Answer FaceTime communication with End User Accepting the call

Hi,
Here is the case, I need the iPad (FaceTime or something else) that will permit me to call an elderly person and talk to this person without having the reciever (the elderly person) of the call do anything.
Calling this person and that the call is answered automatically.
I need this becaue this person has visual and memory problems. If she see's it she might
not remember she needs to press to accept the communication or even worst she
will not see the button she need to press to accept the incoming call.
Does anyone have an idea if this can be done on iPad ?
Eric

The provisioning of the Machine PAC, which is needed for machine context connections, is accomplished using the server certificate or machine security identity (SID). Machine PACs are only supported in newer versions of authentication servers (ACS 4.0 or later) which have been upgraded to support EAP-FAST v1a.
To make a make a machine connection before the PAC has been provisioned, the CA certificate used to trust the server certificate must be placed in the proper Windows Certificate Store (Local Computer-Trusted Root Store).
The host must also provide these machine credentials:
•Active Directory provided machine certificate. The authentication method must support the use of a certificate to provide machine client credentials - the server must be appropriately configured to call for an inner tunnel method of TLS.
•Active Directory provided SID (password). The authentication method must support the use of a password to provide machine client credentials.
Finally, the FAST authentication server must be configured for auto creation of administrator's unique machine PAC information.
http://www.cisco.com/en/US/docs/security/cta/2.1.103.0_supplicant/admin_guide/ctaSuppl.html#wp1026518

Similar Messages

  • CVP call server logs - Hi All, I am trying to figure out whether caller party(End User) hangup the call first or UCCE Agent

    CVP call server logs
     Hi All,
    I am trying to figure out whether caller party(End User) hangup the call first or UCCE Agent.
    Attaching CVP call server Logs& UCCE TCD& Route Call Details for your reference.

    From the CVP logs, it can be determined which side disconnected the call first. For each call, CVP keeps track each call leg. From Inbound Gateway to CVP is INBOUND leg, rest are OUTBOUND leg. You can then look at which leg the SIP BYE message is received first.
    Since you have very basic log enabled, you will not see the exact SIP message. But it can be determined by the outcome of the message. Here is the snippet of the log during the disconnect:
    Line 3766: 3083689: 10.180.245.43: Sep 12 2014 12:21:11.293 -0700: %CVP_8_5_SIP-7-CALL:  {Thrd=DIALOG_CALLBACK.6} CALLGUID = CBCCDD8539E811E4A3E2CCEF48565980 LEGID = CC65CE04-39E811E4-87DFD7D1-64B198F2 - [INBOUND] DURATION (msecs) = 25610 - DIALOG TERMINATED. Reason: Q.850;cause=16
    Line 3768: 3083690: 10.180.245.43: Sep 12 2014 12:21:11.293 -0700: %CVP_8_5_SIP-7-CALL:  {Thrd=DIALOG_CALLBACK.6} Sending BUS MSG:>>HEADERS: (JMSType)=MsgBus:CALL_STATE_EVENT (JMSDestination)=Topic(CVP.SIP.CC.EVENT) (JMSTimestamp)=1410549671293 >>BODY: callguid=CBCCDD8539E811E4A3E2CCEF48565980 RouterCallKey=6472 RouterCallKeySent=true causecode=1 timezone=America/Los_Angeles RouterCallKeySequenceNumber=0 version=CVP_8_5 labeltype=1 RouterCallKeyDay=151099 calldate=Fri Sep 12 12:21:11 PDT 2014 label=190376 localOffset=-420 eventid=6 calllegid=CC65CE04-39E811E4-87DFD7D1-64B198F2  >>STATE: isTabular=false isWriteable=true cursor=-1  
    The first Termination message came on the INBOUND leg which is the PSTN. That means, PSTN side disconnected the call first.
    Hope this helps.
    Abu

  • I can't facetime with anyone, it starts the call and ends it immediately on its own. Any suggestions on what I am doing wrong?

    I can't facetime with anyone, it starts the call but ends it immediately on its own. Any suggestions on what I am doing wrong?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of this test is to determine whether the problem is localized to your user account. Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
    While logged in as Guest, you won’t have access to any of your documents or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this behavior; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
    Test while logged in as Guest. Same problem?
    After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
    *Note: If you’ve activated “Find My Mac” or FileVault in OS X 10.7 or later, then you can’t enable the Guest account. The "Guest User" login created by "Find My Mac" is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.

  • I receive Facetime call and when i accept the call. Nothing happen ! I often use Facetime with this friend without problems. The same happen on my iPad...

    I receive Facetime call and when i accept the call. Nothing happen ! I often use Facetime with this friend without problems

    I'm having similar issues.  The iPhone4's face time works just as it always did but the iPad4 is not working.  I can place a call but it won't connect, others can call and it rings but never connects.  I've signed in and out of iTunes, removed and reinstalled the wifi, hard restart, and anything I can think of.  It's driving me nuts!

  • TS3367 when i try to FaceTime on my iPod touch, and the call gets accepted it says connecting... and then just goes to FaceTime failed. this started after a 800 number called my FaceTime. i have tried putting in several other emails & on diff wifi. sugges

    when i try to FaceTime on my iPod touch, and the call gets accepted it says connecting... and then just goes to FaceTime failed. this started after a 800 number called my FaceTime. i have tried putting in several other emails & on diff wifi. suggestions??
    i have also tried facetiming with several other people. the same thing has hapened every single time and it has always worked just fine until that 800 number called me.

    Judging by all the posts on the forum, there seems to be an issue at Apple's end, although they have made no announcement on their status page. Some users have reported that Apple is aware of the issue.
    http://www.apple.com/support/systemstatus/

  • PAC Provisioning Fails Without End-User Accepting PAC Pop-up

    We have lots of workstation on wheels. We use EAP-Fast with Cisco ACS for authentication. When a user isn't in front of the WOW and the PAC pop-up times out, it disables the WOW and causes problems.
    Has anyone used some form of auto-accept method with the Intel PRO-Set so as to not require end-user acceptance of the PAC pop-up message?

    The provisioning of the Machine PAC, which is needed for machine context connections, is accomplished using the server certificate or machine security identity (SID). Machine PACs are only supported in newer versions of authentication servers (ACS 4.0 or later) which have been upgraded to support EAP-FAST v1a.
    To make a make a machine connection before the PAC has been provisioned, the CA certificate used to trust the server certificate must be placed in the proper Windows Certificate Store (Local Computer-Trusted Root Store).
    The host must also provide these machine credentials:
    •Active Directory provided machine certificate. The authentication method must support the use of a certificate to provide machine client credentials - the server must be appropriately configured to call for an inner tunnel method of TLS.
    •Active Directory provided SID (password). The authentication method must support the use of a password to provide machine client credentials.
    Finally, the FAST authentication server must be configured for auto creation of administrator's unique machine PAC information.
    http://www.cisco.com/en/US/docs/security/cta/2.1.103.0_supplicant/admin_guide/ctaSuppl.html#wp1026518

  • How to Use the same iview for both KM End User and the KM Administrator

    Hi friends,
    *This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
    Menu Options.
    i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
    Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
    the presentation settings for the KM Folder u201EReports_kmFolder‟.
    Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
    -> Km Content. Click on Details link of the folder reports_kmFolder.
    Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
    Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
    Click u201EOK‟.
    Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
    Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
    How rto resolve this????
    Regards,
    Prasad.

    Hello Prasad,
    Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
    Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
    Regards,
    Lorcan.

  • I have itunes on a mac with 2 users but the library only shows on the main user how can both users have the same library?

    i have itunes on a mac with 2 users but the library only shows on the main user how can both users have the same library?

    Hi,
    Have a Look at these Links on Home Sharing:
    http://support.apple.com/kb/HT4620
    http://support.apple.com/kb/HT3819
    Could be what you need...
    Cheers,

  • Does home sharing allow me to share my iTunes library with other users on the same imac

    Does home sharing allow me to share my iTunes library with other users on the same imac? 

    Apparently so (as long as each user operates out of a different Mac User account).
    After setting up home sharing in the various different user accounts on the Mac, you need to have iTunes open in the account that you want to Home Share from.
    Now use fast User Switching to get into the account that you want to Home Share to. Launch iTunes in there. The library in the other account should appear as shared for you.

  • How do i share my itunes library with other users on the same mac

    I'm trying to share my itunes library with other users on the same mac.  I have tried moving my library to a public folder but when the other user logs in they can't see it in the public folder?

    Presuming you moved the entire iTunes folder to the shared folder the other users need to start their iTunes while holding down the option/alt key and select the iTunes Library.itl file in the shared folder.  Only once should be necessary.  Note that any changes anybody makes will be seen by everybody, so you have to trust each other a lot.
    If all you moved are media files each user will have to add those files to their iTunes library. 
    iTunes: How to share music between different accounts on a single computer - http://support.apple.com/kb/HT1203 - relocating iTunes' media folder to a shared area but leaving separate library files - extra tip at https://discussions.apple.com/message/17331189 Chris CA's instructions on sharing one iTunes music library between multiple user accounts - https://discussions.apple.com/message/8974074 - Multiple users using a single library file - similar post at: https://discussions.apple.com/thread/3753008 Suggestion by Turingtest for multiple users and one library - http://discussions.apple.com/message/9117622 - use smart playlists and tags to isolate groupings.

  • How can i share documents with different users on the same mac?

    How can i share documents with different users on the same mac?

    Shared how? The other users can read the documents or you all can read and write the documents?
    The first is easy just place the documents in /Users/Shared anyone can access the files there and the other users will be able to read them.
    The second is a bit trickier.

  • How can I share Quicken and other apps with another user on the same iMac?

    I would like to share some apps including Quicken with anoter user on the same iMac. I have put the Quicken app and the .QFX file in /usrs/share and changed the permissions to R/W on both files but when I log in as the other user and run Quicken it does not use the .QFX file and instead comes up with no accounts.

    The Quicken app. should be in the Applications folder at the root of Macintosh HD. It's accessible to all users from there.
    To share a file, (this from Finder Help menu)
    "Sharing files with others who use your computer
    You can share files with others who use your computer by placing the files in the Public folder in your home folder. Anyone with an account on your computer can read or copy the items you put in your Public folder (except for your Drop Box folder, which only you can open).
    To share files using your Public folder:
    Copy the files you want to share into your Public folder, inside your home folder.
    To give a copy of a file directly to another person, copy it to their Drop Box folder (inside their Public folder), where only they can see it."
    When opening a file just double-click the file - it will open the application automatically.

  • How to share iphoto with two users in the same imac maverick

    I can´t find the way to share iphoto/itunes with two users in the same imac with maverick software

    In conclusion, the new software is worse than the old one, really?  Because in my old mac I could share easily without copy with an external USB
    It's not iPhoto that dropped the ball but the system.  I believe it was Mavericks that broke the Shared folder compatibility for iPhoto, not iPhoto itself.
    Also having the library on an external HD is a good way of freeing up space on the boot drive to assure optional system and application performance.

  • How do I share photos in I photos with other users on the I mac

    How do I share photos in I photos with other users on the I mac

    iPhoto: Sharing libraries among multiple users

  • How do I move organized photos from dropbox to iPhoto and share with another user on the same mac?

    I have about 3,500 photos sitting in dropbox and just purchased my first mac yesterday.  My husband and I each have our own Ipad and our own user id's on the mac.  I moved two of the folders to Iphoto and it shows up on my screen in the right folders.  However, on my Ipad, it shows all of them under one Photostream and not organized.  They don't show up on my husband's "side of the computer" at all. 
    So my questions are:
    1.  How does one mirror their file organization on the Ipad?
    2.  How does one share all of the folders with another user on the same Ipad so they can view folders, and add pictures to the folders if they like?
    Thanks!

    1.  How does one mirror their file organization on the Ipad?
    If you use the Photo Stream, the organisation in iPhoto will be lost - there is just one endless stream.  YOu could sync your photos using iTunes. Then you will see the synced albums in the Photos.app on the iPad.
    See this link:   iOS and iPod: Syncing photos using iTunes
    How does one share all of the folders with another user on the same Ipad so they can view folders, and add pictures to the folders if they like?
    On the same iPad?  Do you mean on the same mac?
    If you want to share an iPhoto library between two users on the same mac, the iPhoto library should be on a separate disk partition or even better, on a separate external disk. Then you can set the flag "Ignore ownership on this volume" to avoid permission problems. Both of you will be able to browse the iPhoto library and can edit the photos within.
    See this support document:  iPhoto: Sharing libraries among multiple users
    If both of you want to keep separate iPhoto libraries but share the photos, you could share selected albums as Shared PhotoStreams and invite each other to browse them. This would require iOS 7. Do you have iOS 7 on your iPad?  Each Shared Photo Stream will be shown as a separate album on your iPad .
         iCloud: Using and troubleshooting Shared Photo Streams
    Regards
    Léonie

Maybe you are looking for