Any risks if call interface and database not matched?

hi experts,
are there any risks if the call interface of connection pool and database (in physical layer) matched ?
for example,
the call interface of connection pool (in physical layer) is selected to "OCI 10g/11g"
the database (in physical layer) is selected to "Oracle 10g R2/11g"
the oracle client on my local computer is "Oracle - OraClient10g"
and the database version is "9.2.0.7.0" (select * from nls_database_parameters where parameter = 'NLS_RDBMS_VERSION'; )
thank you very much!

There shouldn't be a problem, the OCI is backward compatible.
regards
John
http://obiee101.blogspot.com

Similar Messages

Error occurs when call interface and database is changed

hi, experts,
I have modified the RPD
I change the database from "Oracle 9i" to "Oracle 10g R2/11g"
changed the call interface of connection pool from "OCI 8i/9i" to "OCI 10g/11g"
after the change,
I got this error on one table on dashboard
Odbc driver returned an error (SQLExecDirectW).
Error Details
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 46008] Internal error: File .\Src\SQOIGeneratorBuiltIn.cpp, line 3403. (HY000)
SQL Issued: SET VARIABLE xxxxxxxxxxxx = xxxx ;SELECT xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
the table includes RANKs.
any patches for .\Src\SQOIGeneratorBuiltIn.cpp????
any alternatives ?
thank you very much!

I use a trick to work around
in the columns for ranks, change to
rank (xxx) +1 -1
then no error occurs

Remote procedure call failed and did not execute response after changing contents

Hey Hey!
I have reviewed the other posts related to this issue but have not found a solution.
I have done myself quite a mischief and hope someone here can help me out!
I'm running an old ACER laptop with Windows 7. This PC belonged to an old colleague and therefore all of the folders and user names were still under his name, so I decided to try to change them all to my name. The main issue was the USER folder which had
the locked symbol next to it but it wasn't locked at all. I googled how to delete this folder and one bright spark suggested I create a new folder with my name, copy all of the folders from the other 'locked' user's folder into my folder, and then delete the
old user's folder.
That was fine. All seemed well. When I tried to delete the old folder the computer sat around thinking saying it was 'moving' but not doing anything. So, I cancelled the operation in the Task Manager. When I attempted to open any folder from the start menu
or desktop or task bar I was presented with a bunch of numbers and letters and the message "REMOTE PROCEDURE CALL FAILED AND DID NOT EXECUTE."
I quickly googled the message realising I'd made a major error and the first response was to type in services.msc or something to that effect, so I typed that into the Start Menu search bar and hit enter and nothing came up. So, I tried again, but now I
couldn't type anything into the search bar, I could not even select any programs from the Start Menu.
So, I can't access the Start Menu, search bar, or any of the folders unless I open uTorrent, select open containing folder, and from there I can access what I need.
I'm too afraid to reboot the PC. I can't locate my copy of Windows 7 anywhere. I'm freaking out!!
Before I pour my lowly student wage into getting a professional to fix it, could someone please offer some suggestions??
Greatly appreciated in advance.
Paris, Texas.

Hi,
Based on your description, for this question is more related to NetQueryDisplayInformation() API, in order to get better help, we may ask for suggestions in the following MSDN forum.
MSDN Forum
https://social.msdn.microsoft.com/Forums/en-US/home
Besides, we can try to use a script to get all domain users. Regarding this point, the following script can be referred to as reference.
How to list all active directory users in a particular domain using PowerShell
https://gallery.technet.microsoft.com/office/How-to-list-all-active-0d9be7ce
In addition, for scripts, we can also ask for help in the following forum.
The Official Scripting Guys Forum
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/home?forum=ITCG
Best regards
Frank Shen

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

I recently bought a dbx hardware compressor and am not quite sure how to use it in logic express 9. I hav a focusrite saffire 6 usb audio interface and am not dont how to use it in logic. Please help???

MUYconfundido wrote:
Pancenter,
Thanks for the response, but I do not have a midi interface. I am using a midi to usb connector cable, thus bypassing the need for a Midi interface.
The Mac reads the USB cable as a midi device, but not the keyboard that I am trying to use as a controller. I have tried it with my korg sp 300 and with my Nord Electro 2.
Thoughts?
Thanks,
Tristan
Tristan...
This is what you have, correct?
http://www.alesis.com/usbmidicable
This from Alesis..
"The AudioLink Series USB cable receives and outputs MIDI signal thanks to its internal interface. The USB-MIDI Cable connects plug-and-play to your Mac or PC for an all-in-one USB-MIDI solution."
Notice, -internal interface-. What you have is a simple USB MIDI Interface. Most MIDI interfaces are USB.
My point is (was), MIDI OUT of the Korg goes to the connector marked MIDI IN on the Alesis, those new to MIDI often get this wrong.
pancenter-

Caller name and number not displaying on my iphone 4s

Caller name and number not appearing on my iphone 4s..

Hello mukundaniyengar,
We've an article that provides a few additional troubleshooting steps that may help get your iPhone's speaker working again.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180
Cheers,
Allen

My iPad will not charge off my cars USB audio socket any more, will light up and states NOT CHARGING in the top right hand corner?

My iPad will not charge off my cars USB audio socket any more, will light up and states NOT CHARGING in the top right hand corner? Is this normal? the USB will charge other devices.

Did it charge earlier? Did you try a different cable?

Address and Number not matching?

I moved in to a brand new house on 25/05 and was given an install date for my phone line of 07/06 by BT. I had originally signed up to Sky but they had all sorts of issues with our address and eventually admitted with days to go that they had no plans of installing a line, so I duly cancelled the order and registered for BT. I am beginning to think that the issues we are experiencing with BT are the same ones which made me cancel the Sky order.
My boyfriend phoned BT on the 7th after no-one turned up and was advised that there were some issues with our line but the message was and has continued to be somewhat fuzzy. We keep getting delays for ordering broadband and I've finally been told that it's due to the address and line not matching. I've been given a date of 30/06 for this to be looked at but not idea of whether anything will actually happen or if the date will just be extended. Can anyone tell me exactly what this problem is and how it is rectified?
Our house is one of the first ones in the development with a different postcode and we've had issues with other companies thinking that we're also under the development postcode. Both driving licences came back with the wrong postcode after I wrote the correct one on and our mortgage provider couldn't provide us with insurance because their database was wrong. The post office site is one of the only places which has the correct postcode. I've tried going through a dummy order on the BT site and our house number comes up if I key in the wrong postcode but not the right one.
Will I have any issues later on if I just tell BT to change the postcode on our account? I fully believe that this will solve the problem for now but obviously I don't want to cause further complications.
Thanks

Hi Hollie04,
If your in a new house then your local authority may need to register your address. You can check if your on the Royal Mail Data base by going here http://www.royalmail.com/postcode-finder . If it can't find your address then is likely that your not currently in the database.
To report an errorr with Royal Mail then visit: http://www.royalmail.com/customer-service/personal-customers/receiving-mail/my-address-not-registere...
Another indicator is if you are recieving any post.
BT probably obtain the address from the Royal Mail's database along with other organisations like the DVLA
cheers,
James
jac_95 | BT.com Help Site | BT Service Status
Someone Solved Your Question?
Please let other members know by clicking on ’Mark as Accepted Solution’
Try a Search
See if someone in the community had the same problem and how they got it resolved.

RESTORE - Kernel   Bad page - header and trailer not matching

Hello,
I have a Problem with the recover of my backup.
When i want to make a restore of the Database this error is shown in Logfile KNLDIAGERR
2008-11-26 21:20:38                               --- Starting GMT 2008-11-26 20:20:38           7.5.0    Build 032-123-111-699
2008-11-26 21:26:57      0xE0C ERR 20005 Kernel   Bad page - header and trailer not matching
2008-11-26 21:26:57      0xE0C ERR 20006 Kernel   Header [ 5277032 - data - tab - checksumData - empty ]
2008-11-26 21:26:57      0xE0C ERR 20007 Kernel   Trailer[ 0 - data - nil - chckNil - empty ]
2008-11-26 21:26:57      0xE0C ERR 52015 RESTORE write/check count mismatch 5277032
2008-11-26 21:26:57      0xDFC ERR 52012 RESTORE error occured, basis_err 300
2008-11-26 21:26:57      0xDFC ERR 51080 SYSERROR -9026 BD Bad datapage
any Help ?
thanks a lot
Steven

Hi Steven,
the database kernel checks with every read the header trailer. If it got a mismatch during read the error message you got is logged.
The same checkes will be executed when you create a backup. You told us that the backup could be executed without any errors and that the system where you created the backup is ok as well -> you executed a Check data?
Now everything looks like the error is in the backup and happened during writies to the external backup medium. Or the backup is ok and then the error happens during read from the external medium.
To get closer to the reason where the problem is located I need to have some more information.
1. You did the restore several times?
2. Did the bad Data Page shappens always on the same page -> Check knldiag.err
3. Did you do your backup on tape?
4. Did you try to create a backup into a file?
5. Does the restore from file got the error as well?
Regards, Christiane Hienger

My album art is scrambled and does not match song or artist, iphone4

My album art is scrambled and does not match song or artist, iphone4

I can't promise this is going to work, but you can give it a try.
1. In iTunes, select your Ipod under Devices.
2. In the Music tab, clear the Display album artwork on your iPod, and then click Apply.
3. Reselect the check box and click Apply.
This worked for me when the artwork stopped displaying.
Good Luck,
30 GB Windows XP

AD authentication : SAM and UPN not matching

BO XI R2 SP1
Windows 2003
We have this environment where SAM account name and UPN are different for all users;
for example, service account SAM is SVC_ACCT_ACNP, but my UPN is apps.center.svc @ pso.dns.com; just like any email address
When UPN and SAM are different, the BO deployment guide on page says to use UPN when trying to log on to Infoview;
we have tried with UPN and everytime we get 'Cannot get realm' error message;
I'm wondering if the deployment guide is not referring to use exact UPN but the UPN like format; for example
SVC_ACCT_ACNP @NW.PSO.DNS.COM where NW.PSO.DNS.COM is the REALM
The reason I'm asking this because after looking at the log file with debug = true in the bscLogin.conf; I found when we use
SAM (SVC_ACCT_ACNP), it passes username as SVC_ACCT_ACNP @NW.PSO.DNS.COM
but when we try to log on to Infoview with UPN (apps.center.svc @ pso.dns.com), then it passes the username as it is; apps.center.svc @ pso.dns.com
Appreciate any help on this. Thank you

If using java SDK 1.5 then you should always try shortname(your normal AD logon name) @DOMAIN.COM where DOMAIN.COM = the Full Qualified Domain Name that the user belongs to, but you should be able to use the AD attribute UPN as well, even if they are different.
If you are on an older version of XIR2 with java SDK 1.4 you will run into quite a few bugs in this regards, best bet is to ensure you have XIR2 SP2 or later and upgrade java SDK to 1.5 if you plan on using java/kerberos. We have it notes key words upgrade java SDK will find it on SMP.
Regards,
Tim

Audio and Video not matching up after compression

I made a video that is 3:18 minutes long and after about 2 minutes, the audio and video don't match up anymore. I have 2 clips in the video that i conformed to 24p in Cinema Tools and i think that they are causing this problem. I noticed that Audio rate of the clips that i conformed, does not match up to the clips which are not. For example, the audio rate of my 59.94 fps clips is 48.0 KHz, and the audio rate of my 24 fps clips is, 19219 KHz. Is there any solution to this problem? I read a post that said i would need to re-digitize the clips, but i don't know how to do this. Can anyone help me?

I still can't figure out how to solve this problem. I tried to resample the audio, but still, same things happening. If you watch the video, the audio goes off about 2 minutes into it. The audio is correctly matched up with the video when i view it in FCP, but every time i compress it, audio goes off in the exact some spot. Here is a link to the video- http://vimeo.com/21619542
Message was edited by: Gray McClamrock

Crop Marks Inaccurate and do not match document size.

8.5 x 11 acrobat file.
There is no scaling.
When printed to HP5500, or Xerox 7500, the crop marks measure 10.6 x 8.22.
This dimension changes depending on what STYLE of crop marks are selected in the ADVANCED section of the print dialog box.
This happens with Acrobat 7Pro and with Acrobat 9Pro.
This must be an issue with this file because it is repeatable on 2 different printers and with 2 versions of acrobat.
How does acrobat decide where to put the crop marks?
The DOCUMENT BOXES are:
Crop = 8.5x11
TrimBox = 7.99x10.34
BleedBox = 7.99x10.34
ArtBox = 7.99x10.34
So how may I output this file on an 12 x 18 sheet and have accurate crop marks print at 8.5 x 11?

I think whoever is generating the files is exporting or printing to pdf with a 1" oversize page setup. 8.5x11=9.5x12
Then someone else is cropping the file. How is the cropping done? We don't know. Using acrobat's crop tool? Using Pit Stop's crop tool? Another third party plug-in?
These files are actually only at a preflight stage. The order entry people need to see what it is and how to write it up for construction (business forms). They then see that crops marks are trimming into copy and alarm flags go off. The pdf is eventually placed into an indd template with the the called for construction. (perfs, stubs, punches, numbering etc.)
We rarely have positioning problems when we select "crop to trim" when importing.
Now the problem is if I set the document boxes to zero as I mentioned, the order entry people have the same but opposite problem. Inaccurate marks 1" LARGER than they are supposed to be.
The original post was 8.5 x 11 document but the art box,, the actual stuff on the page was 7.99x10.34. In that case I think the artist was being lazy and wanted to take an 8.5 x 11 and add bleed to it. The intent would have been to stretch distort the 7.99x10.34 to 8.5 x 11 when placing the pdf in indd. But none of this explaing why, when printing a pdf from acrobat, the marks we get on the paper (in some cases), do not match what we see on the screen or are not in the correct place. Where is acrobat getting the information to create these marks?

Stock in MC.9 and MB5B not matching

Hi,
I am getting stock in MC.9 report and stock in MB5B report not matching for a perticular storage location in a perticular peiod.
Can anyone please help me what may be the reason that both report showing different quantity and value where as both are standard reports.
Waiting for a quick response.
Prasant

Hello,
The stock of MC.9 reflects the complete stock at plant level. It includes also the sock of material which one is send to vendor.(Subcontracting) You can also cross check through MMBE in which stock prov. to vendor is different.
While MB5B had three radio buttons for stock type.
1 - Storage loc/Batch stock - which not include the materials provided to vendor.
2 - Valuated stock - - Total valuated stock as per your selection crieteria.
3 - Special stock -- all the special stock such as subcontracting/pipeline/consignment.
If you click on Valuated radio button and execute it, you will get same stock under head Closing stock and the value will same as the value in MC.9
--Just click Valuated stock radio button.
RGDS
Rajan

Cost in Sales Order and Billing not match

Dear all,
I am facing a problem that the cost in Sales Order and Billing (order-related billing) not match.
The error seems related to sales order is getting moving price (MBEW-VERPR) as cost but billing is calculated by issued amount / qty.
Here's the detail (refer to the screen captures).
Sales qty = 1330 PC.
Local currency = HKD, sales doc currency = RMB, exchange rate = 1.26215.
Condition type ZCSR, condition category = G (Internal price).
When creating sales order ,
Cost is take from MBEW-VERPR => 1.86 HKD
Cost converted to doc currency => 1.473 RMB => 1.47 RMB
Total amount = 1,330 x 1.47 = 1,955.10 RMB
When creating billing from the delivery note,
Cost seems taking from total value divided by total stock in the article doc.
Cost = 2,477.82 / 1,330 = 1.863022556390 HKD => 1.476 RMB => 1.48 RMB.
Total amount = 1330 x [(2,477.82 / 1,330) / 1.26215] = 1,963.17 RMB
My goal is to align the same cost and amount in sales order and billing.
Please help.
Thank you very much.

Dear joan,
Thank you very much for your advise.
I implemented example 1 as in note 24832, trying to disable price re-determination in billing.
However it doesn't work.
Added code in example 1:
Copy control Delivery type LF to invoice F2, pricing type changed to X:
Still ZCSR re-determined but not copying from sales order (1.47 RMB):

Audio and video not matching up at the end of the vid

Im useing videora for ipod and it starts out fine but at the end of the video like last 20 mins the voice slowly start to not match with the video..anyone know what i can do?

the itunes doesnt play the sound but when its on the ipod it plays back fine till the last 20 mins or so.

Any risks if call interface and database not matched?

Similar Messages

Maybe you are looking for