Another replication manager user for external replication

Hi,
We would like to replicate to external vendor LDAP, which will acts as a consumer. We do not want to give the same password as we use for default Replication Manager. Preferably, we would like to have a seperate replication user.
Could someone point me some link, which could help me in setting this up. We're at 11G version and consumer is at 5.2. We do know how to setup replication between 11g and 5.2, however not sure on how to utilize this seperate user, specially like setting up of ACI etc.
Thanks in Advance.

838471 wrote:
Do you something more against it, specially related to technical overhead it might cause on our side? Anything, which we could justify our application owner that this is something we should push back to external vendor for upgrade.Personally I have seen two types of problems in mixed topologies.
First, protocol conformance is different. In general later versions are stricter than 5.2, but if you get different behavior on the replica than on the supplier, it's possible for an operation to succeed on the supplier but fail on the consumer. And if that happens, replication will simply halt and reinitialization or replication repair will be needed to get replication working again. This is more likely if the supplier is 5.2 and consumers are later, but I would not be comfortable indefinitely that every possible edge case has been accounted for.
Also, 5.2 consumers have had stability issues with mixed topology configurations. Every master that has ever participated in the topology leaves behind a replica update vector. 5.2 replicas tend to leak memory when there are more than a few of these RUVs, and they leak more, the more of them there are. If your existing topology has more than 4 masters you are definitely in an unsupported configuration, and should not be surprised when your 5.2 consumers start leaking memory, hanging, and needing periodic restarts. I know some hotfixes have been created for these kinds of problems, but I have also heard that Oracle Support is not building any more hotfixes for 5.x at all.

Similar Messages

  • Manage users for multi DB

    Dear all,
    Rigth now i have multi db and multi users .It's difficult to manage users for me.
    I want to know as the following :
    1. Is there any way that one user login can access any databases
    (single sign-on) and how?
    2.Can we access data from sql server via oracle db (sqlplus) and how?
    Thks so much for advance
    Chara

    1. Is there any way that one user login can access
    any databases
    (single sign-on) and how?You can use Oracle Internet Directory (OID) to provide user credentials for multiple databases. The advanced security option also includes these SSO abilities.
    2.Can we access data from sql server via oracle db
    (sqlplus) and how?Yes, using Oracle Heterogenous Server (free) or the Transparent Gateways ($$$). The former allows you to query the remote DB, the latter allows you to act like you're in the actual environment.

  • How can I send Captivate 8 swfs to user for external reviews?

    I used Captivate 5 before and there was a drop-down to send review internally or to Acrobat.com. Is there anything similar in Captivate 8?

    Hi Geri,
    Welcome to Adobe Forums.
    You may use the following links to understand the process of using your Internal for sharing a published SWF for review. Server In a shared network, multiple reviewers can publish their comments to a common file. In a setup where reviewers do not have access to the shared location, they can export their comments to an XML file and send it to the author. When the XML file is imported into Adobe Captivate, the comments appear the same location at which they were added.
    Acrobat.com is been discontinued so the only option left is your Internal Server.
    There is an option in file menu " Send for shared review"
    https://helpx.adobe.com/captivate/using/using-air-review-application.html
    http://tinyurl.com/mkczcfj
    Regards,
    Rajeev.

  • How can I use Windows IAS to validate WLC management users?

    I am having a problem using my Windows IAS radius server to validate management users for my 2112 Wireless Lan Controller.
    I have defined the radius server and it works ok with the policy for validating wireless clients but not for WLC management users.
    The Remote access policy seems to be set up correctly as the event viewer on the server shows:-
    Event Type: Information
    Event Source: IAS
    Event Category: None
    Event ID: 1
    Date:  09/02/2011
    Time:  11:06:06
    User:  N/A
    Computer: UK01DC07
    Description:
    User xxxxxx was granted access.
    Fully-Qualified-User-Name = TRAVEL.OAG.com/Dunstable Admins/xxxxxx
    NAS-IP-Address = 10.10.45.210
    NAS-Identifier = UK03NM01
    Client-Friendly-Name = UK03NM01
    Client-IP-Address = 10.10.45.210
    Calling-Station-Identifier = <not present>
    NAS-Port-Type = <not present>
    NAS-Port = <not present>
    Proxy-Policy-Name = Use Windows authentication for all users
    Authentication-Provider = Windows
    Authentication-Server = <undetermined>
    Policy-Name = UK03NM01 - login
    Authentication-Type = PAP
    EAP-Type = <undetermined>
    But, the WLC log shows:
    *Feb 09 11:06:06.612: %EMWEB-1-LOGIN_FAILED: ews_auth.c:2104 Login failed. User:xxxxxx. Service-Type is not present or it doesn't allow READ/WRITE permission..
    The WLC just returns the login screen
    Any thoughts?
    Thanks in advance
    Richard

    Event viewer shows :
    Event Type: Information
    Event Source: IAS
    Event Category: None
    Event ID: 1
    Date:  10/02/2011
    Time:  08:49:39
    User:  N/A
    Computer: UK01DC07
    Description:
    User xxxxxxxx was granted access.
    Fully-Qualified-User-Name = TRAVEL.OAG.com/Dunstable Admins/xxxxxxxx
    NAS-IP-Address = 10.10.45.210
    NAS-Identifier = UK03NM01
    Client-Friendly-Name = UK03NM01
    Client-IP-Address = 10.10.45.210
    Calling-Station-Identifier =
    NAS-Port-Type =
    NAS-Port =
    Proxy-Policy-Name = Use Windows authentication for all users
    Authentication-Provider = Windows
    Authentication-Server =
    Policy-Name = UK03NM01 - login
    Authentication-Type = PAP
    EAP-Type =
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Data:
    0000: 00 00 00 00               ....   
    and IAS log shows:
    "UK01DC07","IAS",02/10/2011,08:49:39,1,"xxxxxxxx","TRAVEL.OAG.com/Dunstable Admins/xxxxxxxx",,,,,"UK03NM01","10.10.45.210",,0,"10.10.45.210","UK03NM01",,,,,,7,1,"UK03NM01 - login",0,"311 1 10.10.45.254 12/04/2010 23:56:59 1987",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"Use Windows authentication for all users",1,,,,
    "UK01DC07","IAS",02/10/2011,08:49:39,2,,"TRAVEL.OAG.com/Dunstable Admins/xxxxxxxx",,,,,,,,0,"10.10.45.210","UK03NM01",,,,,,2,1,"UK03NM01 - login",0,"311 1 10.10.45.254 12/04/2010 23:56:59 1987",,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,"Use Windows authentication for all users",1,,,,
    It appears to me that IAS checks and passes the username/password as being valid but this response is ignored by the WLC
    Richard

  • Manually add/modify users for pure-ftpd ftp server?

    Ave,
    Alright I downloaded, compiled & installed the latest pure-ftpd ftp server from pureftpd.org .. and it seems to have started off ok.
    Since there is no Leopard Compatible PureFTPD Manager out yet, I need to create/modify users manually. Does anyone know how to do that for Pure-FTPD FTP Server? I can't seem to find or see any .conf files or anything at all. How do you manage users for pure-ftpd through command line or configuration?
    Thanks!

    This seems like a good one:
    extra/bftpd 3.8-2
        Small, easy-to-configure FTP server
    From what i have read you can set individual configuration for each user or group:
    http://bftpd.sourceforge.net/doc/en/bft … html#ss3.1

  • QM Certificate for external purpose......Layout

    Dear Gurus,
    Can anybody have a Quality Management Certificate for External Purpose Layout or priview.
    Pls send to [email protected]
    thanks inadvance.
    Regards,
    Venkat

    Hi,
    Did anybody hv a certificat proforma plz.......
    Regards,
    Venkat

  • Why do we need to define RFC destination and user for material replication

    Dear Experts,
    why do we need to define RFC destination and user for material replication? Here we use crm middleware only for material replication. Could you please help me to understand it?
    regards,
    Ranjan

    Hello,
    As far as I know, you can use the same RFC destination already available in ECC to SRM to replicate materials.
    You can refer to note 720819.
    Regards,
    Ricardo

  • Lync 2013 - Address Book Synchronization Issues for External Users

    I recently deployed Lync Server 2013 in my organization. Everything works fine except for the address book synchronizing issues and the mobility access. I would really appreciate if someone could share their knowledge as I have done lot of troubleshooting,
    not sure if I have missed something. Please note my setup below for the External Web Services.
    Lync Front End:
    Listening: 8080 4443
    Published: 80 443
    I have published my External Web Services URL and the following ports are open: 4443, 443, 8080
    When I look at the Lync Client Configuration, ABS Server External URL is pointing to https://lyncexternalweb.domain.com:443/abs/handler. However, GAL Status is still pointing to my internal Front End FQDN: https://internal.domain.com:443/abs/handler.  
    For machines that are joined to the domain, the address books synchronizes with no issues. For machines that are not joined to the domain and for external users, GALContacts and GALContacts.DB files are not event generated for the users profiles. 

    Hi Anthony,
    Please note the findings below:
    1. I was checking the Lync Client configuration on one of the PC that is not joined to the domain, still on the domain network via site to site VPN connection. I noticed that the Connected Lync Server varies: sipinternal.domain.com, sipexternal.domain.com,
    lync.domain.com (Pointing to the Edge Server IP).  
    2. Edge Server External Settings: Single IP address with the FQDN set to lync.domain.com for all 3 services and the following ports configured. Access Edge Service: 5061, Web Conferencing Edge Service: 444, A/V Edge Service: 443 with NAT enabled public
    IPv4 address. I have checked the replication status between the Front End and Edge Server, it is up to date.
    3. In regard to the https://lyncdiscover.domain.com, I don't have the lyncdiscover.domain.com published, but it is pointing to the NAT enabled public IPv4 address which is assigned for A/V Edge Services.
    4. For the port forwarding, I am using the Cisco Meraki router. 
    Please advise if there are there is something that I am missing.
    Thanks!

  • Problem with links for external user

    Hi,
    We´re using SAP NetWeaver Portal 2004s SPS 10 and we have a problem with links within notification-mails:
    The link to the document (e.g. within a subscription mail) consists of "http:///...". Only user using the portal within our network can open this links. All external user can´t open this links. How can I change the URL so that our external user can open the links, too?
    Thanks for help,
    Sven Keller

    We already have another URL for external usage. My problem is how to define that created links to documents and folder are automatically using the external URL.
    If somebody receives an email (e.g. subscription) the URL to the folder is:
    http://<portalserver>:51000/irj/go/km/navigation/documents/Public Documents/Documentation
    But it should be:
    https://<externalportal>/irj/go/km/navigation/documents/Public Documents/Documentation
    Message was edited by:
            Sven Keller

  • HP Application LifeCycle Management - URL for use with another Project Management Tool

    I'm trying to find a way to get a ALM Requirement URL that will work with other applications.  The URL from the COPY URL option (when right-clicking on the requirement) works for e-mails but I can't seem to get it to work for another project management application (Daptiv).  We would like to insert the QC Requirement link to another application where the user can access the requirements directly when clicking on the QC hyperlink.
    We have HP Application Lifecycle Management Software Version 11.00 Enterprise Edition.
    Any help is greatly appreciated.
    Thanks.

    As Abhishek mentioned we dont need a calc manger or EPMA to migrate classic planning applications. You just need to log into shared services, expand file system and take a file system export, paste the export to the destination environment, now use it as a source and perform an import in the shared services of destination server. It worth having a look at:
    http://blogs.oracle.com/HyperionPlanning/entry/lifecycle_management_from_scratch
    Cheers...!!

  • SSO and Form 10g, Setting RAD of OID for DB users identified externally

    Please Help!
    Current environment:
    - All users were created with identified externally in Database (OPS$)
    - SSO was setup correctly according to OID admin guide Ch 43 and SSO admin guide ch 8 for App10g. (user login orasso without seeing basic auth/sso login form)
    - DB parameters:
    remote_os_authent=TRUE
    os_authent_prefix=' '
    issues:
    - set ssoDynamicResourceCreate = true
    When user hit the form link, i.e. http://host:port/forms90/f90servlet?config=test&form=appwelcome
    it redirects to http://host:7777/oiddas/ui/oracle/ldap/das/mypage/AppCreateResourceInfo?...
    where it shows Resource Name TEST and prompts username/password/database
    when user inputs window logon /password/database value (same as in form6i)
    it returns ORA-01017: invalid username/password; logon denied.
    - set ssoDynamicResourceCreate = false
    manually set RAD for the end user (I am not sure if I am doing this correctly):
    Name = test
    TYPE = oracledb
    username = (blank)
    password = (blank)
    datebase = prod
    When enduser hits the form link, it returns ORA-01017.... same errors.
    Any ideas how to trouble shoot and configure RAD for users with OPS$ auth?
    thank you in advance!
    Kan

    Thank you for your input!
    This is how our current production is setup that users use os authent (OPS$) to access forms/reports 6i. I'm just trying to migrate it to app10g environment.
    I did configure SSO with WNA, it works fine. Any users can access NON-DB connected forms/reports. Only when forms/reports require DB conn, users who
    have db password can access them with one click. But users identified externally will keep seeing Oracle Logon and Ora-01017 after authent into MidTier.
    Setup RAI with one real db user account is not ideal since there are 1000+ OS authent users who have different database roles. Turn off the OPS$ and setup dummy password for 1000+ users may be the last solution.
    v/r
    Kan

  • Excel Services Connectivity on Sharepoint 2013 for external user

    Currently , external user is able to refresh the data on sharepoint site through browser. the data connection is pointing the one of the external data source. But how can an external user (Internet user which accessing sharepoint through internet) download
    a copy of excel in sharepoint library and open the excel workbook with data refresh ability at client machine ?
    Do we need client machine to be able to access / ping the external data source? 
    Thanks.

    Thanks for the response.
    They want to perform data analysis and design their own report with own template , for example : to remove subtotal from the powerpivot tables which we cannot change the formatting at the excel services at browser level.
    So if i understand correctly, we need to get the client machine to be able to access to the database server directly to get the access to the cube for data analysis although we had this odc file connection setup, am i right?
    For internal user, network team should open port / access for them to access database server directly.
    For external user, either to open public access to the database server directly or setup a VPN connection for the external user to access the database server in their secure network.
    Let me know if i understand this correctly.
    Thanks.

  • GR/IR Account - one for internal vendor and another for external vendors

    Hi Experts,
    Can I have two GR/IR accounts - one for internal vendors and another for external vendors?  Please let me know.
    Thank you.
    with regards,
    Muthu Ganapathy.

    Hi Muthu,
    GR/IR accounts are not dependent on Vendors, they are dependent on Materials, to be precise on Plant/Valclass.
    You can post to 2 different GR/IR accounts if you set up 2 different classes. then it is possible.
    For setting up the same. Go to T.code : OBYC, Transaction : WRX.
    Here Setup different GR/IR accounts per val.class.
    Letme know if you need further info
    Thanks
    Kalyan

  • I have one home computer and our household has 2 iphones. I am signed up on itunes and now my husband would like to have an account with itunes as well. Can there be two accounts for 2 users for itunes on one home computer? How do I add another account ?

    I have one home computer and our household has 2 iphones. I am signed up on itunes and now my husband would like to have an account with itunes as well. Can there be two accounts for 2 users for itunes on one home computer? How do I add another account ?

    Have a read here...
    https://discussions.apple.com/message/18409815?ac_cid=ha
    And See Here...
    How to Use Multiple iDevices with One Computer

  • How do I add another Iphone to my laptop?? I have creadted a new user for the other Iphone however it wont let me sync to the new user??? HELP

    How do I add another Iphone to my laptop?? I have creadted a new user for the other Iphone however it wont let me sync to the new user??? PLEASE HELP

    Never mind, disregard.  I went in and reset my password to my AirPort Express, and for some reason, it then went through, and is all working and good.

Maybe you are looking for