Another "Won't recognize the CD" topic...

I have a CD that is protected or whatever, but iTunes won't recognize it. The CD has you do some process to get the songs onto the computer, which I did, but it still won't let me put the songs into my library...
I have tried getting them directly from the CD, and from the files the CD put on my computer itself... nothing.
It says they are in the "Protected format" and if I have the CD I can put them into iTunes if I have the CD... which I do, it just won't recognize it...
Anyone able to help?

A co-worker of mine has had a similar problem. What she did was run Norton Disk Doctor and apparently the problem was fixed. However, after talking to her, she's no certain if Norton fixed the problem or if just shutting down the computer for the night fixed it.
I suggest trying either. Also check to see if the upgrade is for PC or Mac as Adobe's software isn't able to be read by both anymore because of the differences between OS X (10.3.X) and Windows XP. While some may still work I was advised to use the CD's designed for the specific operating system.
Hope this helps.

Similar Messages

Airport Utility cannot find my Airport. It is nearby, no interference, and worked for about 9 months. The Airport still provides wireless internet for the household, though it won't recognize the printer -- plugged in or wireless.

How can I get Airport Utility to find my Airport? It is nearby, no interference, and worked for about 9 months. The Airport still provides wireless internet for the household, though it won't recognize the printer -- plugged in or wireless.

Are you using the latest version (5.5.2) of the AirPort Utility to access the new 802.11n AirPort Extreme Base Station (AEBSn)? Your tagline has it that you are running OS X 10.4.6. You would need at least 10.5.7 to run the utility. I assume that you are running the latest utility on another device ... correct?
When having difficulties accessing the AirPort thru the AirPort Utility, try the following, in order checking accessibility with the utility after each step:
o Check the local connection. If you are trying to access the AirPort wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the base station's LAN ports.
o Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
o Perform a "factory default" reset on the base station.

SCC-2345 won't recognize the (2) SCC-SG24s I installed

SCC-2345 won't recognize the (2) SCC-SG24s I installed.
They don't show up as a MAX selection. They are installed
in J3 and J4. I've tried moving them to different slots with
but they still don't show up.
We have a 6052E card connected to the SCC-2345. We are
using Labview 7.0 Developer Suit. Operating system is Windows
2000.
The (2) SCC-SG04s we have installed do show up as a
selection and work well.
Can anyone point me toward a resolution to this problem?

Alan,
Thanks for your reponse, it was dead on.
After updating, the scc-sg24s now appear as a drop down selection but now
I have another problem. My PCI-6052 DAQ board now does not appear as
a selection to "add". Immediately after updating NI-DAQ I fired up MAX and
even though the scc-sg24 appeared as a selection, this selection, the
scc-2435, our pci-6052, and all other modules fitted to the pci-6052/scc-2435
appear with a red "X" next to them.
I renamed the existing <Data> directory and allowed MAX to recreate it but the
PCI-6052 appears ONLY as a legacy selection and can not be added/selected to
DAQmx.
I can add the scc-2345 DIRECTLY to DAQmx and also select all the modules
that we have loaded into it, but after I select <OK> I get an error message that I
haven't selected a digital interface
I'm assuming this is because I can't add the 2345(I have to add it directly to
DAQmx) to the 6052 because the 6052 doesn't show as an available option to be
added to DAQmx.
Do you know if there is other software or drivers I need to update?
Again, thanks for your help.
Art Cravener
Dana Corporation
Message Edited by anengineer on 10-12-2005 03:33 AM

Ipod stuck in recovery, and iTunes won't recognize the device.

My ipod is stuck on restore/ recovery mode, and iTunes won't recognize the device. The computer makes the beep noise saying that somethin is plugged in but itunes won't pick it up. It is iTunes 11.1.1 and i have a 5th generation Ipod touch. Any Help? Thanks (:

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

I have a MacBookPro with Yosemite and Safari won't recognize the router after sleep unless I restart the computer.

I have a MacBookPro with Yosemite and Safari won't recognize the router after sleep unless I restart the computer.
OS X 10.10.1.
Safari Version 8.0 (10600.1.25.1)
WiFi router connects with mail but not Safari

See
iOS: Device not recognized in iTunes for Windows
- I would start with
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
or
Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Featurs appin the Window Control Panel. Then reinstall all the Apple software components
- New cable and different USB port
- Run this and see if the results help with determine the cause
iTunes for Windows: Device Sync Tests
- Try on another computer to help determine if computer or iPod problem

My old mac and 3g won't recognize my iphone4s - and the new itunes on my pc won't recognize the 3g

Hi, I'm having issues syncing my information from two separate computers to my new phone.
I backed up my old iPhone 3g on my iBookG4. The G4 does not support the iPhone 4s because it's too old and I cannot update to Lion or Leopard because it's too old.
I have a Dell that I bought in 2009 (i know i know, it was cheap and i had to get it for a class i was taking) - anywho, I have downloaded the new version of iTunes for the iPhone 4s and this version of iTunes won't recognize the 3g - I'm guessing because it is so outdated.
So, I can't get the old computer to read the new phone or the new computer to read the old phone.
What I attempted was home sharing with iTunes and that got all my music and apps, but contacts and calendars I can't move.
Any suggestions??
thanks.
ps this mac is so old that the letter a just popped off the keyboard

Syncing of devices running iOS4 and higher requires iTunes 9.x and higher.
iOS 4.3 and higher requires iTunes 10.x or higher.
Regardless, iTunes 9.x and 10.x require Windows XP Service Pack 3.
Is your Windows system current with all Windows updates?

Iphone was in the middle of an update, and an error occurred. I think it is stuck in "restore" mode, but my computer won't recognize the device. How do I get it to work?

My iPhone 4S was in the middle of the latest software update while connected to iTunes on my PC. After it took 45 minutes to download, a pop-up came up and said that an error had occured and it couldn't be updated. I made a mistake and clicked "Okay" instead of "More Information", and now my PC won't recognize the device and connect it back to iTunes. This happened to me last time I updated it, but I've tried everything I did last time and it won't work. I have a feeling I didn't have enough storage on my phone to update it, but now I am stuck and don't know what to do. My phone is frozen with the iTunes logo and the USB drive and says to connect to iTunes. What can I do to fix it?

If this has happened more than once the problem is likely on your PC.
See here: http://www.apple.com/support/iphone/assistant/itunes/

I have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2

i have to upload video from my hewlett packard t200 camcorder to my mac. but mac won't recognize the camcorder files. i even bought flip4mac by tele stream which so far is useless. please help me use my camcorder with my iMac os mountain lion 10.8.2
i tried to get the installation disc for the camcorder but mac wont' recognize it becaue it is windows based i guess.
i just bought the camcorder a few months ago and when my computer crashed thought i'm finally getting a mac...it's been a costly venture which has resulted in more frustration than before my pc.
now the things i want to use with my mac that i thought would be even simpler...are not even useable...
help

That camera shoots H.264 in an .avi wrapper.
You will have to transfer the files via the Finder.
Get a free copy of MPEG Streamclip and convert them to QuickTime .mov using the H.264 codec if you are presumably editing in iMovie.
Note that your list of video codecs won't look like mine as I have Final Cut Pro, but H.264 is definitely an option for you.

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device"

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

I have a macbook air and and hdmi that i have used many times, but not all of a sudden the tv won't recognize the hdmi. The computer flashes when it is plugged into the hdmi but the tv says "no signal" and the airplay displays option says "no device detected" and the drop down bar is grey and locked.

I changed batteries in my Apple track pad and now my iMac won't recognize the UBS keyboard

I changed batteries in my Apple track pad and now my iMac won't recognize the USB keyboard

Please read and use Bluetooth: How to set up your Apple Wireless Mouse or Magic Trackpad

IPod is disabled. Says to connect to itunes however itunes won't recognize the device. What do I do?

IPod Touch is disabled. Its says to connect to itunes however itunes won't recognize the device. What do I do?

Place the iPod in recovery mode and then restore. For recovery mode:
iPhone and iPod touch: Unable to update or restore

I backed up then erased 118 gigs worth of photos, but my storage still says I'm full. I emptied the trash and rebooted but my computer won't recognize the empty space. What gives?

I backed up then erased 118 gigs worth of photos, but my storage still says I'm full. I emptied the trash and rebooted, but my computer won't recognize the empty space. What gives? I erased all my iPhoto pictures from the pictures folder in Finder so I could restore a backup from my Time Capsule. When I try to restore the library, I get a message that there's not enough room on my computer to restore. I have a Macbook Pro with 250 gig hard drive. I would greatly appreciate some help. Thanks!

If you're trying to add a large amount of data all at once, and you get an alert of insufficient space, then from the menu bar, select
 ▹ System Preferences... ▹ Time Machine
If the padlock icon is closed, click it to unlock the settings and authenticate. Turn Time Machine OFF, then back ON and close the preference pane. Restart the computer. Test.

Lightroom (4.3) won't recognize the file type while importing from Canon 5d Mark iii

Anyone mind helping me trouble shoot why my Lightroom (4.3) won't recognize the file type of my Canon 5D Mark iii ?
I have seen this in a couple other threads but none of those suggestions worked for me. I am also a Mac user.

Bomal9 wrote:
I have Lightroom 4.3 and a Mark iii and cannot import raw files into Lightroom.
The above contradicts with this:
Bomal9 wrote:
I am downloading images through the Canon EOS Utility manager and have to import the photos in a folder into Lightroom.
So my reading of that is that you ARE importing Raw files from the 5D3 into Lightroom, but having to use a roundabout route to do so. Is that correct? If so, how are you trying to import when you "cannot import raw files into Lightroom", are you using a card reader or direct camera attachment? Have you tried both methods? And what happens when you do try?

Firefox 6.0.1 update won't recognize the home page which uses a password access which has been saved into 6.0.1.

Question
Firefox 6.0.1 update won't recognize the home page which uses a password access which has been saved into 6.0.1. The security shows permissions for the web site but doesn't recognize that I've been accessing the web page every day since I updated to 6.0.1. Web page trying to access is <http://classic.wunderground.com/cgi-bin/findweather/getForecast?query=zmw:98108.5.99999> This home page worked fine on earlier versions of Firefox and continues with Internet Explorer 9.0.

Looks like its been fixed for me, not by 6.0.1 but by - Todd Siechen from http://www.dvdthemepak.com
Check out his post at:
http://discussions.apple.com/thread.jspa?threadID=335417
Todd... I love you xxx
After having a nightmare since first day of version 6.0.0 and still no fix after 6.0.1, even after Apple requested the files... You fixed my problem... Checked for duplicate fonts and found about 5, selected "Resolve Duplicates" and everything great, even with old projects... You should work for Apple!
Check out the 2 posts:
http://discussions.apple.com/thread.jspa?threadID=313109
http://discussions.apple.com/thread.jspa?threadID=366383
1) The first and biggest culprit we found to be causing problems is with font issues. In order to alleviate this problem, open Font Book and make sure all the Fonts that are turned on have no dots next to them. If they do then select them and select "Resolve Duplicates" from the Edit menu. If you are using a different font manager then use whatever tool is available to make sure no duplicate fonts are loaded. iDVD 6 is very sensitive to this.
Many many many many many many many many many many many many many thanks.
Regards,
Charles Teton
United Independent Pictures Ltd.
http://www.makingmymovie.com

Upgrade won't recognize the hard disk to begin the installation

Powerbook G4 w/ 9.2.2 & the original CD for OS X 10.1 - thought I'd get it on and upgrade from there since I know I'll need to buy more RAM - existing is 385 & I only have 10 G on the system. I downloaded several updates, ran the security update first. The 10.1.1 update won't recognize the hard disk to begin the installation.Thought I had a clue, but stuck in the jungle upgrading. Which one is which - is Jaguar 10.2??? Do I need to be doing each of these upgrades to get it running well until I add the RAM? I'm trying to stay calm since it updated my IE and I think I lost everything I had on it - too fast with the click and assumed they were separate entities....(unless there is a genius out there who can help on that front too)
many thanks... Kate

Hi Kate! And Welcome To Discussions!
You're lucky Kappy is helping you out with this. He is one of the more knowledgable posters here!
I'm just adding some extra info.
There are two PowerBook models that need a Firmware Update, before you can install a newer OS X.
Check if one of them is yours.
Mac OS X Versions 10.1, 10.2, 10.3, and 10.4, are complete system upgrades that must be purchased.
The point upgrades, such as 10.1.x to 10.1.5 (Final) 10.2.x to 10.2.8 (Final), 10.3.x to 10.3.9 (Final), and 10.4.x to 10.4.6 (Pending), can be downloaded for free.
Tiger is available for purchase at The Apple Store (U.S.).
Jaguar and Panther, are no longer available directly from the Apple Online Store, as Tiger 10.4.x is the most up to date OS.
Jaguar Full Retail Version CDs, a Full Retail Version, of the Panther Install CDs, or a Full Retail Version of the Tiger Install DVD, can be purchased rather inexpensively, at some online Apple retailers, Amazon, eBay, AppleRescue, etc.
Be sure not to purchase grey, upgrade or machine specific CDs or DVDs.
Jaguar and Panther are only on CDs, not DVDs.
More info here Tip: Using OS X Install CDs/DVDs On Multiple Macs
Once Jaguar 10.2.x is installed, you can use the 10.2.8 combo update,
or if Panther 10.3.x is installed, you can use the 10.3.9 Combo Update, to upgrade to the final edition of either OS.
If your Mac meets the System Requirements for Tiger, you could also consider installing that.
And then use the 10.4.6 Combo Update.
You'll find System Requirements in these links:
Panther
Tiger
Additionally,
"Tiger ships on a DVD, but if your Mac doesn’t have a built-in DVD-ROM player, you’ll need CD media. When you buy Mac OS X Tiger, you qualify to purchase Tiger CDs for only $9.95."
Download The order Form Here. Media Exchange Program
Shop Carefully, Examine All Documention, And Good Luck!
ali b

Another "Won't recognize the CD" topic...

Similar Messages

Maybe you are looking for