Another X48C problem, yet again

I read some threads and found that some are having same problem as me, however, my problem is slightly different.
Thermaltake Toughpower 750watts
Q9450 C1 with X48c
1 lg and 1 sony dvd drive
Seagate barracuda 1/2 terabyte(500gb)
Powercolour 3870x2
corsair xms2 DHX 4gb kit
The problem actually started a few wweeks ago when everything, including the mouse, hangs. However a few weeks ago this problem can be solved by a rebooting
Yesterday when i rebooted, the fan turns on and off, sometimes it spinturn for merely a second, or it will spin at a very fast speed then slow down, and then turns itself off again
I tried reseting the cmos a few times(i duno why). I did get into bios and optimised default settings, it hangs after my windows vista loading bar, after another restart it gets into windows, but hangs.
Now when i push the power button, it just spins for a sec, or for a long time, before offing itself.
I took out my ram and gpu and put them back again, but still having the same problem
Is the board dead? anyway to get it to start? i need to use it for more 'demanding work applications'
ADD ON: I cannnot get into bios, i have seen replies of booting from usb, but i cannot get into bios to set 'boot from removable'
Thanks in advance

Try switch off Alimentation cable few minuts (2-3) Do clear CMOS 30sec try again if it don't boot can be damaged bios

Similar Messages

Same problem yet again max speed and ip profile sl...

I have only just had the issue fixed and it is again here it seems to happen between the 3rd and 5th of each month.
Everything was going good 28th august did speed test my max achievable speed was 7150kbps. My ip profile was 2500kbps. My hub setting for noise was at 3.0db/19.0dB
1st September noticed the speed was not as quick did a speed test max achievable speed was now 2000kbps and my ip profile had gone to 2000kbps and my hub noise was on 12.6dB/18.0db
This morning i got a phone call but nobody there checked my speed after as ive had such calls before and after these have happened it affects my broadband WELL GUESS WHAT
my Max achievable speed is now 500kbps and my ip profile is 500kbps and my hub setting shows my noise at 19.1dB/ 16.0dB So again i cant really use my broadband as it takes so long page to load it times out.
this is happening every month now from march and im getting really fed up with it now it gets fixed yep for a short while but then im back to square one again the beginning of the next month . I would like this issue to be fixed for good.

I have done the quiet line test and i hear nothing the modem is connected straight into my main socket which is the only phone socket i have it does have a built in filter in it.
here are todays hub settings that ive just done
ADSL Line Status
Connection Information
Line state:
Connected
Connection time:
0 days, 15:33:46
Downstream:
800 Kbps
Upstream:
448 Kbps
ADSL Settings
VPI/VCI:
0/38
Type:
PPPoA
Modulation:
G.992.1 Annex A
Latency type:
Interleaved
Noise margin (Down/Up):
18.8 dB / 16.0 dB
Line attenuation (Down/Up):
57.1 dB / 31.5 dB
Output power (Down/Up):
16.5 dBm / 11.9 dBm
FEC Events (Down/Up):
55099 / 76
CRC Events (Down/Up):
6444 / 76
Loss of Framing (Local/Remote):
0 / 0
Loss of Signal (Local/Remote):
0 / 0
Loss of Power (Local/Remote):
0 / 0
HEC Events (Down/Up):
11230 / 16
Error Seconds (Local/Remote):
514 / 79
here are the speed test results ive just carried out at the time of 20.19pm
Test1 comprises of Best Effort Test: -provides background information.
Download Speed
448 Kbps
0 Kbps
500 Kbps
Max Achievable Speed
Download speedachieved during the test was - 448 Kbps
For your connection, the acceptable range of speeds is 50-500 Kbps.
Additional Information:
Your DSL Connection Rate :800 Kbps(DOWN-STREAM), 448 Kbps(UP-STREAM)
IP Profile for your line is - 500 Kbps
If you wish to discuss these results please contact your ISP.
If you are experiencing problems with specific applications, servers or websites please contact your ISP for assistance.
Your test has completed please close this window to exit the performance tester.

Japanese Character Problem Yet Again!!

Hi,
While trying to run a query( containing Japanese characters ) through my java code, I get the following SQLException:
[Microsoft][ODBC SQL Server Driver][SQL Server]Unclosed quotation mark before the character string '[email protected]'.
However if I run the same query through the SQL Query Interfcae manager, it runs just fine.
I am attaching the query too.
Insert into Registration(nvchCustomerID,dtCreationDate,nvchLoginID,nvchPassword,nvchRemindQuestion,nvchOtherRemindQuestion, nvchRemindAnswer,intReceiveEmail,nvchEmailAddress) values('NI200205010001','20020501','ydipak','ydipak','��l��','null','ydipak',1,'[email protected]');
Any help in this direction would be greatly appreciated.
Thanks and Regards

Thw simplest solution to this problem is to use PreparedStatement.
prepare a statement like insert into table values(?,?,?,?,?)
and use bind variables like
pstmt.setString(1,"��l��")
pstmt.setString(2,"��l��")
etc...
saifuddin

MacBook Pro Boot Problems Yet Again

Earlier last month, I posted a topic about how my Macbook Pro "crashed" and I ended up having to reformat my HD and it was working fine afterwards as long as I didn't install any OS X updates.
Just yesterday my Macbook started to just randomly freeze every two seconds when I went to open something, or type a simple word, or just when it started up & loaded the desktop period.
I ran the disk utility to try to verify/repair the disk and that did not work, I kept receiving the message "disk cannot be repaired, please backup, reformat and restore, blah blah" ...
PROBLEM IS.
Now when I turn it on, it always wants to boot in safe mode, but as the little bar is loading, it shuts the entire computer off before it even finishes loading (it starts to load and about less than a min later it shuts off). It happens EVERY TIME I turn my Mac on. What is the problem? Does AppleCare cover this? I've only had my Mac less than a year and already I'm experiencing problems that I shouldn't be having AT ALL.
I don't live close to an apple store, and I'm in college, so I can't just up and drive hours away to find a store.
I have an iPhone 4 and iPod Touch 4th Generation now I'm afraid to even sync it with the Mac when it is fixed because I don't want to lose everything.

Look at these data recovery tools if you aren't backed up:
http://www.macmaps.com/backup.html#RECOVER
Purchase AppleCare if you haven't already. You can do so anytime in the first year.
AppleCare by phone can usually with notebooks setup a mailin to repair with as little as 36 hour turn around in the U.S. The issue you are having may actually be a dying hard drive, or it may just need purchasing Alsoft Disk Warrior, or it may be a power supply issue or RAM issue. As long as it is Apple installed RAM, that's normally covered under warranty if nothing was dropped or damaged by bumping. Same with power supply. A bad power supply in the room can cause power supplies on computers to fail. A good APC surge protector can help protect a computer against spikes and surges not caused by lightning and some poor power. Other poor power has to be diagnosed by an electrician. Good luck!

Wireless problems, yet again :(

Hi im new here but im hoping maybe someone can help me out
I have had problems with BT's Wireless for some time now, I will always get disconnected, so I always have to keep changing the channel which sometimes works, but now my computer will not even connect wirelessly at all but I can connect through an ethenet cable, anyway while I try to connect wirelessly this message keeps coming up
"The settings saved on this computer for the network do not match the requirements of the network", now I have tried changing the channels that does nothing, I have reset the internet nothing, I also tried changing the channel selection from manual to automatic and still nothng, even when I call for help the only things they told me to do I have already done, Im getting quite fed up of having to try and sort these problems, If anyone has any idea of how they can help me I would be very greatful.

You have probably already tried this but:-
Make sure you have the correct SSID & Wifi Encryption passphrase handy.
Remove ALL the wifi SSID connections from you Adaptor & temporarily close the Networking Box. (to make sure the settings are updated.)
Open the Network settings dialogue & re-enter the correct SSID & passphrase.
I hope that helps?
"I have this awful feeling someone is watching every move I make (one of my pet hates is router location tagging)." Marvin (A paranoid Android)

Restate my problem - YET AGAIN

I have simply created a loader that loads up a swf. Then that
loaded swf needs a way of removing the content that is first
visible in the new swf. The new swf creates a loader, but it simply
loads over the top of that first lot of content rather than
removing it.
Even though Im specifying an index eg: loadChildAt(1,loader)
it doesnt replace the content sitting there from the previous
loader, just places it over the top etc.
HELP!!

I think there is a misunderstanding of how objects a stacked
in display list.
When you place an object into a certain index (z-position) -
the object that resided in this position is not removed/replaced
but is moved one level up - and all the objects above the new
object are moved one position up. For instance, if you have three
objects (top to bottom):
objC in position 2
objB in 1
objA in 0
and you addChild(objD, 1); - your stack order become:
objC in position 3
objB in 2
objD in 1
objA in 0
An analogy could be slipping a card into a card deck.
There are no gaps in display list stacking order in AS3.
As for the stage nullification - frankly it looks a bit
strange for stage should always present. Try:
while (stage.numChildren > 0) {
stage.removeChildAt(0);

Snow Leopard and HP LaserJet 4mv print problem (yet again)

All
This has been discussed before, I have read all the posts and I cannot get my iMac to print to my trusty Laserjet 4MV now that I am running SL 10.6.4
I have tried:
Downloading the latest release of drivers
Loading the 'optional' packages off the SL DVD
Downloading Gutenprint drivers
Configuring the 4MV for IP connection with 192.0.0.192 as the IP address and 255.255.255.0 as the subnet mask address then using 192.0.0.192 in the printer setup.
I have tried a 'cold restart' of the 4MV which has cleared all my settings and made 0.0.0.0 as the IP address and 0.0.0.0 as the default gateway.
None of these have caused the printer to be seen by the iMac.
Does anyone have any other suggestions?
Many thanks.
Niall

Kappy
You - If you open Network preferences what is the IP address of the Gateway address?
(Configure IPv4 is set to Using DHCP) IP is 192.168.254.100
You- What route are you using to connect to your cable/DSL modem? We have a Speedtouch 510 broadband router supplied by our broadband provider running into a 3Com OfficeSwitch 8 port box and Ethernet (Cat5) cabling out to points around the house.
You- Don't you have the user manual? Yes and its pretty hopeless. The online manual is more extensive but doesn't include a menu map for the MIO menu. I have found a step-through on the web and have now successfully changed the settings on the 4MV (probably to the wrong ones) and done a 'cold reset' back to the factory defaults (0.0.0.0).
I'm getting the impression that its the IP address that I've used that is wrong. I took 192.0.0.192 from the 4MV test menu printout. Should I have used the addressing from the Network Prefs?
Regards and thanks.
Niall

Double up of my document folder If I click on my Documents in finder it then opens another selection of folders including yet another documents folder which if this one is clicked on the folder is repeated yet again this does not appear to be correct help

I believe I have a problem when opening up my documents in finder. where upon I can view all my folders but with yet another Documents folder within this group, if I then click on this second Documents folder yet again a repeat of the do'cs folder appears. I have tried to merge the Documents folders into one but after a morning and a few hours later having completed the merge when I reopened the folders the problem was still there. Help.
Sandra

Reset the PRAM
Reinstall the operating system from the dvd (you will not loose your data)

My iPhone 5 crackles and pops loudly during calls (with and without speaker phone.) I'm experiencing this same same issue on my third iPhone. Is this a common problem? Short of getting the phone replaced (yet again!) is there a solution?

My iPhone 5 frequently crackles and pops loudly during calls (while using speaker phone, as well as not using speaker phone.) After being inspected by techs at the Genius Bar, my phone has been replaced twice; thus, I am currently on my third iPhone 5. Incredibly, I am, yet again, experiencing the exact same issue. Short of getting my fourth iPhone, is anyone aware of a solution?

if it's the exact same issue, either it's a problem with your service or with your software if you're restoring from a backup each time. it's pretty darn near impossible for 3 phones to have the same exact hardware issue, so that's unlikely. is this an at&t iphone? if so, are you continuing to use the same sim card? if so, get a new one and try that out. if that's not the issue, restore the phone as new and make a few phone calls. if the issue's gone away, there's something wrong with your backup

YAPP (Yet Another Printing Problem)

I've found another printing problem - this time with colour printing.
To my
surprise, Forte (3.0.E.0) can print in colour (at least on a HP 690C,
using
NT drivers for the 660C, the printer being connected to a Win95
machine).
I can print OK with from my NT develpoment machine in colour, but when
running
the same app from the Win95 client with the printer attached locally the
coloured text disappears. Has anyone else come across this problem?
Is this another of the 'Printing works fine as long as it happens
non-locally?'
features?
Thanks
Jamie Anstice
Programmer/Analyst, University of Canterbury
New Zealand

I can print OK with from my NT develpoment machine in colour, but when
running
the same app from the Win95 client with the printer attached locally the
coloured text disappears. Has anyone else come across this problem?Hi Jamie,
I wonder if this is related to the printing feature I discovered
where things I print from Forte have a strong tendency to come out in
the same colours as my windows desktop, which is
typically yellow-on-black.
- Ed
================================================================================
Eduard E Havelaar, Information Services Section, University of Canterbury
email: [email protected]
phone: +64-3-366 7001 extn 8910
fax: +64-3-364 2999
snailmail: Private Bag 4800, Christchurch, New Zealand

SOS! Agh, yet again!

Bought Toshiba L55 Laptop Aug.6,2014(had a bad feeling about it that day!) Anyway, after emailing a division of Microsoft about all the issues I have had with this brand, yet again, its back!
1)Found log filed first week showing Tos. employee, while on the job, played enourmous amounts of games, not to test either in folders in obscure areas of System32 quite by accident.
2)First week, after this, found what were logs by "said employee", downloading and installing every Internet Security program on the market to date!
3)Second week, found what I affectionately call " space litter " computer test logs, that employee did not have courtesy to remove.
4)Second week, got curious about what one of my favorite software programs had today. The msinfo.ex program is a "desktop view" if you will, of the registry, so you do not have to mess with?? Regedit.exe. Oh my goodness, invalids everywhere. Toshiba
employee put their own UEFI on top of the Windows UEFI, INCOMPATIBLE? Yepper!
4)Week 3, found logs everywhere stating Tos. employee did not know if my edition, was a) Windows Xp, Windows 7, 7 64, Vista or 8.0 or 8.1. Hello? What did I pay for again?(Windows 8.1).
5)Found logs that stated Tos. employee did not know what kind of harddrive he or she (he) was mounting. Emp. had to connect remotely to find out, then proceeded to change volume serial numbers of all partitions. Incompatible because the Microsoft Serial
numbers did not go away. Return? I will get to that....if not today, another day.
6)Weeks 4 to present day...started getting locked out of primary NTFS HDD partition. Because I had no clue by second and third time, Toshiba had me already send for HDD repair...
7)Last week started having same issues had b4 repair. Did searches and thanks to some "wise sages" at Microsoft, found out about Bitlocker, TPM, DPAPI, Cipher and Fvevol. Do any of these work? Heck no because....you guessed it!
Incompatible again! or, fool at Tos. took them off!
Latest? Found log that machine auto-generated key for said Tos. employee so I have the great fortune not to be able to!
Not only this, but at UEFI F11 when it asks for key, of course I don't have it! No wonder! Cannot generate new one when already assigned!
Even if I could? Animated supervisor keybox only 8 digits long! F8 key? Fool took it off and I was in process of putting it back last night and all was fine at bedtime!
This morning? Ha! Goes to f8 screen, then again to f11, will not go to rcovery or repair, so instead I get this huge black screen that says "fvevol.sys missing or some driver device, error 0xc000000f, contact your system admin." No
duh!! The privacy expert at Microsoft said I should sue them, would, can't afford. There is no command prompt and no, I did not do anything! Urgh! I get "Boot Edit Screen at C:\Windows\System32\winload.efi......[/no execute optin
/no vga................]
So before I exhaust myself with the " Return story", does anyone know how to help? I do not have OS disks because Tos. to cheap to include and you ought to have seen the registry b4 this happened...(sheww, help?)

You need to Restore Default Startup Type for BitLocker Drive Encryption Filter Driver but problem is you are unable to boot.
Can you
refresh or reset your OS?
If the above fails then unfortunately you need the installation or recovery media to fix this.
As your laptop is under the warranty so I shall suggest you to contact Toshiba support for help and assistance.
S.Sengupta, Windows Entertainment and Connected Home MVP

How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance

How can I stop music and movies from being automatically deleted from my phone and saved on the cloud? I've just tried to watch a movie on my 2 hour commute, but yet AGAIN it has been removed. I do NOT want to spank all of my data allowance downloading it again, especially because (believe it or not) I added it to my phone because that's precisely where I wanted it!! Any help much appreciated

FYI I had to put this link into firefox to reply - because **** back safari just wouldn't register my clicks to any of the links on the post... Despite reloadeing and even restarting my computer. Totally annoying and a massive pain in the ***.
But in terms of my initial query; thanks for responding. But no, this is NOT the cause of the problem. I have auto sync and sync over wifi activated, but have also selected manually manage music and videos. Plus, all of my music and videos are on my macbook, absolutely all of it, so if it my phone was syncing with my macbook everything would still be on the phone. Life would be peachy if my phone jsut copied everything that was on my macbook, but unfortuantely it keeps deleting tracks for no apparent reason.
Any thoughts greatly welcomed, because at the moment i can only conclude that my iphone is crap.

Screen resolution yet again

Although this forum has taught me a lot about screen
resolutions, view ports
etc. I am still struggling.
I am on a broadscreen laptop with screen resolution 1440 x
900 - at the moment
perhaps uncommon, but possibly gaining popularity.
I have a relativeley positioned div containing an absoluteley
positioned div,
that has an image in it, all in a table with fixed width.
The image in the absolute pos. div shifts as I change the
view port. Why is
that? I would expect it to always sit the specified px's away
from the
container div.
http://www.spinsister.nl/blog/index.php
, I am talking about the two pictures
in the entry 'Vanuit de verte', at the moment at the top of
the page.)
Sorry to have to ask about this yet again. I read Nadia's
article several times
and thought I understood, but obviously don't.
Regards,
Adriana.
[ put out the rubbish if you need to reach me by e-mail ]
www.spinsister.nl

Anyhow, you need a) to validate the page, and b) to put a
valid and complete
doctype on it so that you get out of quirks mode.
</tr>
<tr>
<td bgcolor="#ffffff"><table width="770">
<tr>
<td valign="top" bgcolor="#ffffff"><div
id="entryview">
This is clearly invalid code, as is this -
</tr>
</tr>
Also, you have HTML in your CSS files (there should only be
CSS in CSS
files) -
<style type="text/css">
I see what you are experiencing, and my experience tells me
that something
on the page is working in ways that you don't expect.
Personally, I
wouldn't use a table-based layout at all, but I realize you
are already
committed to it. Also, try adding borders to this rule -
.gallerycontainer{
position: relative;
/*Add a height attribute and set to largest image's height to
prevent
overlaying*/
and you'll see that it's not being expressed at all. That's
likely the
source of your problem.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"A.Translator" <[email protected]> wrote in
message
news:[email protected]...
>> Seems to me that those two images are doing exactly
what you want them to
>> do (IE6 and FF1.5x). They retain their relative
position on any browser
>> viewport width.
>
> Not on any, at least not the way I understand view
ports.
> To illustrate my question I put two screen shots online
>
http://www.xs4all.nl/~hogen/voorbeeld/
>
> In both shots I hover over the thumb to expose the
larger image to the
> right. In the top one the off set works as intended -
notice: on the left
> FF's Webdeverloper's Toolbar CSS editor is open making
the viewport
> smaller.
>
> The screen shot underneath shows the same, but now in
full screen.
>
> Sorry for the horizontal scroll bar that you'll probably
get but you
> appreciate in this case I had to keep the images full
size.
>
> --
> Regards,
> Adriana.
> [ put out the rubbish if you need to reach me by e-mail
> www.spinsister.nl
>
>

Quicktime stealing file associations yet again

I just want to say how fed up I am of Quicktime. It has been stealing file associations for years now, and everytime it happens I have to find out how to get them back again to the way I want it - and yet again, the 'changes' seem to have no effect. What is WRONG with Apple? It seems they are belligerently determined to mess with my time and I really have had enough of it.
OK, any help please:
Quicktime version 7.6.9, Windows Vista.
I would like to be able to click on a .wav extension or a .mp3 extension and have it open in windows mediaplayer, NOT in a hijacked Quicktime web page that prevents me from clicking through to anything else.
I have tried the following:
Edit\Preferences\Quicktime Preferences\Browser\Filetypes...Mime Settings - cannot uncheck associations with Quicktime! (way to be a *******, Apple!), the settings on wav and mp3 still showed Windows mediaplayer
Checked also the 'default programs' application in Vista itself. all looks in order there too.
Apple *****.

Re Tracer -- did this work for you? I have the same problem, but when I disable the QuickTime add-ons in Internet Explorer (one of the numerous attempted "fixes" I've tried), the only result is a QuickTime window still opens, but will not play the movie clip. This has not restored my ability to use Windows Media Player to view mpeg files.
I don't know if it makes a difference, but my OS is Windows 7, and I'm using the latest version of Internet Explorer (10, I think -- I'm not at my own computer)
If you were able to fix this annoying problem, could you please post your solution (assuming it's not the one suggested by pmarangoni, which as indicated above, didn't work for me)

Query optimization..yet again...

Guys,
I need some advice yet again for tuning my query.
The query below takes hell lots of time for execution(earlier ther performance was very much appreciable).
SELECT 'B'||','||FD.GEO_ID||','||FD.PROD_ID||','||','||','||','||','||','||SUM(FACT_AMT_18-FACT_AMT_16)||','||NVL(FD.ISO_CRNCY_CODE_CHAR, 'USD')||','||FD.DUE_PERD||','||FD.MEASR_ID content
FROM AGG_FACT_605 FD
WHERE DUE_PERD = TRUNC(LAST_DAY(ADD_MONTHS(SYSDATE,-3))) + 1
AND FACT_TYPE_CODE='A8'
AND FD.PROD_ID IN (SELECT DISTINCT DSEND_ID FROM PROD_ASSOC_DNORM WHERE CTRL_PERD='20-SEP-06' AND STRCT_CODE='722' AND PARNT_ID='000000011' AND DSEND_LVL=8 )
AND FD.GEO_ID IN
(SELECT DISTINCT DSEND_ID FROM GEO_ASSOC_DNORM WHERE STRCT_CODE='705' AND CTRL_PERD='02-OCT-06' AND DSEND_LVL=6
MINUS
SELECT DISTINCT DSEND_ID FROM GEO_ASSOC_DNORM WHERE STRCT_CODE='705' AND CTRL_PERD='02-OCT-06' AND DSEND_LVL=6 AND PARNT_ID='948')
AND FD.MEASR_ID IN
('900005','900015','720000','770000','900038','900039','900031','900030')
GROUP BY FD.GEO_ID,FD.PROD_ID,FD.ISO_CRNCY_CODE_CHAR,FD.DUE_PERD,FD.MEASR_ID
ORDER BY FD.GEO_ID,FD.PROD_ID,FD.ISO_CRNCY_CODE_CHAR,FD.DUE_PERD,FD.MEASR_ID;
| Id | Operation                   | Name                  | Rows | Bytes | Cost | Pstart| Pstop |
|   0 | SELECT STATEMENT            |                        | 10546 |   628K|   377K|       |       |
|   1 | SORT GROUP BY              |                        | 10546 |   628K|   377K|       |       |
|   2 |   HASH JOIN                 |                        | 9558K|   556M|   284K|       |       |
|   3 |    VIEW                     | VW_NSO_2               |    89 |   801 |    28 |       |       |
|   4 |     MINUS                   |                        |       |       |       |       |       |
|   5 |      SORT UNIQUE            |                        |    89 | 1869 |       |       |       |
|   6 |       PARTITION RANGE SINGLE|                        |       |       |       |   KEY |   KEY |
|   7 |        INDEX FAST FULL SCAN | GEO_ASSOC_DNORM_IDX2   |    90 | 1890 |     1 |   KEY |   KEY |
|   8 |      SORT UNIQUE            |                        |     1 |    26 |       |       |       |
|   9 |       PARTITION RANGE SINGLE|                        |       |       |       |   KEY |   KEY |
| 10 |        INDEX FAST FULL SCAN | GEO_ASSOC_DNORM_IDX3   |     1 |    26 |     1 |   KEY |   KEY |
| 11 |    HASH JOIN                |                        | 6766K|   335M|   284K|       |       |
| 12 |     VIEW                    | VW_NSO_1               | 5273 | 52730 |   235 |       |       |
| 13 |      SORT UNIQUE            |                        | 5273 |   190K|   235 |       |       |
| 14 |       PARTITION RANGE SINGLE|                        |       |       |       |   KEY |   KEY |
| 15 |        INDEX FAST FULL SCAN | PROD_ASSOC_DNORM_IDX3 | 5297 |   191K|   189 |   KEY |   KEY |
| 16 |     PARTITION RANGE ITERATOR|                        |       |       |       |     1 |     2 |
| 17 |      TABLE ACCESS FULL      | AGG_FACT_605           |    23M|   936M|   284K|     1 |     2 |
[\pre]
I beleive the problem is due to full table scan on 'AGG_FACT_605' table which contains about 1395678439 records.
If I create a partitioned table and then make use of the above query on the partioned table, what would be the best bet of column to have the partition on?
Can I've partition on combination of column values?
Any other advice to tune my query?
Help me out...
Bhagat
Message was edited by:
        Bugs

First off you must have current stats gathered -- as has already been noted.
Beyond that there are a couple of simple things that you can do.
1) You don't need the DISTINCT clause in your sub-queries -- and it may be getting in the way of the optimizer making a bit better guesses.
2) You don't need the MINUS in your 2nd sub-query, you can use (parnt_id IS NULL OR parnt_id='948') instead.
Now if you're still seeing a full table scan on your fact table you need to ask what approach would be better than a full table scan. How selective is (i.e. what proportion of the data corresponds to) each of your predicates? In particular, how much of the data corresponds to:
1) DUE_PERD = TRUNC(LAST_DAY(ADD_MONTHS(SYSDATE,-3))) + 1
2) FACT_TYPE_CODE='A8'
3) FD.PROD_ID IN (blah)
4) FD.GEO_ID IN (stuff)
Hopefully at least one of those eliminates a significant proportion of your data such that an index can be used to retrieve only the relevant rows.

Another X48C problem, yet again

Similar Messages

Maybe you are looking for