports that the device can not be found, and in fact the icon for it will immediately disappear from the list of network devices within a few seconds of changing the radio button and clicking "save".
It's behaving as if it's in a different workgroup than the PC's. I just have the workgroup set to the Windows 7 default of "WORKGROUP" and have the EA4500 set to the same.
Is this a known bug with this device and firmware combination, or am I missing something obvious?

Jake_2.0 wrote:
By default, Anonymous Disk Access specify whether users have read-and-write or read-only access to the folder. How about if you try to map the netework drive after disabling that feature and see if the harddrive will be detected.
That's incorrect. When it is enabled, users on the LAN can access the drive without having to enter in the credentials of one of the accounts set up in the router.
When it's disabled, then users have to enter in the correct credentials of one of the registered accounts to be able to access the drive.
The read/write access in parentheses which you are referring to is meant to make users aware what privileges an anonymous user will have.
I don't work for Cisco. I'm just here to help.

Ldap anonymous directory access

I have a PCI vulnerability titled "LDAP Anonymous Directory Access permitted" which I need to fix. I disabled anonymous binds in the props of the ldap server object in question. However I guess this was not the fix.
Is there a difference between anonymous binds and anonymous directory access? I was being told this is my problem - that bind is different than directory access so I fixed the wrong thing. I thought ldap was the directory access protocol, and bind was the connection being made to the directory using ldap. Ok. I'll quit typing now. any help is appreciated.
Stacie White

I would recommend this forum: novell.support.edirectory.netware
Far more traffic.
Craig Wilson - MCNE, MCSE, CCNA
Novell Support Forums Volunteer Sysop
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.
"StacieWhite" <[email protected]> wrote in message
news:[email protected]..
>
> I have a PCI vulnerability titled "LDAP Anonymous Directory Access
> permitted" which I need to fix. I disabled anonymous binds in the props
> of the ldap server object in question. However I guess this was not the
> fix.
>
> Is there a difference between anonymous binds and anonymous directory
> access? I was being told this is my problem - that bind is different
> than directory access so I fixed the wrong thing. I thought ldap was
> the directory access protocol, and bind was the connection being made
> to the directory using ldap. Ok. I'll quit typing now. any help is
> appreciated.
>
> Stacie White
>
>
> --
> StacieWhite
> ------------------------------------------------------------------------
> StacieWhite's Profile: http://forums.novell.com/member.php?userid=1719
> View this thread: http://forums.novell.com/showthread.php?t=331489
>

Anonymous user access to GP Process iView

Hi GP/Portal Gurus,
I've created an iView for my GP process. The problem is only authenticated users can successfully access to this GP Process iView. Anonymous users will get an error in accessing GP process iView. I've given the Page and iView authentication scheme as anonymous. But still, it doesn't work.
The error message is:
"com.sap.tc.webdynpro.clientserver.session.SessionExpiredLongJumpException: Application session has expired: No application session with ID oJji4PrZdG5ox8ITkiHTpAsDdNOJtMyv78EPQ66xiLlA/pcd:portal_content/cafUAT/formBrole/sap.com/cafeugpuiinst/AInstantiation/base exists. Hint: A follow-up request was sent to Web Dynpro, but no corresponding session was found under the existing sessions. Reasons: a) Session has expired; b) Web Dynpro is called with incorrect session parameters; c) Application session has been destroyed due to proceeding exception. Please restart the application..."
Appreciate any help.
Rgds,
Hapizorr

Hi Hapizorr
From what you have posted, please try to login again into portal and then proceed with the creation of iView.
Please let us know the behaviour this time.
Regards
Navneet

WPC: Access Java beans from XSL

Hi,
How can we access custom Java beans from within the XSLs used to render WPC webforms? Do we have to implement a custom XSLT Helper? I am able to access standard Java classes using the <xmlns> tag but when I try to reference our custom classes the WPC editor throws a ClassNotFound exception. Any help will be appreciated.
Thanks and Regards,
Shibendra

Hi,
How can we access custom Java beans from within the XSLs used to render WPC webforms? Do we have to implement a custom XSLT Helper? I am able to access standard Java classes using the <xmlns> tag but when I try to reference our custom classes the WPC editor throws a ClassNotFound exception. Any help will be appreciated.
Thanks and Regards,
Shibendra

Adding login page to framework page for anonymous user/access

Hi all,
I have created all iviews, page and a role with anonymous authentication. Created desktop,set theme, added rules for the custom framework page for anonymous access. We need to show some information even before user logs in. How should I add login iview to the custom framework page?
Thanks,
Dileep

Hi Dileep,
I want to add the login iview to the framework page for anonymous access like you.
I'm new with the portal. Can you guide me to do this from the beginning?
Thanks!
Chan

Disabling anonymous ftp access

We have just completed a 9iFS install. The previous version of iFS was 1.1.6. We were having problems with anonymous logins (people were dumping garbage in our public folder) and we disabled anonymous FTP by changing the guest password (we also changed it in the IFSDavServletParameters.properties file and modified the ftpserver.def file by setting AnonymousPoolSize = 0 and AllowAnonymousConnections = false. We would like to do the same with 9iFS but these files no longer exist or have been renamed. What are the equivalent files in 9iFS or how else can we go about disabling anonymous logins?
N

Hi Siva,
Yes the SLD and UME is already configured.
Regards,
Anupama

Anonymous ftp access

We have just completed a 9iFS install. The previous version of iFS was 1.1.6. We were having problems with anonymous logins (people were dumping garbage in our public folder) and we disabled anonymous FTP by changing the guest password (we also changed it in the IFSDavServletParameters.properties file and modified the ftpserver.def file by setting AnonymousPoolSize = 0 and AllowAnonymousConnections = false. We would like to do the same with 9iFS but these files no longer exist or have been renamed. What are the equivalent files in 9iFS or how else can we go about disabling anonymous logins?
N

I understand what you're specifically asking for, but could you provide some background on what specific requirement(s) you are seeking to resolve -- the requirement(s) here, and not the proposed solution here using ftp.
Are you are familiar with ftp attacks, if this is an open Internet site? Open ftp servers are malware magnets.
If you're trying to avoid having specific (known) users specify authentication, then there are ways to do that. Not the least of which is sftp with the public keys shared. There are other approaches, such as uploads via http-based sites.

Access to WPC Web Pages by Anonymous Users?

Hello,
i want to give anonymous users access to Web Pages that were created with the Web Page Composer.
In did the following:
1. create the Web Pages,Site Navigation etc....
2. edited the permissions of the site: grant anonymous users Read Access.
3.included the site navigation into the navigation of the anoymous users
When i access the portal as anonymous users and try to open a Web Page, i get a logon screen for Authentification.
I think that there is a problem, that i didn't find any way to set the Authentification Scheme for these Web Pages to "Anonymous". This is the way it has to be done with other iViews.
When i am accessing the page with an authenticated users, i have no problem with displaying the same Web Pages.
Is there anywhere an attribute i need to set? Or is it currently not supported?
Regards,
Marcus
Message was edited by:
Marcus Böhm

1. Configuration in PCD - go to Content Administration -> Portal Content-> Portal Content -> Web Page Composer -> Container iViews -> WPC
Default Containers. All of the iViews in this location should have the
"anonymous" authentication scheme. The next location which should be
checked is Content Administration -> Portal Content -> Portal Content ->Web Page Composer -> iView Templates. Again all of the iViews should
have the "anonymous" authentication scheme. The same applies to all the
templates which reside in Content Administration -> Portal Content ->
Portal Content -> Web Page Composer -> Page Layout Templates. Finally
check if all the pages which reside in Content Administration -> Portal
Content -> Portal Content -> Web Page Composer -> Page Layouts have the
"anonymous" authentication scheme.
2. Configuration in KM - make sure that all the pages, which should be
displayed to an anonymous user have in their permissions the Anonymous
Users Group.
3. Security zones - if you go to System Administration -> Permissions ->Security Zones -> com.sap.nw.wpc -> wpc -> no_safety and you open the
permissions of this object, the Anonymous Users group must be added in
the list.
If all mentioned objects have their setting as described and you still
experience problems (e.g. you see a browser dialog window for
authentication), the reason most probably is, that the KM is not
configured for anonymous access. A full description of the needed steps
is provided with note 837898.

WPC for Anonymous user

Dear All,
We are on SAP NW 7.3 and trying to provide the WPC page for anonymous users.
Have designed the WPC content, connected to a role and gave the role to anonymous user, but when we go to portal
http://<host>:<port>/irj/portal/anonymous it gives a logon page. To resolve the issue have gone thru all the posts and recommendations but still the same error.
Tried to follow the blog 'Webpage composer Anonymous User access' but in NW 7.3 can find the PCD location 'WebpageComposer', - but in templates we have the WPC Templates and have given the required permissions
Also the security zones are changed.
Has it something to do with the 'Staging Area' folder (Navigating through the role Accesible Area Management -> content Editor), because when we create any new Area/Page(WPC Area/Page) it creates the same in this folder, which is present as a KM Folder. This folder does not allow to set the permissions (Accesible Area Management -> Content Library -> Staging Area -> Details -> Permissions)
Your valuable suggestions would really help me to resolve this issue.
Thanks,
Srv

Dear All,
Got the reply from SAP to perform the below steps and its working fine for us.. just in case any one of you needs this info.
1. Add the "authentication scheme" property to the WPC design time page template: a. Go to "System Administration" ' "Content Model Management" ' "Property Classification" b. Under "Object Type" select "Page" c. Under "Template" select "WPC Design Time Page" d. Under "Available Properties" locate "Authentication Scheme" and add it to the "Selected Properties" 2. Go to the Area Management Role and locate the area and the page that you would like to be available to anonymous users 3. Set End User permissions for "Anonymous" group on the area 4. Publish the page(s) and the area 5. Navigate to "Content Administration". Make sure the "Area Management"role isn't open in some other tab or browser window 6. In the Portal Content Catalog, locate the role which is available to anonymous users and has the WPC area connected to it. 7. Open the role, open the connection 8. For each page under the workset (area): a. Open the page b. For each iview and page under the page, open the iview/page and navigate to its properties: i. Locate the "Authentication Scheme" property and change it to "anonymous" ii. Save the object iii. For pages, open the page and perform the same process for each iview under the page iv. Save

Anonymous user - getting id/password popup when accessing KM folder & files

Hi All,
We are trying to expose a KM folder [/documents/myDocs] to anonymous users (User: Guest assigned to 'Anonymous Users' group)
i've created a KM Navigation iview and assigned to 'anonymous' role (and this role assigned to 'Anonymous Users' group).
when i open the page as a Guest user, i get:
- i see that an image (annotations image : /etc/public/mimes/images/ico16_note.gif ) opens the popup even though i have given '/etc' folder READ permissions to 'Anonymous Users' group; and FULLCONTROL to 'Everyone' group)
- Also, when I navigate to an inner folder and try opening a PDF file, i get a popup asking for id & password
i checked default trace and i see this error:
Guest | ACCESS.ERROR | /documents/myDocs/RPT/RPT_NOTIFY/RPT_HELP.pdf | leaf_delete
Guest | ACCESS.ERROR | /documents/myDocs/RPT/RPT_NOTIFY | node_delete
i have already gone through SAP NOTE: 837898 - How to configure anonymous CM access. Doesn't help.
Can anyone help?
Waiting for ur response, Thank you,
SK.

Hello SK,
Download com.sap.km.cm.par and open it on Developer Studio, check if Authentication Scheme=anonymous for both docs and navigation components
When you open the page the image is displayed by the docs (com.sap.km.cm.docs) component, if the system is displaying a login screen at navigation the solution above might fix it
regards,
Rafael

SSRS 2012 SP integrated only allows Anonymous Access

We are building a SP2013 farm with SQL2012 and the SSRS 2012 add in , looking at the rsreportserver.config we have added the parameter RSWindowsNegotiate as listed below.
<Authentication>
    <AuthenticationTypes>
      <RSWindowsNegotiate/>
</AuthenticationTypes>
We have followed this article (http://technet.microsoft.com/en-us/library/cc281253.aspx) where the following is listed:
ASP.NET must be configured for Windows Authentication. By default, the Web.config files for the Report Server Web service and Report Manager include the <authentication mode="Windows"> .
However looking at the web.config of the report server the following parameters * (see below)are present but
not the authentication mode='windows', only <windowsAuthentication enabled="true" /> is listed.
* <security>
      <authentication>
        <anonymousAuthentication enabled="false" />
        <windowsAuthentication enabled="true" />
      </authentication>
    </security>
The report server is operational as long as we use datasources located on the same farm but as soon as try to utilize a datasource outside the farm the report server uses anonymous to access the datasource. We have configure the c2wt services and have
the proper spn's in place on the domain , so we should not be suffering from the double hop issue.
How do we configure the reportserver to accept windows authentication?
Any help is welcome.
Regards,
Jim

Hi Jim,
In your scenario, you need to configure the SharePoint mode report server to use Kerberos authentication. Since SQL Server 2012, Reporting Services SharePoint Integrated mode has been changed from a Windows Service to be a SharePoint Shared Service. In this
way, the SharePoint mode report server has its own RSreportserver.config file located in the following directory (SharePoint 2013):
C:\Program Files\common files\Microsoft Shared\Web Server Extentions\15\Web Services\Reporting
So, the document you referred to applies to native mode report server. For SharePoint mode report server, what you need to do is set the Authentication elements in its corresponding configuration file as follows:
<Authentication>
<AuthenticationTypes>
<RSWindowsNegotiate/>
</AuthenticationTypes>
After that, we need to reset the IIS. When creating the SQL Server Reporting Services Service Application, we need to check the “Enable Windows Authentication” option, and select the Integrated Windows authentication type to “Negotiate (Kerberos)”.
Besides, we must register SPNs for both the SharePoint mode and the SQL Server service to which the report data source establish a connection.
Here is an excellent blog about this topic that you can walk through:
http://blogs.technet.com/b/sharepoint_-_inside_the_lines/archive/2013/05/28/sharepoint-2013-with-ssrs-2012-and-constrained-delegation.aspx
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Access Denied for anonymous users

Hi everybody,
we have three different anonymous users on the portal. One can access his content without problems. For the other two when trying to access KM-Content like News we get following message
"Access Denied. The item you are attempting to access requires permisions that you do not have.
Contact the premissions owner...."
We gave the permissions in CM to the anonymous users directly and also to the anonymous group.
The authentication scheme to all pcd objects are on "anonymous" and access ricghts have been granted for all pcd objects. Everything like for the first anonymous user.
Any suggestions on this?
Regards

Hi,
Try to give permision to Everyone group, all users including anonymous users are present in this group.
Greetings,
Praveen Gudapati
p.s. points are always welcome for helpful answers

Anonymous WPC access

Similar Messages

Maybe you are looking for