Any performance gains after upgrade to Oracle 10 ?

Hello,
we have been using EBS 11.5.9 (with Oracle 9). Does anybody see any improvements from performance point of view after upgrade to Oracle 10r2 (but without upgrade of EBS to R12) ?
Regards

Somethings have been faster for us and somethings have been slower. In general it seems the same or better. When we get a chance to look at the jobs that are performing poorly I'm sure we will be able to make them perform. Make sure you find and apply all of the performance patches for the modules you have implemented, we are missing one right now and it is hurting our Configurator developers instance. I have actually set the the optimizer_features_enable back to 9i. This is something I would not recommend doing in a production environment, and we are only doing it until we can get the patch that fixes the optimizer in 10g applied.
One surprise for us was the increase in memory required, in our test and development instances we have found a 1GB SGA is as small as you can go with 10g and still have reasonable performance. We had a number of 9i ebus databases around 300-400MB SGA that performed just fine. This limited the number of environments we could squeeze on a single server (not really a bid deal if you only have a few dev, test and training environments).
In our production environment in order to have the same size datacache more memory was consumed. Were we could get away with a shared pool of 4GB under 9i, it grows to over 6GB in 10g. Looks like more PGA is also being used. 10g along with RUP5 and upgrading the java from 1.3 to 1.5 has increased our memory consumption. We increased memory from 64GB to 96GB and we are using a large portion of the additional 32GB. We were right at the limit with 64GB in our 9i production instance but we had never experienced the paging that we did with 10g. Now at 96GB we nolonger see any paging.

Similar Messages

Performance Problem After upgrade to oracle 10g

Hi
I have upgrade one of my datawarehouse database from oracle 9.2.0.8 to oracle 10.2.0.4 running on solaris 9
After the upgrade jobs which were running in the database is taking hell lot of time.
The jobs are accessing the views which is used to get the monthly report data from the database.
what could be the solution and where to start from to get the RCA to resolve this performance issue
Please let me know if you require any other information
database is currently running in the automatic shared memory management mode ie SGA_MAX and SGA_TARGET parameters are defined for that

There are a lot of differences between 10g and 9i in this regard, among these are:
- There is a default job that gathers statistics every night which is not there in 9i. You might have totally different statistics as in 9i due to that job, depending on how and if at all you used to collect statistics in 9i
- The 10g DBMS_STATS package collects histograms on some columns by default (parameter METHOD_OPT=>'FOR ALL COLUMNS SIZE AUTO' default in 10g whereas 'FOR ALL COLUMNS SIZE 1' in 9i) which can have a significant effect on the execution plans
- The 10g optimizer has CPU costing enabled by default which can make significant changes to your execution plans due to different costing of table scans and order of predicate evaluation. In addition it uses NOWORKLOAD system statistics if system statistics have not been gathered explicitly
- 10g checks the min and max values stored for columns in the data dictionary. If your predicates are way off compared to these values then 10g begins to adjust the calculated selectivity of the predicate which can again significantly affect your execution plans
- 10g introduces the "Cost Based Query Transformation (CBQT)" feature which means that rather than applying heuristic transformation rules transformations are costed and potentially discarded whereas 9i applies transformations unconditionally whenever possible
Check also the following note resp. white paper:
http://optimizermagic.blogspot.com/2008/02/upgrading-from-oracle-database-9i-to.html
Regards,
Randolf
Oracle related stuff blog:
http://oracle-randolf.blogspot.com/
SQLTools++ for Oracle (Open source Oracle GUI for Windows):
http://www.sqltools-plusplus.org:7676/
http://sourceforge.net/projects/sqlt-pp/

Password problem in oracle 10g after upgrading from oracle 9i

Hi to all,
i'm migrating oracle 9i to oracle 10g. in oracle 9i username/password are same character(eg kareem/kareem)
after upgrading to oracle 10g will it create any problem. Because in oracle 10g the condition is when creating user is username and password should not contain same character (kareem/kareem not allowed).
Thanks in advance

in oracle 10g document, they have mention below condition to create user. See the second condition.
• Passwords must be between 4 and 30 characters long.
• Passwords cannot be the same as the user name.
• Passwords must be from the database character set and can include the underscore (_), dollar ($), and pound sign (#) characters.
• Passwords cannot be Oracle reserved words.
• Don't start the password with a numeral.
• Don's use change_on_install or manager as passwords, since they are used by Oracle.
As i'm going to upgrade oracle 9i to 10g. if it give problem because username and password are same then i have to request my development team to change the password in their application.Can you please verify and tell me.
Edited by: user7071421 on Sep 25, 2008 4:33 AM

Performance issues after upgrading to 11g

hello,
We are facing a performance issue after upgrading from 10g to 11g.
as you can see, the tables named APPLSYS.FND_ENV_CONTEXT has grown to 15544880 records,
and oracle is using TABLE ACCESS FULL on it:
DELETE FND_ENV_CONTEXT E
WHERE NOT EXISTS
(SELECT 'X'
FROM FND_CONCURRENT_PROCESSES P
WHERE P.CONCURRENT_PROCESS_ID = E.CONCURRENT_PROCESS_ID)
AND ROWNUM < 10000;
Plan:
DELETE STATEMENT ALL_ROWSCost: 74,345
 5 DELETE APPLSYS.FND_ENV_CONTEXT
 4 COUNT STOPKEY
 3 HASH JOIN RIGHT ANTI Cost: 74,345 Bytes: 3,108,980 Cardinality: 155,449
 1 INDEX FULL SCAN INDEX (UNIQUE) APPLSYS.FND_CONCURRENT_PROCESSES_U1 Cost: 166 Bytes: 315,450 Cardinality: 63,090
 2 TABLE ACCESS FULL TABLE APPLSYS.FND_ENV_CONTEXT Cost: 69,124 Bytes: 233,173,200 Cardinality: 15,544,880
select num_rows,last_analyzed from dba_tables where table_name='FND_ENV_CONTEXT'
15544880 07/07/2011 12:08:55
please advice.
Ofer

Please see these docs.
Table Fnd_env_context Growing Very Fast [ID 419990.1]
FND Related Tablespaces Growing at Rapid and Excessive Rate [ID 189800.1]
FNDCPPUR Request Does Not Always Delete Files From The File System, Many Files Will Be Denoted As "deletion failed" [ID 1335304.1]
Concurrent Processing - Best Practices for Performance for Concurrent Managers in E-Business Suite [ID 1057802.1]
Concurrent Processing - Purge Concurrent Request and/or Manager Data Program (FNDCPPUR) [ID 104282.1]
Thanks,
Hussein

Invalid SQL command after upgrading to Oracle 9i

After upgrading to Oracle 9i, the SQL queries in some of our existing reports are no longer valid. The Oracle error returned is "old style outer join () can not be used with ANSI joins". It appears that the SQL query generated by Crystal Reports is correct in that it uses "LEFT OUTER JOIN" instead of just naming the tables separated by a comma, but it also includes the "()" qualifer on the matching columns which is no longer allowed. Is there any way to overcome this error short of rewriting the reports based on a command?

Hello,
A couple suggestions come to mind.
Business Objects tend to take problematic SQL generation very seriously at least on the SQL and Oracle platforms (due to their widespread use) and I would first grab the latest database/engine hotfixes to be certain it hasn't been tracked and corrected already. If you can clearly reproduce this issue (sounds like you can) then it should be easy to convince the support team at BOBJ to track the issue. However...
Since their hotfix release cycle is rather slow especially for items that have workarounds (even sometimes painful workarounds) you may want to consider using a Stored Procedure instead of a Command.
Commands have a notorious history of issues/limitations that tend to burn you later - especially when you have to update many reports. A stored procedure would likely render the + qualifier a moot point.
Cheers, Dylan
Dylan Lopez - 604.628.4467 Previously: Microsoft .NET Resource in Developer Support @ Business ObjectsCurrently: Principal @ Inno Software Inc / Independent Contractor Group

Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query

Hi All,
There is a Performance issue after Upgrade from 4.7 to ECC 6.0 with a select query in a report painter.
This query is working fine when executed in 4.7 system where as it is running for more time in ECC6.0.
Select query is on the table COSP.
SELECT (FIELD_LIST)
        INTO CORRESPONDING FIELDS OF TABLE I_COSP PACKAGE SIZE 1000
        FROM COSP CLIENT SPECIFIED
        WHERE GJAHR IN SELR_GJAHR
          AND KSTAR IN SELR_KSTAR
          AND LEDNR EQ '00'
          AND OBJNR IN SELR_OBJNR
          AND PERBL IN SELR_PERBL
          AND VERSN IN SELR_VERSN
          AND WRTTP IN SELR_WRTTP
          AND MANDT IN MANDTTAB
        GROUP BY (GROUP_LIST).
   LOOP AT I_COSP      .
     COSP                           = I_COSP      .
     PERFORM PCOSP       USING I_COSP-_COUNTER.
     CLEAR: $RWTAB, COSP                          .
     CLEAR CCR1S                         .
   ENDLOOP.
ENDSELECT.
I have checked with the table indexes, they were same as in 4.7 system.
What can be the reson for the difference in execution time. How can this be reduced without adjusting the select query.
Thanks in advance for the responses.
Regards,
Dedeepya.

Hi,
ohhhhh....... lots of problems in select query......this is not the way you should write it.
Some generic comments:
1. never use SELECT
                   endselect.
   SELECT
into table
   for all entries in table
where.
   use perform statment after this selection.
2. Do not use into corresponding fields. use exact structure type.
3. use proper sequence of fields in the where condition so that it helps table go according to indexes.
    e.g in your case
          sequence should be
LEDNR
OBJNR
GJAHR
WRTTP
VERSN
KSTAR
HRKFT
VRGNG
VBUND
PARGB
BEKNZ
TWAER
PERBL
sequence should be same as defined in table.
Always keep select query as simple as possible and perform all other calculations etc. afterwords.
I hope it helps.
Regards,
Pranaya

I can't see any animated wallpapers after upgrade of ios7 on my iphone 5, only my wallpaper when I started the upgrade process

I can't see any animated wallpapers after upgrade of ios7 on my iphone 5, only my default wallpaper selected when I started the upgrade process. Can I download the default animated wallpaper of ios 7?
thank you
ps. I'm apologize for my bad english language

A different approach would be to:
1. Delete the contents of the library on the desktop Window 7 computer;
2. Turn off iTunes Match;
3. Copy the contents of the Music folder from the working Windows 7 computer to the desktop Music folder;
4. Import the new contents of the Desktop music folder into the library;
5. Close / restart the iTunes client and confirm that the library has all the Songs as anticipated;
6. Turn on the iTunes Match service and allow it to run to completion.
This is a proven process on my Windows 7 computers and works very well.

Iphone4s can's search any BT device after upgrading to 7.0.3

2 iphone4s can's search any BT device after upgrading to 7.0.3
it can work well with IOS 6.0.3, but fail to search any BT device with 7.0.3
Tesing BT device
1: Plantronics Voyager Legend earphone
2: other Mobile phone BT ( available), and other MobileDevice can search this iphone and successfully paried, iphone can‘t search any device，
Keep the “searching device” status

Hi toneyfeng,
If you are having Bluetooth issues after updating to iOS7, you may find the following article helpful:
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
Regards,
- Brenden

Error while executing SSIS Package after upgrading the Oracle Client

Hello,
I am running to the below error after we upgraded the Oracle client to 11g from 10g. The source of the Data is Oracle database . Looked online but each error is pointing towards different route, Confused here any help is very much appreciated. Have to say
I am not a pro with SSIS.
SSIS package "Bentek_ISO_Package (2).dtsx" starting.
Information: 0x4004300A at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Information: 0x4004300A at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Validation phase is beginning.
Warning: 0x80049304 at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Warning: Could not open global shared memory to communicate with performance DLL; data flow performance counters are not available. To resolve, run this package as an administrator,
or on the system's console.
Information: 0x40043006 at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Prepare for Execute phase is beginning.
Information: 0x40043007 at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Pre-Execute phase is beginning.
Error: 0xC0202009 at Temp_tbl Injection Data Flow Task, OLE DB Source [1]: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E14.
An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80040E14 Description: "ORA-12801: error signaled in parallel query server P183, instance *****:qrmgmt2 (2)
ORA-01861: literal does not match format string".
An OLE DB record is available. Source: "OraOLEDB" Hresult: 0x80004005 Description: "ORA-12801: error signaled in parallel query server P183, instance ****:qrmgmt2 (2)
ORA-01861: literal does not match format string".
Error: 0xC004701A at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: component "OLE DB Source" (1) failed the pre-execute phase and returned error code 0xC0202009.
Information: 0x4004300B at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: "component "OLE DB Destination" (52)" wrote 0 rows.
Information: 0x40043009 at Temp_tbl Injection Data Flow Task, SSIS.Pipeline: Cleanup phase is beginning.
Task failed: Temp_tbl Injection Data Flow Task
Warning: 0x80019002 at *******: SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (2) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches
the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors.
SSIS package "****** (2).dtsx" finished: Failure.

Do you have any Date conversion functions in your Oracle datetime fields? I did run into a similar issue when we upgraded the oracle client and the provider started to decipher the metadata of the date columns. The SSIS metadata conversion for the date
columns yielded dates that were not valid. I had to update my queries to use the TO_CHAR conversion to bring it out as a string and then save it to the date field.
TO_CHAR (DATE, 'MM/DD/YYYY HH24:MI:SS')
Regards, Dinesh

Issue after upgrade from oracle 10.2.0.4 to 11g (11.1.0.6.0)

hello
After upgrade to 11g we have problem with dbms_workload_replay package it has error Error(1): PLS-00753: malformed or corrupted wrapped unit in body and can't be compiled . It is wrapped so we can't find error. We run utlrp.sql but no results.
Any idea ??
THX

Then it looks similar to bug 6651232
May I suggest you get in touch with Oracle support for this?

SharePoint 2007 performance issue after upgrading the operating system

We upgraded the operating system of our SharePoint Server 2007 from 2003 to 2008 R2. After upgrade we rebuilt the SharePoint using content DBs we backed up before upgrade. All settings is same except that we moved the DBs to new SQL servers. Now users are
reporting performance issue with sites. I experienced it myself some of the pages takes 9-30 seconds to load. Also our SharePoint server is single server. I monitored the SharePoint Server and it is fine. I did fiddler trace and here are the result. I see
lots of 401 (login failed) errors then 302 (redirect) then 200 (OK). Do you know why we are getting 401 errors?
Result
Protocol
Host
URL
Body
Caching
Content-Type
Process
184
401
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA
341
text/html; charset=us-ascii
iexplore:15344
185
302
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA
196
text/html; charset=UTF-8
iexplore:15344
186
401
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA/default.aspx
341
text/html; charset=us-ascii
iexplore:15344
187
200
HTTP
sp07.ourcompany.com
/bif/EUROPE-AMA/default.aspx
105,487
private, max-age=0; Expires: Mon, 22 Dec 2014 21:37:48 GMT
text/html; charset=utf-8
iexplore:15344
188
401
HTTP
sp07.ourcompany.com
/_layouts/1033/styles/calendar.css?rev=BrbrIU86qTG2EHx1ZUuFBQ%3D%3D
341
text/html; charset=us-ascii
iexplore:15344
189
200
HTTP
sp07.ourcompany.com
/_layouts/images/prevbuttonltr.gif
76
max-age=31536000
image/gif
iexplore:15344
190
200
HTTP
sp07.ourcompany.com
/_layouts/images/nextbuttonltr.gif
78
max-age=31536000
image/gif
iexplore:15344
191
200
HTTP
sp07.ourcompany.com
/_layouts/images/day.gif
1,051
max-age=31536000
image/gif
iexplore:15344
192
200
HTTP
sp07.ourcompany.com
/_layouts/images/month.gif
1,068
max-age=31536000
image/gif
iexplore:15344
193
200
HTTP
sp07.ourcompany.com
/_layouts/1033/styles/calendar.css?rev=BrbrIU86qTG2EHx1ZUuFBQ%3D%3D
28,814
max-age=31536000
text/css
iexplore:15344
194
200
HTTP
sp07.ourcompany.com
/_layouts/images/week.gif
1,057
max-age=31536000
image/gif
iexplore:15344
195
200
HTTP
sp07.ourcompany.com
/_layouts/images/weekbox.gif
149
max-age=31536000
image/gif
iexplore:15344
196
200
HTTP
sp07.ourcompany.com
/_layouts/images/alldayDefault.gif
157
max-age=31536000
image/gif
iexplore:15344
197
200
HTTP
sp07.ourcompany.com
/_layouts/images/calnumBttntoday.gif
146
max-age=31536000
image/gif
iexplore:15344
198
200
HTTP
sp07.ourcompany.com
/_layouts/images/calnumBttn.gif
95
max-age=31536000
image/gif
iexplore:15344

Hi
when you request a Site collection (http://domain/) or a Site (http://domain/foo/) of your Publishing Site you get redirected to the http://domain/Pages/<WelcomePage>.aspx. SharePoint 2007 uses the 302 header (location temporarily moved) for
this purpose. Surprisingly even WSS uses the 302 header to redirect a root url to the default.aspx. In comparison ASP.NET uses an internal redirect to render the default page when the root url requested: there is no redirect in this situation.
Check the link which can give more input
http://blog.mastykarz.nl/sharepoint-2007-redirect-solved-using-301-instead-of-302-redirects/
for error 401 you can check this link
http://discussions.citrix.com/topic/97027-no-resources-401-unauthorized/d
and check SharePoint ULS logs and event viewer for any exceptions.
Please mark the Answer and Vote me if you think that it will help you to resolved your issue

Data Protector backup integration fails after upgrade to Oracle 11.2.0.2

After upgrading a system from Oracle 10.2.0.2 to 11.2.0.2, the Data Protector backup integration fails with error
[Normal] From: BSM@<dp_cell_server>.<domain> "<sap_host>_<SID>_Online" Time: 28.04.2011 09:10:21
 Backup session 2011/04/28-74 started.
[Normal] From: BSM@<dp_cell_server>.<domain> "<sap_host>_<SID>_Online" Time: 28.04.2011 09:10:21
 OB2BAR application on "<sap_host>.<domain>" successfully started.
/usr/sap/<SID>/SYS/exe/run/brbackup: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
[Major] From: OB2BAR_OMNISAP@pervs<SID>.<domain> "OMNISAP" Time: 04/28/11 09:10:21
 BRBACKUP /usr/sap/<SID>/SYS/exe/run/brbackup -t online -d util_file_online -c -m all -u system/******** returned 127
/usr/sap/<SID>/SYS/exe/run/brarchive: error while loading shared libraries: libclntsh.so.10.1: cannot open shared object file: No such file or directory
[Major] From: OB2BAR_OMNISAP@pervs<SID>.<domain> "OMNISAP" Time: 04/28/11 09:10:21
 BRARCHIVE /usr/sap/<SID>/SYS/exe/run/brarchive -d util_file -s -c -u system/******** returned 127
[Normal] From: BSM@<dp_cell_server>.<domain> "<sap_host>_<SID>_Online" Time: 28.04.2011 09:10:22
 OB2BAR application on "<sap_host>.<domain>" disconnected.
[Critical] From: BSM@<dp_cell_server>.<domain> "<sap_host>_<SID>_Online" Time: 28.04.2011 09:10:22
 None of the Disk Agents completed successfully.
 Session has failed.
We checked the configuration, tried linking /oracle/client/11x_64 to 10x_64, removing the link and renewing the 10x_64 oracle client, but still Data Protector can't find the library libclntsh.so.10.1. A new system which was installed with Oracle 11.2.0.2 doesn't have any problems with online backups.
Any help is appreciated!

Hi,
did you create the other link according to the upgrade guide (point 5.5) ?
You need to create this link so that BR*Tools
(which is linked to the Oracle 10.2 client)
can use the newer Oracle 11.2 clients.
After the software installation has finished,
create a symbolic link in $ORACLE_HOME/lib as follows:
cd $ORACLE_HOME/lib
ln u2013s libnnz11.so libnnz10.so
or (HP-UX)
ln u2013s libnnz11.sl libnnz10.sl
Volker
Second part: For the DP job, there can be set different environment settings inside the DP job.
Did you check if there are still relicts from the previous release ?
You could integrate a small pre-exec script into the job and let it plot the output of
id
env
set
to a logfile, just to see which values the backup is using.
Edited by: Volker Borowski on Apr 29, 2011 10:12 AM

Work process crash after upgrade to Oracle 11g

Hi guys,
I have recently upgraded my Oracle database to Oracle 11.2.0.2. My environment is SAP R/3 4.7 ext 2.00, AIX 5.3 TL 9.
I also have upgrade my SAP kernel to 6.40_EX2 kernel (the lates one).
I have tested some of advanced compression features including index compression and table compression. But couple times (when this system is idle), suddenly SAP work process is crashed without notice.
Is there any experience about this ? Any suggestion would be appreciated.
Thannk you

Hi All,
This is the log file for dev_w0
================
M Sat Mar 26 00:36:16 2011
M in_ThErrHandle: 1
M ThIErrHandle: new stat of W0 is WP_SHUTDOWN
M ThIErrHandle: I'm during shutdown
M PfStatDisconnect: disconnect statistics
M Entering ThSetStatError
B db_sqlbreak() = 1
M ThIErrHandle: don't try rollback again
M ThShutDownServer: shutdown server
M ThExecShutDown: perform exclusive shutdown actions
M ThCheckComOrRb (event=1, full_commit=1)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M SosSearchAnchor: search anchor for 10
M SosSearchAnchor: invalid tid/mode T-1/M255
M ThCheckComOrRb (event=3, full_commit=1)
M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M ThVBICmRbHook: called for commit
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M SosSearchAnchor: search anchor for 10
M SosSearchAnchor: invalid tid/mode T-1/M255
M ThCallHooks: call hook >dyKeyTableRest< for event AFTER_COMMIT
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M SosSearchAnchor: search anchor for 2
M SosSearchAnchor: invalid tid/mode T-1/M255
M ThUsrDelEntry (*, *, emaprd2_WPR_10 ) o.k.
M ThICommit3: full commit, set time, keep resources, redispatch
M ThICommit3: commit and keep resources
M ThCheckComOrRb (event=1, full_commit=0)
M ThCallHooks: call hook >ASTAT-collect commit handling< for event BEFORE_COMMIT
M ThCallHooks: call hook >rsts_before_commit< for event BEFORE_COMMIT
M SosSearchAnchor: search anchor for 10
M SosSearchAnchor: invalid tid/mode T-1/M255
M ThCheckComOrRb (event=3, full_commit=0)
M ThCallHooks: call hook >ThVBICmRbHook< for event AFTER_COMMIT
M ThVBICmRbHook: called for commit
M ThCallHooks: call hook >ThNoClearPrevErr< for event AFTER_COMMIT
M ThNoClearPrevErr: clear prev no err
M ThCallHooks: call hook >rsts_after_commit< for event AFTER_COMMIT
M SosSearchAnchor: search anchor for 10
M SosSearchAnchor: invalid tid/mode T-1/M255
M ThCallHooks: call hook >dyKeyTableRest< for event AFTER_COMMIT
M ThCallHooks: call hook >SpoolHandleHook< for event AFTER_COMMIT
M SosSearchAnchor: search anchor for 2
M SosSearchAnchor: invalid tid/mode T-1/M255
M ThAlarm: set alarm to 600 sec
M ThICommit3 o.k.
M ThExecShutDown: ThUsrDelEntry o.k.
M ThExecShutDown: called rsau_log_system_stop
M PfStatIndInit: Initializing Index-Record
M PfWriteIntoFile: copied shared buf (0 bytes) to local buf
M PfTimeFactor: new value: 25200
M Entering ThReadDetachMode
M call ThrShutDown (1)...
B Disconnecting from ALL connections:
B Wp Hdl ConName ConId ConState TX HC PRM RCT FRC TIM MAX OPT Date Time DBHost
B 000 000 R/3 000000000 INACTIVE NO NO YES NO NO 000 255 255 20110326 002910 emaprd2
C Disconnecting from connection 0 ...
C Close user session (con_hdl=0,svchp=113176338,usrhp=1131b6f80)
C Detaching from DB Server (con_hdl=0,svchp=113176338,srvhp=1131773e0)
C Now connection 0 is disconnected
B Disconnected from connection 0
B statistics db_con_commit (com_total=107, com_tx=58)
B statistics db_con_rollback (roll_total=1, roll_tx=0)
M ***LOG Q02=> wp_halt, WPStop (Workproc 0 336276) [dpuxtool.c 318]
================
Any suggestion ?
ardhian
http://sapbasis.wordpress.com
http://ardhian.wordpress.com

Performance degradation after upgrading to yosemite

I'm experiencing performance degradation on MacBook Pro 15 including
number of spinning wheels,
instance of dark screen,
overheating after upgrading to Yosemite
diminished battery life
Is Yosemite the cause of this and other issues

I can't believe Apple have made this software available to the masses when it's clearly not ready. Since "upgrading" my Mac mini has been pretty useless. Programs take a substantially increased time to open compared to Mavericks, and then performance is poor at best. Opening files in Photoshop, for example, is painfully slow and I get the colour wheel almost all of the time - something which definitely didn't happen with Mavericks.
Aside from this, I've experienced a number of frustrating bugs today. When I open a new program on my left screen the right screen is changed to a fresh desktop. Why? When I turn my Mac on I get the login screen on the left monitor (as it always used to) but then the primary desktop is set to the right and I've been unable to keep the correct setting so far (it forgets that I've changed it following a reboot). The background of the top bar keeps disappearing so all of the icons, time, etc. just sit on top of the desktop background.
I hope Apple can release a fix, and quickly.

Slow running query after upgrading to Oracle 10.2.0.4

Hello
I had posted a query in Database Upgrade section , but all in vian as i have had no replies . So i am posing this in general section as i can now confirm with the exact query issue .
1. I upgraded my oracle instance windows 64 bit from 10.2.0.1 to 10.2.0.4
2. All is good except when i use SUM or MAX in queries i get a very slow performance below is the complete example
Your help is much appreciated .
Regards
Harshad
=====================================================================================================
Example.
=====================================================================================================The query runs on a single table of 275,000,000 records, partitioned by Feed_Id in 53 partitions:-
SELECT *
FROM Fact_Life
WHERE Life_Id = 11555269
AND Feed_Id = 2;
This returns 18 rows in sub-second response time.
Explain Plan for it:-
SELECT *
FROM Fact_Life
WHERE Life_Id = 11555269
AND Feed_Id = 2;
Statement Id=3 Type=INDEX
Cost=938 TimeStamp=11-06-09::11::25:55
(1) SELECT STATEMENT ALL_ROWS
Est. Rows: 66 Cost: 940
(4) PARTITION RANGE SINGLE
Est. Rows: 66 Cost: 940
(3) TABLE TABLE ACCESS BY GLOBAL INDEX ROWID RDS.FACT_LIFE [Analyzed]
Blocks: 2,765,931 Est. Rows: 66 of 275,979,985 Cost: 940
(2) INDEX INDEX SKIP SCAN RDS.PIX_FTLE_1 [Analyzed]
Est. Rows: 3 Cost: 938
However, when the query employs an aggregate function:-
SELECT MAX(Cap_Period_Id)
FROM Fact_Life
WHERE Life_Id = 11555269
AND Feed_Id = 2;
This takes anything from 200-400 seconds to return.
Explain plan for it:-
SELECT MAX(CAP_Period_Id)
FROM Fact_Life
WHERE Life_Id = 11555269
AND Feed_Id = 2;
Statement Id=3 Type=PARTITION RANGE
Cost=7 TimeStamp=11-06-09::11::26:50
(1) SELECT STATEMENT ALL_ROWS
Est. Rows: 1 Cost: 7
(5) SORT AGGREGATE
Est. Rows: 1
(4) FIRST ROW
Est. Rows: 66 Cost: 7
(3) PARTITION RANGE SINGLE
Est. Rows: 66 Cost: 7
(2) INDEX INDEX RANGE SCAN (MIN/MAX) RDS.PIX_FTLE_1 [Analyzed]
Est. Rows: 66 Cost: 7
However when the query is run with a different Life_Id for the same partition:-
SELECT MAX(Cap_Period_Id)
FROM Fact_Life
WHERE Life_Id = 11555275
AND Feed_Id = 2;
Returns sub-second.
Explain plan for it:-
SELECT MAX(CAP_Period_Id)
FROM Fact_Life
WHERE Life_Id = 11555275
AND Feed_Id = 2;
Statement Id=3 Type=PARTITION RANGE
Cost=7 TimeStamp=11-06-09::11::29:29
(1) SELECT STATEMENT ALL_ROWS
Est. Rows: 1 Cost: 7
(5) SORT AGGREGATE
Est. Rows: 1
(4) FIRST ROW
Est. Rows: 66 Cost: 7
(3) PARTITION RANGE SINGLE
Est. Rows: 66 Cost: 7
(2) INDEX INDEX RANGE SCAN (MIN/MAX) RDS.PIX_FTLE_1 [Analyzed]
Est. Rows: 66 Cost: 7
Is this a problem with b-tree indexes? The Life_Id is allocated from a sequence and there are 67,535,682 rows in the partition. The stats are up to date.
=====================================================================================================
=====================================================================================================

Hello Randolf,
Sorry for the late reply was down with flue and could not mail , as mentioned i below is the DDL for PIX_FTLE_1 & PIX_FTLE_2 . I have used TOAD to extract the script.
As i cant send the both the DDL in single post i will send it in 2 post , There is a limit of 30000 characters in sigle post .
Thanks once again for your help .
Regards
Harshad
CREATE INDEX RDS.PIX_FTLE_1 ON RDS.FACT_LIFE
(FEED_ID, CAP_PERIOD_ID, LIFE_ID, ISO_CURRENCY_ID, LIFE_SCD_ID)
TABLESPACE RDS_TABLESPACE01
INITRANS 2
MAXTRANS 255
LOGGING
GLOBAL PARTITION BY RANGE (FEED_ID) (
PARTITION HA1 VALUES LESS THAN (2)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 1225M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION NU6 VALUES LESS THAN (3)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 2761M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION FP1 VALUES LESS THAN (4)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 971M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION PRU VALUES LESS THAN (5)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 993M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION GAC VALUES LESS THAN (6)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 622M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION NU3 VALUES LESS THAN (7)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 2136M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION LEG VALUES LESS THAN (8)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 847M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION RSC VALUES LESS THAN (9)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 144M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION SW1 VALUES LESS THAN (10)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 80M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION PRI VALUES LESS THAN (11)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 34M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION BAL VALUES LESS THAN (12)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 128M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION NA1 VALUES LESS THAN (13)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION MID VALUES LESS THAN (14)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION EGS VALUES LESS THAN (15)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION ARK VALUES LESS THAN (16)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 1088M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION SKA VALUES LESS THAN (17)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 136M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION NU1 VALUES LESS THAN (18)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 196M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION SK2 VALUES LESS THAN (19)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 9M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION CU1 VALUES LESS THAN (20)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 11M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION DLI VALUES LESS THAN (21)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION AEG VALUES LESS THAN (22)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION COM VALUES LESS THAN (23)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION CU2 VALUES LESS THAN (24)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION CUL VALUES LESS THAN (25)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION EAG VALUES LESS THAN (26)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION FP2 VALUES LESS THAN (27)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION HAG VALUES LESS THAN (28)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION HAL VALUES LESS THAN (29)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION JRA VALUES LESS THAN (30)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION LEL VALUES LESS THAN (31)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION MGA VALUES LESS THAN (32)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION MGM VALUES LESS THAN (33)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION NU2 VALUES LESS THAN (34)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION PEG VALUES LESS THAN (35)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION RLM VALUES LESS THAN (36)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION RL2 VALUES LESS THAN (37)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION RL3 VALUES LESS THAN (38)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION RL4 VALUES LESS THAN (39)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION RL5 VALUES LESS THAN (40)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION BG4 VALUES LESS THAN (41)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION BG5 VALUES LESS THAN (42)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION RS2 VALUES LESS THAN (43)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION RS3 VALUES LESS THAN (44)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION RS4 VALUES LESS THAN (45)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION SA1 VALUES LESS THAN (46)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION SAF VALUES LESS THAN (47)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION SCA VALUES LESS THAN (48)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION SL1 VALUES LESS THAN (49)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION SL2 VALUES LESS THAN (50)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION SPI VALUES LESS THAN (51)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION SWP VALUES LESS THAN (52)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION VDL VALUES LESS THAN (53)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 240M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION ZUR VALUES LESS THAN (54)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION AR3 VALUES LESS THAN (55)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 360M
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
PARTITION ZZZ VALUES LESS THAN (MAXVALUE)
NOLOGGING
NOCOMPRESS
TABLESPACE RDS_TABLESPACE01
PCTFREE 10
INITRANS 2
MAXTRANS 255
STORAGE (
INITIAL 64K
MINEXTENTS 1
MAXEXTENTS UNLIMITED
BUFFER_POOL DEFAULT
NOPARALLEL;

Any performance gains after upgrade to Oracle 10 ?

Similar Messages

Maybe you are looking for