Any altenate statement for WRITE-TO

Hi Experts,
I am trying to dump or casting data from one internal table to another of different data types......
where i am using WRITE-TO statement....since i need to go through each and every field and i have huge data ..
it is killing my time........
can anybody suggest me any other statement which exactly acts as WRITE TO ..and where i can do this on a fly.....
Regards
sam

Hi,
thank you for your reply
My code is some thing like this:
write wa_vmctmp-counter TO wa_zvmctmp-temp1.
write wa_vmctmp-mem_alloc_local TO wa_zvmctmp-temp2.
temp1,temp2 are my required data types.......
Regards
sam

Similar Messages

How to write procedure or function or any sql statement for requirement

Hi,
i have a table named letter,it contains 2 columns named as letter_id and letter_content.
select * from letter;
letter_id letter_content
103 Dear MFR
103 This is in regards to the attached DM List
103 Please Credit us after reviewing it.
103 Thanks
103 Regards
103 xxxx
108 Dear customer
108 This is to inform that ur DM List is as follows
108 Credit us according to the Dm after reviewing it.
108 Thanks
108 Regards
108 xxxx
now my requirement is,i need send a parameter as letter_id to a procedure or function in pl/sql in oracle,the output should be as follows:
if we will pass parameter(letter_id) = 103 then it displays as follows:
Dear MFR
This is in regards to the attached DM List.Please Credit us after reviewing it.
Thanks
Regards,
XXXXX.
if we will pass parameter(letter_id) = 108 then it should displays as follows:
Dear customer,
This is to inform that ur DM List is as follows. Credit us according to the Dm after reviewing it.
Thanks
Regards,
XXXXX.
---------------------------------------------------------------------------------------------------------

i am really appriciate ur help.
thank u so much for ur suggestions.
when i am uning line_seq its giving an error
ORA-00904: "LINE_SEQ": invalid identifier
so,in my table i had created a sequense named content_seq.
select * from letter;
content_seq letter_id letter_content
1 103 Dear MFR
2 103 This is in regards to the attached DM List
3 103 Please Credit us after reviewing it.
4 103 Thanks
5 103 Regards
6 103 xxxx
7 108 Dear customer
8 108 This is to inform that ur DM List is as follows
9 108 Credit us according to the Dm after reviewing it.
10 108 Thanks
11 108 Regards
12 108 xxxx
then i had used ur code as follows:
select linefrom ( select content_seq , letter_content || case content_seq when 2 then ' ' || lead(letter_content) over (partition by letter_id order by content_seq) end as line from letter where letter_id = 103 )where content_seq <> 3;
LETTER_CONTENT
Dear MFR
this is in regards to the attached DM List Please credit us after reviewing it
thanks
Regards
EXP
but when i take letter_id = 108 the format is comming different.it was unable to combine 2lines.
Message was edited by:
user579585
Message was edited by:
user579585

Is there any alternative statement for OPEN CURSOR?

OPEN CURSOR WITH HOLD l_cursor FOR
          SELECT paledger vrgar versi perio paobjnr pasubnr belnr posnr
                         hzdat usnam gjahr perde wadat fadat budat altperio papaobjnr
                        papasubnr kndnr artnr fkart frwae kursf kursbk kurskz rec_waers
                       kaufn kdpos rkaufnr skost prznr bukrs kokrs werks gsber vkorg
                     vtweg spart hrkft plikz kstar pspnr kstrg rbeln rposn sto_belnr
                     sto_posnr prctr pprctr rkestatu timestmp copa_awtyp copa_aworg
                 copa_bwzpt copa_awsys ktgrd kmhi01 kmhi02 kmhi03 hie04 hie05
                 hie06 hie07 prdha ww003 kunwe pstyv ww150 vsart ww152 ww153
                 ww154 ww155 crmelem ww156 ww157 vbund vv002_me vv001_me vv003_me
                 vv002 vv070 vv071 vv072 vv073 vv074 vv075 vv076 vv077 vv078
                 vv079 vv080 vv081 vv095 vv096 vv040 vv104 vv001 vv003 vv004
                 vv028 vv105 vv150 vv151 vv152 vv153 vv154 vv155 vv038 vv068
                 vv030 vv156 vv157 vv158 vv159 vv160 vv161 vv162 vv035 vv166
                 vv167 vv168 vv169 vv170 vv171 vv172 vv163 vv164 vv165 vv045
                 vv046 vv047 vv059 vv031 vv032 vv039 vv173 vv195 vv194 vv193
                 vv192 vv191 vv184 vv185 vv186 vv187 vv188 vv189 vv190 vv174
                 vv175 vv176 vv177 vv178 vv179 vv180 vv181 vv182 vv183
          FROM (l_table)                                    "ce1na01
          WHERE paledger IN r_curr_ty
          AND   vrgar IN r_record
          AND   perio EQ lv_period.
* Fetch in Packets of 10000
    DO .
      FETCH NEXT CURSOR l_cursor
        INTO TABLE lt_data
        PACKAGE SIZE 10000.
* No More Data
      IF NOT sy-subrc IS INITIAL.
        CLOSE CURSOR l_cursor.
        EXIT.
      ENDIF.
     ENDDO.
This is my current code. while executing it is taking more time so we need optimize this statement. Could you please suggest me.

No.

How to write a case statement for the totals column of two different years (2013 and 2014) of the same month so that I can get a +/- column

Please Help!!!
How to write a case statement for the totals column of two different years (2013 and 2014) of the same month so that I can get a +/- column.
                                  January 2014         January
2013                            +/-
                Region   Entry   Exit Total    Entry   Exit   Total   (Total of Jan2014-Total of Jan2013)
                A               2         3
40        5       7        30                    40-30= 10

What is a table structure? Sorry cannot test it right now..
SELECT <columns>,(SELECT Total FROM tbl WHERE Y=2014)-(SELECT Total FROM tbl WHERE Y=2013)
FROM tbl
Best Regards,Uri Dimant SQL Server MVP,
http://sqlblog.com/blogs/uri_dimant/
MS SQL optimization: MS SQL Development and Optimization
MS SQL Consulting:
Large scale of database and data cleansing
Remote DBA Services:
Improves MS SQL Database Performance
SQL Server Integration Services:
Business Intelligence

How to write Select statement for this codition

I need to check whether SGTXT contains BELNR value.
SGTXT is a text field and It should be matched with BELNR
How to write select statement for this.
Select AUGBL AUGDT into t_BSAD
from BSAD
where SGTXT should have the given BELNR Value.
Plz note : Here I cannot give as SGTXT = BELNR as coz BELNR have only 10 digits.

Hi,
data temp(12).
concatenate '%' belnr '%' into temp.
Select AUGBL AUGDT into t_BSAD
from BSAD
where SGTXT like temp.
If belnr is having multiple values,just create a internal table as follows.
types : begin of ty,
        belnr....
        temp(12),
        end of ty.
data itab_ type standard table of ty.
data wa type ty.
loop at itab into wa.
concatenate '%' wa-belnr '%' into wa-temp.
modify itab from wa index sy-tabix transporting temp.
endloop.
Change your select statement accordingly.
Kindly reward poits if it helps.

For PCI-4451,How to change the frequency of an output signal without any undefined state

I would like to generate a signal using output channels of PCI-4451 and at the same time capture data using the input channels. Is there any method that I can generate a continuous signal without any undefined state when the signal frequency is being changed?
Attachments:
Input_Signal.bmp ‏729 KB

Wee,
DSA boards such as the PCI-4451 have a number of very desirable properties including high precision and a high sampling rate. The trade-off for the combination of these two properties is that the DSA boards cannot adjust their sampling rate on-the-fly. Instead they have to be stopped and reconfigured. During this reconfiguration time, the value of the board's output becomes flat and level.
If you are looking to adjust the board's output without seeing these flat spots, you have to take a different approach to programming a DSA board. Instead of reconfiguring the board, what you need to do is allow the board to continue to run (at the same output frequency), and then overwrite the output buffer that the board reads to output values. This will
allow you to output new data without the flat spots. Below you will find an example that displays this behavior.
If you determine that this is not an acceptable workaround due to the limitations on output rates, you may want to look at using a Multifunction DAQ board (60xx or 62xx) or an arbitrary waveform generator (54xx) device instead.
Best of luck with your application.
Regards,
Jed R.
Applications Engineer
National Instruments
Attachments:
Cont_Gen_Voltage_Wfm-Int_Clk-With_Updates_for_DSA.llb ‏161 KB

Using an output statement for a delete w/o affecting any oracle error msg

Dear all;
I have a delete statement similar to this below
delete from tbl_one t
where t.tbl_one_location = location
and location not in (select distinct p.issuearea from tbl_two p);the delete statement is within a package, however what i would like to do is output a simple message to show if the delete was successful meaning that an actual item was deleted and if it wasnt successful output another statement for that.
I have an idea in my mind which is to keep track of the number of items in tbl_one before the deletion and then check the count after deletion and if the count is less, then the deletion was successful...hence output the message. Is this the best way to go about it or is there an easier way to do this.
Thank you, All help is appreciated.

All u need is this -
SQL%ROWCOUNTPlease see the folowing -
SQL> select empno
2    from emp;
     EMPNO
         1
         2
         3
         4
         5
SQL>
SQL> BEGIN
2     DELETE FROM emp
3           WHERE empno = 1;
4
5     IF (SQL%ROWCOUNT > 0)
6     THEN
7        DBMS_OUTPUT.put_line (SQL%ROWCOUNT || ' Rows Deleted.');
8     END IF;
9 END;
10 /
1 Rows Deleted.
PL/SQL procedure successfully completed.
SQL> select empno from emp;
     EMPNO
         2
         3
         4
         5
SQL> Hope this helps..
Formatted the code..
Edited by: Sri on Mar 22, 2011 8:31 AM

Sql statement substituion - any special rules for formatting the query?

Hey,
I was wondering - are there any special rules for formatting the query that is to be substituted?
I am asking, as somehow I am unable to make the DSP substitute my query. I took the basesql from the server console (to make sure that I have the correct version), configured a query substitution, and well, nothing happens.
I've tried to substitute it with a modified version of the original query (where NVL(,0) is changed to NVL(,-9999)), then also with select * from dual (which I hope would generate some error), but DSP is ignoring everything...
The query is rather big (400 lines), so maybe I need to format it somehow? I've noticed that in the docs (http://edocs.bea.com/aldsp/docs25/admin/server.html#wp1049919) that the query used in the example has all leading spaces removed. I've tried that, but DSP is still not doing any substitution...
Any suggestions welcomed...
Thanks,
Leszek

Michael,
I am doing everything as in edocs, retrieving from logs the basesql (so with place holders). I've removed all new lines (so the query is now in a single line) and all excessive blanks (so all double/more blanks replaced with a single blank). Still the DSP is like ignoring the substitution. I've tried to do it even with a simple query, like:
SELECT t4."PRODUCT_ID" AS c1, t4."PRODUCT_NAME" AS c2 FROM {DB}.{SELECTION} t1 JOIN {DB}.{CUSTOMER_FACT} t2 ON (t1."VAL" = t2."CUSTOMER_ID") JOIN {DB}.{CUSTOMER} t3 ON (t3."CUSTOMER_ID" = t2."CUSTOMER_ID") JOIN {DB}.{PRODUCT} t4 ON (t4."PRODUCT_ID" = t3."PRODUCT_ID") WHERE ((? = t1."SESSN_ID") AND (t1."NAME" = 'CUSTOMER_ID') AND (t3."DELET_DATE" IS NULL) AND (t3."PRODUCT_TYPE" = 11))
am I missing something here? do I need to remove/add something , to make it work?
I've tried removing blanks around = signs (which from the DSP pov results in a different query), sitll with no results.
Edited by xnts at 06/24/2008 7:37 AM

Update statement for object table.

Hi,
I have created one type as
Create type test as object(
ins_by varchar2(30),
ins_on date,
upd_by varchar2( 30),
upd_on date);
and then created an object table as
create table imst(
i_code number(5),
i_desc varchar2(35),
i_op test);
now i am able to insert record in this table as
insert into imst values(1,'Hawkins cooker',test(user,sysdate,'',''));
Above works fine.
But I would also like to update the record with i_op.upd_by,i_op.upd_on with some other values.
Can any body help me specifying how to write a plain update statement for the same.
Regards.
Soumen

Check it out:
SQL> Create type myTest as object(
2 ins_by varchar2(30),
3 ins_on date,
4 upd_by varchar2( 30),
5 upd_on date);
6 /
Type created.
SQL> create table imst(
2 i_code number(5),
3 i_desc varchar2(35),
4 i_op myTest);
Table created.
SQL> insert into imst values(1,'Hawkins cooker', mytest(user,sysdate,'',''));
1 row created.
SQL> select * from imst;
    I_CODE I_DESC
I_OP(INS_BY, INS_ON, UPD_BY, UPD_ON)
         1 Hawkins cooker
MYTEST('APC_LOAD', '12-JUL-04', NULL, NULL)
SQL> update imst i set i.i_op.upd_by = USER, i.i_op.upd_on = add_months(sysdate, 1);
1 row updated.
SQL> select * from imst;
    I_CODE I_DESC
I_OP(INS_BY, INS_ON, UPD_BY, UPD_ON)
         1 Hawkins cooker
MYTEST('APC_LOAD', '12-JUL-04', 'APC_LOAD', '12-AUG-04')
SQL> Smoke me a kipper I'll be back before breakfast.
Cheers, APC

Need Select statement for fetch the details

Hi
i want to fetch particular customer wise sales orderds and that sales order No and date of sales order was created.. and that sales order related PO No and Materials ..
for this.. how can i write an executable programm.. is it needed to define seperate internal tables or single internal table is enough ?
what is the select statement for fetching all these details..
any help will be appriciated
Thanks
Bbau

custmer master table is KNA1 knb1 knbk
sales data tables r VBAK VBAP VBEP
Material data MARA, MARAC, MARD
PO RELATED ekko ekpo eket
<REMOVED BY MODERATOR>
Edited by: Alvaro Tejada Galindo on Feb 13, 2008 3:04 PM

Missing read stats for zpool iostat?

All,
I'm working on benchmarking a T5240 w/ ZFS storage pools and a new Hitachi AMS2300. I'm using iozone and bonnie++ to benchmark. Iozone gives me stats for read performance, but the Hitachi doesn't record and read commands. Odd. Using zpool iostat <storage pool> also doesn't report and read commands for any of the tests I've done. Even if i cp a large zip file to the fs and then unzip it, I only get write stats, no read stats. What am I missing here? Do these missing stats have something to do with ZFS?
How can I get reliable performance stats about each zpools workload and performance?
Thanks,
Demian

Ive never had any trouble getting read stats out of iostat or zpool iostat.
Well, unless its the first time you unzip'ed it. It could well be cached.
And it you downloaded it. It could have been cached when it was written.
For the sake of sanity checking, try rebooting the box. Then redo the test.
Once you've established that your testing method works, you can see if you can find more convenient methods
of achieving the same thing. Maye unmounting and remounting the filesystem.

I cannot access online statements for my credit card account when using firefox, but have no problem when using safari.

When I attempted to check the monthly statement for my credit card account and clicked on "See statement", the next screen that appeared, which was labeled Online Statement", was blank. In the past, I have never had any problems with this. When I checked with the bank that issued the credit card, the representative I spoke with said that it was a browser issue and that, since I was working on a Mac, I should try using Safari. When I switched to Safari, I had no problem bringing up my statement. But I would prefer to be able to use Firefox to obtain information like this, since it's the browser I always use.

Can you upgrade your browser to Firefox 12 and check?
* getfirefox.com

VLD-1119: Unable to generate Multi-table Insert statement for some or all t

Hi All -
I have a map in OWB 10.2.0.4 which is ending with following error: -
VLD-1119: Unable to generate Multi-table Insert statement for some or all targets.*
Multi-table insert statement cannot be generated for some or all of the targets due to upstream graphs of those targets are not identical on "active operators" such as "join".*
The map is created with following logic in mind. Let me know if you need more info. Any directions are highly appreciated and many thanks for your inputs in advance: -
I have two source tables say T1 and T2. There are full outer joined in a joiner and output of this joined is passed to an expression to evaluate values of columns based on
business logic i.e. If T1 is available than take T1.C1 else take T2.C1 so on.
A flag is also evaluated in the expression because these intermediate results needs to be joined to third source table say T3 with different condition.
Based on value taken a flag is being set in the expression which is used in a splitter to get results in three intermediate tables based on flag value evaluated earlier.
These three intermediate tables are all truncate insert and these are unioned to fill a final target table.
Visually it is something like this: -
T1 -- T3 -- JOINER1
| -->Join1 (FULL OUTER) --> Expression -->SPLITTER -- JOINER2 UNION --> Target Table
| JOINER3
T2 --
Please suggest.

I verified that their is a limitation with the splitter operator which will not let you generate a multi split having more than 999 columns in all.
I had to use two separate splitters to achieve what I was trying to do.
So the situation is now: -
Siource -> Split -> Split 1 -> Insert into table -> Union1---------Final tableA
Siource -> Split -> Split 2 -> Insert into table -> Union1

My macbook seems to be going crazy. At certain points (and for hours) I get the oh snap page on chrome, safari doesnt work, macbook wont let me create any files or for example upload music to itunes. I restored my mac so im sure its not a malware problem.

My macbook seems to be going crazy. At certain points (and for hours) I get the oh snap page on chrome, safari doesnt work, macbook wont let me create any files or for example upload music to itunes. I restored my mac so im sure its not a malware problem. The only thing that solves it is switching off and on , but sometimes I have to do that for 6-7 times before its ok or wait for a few hours. Some help please

Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2.

Error while uploading Bank statement for BACS

Hi All,
We are facing a error while uploading a bank statement for BACs, the system is not autoposting (clearing the open items) for the BACs file. The bank statement is as below
:20:20081015
:25:200000/50414107
:28:28290/01
:60F:C081015GBP1176,45
:61:0810151015DX448,97FDDRNONREF//
:86:999/00DDRARVAL             1875180
:61:0810151015DX779,07FDDRNONREF//
:86:999/00DDRBP OIL UK RECPS AC230679BI2898784
:61:0810151015DX24469,50FDDRNONREF//
:86:999/00DDRSAPBACS0000341816               BACS
:61:0810151015DX233018,83FDDRNONREF//
:86:999/00DDRSAPBACS0000340411               BACS
The last line items BACS file is not posting the document but we have manually auto cleared the document.
Can any one let me know what has caused the error. And where to check out the setting of this.
Thanks and Regards
Sri

solved myself

Any altenate statement for WRITE-TO

Similar Messages

Maybe you are looking for