Any FM / CLASS to change/update the Invoice-VBRK-VBELN?

Hello Experts,
Pls. let me know that is there any FM / CLASS to change/update the existing Invoice-VBRK-VBELN?
BECAUSE my requirement is that I need to update/change the field - VBRK-RFBSK ('Status for transfer to accounting') of an existing Invoice in VBRK table/VF03 Tx in the system.
Thank you

Hi
Why do you need to change VBRK-RFBSK, this field indicates if the bill was trasnferd to the accounting
Max

Similar Messages

Mass change of the invoices

Does SAP provide any transaction code for mass change of the invoice.
I want to change the value inputed in the reference key 1 of the customer line items already posted, there are 850 line items posted . i want to change the value in the Ref key1 field. Does any Trans Code for us to change as we have in gl, mass reversal etc.
Best Regards
Rajesh

Hi,
i think the most simple solution is to program a bdc for transaction FB09 or fb02
-> use bdc-recoreder SHDB
A.

Is there any Standard BAPI's to update the table BP021?

Hi,
I am developing an inbound program to update the Business Partner Master(BP021) table. I need to update the field 'Staff_Count' in that table.
Is there any BAPI's available to update the BP021 table? Thanks in advance for your help..
Poornima

Hi,
Some FM's are available.
Please refer these FM's
FS_API_BP021_CHANGE Change Fiscal Year Information
FS_API_BP021_GET Read Fiscal Year Information
FTB_BUPA_BP021_GET
FTBP_READ_BP021
FSBP_READ_BP021
Regards,
Jyothi CH.

To find a user exit which update the Invoice header data

Hi,
I need a user exit which will update the invoice header data. For eg I need to update the fields RBKP_V-ESRNR and RBKP_V-ESRRE in table RBKP_V. I was using this user exit EXIT_SAPLMRMP_010 (Program ZXM08U16).But this is not working fine as this has no exporting parameter nor tables of structure RBKP_V.
I need for transaction MIRO.
Kindly help ...
Points will be rewarded
Thanks in advance

Hi jayasree,
with the help of the below given program you can find out the requried user exit by giving the T code (MIRO).
*& Report Z_USEREXIT_DISPLAY *
Title : Display UserExits *
Transport Request No : *
Modification Log *
ModNo Date Consultant Description of Change(s) *
REPORT z_userexit_temp
NO STANDARD PAGE HEADING
LINE-SIZE 200
MESSAGE-ID zz.
T A B L E D E C L A R A T I O N S *
TABLES: tftit,
e071,
e070.
S T R U C T U R E D E C L A R A T I O N S *
TYPES: BEGIN OF x_tstc,
tcode TYPE tcode,
pgmna TYPE program_id,
END OF x_tstc.
TYPES: BEGIN OF x_tadir,
obj_name TYPE sobj_name,
devclass TYPE devclass,
END OF x_tadir.
TYPES: BEGIN OF x_slog,
obj_name TYPE sobj_name,
END OF x_slog.
TYPES: BEGIN OF x_final,
name TYPE smodname,
member TYPE modmember,
include(15), "Include name
END OF x_final.
I N T E R N A L T A B L E D E C L A R A T I O N S *
DATA: it_tstc TYPE STANDARD TABLE OF x_tstc WITH HEADER LINE.
DATA: it_tadir TYPE STANDARD TABLE OF x_tadir WITH HEADER LINE.
DATA: it_jtab TYPE STANDARD TABLE OF x_slog WITH HEADER LINE.
DATA: it_final TYPE STANDARD TABLE OF x_final WITH HEADER LINE.
V A R I A B L E S D E C L A R A T I O N S *
U S E R I N P U T S S C R E E N *
S E L E C T I O N S C R E E N *
SELECTION-SCREEN: BEGIN OF BLOCK blk01 WITH FRAME TITLE text-t01.
PARAMETERS: p_tcode LIKE tstc-tcode OBLIGATORY.
SELECTION-SCREEN END OF BLOCK blk01.
S t a r t o f S e l e c t i o n *
START-OF-SELECTION.
PERFORM get_tcodes. "Get Tcodes
PERFORM get_objects. "Get Objects
E n d o f S e l e c t i o n *
END-OF-SELECTION.
PERFORM display_results. "Display Results
*& Form get_tcodes
Get Tcodes
FORM get_tcodes.
SELECT tcode
pgmna
INTO TABLE it_tstc
FROM tstc
WHERE tcode = p_tcode.
IF sy-subrc = 0.
SORT it_tstc BY tcode.
ENDIF.
ENDFORM. " get_tcodes
*& Form get_objects
Get Objects
FORM get_objects.
DATA: l_fname LIKE rs38l-name,
l_group LIKE rs38l-area,
l_include LIKE rs38l-include,
l_namespace LIKE rs38l-namespace,
l_str_area LIKE rs38l-str_area.
DATA: v_include LIKE rodiobj-iobjnm.
DATA: e_t_include TYPE STANDARD TABLE OF abapsource WITH HEADER LINE.
DATA: l_line TYPE string,
l_tabix LIKE sy-tabix.
IF NOT it_tstc[] IS INITIAL.
SELECT obj_name
devclass
INTO TABLE it_tadir
FROM tadir FOR ALL ENTRIES IN it_tstc
WHERE pgmid = 'R3TR' AND
object = 'PROG' AND
obj_name = it_tstc-pgmna.
IF sy-subrc = 0.
SORT it_tadir BY obj_name devclass.
SELECT obj_name
INTO TABLE it_jtab
FROM tadir FOR ALL ENTRIES IN it_tadir
WHERE pgmid = 'R3TR' AND
object = 'SMOD' AND
devclass = it_tadir-devclass.
IF sy-subrc = 0.
SORT it_jtab BY obj_name.
ENDIF.
ENDIF.
ENDIF.
*- Get UserExit names
LOOP AT it_jtab.
SELECT name
member
INTO (it_final-name, it_final-member)
FROM modsap
WHERE name = it_jtab-obj_name AND
typ = 'E'.
APPEND it_final.
CLEAR it_final.
ENDSELECT.
ENDLOOP.
*- Process it_final contents.
LOOP AT it_final.
l_tabix = sy-tabix.
CLEAR: l_fname,
l_group,
l_include,
l_namespace,
l_str_area.
l_fname = it_final-member.
CALL FUNCTION 'FUNCTION_EXISTS'
EXPORTING
funcname = l_fname
IMPORTING
group = l_group
include = l_include
namespace = l_namespace
str_area = l_str_area
EXCEPTIONS
function_not_exist = 1
OTHERS = 2.
IF sy-subrc = 0.
IF NOT l_include IS INITIAL.
*- Get Source code of include.
CLEAR: v_include, e_t_include, e_t_include[].
v_include = l_include.
CALL FUNCTION 'MU_INCLUDE_GET'
EXPORTING
i_include = v_include
TABLES
e_t_include = e_t_include.
IF sy-subrc = 0.
LOOP AT e_t_include.
IF e_t_include-line CS 'INCLUDE'.
CLEAR l_line.
l_line = e_t_include-line.
CONDENSE l_line NO-GAPS.
TRANSLATE l_line USING '. '.
l_line = l_line+7(9).
it_final-include = l_line.
MODIFY it_final INDEX l_tabix TRANSPORTING include.
ENDIF.
ENDLOOP.
ENDIF.
ENDIF.
ENDIF.
ENDLOOP.
ENDFORM. " get_objects
*& Form display_results
Display Results
FORM display_results.
FORMAT COLOR COL_HEADING.
WRITE:/1(150) sy-uline.
WRITE:/ sy-vline,
2(23) 'Extension Name',
24 sy-vline,
25(39) 'Exit Name',
64 sy-vline,
65(74) 'Description',
140 sy-vline,
141(9) 'Include',
150 sy-vline.
WRITE:/1(150) sy-uline.
FORMAT RESET.
SORT it_final BY name member.
LOOP AT it_final.
CLEAR tftit.
SELECT SINGLE stext
INTO tftit-stext
FROM tftit
WHERE spras = 'EN' AND
funcname = it_final-member.
WRITE:/ sy-vline,
it_final-name COLOR COL_KEY, 24 sy-vline,
25 it_final-member, 64 sy-vline,
65 tftit-stext, 140 sy-vline,
141 it_final-include, 150 sy-vline.
WRITE:/1(150) sy-uline.
ENDLOOP.
Regards
Srinivas

My email says it's checking mail but doesnt find any and doesn't change update time

My email says it's checking mail but doesnt find any and doesn't change update time. Only started today. Have checked settings and tried turning off to no help. Can anyone help?

which email account is it? is it happening with all accounts or just one? Have you tried closing the mail app out of multitasking?

HT4972 hello friends i have a problem in my ipod touch it has 4.2.1 version of software but it doesnot supports any aps so how to update the ios please anybody help me..

hello friends i have a problem in my ipod touch 3g it has 4.2.1 version of software but it doesnot supports any apps so how to update the ios 5 or more than this please anybody help me..i am in trouble.

I suspect you really have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
Otherwise connect to yor computer and update via iTunes. Yo need iTunes 10 or later on the computer.
To more easily find compatilbe apps for 4.2.1
iOSSearch - search the iTunes store for compatible apps.
Vintapps 3.1.3 - paid app.
Apple Club - filter apps by iOS version.
Discussion post by msgarmar - technique to sort apps by date.

MR 11 not updating the invoicing for services

Hi All,
I have a scenario where the client uses MR11 for clearing the invoices.
He does not use MIRO for invoicing.
During our observation it is found that using MR11 does not update the invoices for services but the invoices for the material received is updated while checking the reports like ME2N.
I have checked the Service based IV and the GR based IV in the invoice tab of PO.
Can you please advice me as to why this is happening only in case of services.
Thanks and Regards
Sridhar.

Hi Charlie,
Thank you very much for the response.
Actually I am looking for the IR reduction and not the GR reduction.
The note you have mentioned applies for GR reduction.
Also we are in the ECC 6 environment.
Please update me with further information.
Regards
Sridhar

I no longer have access to the email address that is stipulated as my rescue email address and I cannot remember the answers to my security questions. Please advise how I go about changing / updating the answers to the security questions.

I no longer have access to the email address that is stipulated as my rescue email address and I cannot remember the answers to my security questions. Please advise how I go about changing / updating the answers to the security questions.

Contact iTunes Support:
http://support.apple.com/kb/HT5699?viewlocale=en_US
or by email:
https://ssl.apple.com/emea/support/itunes/contact.html
Cheers,
GB

Periodically disappears outgoing traffic. Iphone4. SIM card changed, update the firmware.

periodically disappears outgoing traffic. Iphone4. SIM card changed, update the firmware.

This wine automatic translation ... I can not make outgoing calls except emergency calls.

How to update the field 'VBRK-ZUONR' of Billing Document Header(VF03)

Hi Experts.
I got a request to update the field 'VBRK-ZUONR' of Billing Document Header(T-code:VF03).
At first i thought it might be a BADI or User-Exit case and looked up in Standard Program but found nothing.
Thus i doubted if it was a configuration problem.
I tryed to configure through transaction code "VTFA" "VTFL" "VTFF" and met another failure.
Now i'm totally lost and hope for your advice,any information would be appreciated.
The Billing Document is automatically generated from the posting of Outbound Delivery.
Regards.
Panda.

Hi friends.
I've found where point is.
The include program 'RV60AFZC' contains a form named 'USEREXIT_FILL_VBRK_VBRP',
in which the field 'VBRP-ZUONR' could be set through coding.
In our system the codes had been changed once,which led to the misalignment that confused me yesterday.
On the other hand,undoubtedly VTFL is available to configure the value of 'VBRP-ZUONR'.
For more information plz refer to
http://help.sap.com/saphelp_46c/helpdata/en/18/f62c7dd435d1118b3f0060b03ca329/content.htm
Thanks again to all of you.
Best Regards
Panda.

Problem in changing(updating) the data in table control

Dear ABAP Experts,
I have a screen with 2 tables fields. 1st table(ZESTHEADER) fields are normal fields in the screen.
2 nd table fileds(ZESTDETAILS) are table control fields in the same screen .
Now i can update the 1st table fields(ZESTHEADER) succesfully But 2 nd table fields(ZESTDETAILS) are not at all updating. please review the below code and let me knwo where iam wrong.
FLOW LOGIC:
PROCESS BEFORE OUTPUT.
loop at itab1 with control VCONTROL CURSOR VCONTROL-CURRENT_LINE.
MODULE STATUS_0100.
endloop.
PROCESS AFTER INPUT.
MODULE USER_COMMAND_0100.
loop at itab1.
endloop.
module mod1.
module user_exit.
CODE:
PROGRAM ZEST_HEADER2 message-id ymsg.
tables: zestheader,zestdetails.
data: itab like zestheader occurs 0 with header line.
data: itab1 like zestdetails occurs 0 with header line.
controls: vcontrol type tableview using screen '100'.
MODULE USER_COMMAND_0100 INPUT.
case sy-ucomm.
    when 'ENTR'.
    refresh itab.
      select * from ZESTHEADER INTO ITAB where ESTMATE_NBR = ZESTHEADER-ESTMATE_NBR.
        append itab.
      endselect.
      if itab is not initial.
      refresh itab1.
      SELECT * FROM ZESTDETAILS INTO table ITAB1 for all entries in itab wHERE ESTMATE_NBR = itab-ESTMATE_NBR.
select * from zestdetails INTO ITAB1 where ESTMATE_NBR = itab-ESTMATE_NBR.
        append itab1.
     endselect.
      endif.
    when 'UPDA'.
      move zestheader to itab.
      append itab.
     update zestheader from table itab.
      move-corresponding zestdetails to itab1.
     update zestdetails from table itab1.
append itab1.
      if sy-subrc eq 0.
        message s002(ymsg).
      else.
        message e003(ymsg).
      endif.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_0100 INPUT
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS 'ZESTCHNG'.
SET TITLEBAR 'ZESTCHNG2'.
MOVE-CORRESPONDING ITAB TO ZESTHEADER.
MOVE-CORRESPONDING ITAB1 TO ZESTDETAILS.
ENDMODULE.                 " STATUS_0100 OUTPUT
MODULE User_exit INPUT.
case sy-ucomm.
    when 'EXIT'.
      leave program.
endcase.
ENDMODULE.                 " User_exit INPUT
*&      Module mod1 INPUT
      text
MODULE mod1 INPUT.
ENDMODULE.                 " mod1 INPUT

Hi Ramesh,
For performance : Change the code.
1.   select * from ZESTHEADER INTO table ITAB
      where ESTMATE_NBR = ZESTHEADER-ESTMATE_NBR.
2. if itab is not initial.
      refresh itab1.
         SELECT * FROM ZESTDETAILS INTO table ITAB1
          for all entries in itab wHERE ESTMATE_NBR = itab-ESTMATE_NBR.
      append itab1. No need of append itab1 here.
3.This part i am not able to under stand.
    when 'UPDA'.
        move zestheader to itab.
          append itab.
Above code by writing move zestheader to itab" how data will move from database table"
***In below code without loop how you are moving data to internal table itab1.
            update zestheader from table itab.
             move-corresponding zestdetails to itab1.
          update zestdetails from table itab1.
           append itab1.
if sy-subrc eq 0.
message s002(ymsg).
else.
message e003(ymsg).
endif.
I think you have not pasted full code

Payment terms change in the Invoice list

Hi Experts
Please guide the steps how to change the payment terms in the invoice list
Thansk in Advance.

Hi,
As far as my understanding U can not change Payment terms in INVOICE or even in INVOICE LIST,
Try through Transaction varient or screen varient - SHD0
In this make this payment term field changeable.
Kapil

Is there any BAPI or FM to update the scheduled dates of a production order

Hi Friends,
I would like to know if there is any BAPI or function module available to update
the Scheduled finish and Scheduled start dates (GLTRS,GSTRS fields from AFKO table) of
a production order.
I have searched the forum, but I could not find anything.
It would be of great help if anybody let me know about any Function Module / BAPI.
Regards
Aditya

Hi ravi,
in crm we have a t-code to cancel billing doc just execute and provide billing doc no and test run.
that automatically cancel the billing doc. CRMD_BILL_REV Cancel Billing Document
and here is the function module to cancel the billing doc..
BAPI_BILLINGDOC_CANCEL1 Cancel billing document.
if you want to more just fallow this links i think this might be help full to you..
https://help.sap.com/saphelp_sm40/helpdata/en/6f/f26863448111d5992400508b6b8b11/content.htm
Cancellation of Billing - Billing - SAP Library
let me know if there is any queries.
Thanks & Regards,
Srinivas.

Is there any way I can just update the apps on my iPhone using iTunes on my PC?, Is there any way I can just update the apps on my iPhone using iTunes on my PC?

I have more than a 100 apps which I do not use but are there in my iTunes library! My iPhone has only a few (40) updates. As I am not allowed to use office wi-fi to download or update my phone apps, I want to use iTunes on my PC for the same. But I do not want to waste time searching for the apps on my phone and then update it using iTunes. Also, I do not want to update all the apps in my iTunes Library as there are more gthan 100. Can anyone suggest me a method where I can just update the apps that are on my phone using iTunes??
I have the latest iTunes installed.

Your i-device was not designed for unique storage of your media. It is not a backup device and media transfer was planned with you maintaining a master copy of your media on a computer which is itself independently backed up against loss. To use a device with a different setup you transfer the old library from a computer or a backup directly to the new setup, not the device to the library. Media syncing is one way, computer to device, updating the device content to the content on the computer, not updating or restoring content on a computer. The exception is iTunes Store purchases which can be transferred to a computer.
iTunes Store: Transferring purchases from your iOS device or iPod to a computer - http://support.apple.com/kb/HT1848 - only purchases from iTunes Store
For transferring other items from an i-device to a computer you will have to use third party commercial software. See this document by turingtest2: Recovering your iTunes library from your iPod or iOS device - https://discussions.apple.com/docs/DOC-3991

Changing / Updating the Characteristics of Material in Inquiry Document

Hello
My requirement is to update the characteristics of the material of Inquiry line item (VA11/VA12/VA13). I searched the forum but the the only answer i found was using BAPI - BAPI_SALESORDER_CHANGE. But this is not updating the Inquiry Document even after using the BAPI_TRANSACTION_COMMIT.
Please can anyone let me know how I can update the characteristics in the Inquiry Document?

check business object 2030 in SWO1
You will find
BAPI_CUSTOMERINQUIRY_CHANGE
BAPI_INQUIRY_CREATEFROMDATA
BAPI_INQUIRY_CREATEFROMDATA2

Any FM / CLASS to change/update the Invoice-VBRK-VBELN?

Similar Messages

Maybe you are looking for