Any lighting option for MacBook's internal isight?

I currently have a Powerbook 12" and I use SightLight with my external iSight.
I m thinking to get a MacBook and I'm wondering what lighting options (USB or FW, I guess - but maybe even battery powered?) there are that would allow me to videoconference with good results.

Hi and welcome to discussions,
Does this help at all?....
iChat
Hope so.
Cheers
Ian

Similar Messages

Any further options for fixing a network extender with flashing red sys light?

I've been using my network extender without any problem for a few years. Well, except it always had stopped working on occasion (maybe every 6 months) and I would have to toggle it back and forth between open access and managed on the Verizon site to get it working. That was fine, but this time it's been stuck on a slowly flashing red sys light. The power, gps, and wan lights are all solid blue. Eventually it will seem to start over with the cycle of leds but end up again at all blue except a slow flashing red sys light.
That was months ago and I've been struggling with it ever since with no luck. I tried calling support a couple of times but could never navigate through to any appropriate option for network extenders. Both times the automated system couldn't figure out what my issue was and hung up on me.
I tried power cycling my cable modem and router. I've tried the open/manage setting change on the My Verizon page for the extender. I've verified my router settings, though no equipment has been changed. I even tried assigning an IP to the network extender and configuring the correct ports for it (found a list of the port numbers somewhere else on this site). I've of course tried leaving it off for a bit.. 5 minutes, 30 minutes, 10 hours, and ultimately a month or so. Nothing makes a difference and I'm still stuck with a slow flashing red sys light. It's frustrating as I general manage only 1 signal bar even at best in the house or around the yard. It's hardly usable even though the Verizon coverage map shows solid coverage all over my house and neighborhood.
Any help or ideas would be appreciated. Did the network extender simply die? Is there any way to diagnose that for certain?

It is up and running again.
I just really wish they would have the courtesy to post on here, Facebook, Twitter, whatever, wherever, but to just let us know that there is a problem, they are aware of it, and are working to fix it.
For a communications company, so far I have not seen that they have any communication skills.

If we dont want to use sleep/wakeup button for dissconnect the call so there is any other option for dissconnect the call without using sleep/wakeup button in ios 8.1.3. kindly suggest

if we dont want to use sleep/wakeup button for dissconnect the call so there is any other option for dissconnect the call without using sleep/wakeup button in ios 8.1.3 . kindly suggest..!

Hello kumar kalptaru,
Thank you for participating in the Apple Support Communities.
It sounds like you're wondering how to hang up a call besides using the Sleep/Wake button.
Other than this, you can tap the red hang up button on the Phone app. See the iPhone User Guide for more help:
While on a call - iPhone
End a call. Tap or press the Sleep/Wake button.
Best Regards,
Jeremy

HT1420 i am trying to authorize my new computer. i cannot find any menu option for this in the Itunes store.

I am trying to authorize my new computer for Itunes. I cannot find any menu option for this in the computer store

Authorization and Deauthorization
Macs: iTunes Store- About authorization and deauthorization.
Windows: How to Authorize or Deauthorize iTunes | PCWorld.
In iTunes you use the Authorize This Computer or De-authorize This Computer option under the Store menu in iTunes' menubar. For Windows use the ALT-S keys to access it. Or turn on Windows 7 and 8 iTunes menus: iTunes- Turning on iTunes menus in Windows 8 and 7.
More On De-authorizing Computers (contributed by user John Galt)
You can de-authorize individual computers, but only by using those computers. The only other option is to "de-authorize all" from your iTunes account.
1. Open iTunes on a computer
2. From the Store menu, select "View my Account..."
3. Sign in with your Apple ID and password.
4. Under "Computer Authorizations" select "De-authorize All".
5. Authorize each computer you still have, as you may require.
You may only do this once per year.
After you "de-authorize all" your authorized computers, re-authorize each one as required.
If you have de-authorized all computers and need to do it again, but your year has not elapsed, then contact: Apple - Support - iTunes - Contact Us.

Is there any other option for using internal table in badi

hi
i know we cannot use internal table in badi
but is der any other option
plz write in d codez too
with Regards
Rohan Shetty
Edited by: Rohan Shetty on May 6, 2008 2:14 PM

of course you can use internal table in BAdi, do like this.
data: itab type table of ....
data: wa type ...
Example:
data: itab type (standard, sorted, hashed) table of mara.
data: wa type mara.
Or create your own type within the badi.
types: begin of ty_xxx,
            fielda type c,
            fieldb type n,
            fieldc type d.
types: end   of ty_xxx
data: itab type table of ty_xxx.
data: wa type ty_xxx.
Edited by: Micky Oestreich on May 6, 2008 2:16 PM

Why doesn't my iTunes on Windows 7 have any synchronizing options for my new ipad.

this is all I have got from my Itunes. It does recognise that I have connect my ipad to the itunes, but it does not give me any synchronising options as it is supposed to have such as videos, musics. contracts and so on. Can some body helo me please ?

Thank you for replying my question. How can I activate my ipad? I followed all the instruction when I first start my ipad, and I don't think I have come across any instruction asking me to activate my ipad.

Finance options for macbook pro

I am planning to purchase a macbook pro and was looking into possible finance options and found the finance option on the apple website the only problem is it mentioned something about a loan so does this mean if I was to go for the finance option on a £1700 macbook pro and never missed a payment I would be repaying the 1700 and a bit on top even if I never missed a payment.
In other words I only want to choose finance if I only have to repay what I borrow with no interest on top.

Credit Cards... yes. Because they're a "revolving door" when it comes to credit. A loan on the other hand, is not.
I'd say in the case of a "loan" there's going to be some level of interest. The financing options for US customers is different than the payment plans they offer in the UK. I encourage you to visit this website for more details on how the program works-
http://www.apple.com/uk/financing/consumer/faq.html
Judging by the FAQ, there's definitely going to be some interest. It would appear as though that information is not public (at least on their website) so you'll need to call in for more details and specifics.

Any other options for load balancing

hello everyone,
i have been unsuccessful to implement load balancing effectively. have you come across any such problems with load balancing not working as expected? are there any othner options to implement load balancing?
thank you in advance

/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
I do not see what you want to achieve or what you have tried to do. So please provide some more information.
/André

Does anyone have any ideas/options for acessing the SMSinbox?

Hi All,
I know that we cannot acess The SMS inbox using j2me .But just wanted to know if someone had some ideas or options for acessing it via some method
Plz let me know
Thanks in advance
Sagar

Its possible in phones running an OS such as Symbian or Windows Mobile.
Native apps developed for these OSs can usually access the inbox.

Best external RAID option for MacBook Pro

I have been searching for an external RAID enclosure/solution to use with my MacBook Pro (with Thunderbolt). I would like to use Thunderbolt, but if Firewire 800 provides a more reliable solution than any of the Thunderbolt solutions I will go with the more stable options.
I have looked at a variety of options, and it appears the following are the top runners for a solution, any thoughts on any of these options:
Get a Promise Pegasus Thunderbolt array
The reliability of this unit really worries me, and if it failed as frequently as some are indicating, it could be busy nearly all the time recovering if I had 6+GB of content on the thing when it failed
Advantage of this unit is I could get enough capacity in one chassis to hold me for a fair length of time
The big disadvantage, if this thing fails as frequently as some indicate, restoring 6+GB of content to the thing does not sound fun
Get one of the Thunderbolt, OS X Software RAID boxes, (the likes of G-Tech, and Western Digital)
The use of the OS to manage the RAID array worries me, how is performance, how easy is it to replace a faulty drive and have the OS detect the new drive and start the rebuild process?
How long will it take to rebuilt a failed disc in the 2 to 3TB range?
Use the Firewire 800 port on a CalDigit VR 2 two drive RAID 1 mirror set
This seems to have fairly decent reviews, although there is not a lot of end user reviews that I have found
It will take at least three of the largest unit CalDigit makes to handle my images and have room for new images
Clearly Firewise will not be as fast as the Thunderbird devices
Get the CalDigit VR 2 but try to use the USB3 connection
CalDigit has a USB 3 card that can fit in the 17" MacBook Pro, but I have no idea how well the USB 3 card works with the MacBook Pro?
USB 3 does not daisy chain, the CalDigit card has two ports, however, if you have more than two external arrays you are still in a mood of swapping external drives
Drobo is coming out with Thunderbolt solutions
The bare box is pricey, add four or five large drives and there is some serious money in the thing
There are lot's of reports of failures and inability to rebuild, etc., on the Drobo
The OWC Quad interface QX2
A fair number of reports of failures on this device
Little information on rebuild speed in event a drive needs to be replaced
I am not very interested in a NAS, even with GigaBit Ethernet the performance will not be as good as direct attached
I do have a 3 year old Mac Pro that is under utilized, I could add more storage and even a RAID controller card for an external enclosures, but again, trying to edit images and/or videos across the network may not be a viable option
Any other ideas, something KNOWN to be good, with minimal failures, and when it does fail it rebuilds quickly and safely
The last piece of the solution is ideally a solution that is fairly low noise.
Any suggestions, direct end user experience, etc., would be greatly appreciated

What a list
Well, take a look at CalDigit's HDPro2 8TB (supporting RAID 5 and 6)
http://www.CalDigit.com/store.asp#HDPro2
It's more expensive than others but works with your MacPro thorugh PCIe connection and very reliable comparing to others.
or a cheaper HDOne 8TB in RAID 5/6
http://www.CalDigit.com/store.asp#HDOne

Lighter adapter for MacBook Pro?

Hello,
I just wanted to know if a good lighter adapter existed for the MacBook Pro. Or, would it be simpler to get a cheaper 120V inverter, knowing that the vast majority are modified sinewave type, which is not supposed to be the ideal waveform. However, can a standard MacBook Pro charger be used with such an inverter?

Ok, and what about the lighter adapter? It seems rather awkward to have a multi-lighter socket adapter for the GPS, DVR, and an inverter for the electronics charger don't you think?

External monitor options For Macbook Pro(2011)

Just curious as to what my monitor options are as a external monitor for the Macbook Pro. I'm pretty much set on 27'' thunderbolt display but its a hefty price to swallow...
Best buy has some good deals on there 27'' monitor but can i get the same resolution and clarity from other brands that will be eqivalent to Apple?
I'd like to stay in the 27'' to 30'' size...
thanks

Any other options like Samsung, LG etc... that offer the same specs as the thunderbolt display?
Thanks

Upgrade options for Macbook pro (early 2008-15 inch, 2.4 ghz)

Hi, i recently got a second hand early 2008 macbook pro 15 inch (2.4ghz) and i was wondering what my options were to upgrade the ram & hard drive. i'm fairly new to macintosh architechure so any help would be awesome! thanks

Sweet! thanks!
and i have my eyes on this kit because i can put the current drive in there and not let it go to waste
750 GB 2.5 SATA this will work yeah?
http://eshop.macsales.com/item/HGST/Y0J11563/

Any codecs good for editing on internal laptop drive?

i know editing in a native dv or hdv format on a laptop isn't good and/or safe for the drive....so are there any codecs other than offline RT (I want to be able to send the clips to motion and make nice graphics, etc) I can capture to and edit and have the drive work so hard and have no future possible sync issues?
THANK YOU
God Bless America~!

The issue isn't really the codec, it's just that you are asking the system drive to do alot when you also use it to capture and playback media.
That being said, many people successfully capture to and edit DV on their MacBook Pro using the system drive. I've done it many times myself, I just don't rely on it if I have another choice.
External FW drives are so cheap these days, it only makes sense to use one for editing even if it's only to increase your storage space. Believe me, even if editing using the system drive works for you, you'll be amazed how quickly you fill that sucker up with media, render files etc.
rh

Capture options for Macbook

Hi,
I tried searching for an answer to this but couldn't find the exact answer I was looking for.
How do you capture on a Macbook? There's only one firewire port and you're not supposed to capture to your startup drive/same drive FCP is running from. The posts I've read state that it isn't ideal to share two devices (an external Hard Drive) on a single firewire port. Wouldn't I run into problems capturing from my camera to an external firewire drive when both are connected to the computer via a hub?
I used to use a PowerMac which had two Firewire ports...
Thanks in advance,
Pete

Thanks guys. I just picked up a Western Digital external drive and was wondering why it had two firewire connections on the back. Now I know. They should really do this for USB devices.
I'll give this a shot and see how things go. It's a little odd how Apple positions itself as a leader in editing video for the consumer with such a limitation on ALL of it's consumer based computers???
For the iMac, they need to shrink the insides so there's room for a second HD. Especially with the benefits of SATA and their dropping prices. That and an upgradeable video card but I'm really dreaming there.
I can accept that they wouldn't see a MacBook as a video editor and pass on the expansion card slot. Like that would ever happen in the first place.
I'm not looking forward to firewire based speeds for editing in FCP... I'm starting to miss my tower, oh well.
Thanks again,
Pete

Any lighting option for MacBook's internal isight?

Similar Messages

Maybe you are looking for