Any rules for tolerance when comparing features ?

The following selects create different results - depending on tolerance:
select sdo_geom.relate(b.geom,'determine', c.geom, 0.0005) from cds_tsur c, kwi b where b.FID = 100383 and c.FID= 81070
SDO_GEOM.RELATE(B.GEOM,'DETERMINE',C.GEOM,0.0005)
TOUCH
1 Zeilen ausgewÃ¤hlt.
select sdo_geom.relate(b.geom,'determine', c.geom, 0.005) from cds_tsur c, kwi b where b.FID = 100383 and c.FID= 81070
SDO_GEOM.RELATE(B.GEOM,'DETERMINE',C.GEOM,0.005)
OVERLAPBDYINTERSECT
1 Zeilen ausgewÃ¤hlt.
select sdo_geom.relate(b.geom,'determine', c.geom, 0.00005) from cds_tsur c, kwi b where b.FID = 100383 and c.FID= 81070
SDO_GEOM.RELATE(B.GEOM,'DETERMINE',C.GEOM,0.00005)
OVERLAPBDYINTERSECT
1 Zeilen ausgewÃ¤hlt
Tolerance in sdo_geom_metadata are set to 0.0005 for both features and the two features should give OVERLAPBDYINTERSECT as correct result.
The intersection geometries touch from inside - so the result with correct tolerance is wrong - why ?
The geometries are:
select geom from kwi where fid=100383
SDO_GEOMETRY(SDO_GTYPE(2003) SDO_SRID(352257) SDO_POINT(X(NULL) Y(NULL) Z(NULL) ) SDO_ELEM_INFO(1,5,1,1,2,1) SDO_ORDINATES(576863.947,184551.008,576907.163,184556.205,576916.222,184557.947,576921.412,184559.777,576923.228,184561.808,576924.342,184564.348,576924.065,184567.333,576922.75,184570.026,576920.193,184572.07,576877.897,184588.775,576853.214,184598.268,576795.747,184621.742,576787.263,184622.872,576754.742,184632.104,576753.411,184628.218,576747.984,184612.342,576739.436,184615.207,576739.363,184607.224,576744.35,184539.84,576779.199,184542.784,576841.041,184548.585,576845.119,184548.974,576863.947,184551.008) )
1 Zeilen ausgewÃ¤hlt.
select geom from cds_tsur where fid=81070
SDO_GEOMETRY(SDO_GTYPE(2003) SDO_SRID(352257) SDO_POINT(X(NULL) Y(NULL) Z(NULL) ) SDO_ELEM_INFO(1,5,16,1,2,2,5,2,1,7,2,2,15,2,1,17,2,2,21,2,1,23,2,2,31,2,1,37,2,2,49,2,1,111,2,2,123,2,1,129,2,2,133,2,1,143,2,2,151,2,1) SDO_ORDINATES(576713.673,184536.847,576727.45566842,184537.345849939,576741.227,184538.095,576748.978,184538.747,576751.725126298,184539.486323548,576754.307,184540.681,576757.465739213,184541.899989232,576760.809,184542.435,576780.224,184544.077,576783.665230547,184544.012099099,576787.072,184543.522,576795.168,184544.282,576791.785829171,184544.583363022,576788.412,184544.967,576784.135321678,184545.595244187,576779.816,184545.763,576771.161,184545.072,576769.799,184544.947,576760.027,184544.175,576758.365616445,184543.937446758,576756.744,184543.505,576755.664531216,184543.153941458,576754.629,184542.689,576751.977859359,184541.375077806,576749.24,184540.253,576744.35,184539.84,576738.862,184539.391,576735.302,184539.074,576734.57,184539.009,576716.093,184538.11,576707.601,184538.204,576698.405,184538.307,576694.152,184538.354,576675.864,184538.818,576666.535,184539.191,576660.762,184539.422,576653.519,184539.813,576648.664,184540.037,576633.345,184540.743,576615.036,184541.589,576605.665,184541.962,576595.457,184542.368,576591.695,184542.45,576573.663,184542.868,576554.836,184542.817,576541.274,184542.742,576537.256,184542.59,576527.989,184542.238,576526.888,184542.196,576523.847,184542.186,576520.049,184541.683,576514.852,184540.995,576511.085,184540.497,576492.886,184536.963,576466.868,184530.902,576462.382,184529.924,576456.976832352,184528.945890557,576451.52,184528.317,576446.500808665,184528.260983225,576441.51,184528.797,576437.552963168,184529.732446611,576433.635,184530.82,576429.735,184532.256,576428.961,184530.796,576430.348,184530.219,576439.714102913,184527.401197334,576449.469,184526.69,576452.471,184526.85,576456.49,184527.172,576459.554,184527.643,576468.575,184529.757,576496.943,184536.364,576511.013433897,184538.92157325,576525.217,184540.588,576534.612354656,184541.075001431,576544.017,184541.325,576578.104,184541.324,576610.634,184540.332,576653.18,184538.404,576671.221,184537.524,576693.634,184536.985,576713.673,184536.847) )
1 Zeilen ausgewÃ¤hlt.
Any idea of this strange conditions ?
Toni

Hi, This looks like bug 3970503, which is marked as fixed in 10.2. I'm not sure it's the same though, so this is bug 4200444

Similar Messages

Any rules for how long a creditor can wait to report a delinquincy?

I have been working very hard for years to rebuild my credit. I was getting close to the 700 mark, as my mess ups as a teenager rolled off. Then, two weeks ago, a medical debt popped up from 2012. Now, in 2012 I had already started trying to repair my credit, so I am actually fairly sure I paid the bill. I just have no clue how to prove that three years later. Are there any rules that dictate the time they have to report this?How do I know it is worth disputing?

No. The FCRA only requires that information reported must not knowingly be inaccurate.There are no requirements that they must report, or how long after the fact they must report. What they must report is the month and year that the delinquency occured, as the CRA needs that date to assess when they must exclude the delinquency from credit reports they issue.

Error in global conversion rule for InfoObject when Activating 2LIS_11_V_IT

Hello,
I am facing several issues while activating the Content. For 2LIS_11_V_ITM I get the following message:
Error in global conversion rule for InfoObject 0INCOTERMS2
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0INCOTERMS2.
System Response
The function module delivers the following error message:
Incorrect statament: Expression missing Operand mi
Procedure
Check the definition of the global conversion rule for an InfoObject.
Any suggestion?
thanks,

Hi Mohan,
seems this message is common when activating BI_CONT.
I believe what i did was:
- go to the InfoObject
- verified Object Routine (check) (then was ok).
- Removed Object form DS
- Activated DS (w/o info object was giving problems)
- Placed InfoObject back to the DS
- Activated DS but now including Info Object
Believe that worked for me.
Let me know how it goes.

Is there any rule for the JAVA_HOME variable?

Is there any rule or guideline about the JAVA_HOME variable regarding what should be its contents and how java applications should treat it? Or does it only depend on the particular application?
If there is such rule, could you give me a URL?
Thanks

garava wrote:
JAVA_HOME
is an environment variable. It tells you where is your JAVA installed. It can be used to specify PATH for JAVA. It also tells you which JDK you have in your machine, alternatively you can also do the same using java -version.
Bottom line is it is an environment variable for Java applications.This is misleading. The environment variable JAVA_HOME is used by some applications to find the JRE but it is not mandated by the JRE or the compiler.

Any lib for wildcast String compare

Hallo,
Is there any lib supporting String wildcast compare? as filename style in DOS or unix, "files*", "files??To compare".

http://jakarta.apache.org/oro/index.html

Will there be any impact for OSD when upgrading ADK/MDT/R2?

We’re planning to upgrade our production ConfigMgr environment so that we can deploy Server 2012 and Windows 8.1.
Currently we have ConfigMgr 2012 SP1 CU3 with MDT 2012 Update 1 and Windows ADK 8.0. We have one Primary site and several secondaries.
My understanding is that I need to do the following:
Upgrade Windows ADK 8.0 to 8.1 (uninstall 8.0, install 8.1 on our Primary site)
Upgrade MDT 2012 U1 to MDT 2013 on our Primary site
Install ConfigMgr 2012 R2 on our Primary site
My primary concern with this upgrade is that we are in the middle of our Windows XP to 7 migration.
I am using an MDT 2012 U1 integrated deployment task sequence including the MDT 2012 toolkit, settings, USMT, and MDT database.
I am looking for feedback/links/resources/horror stories from others who have already been through this.
I would like to minimize OS deployment downtime and plan accordingly for outages.
Here are some concerns that I have:
Will uninstalling/reinstalling ADK have any effect on my existing production task sequence deployments?
They use a USMT 5 package from ADK 8.0
Will upgrading MDT from 2012 U1 to 2013 have any effect on my existing deployment task sequence toolkit, settings, boot image packages etc…
Are there any “gotchas” with the R2 upgrade that will impact my existing deployment task sequences or any ConfigMgr 2012 components (app deployment, software updates etc...)?
Any advice or links are appreciated. Thanks in advance!
-FP

We were in a similar boat, XP->Win7 migration and needed to do our R2 upgrade. We postponed the upgrade until just a month or two ago, and for good reason.
We found alot of issues with OSD, but have been able to resolve them fairly quickly.
WinPE 4.0 boot images must be rebuilt as WinPE 5.0 (this was expected)
Our WinPE 5.0 boot image could not contact the MP because of our HTTPS MPs in the DMZ. Had to stand up internal HTTPS MPs so boot clients could download Task Sequence policy.
All task sequences had to be recreated (we integrate with MDT and 1E Nomad) (this was also expected)
We are still fighting through our issues, but our biggest one just arose last week. Our OS images need rebuilt. We only have three, but we are going through that process now.
Microsoft has not confirmed the upgrade caused the OS image issues, but they recommend we rebuild to be safe.
The symptoms we saw were IE errors, desktop profile errors, DISM errors loading drivers, and black screen/white cursor hangs during Windows Setup. All issues were intermittent, one machine would build fine, another wouldnt.
I dont know what we messed up or configured that caused all this trouble, but the R2 upgrade was the trigger that caused it all to break.
Personally, I would definitely wait until your Win7 migration is complete, unless you can risk the possibility of having to rebuild everything if things go awry.
Daniel Ratliff | http://www.PotentEngineer.com

Any Plan for JDeveloper to have feature requests like SQL Developer

Recently SQL Developer has come up with "Feature requests" link where users can request for feature requests or see the existing ones.
http://htmldb.oracle.com/pls/otn/f?p=42626:37:3434730358746967::NO:::
This sort of feature will be very useful in one place instead of using JDev Forum for feature requests.

Hi,
yes, we like the idea and we are looking into this.
Frank

Is there any discount for iPads when buying iMac?

My wife and I are purchasing an iMac in the near future and we would like to get an iPad. We both have macbook pros, and when we purchased them (a few years ago) we both vaguely remember promotion that discounted iPads. We are both students and plan to use the student pricing on the iMac. Thanks!

There are no educational discounts on the iPad for individual purchasers. If you buy your iMac and iPad from an independent dealer, though, you may be able to negotiate something, and that may end up being less expensive overall than buying the iMac with Apple's educational discount.
Regards.

Is there any Specific rule for using "IS" and "AS" keyword?

Hi,
i am confused about the use of these two keywords "IS" and "AS".It seems to me they are used randomly anywhere in procedure,package or triggers etc..
Is there any rule for there usages , or only way is to remember the actual syntax whenever they are used ?

They are generally interchangeable, so you can use whichever you choose.
In the English language we say that "some object IS" and "do an action AS" so, for example...
in a package if we define a type it reads better as:
TYPE mytype IS TABLE OF NUMBER;because we are saying that this type called mytype IS a table of numbers.
but if we were to create the type on the database we would use e.g.
CREATE OR REPLACE TYPE mytype AS RECORD (x number, y number);because we are saying that we are creating (action) a type called mytype AS a record.
Just a slight difference in grammatical meaning, but Oracle isn't bothered if you choose to use the other one in most cases.

Maintain tolerance limits for tolerance key PE (CoCode S001)

Dear all
im getting error when i creating PO
Maintain tolerance limits for tolerance key PE (CoCode S001)
Please help me
Regards
venu gopal

Hi
You need to maintain the Tolerance key
PE Price variance, Purchasing
Tolerance limit for system message no. 207. This message appears if the specified effective price exceeds the predefined tolerances when compared with the material price.
Maintain the tolearnce key in
SPRO-> IMG-> Materials Management-> Purchasing-> Purchase Order-> Set Tolerance Limits for Price Variance
If you want the sytem to propmt for a warning or Error message you can configure the same in
SPRO-> IMG-> Materials Management-> Purchasing-> Environment Data-> Define Attributes of System Messages

Do not find the option for windows when I press the the option key during restart, since I downloaded Lion

I still do not find any option for windows when I restart my mac when pressing the option key. It used to go to windows when I pressed the option key during a restart but since I have downloaded Lion, it always go to mac. I do not want to make a permanent switch. ANy suggestions on how to get back to using the option key?

You probably need to reinstall your Windows machine.
I'm not certain, but I have a feeling the install of Lion wipes it out, going by the number of threads started along similar lines since Lion's release.

'Activation error..' message when uploading rules for multiple territories

Hi All,
When trying to upload rules for multiple territories using Excel, only a few territories get activated and for the rest an error saying 'Activation Error for Function <hexadecimal values>...N: see following message for details' is displayed. It was found that this is due to the territories getting locked.
The create_rule() and save_rule() methods of CL_CRM_FDT class and FM CRM_TERRMAN_LINK_BUFFER_UPDATE are used for this functionality.
Kindly suggest some ways to unlock or any other alternatives.
Thanks & Regards
Jagathshree

Hi Leonie,
Thanks for your reply.
Error message below. The preview is fine . I can discount the first 2messages as its a new computer so plenty of disk space and upload doesn't seem to be interrupted. I have uploaded to iphoto before. have tried to upload 3times with the same error message. I had to photo my slides with a Kaiser Baas photo maker , which apparently doesn't scan but takes photos in megapixels of the slides. I am wondering now if the format is incompatible though they are jpg files or the colour type wrong. The image files are around 1-3 mb each and 72 ppi. I think I will now scan them properly with a scanner to 300dpi anyway to improve quality.
Apple talks about image files not being too big for uploading but gives no sizing of what too big is?
Error message
1. Upload Error. Loss of connection or file corruption during order upload may cause an incomplete order. Resubmitting your order usually resolves this issue.
2. Low Disk Space. If your computer is running on low disk space, your files may be assembled incorrectly. Create more space by deleting unused files.
3. Unreadable PDF file or image files. Files are sometimes assembled incorrectly due to CMYK or Grayscale color space. Use the RGB color space for best results.

Where do I set up rules for conflict resolution when syncing iTunes with Outlook?

I just got an iPhone 5 and I'm coming from a Blackberry. I've been syncing Outlook Calendar and Contacts to a portable device for over 10 years, even back in the day of the pocket pc and more recently the Blackberry. My iPhone 5 syncs great and seemlessly with Outlook using iTunes. I've had no issues as of yet. The problem for me is, it just seems "too" easy. I didn't see anywhere where I could set rules for conflict resolutions. For example, if your pc says one thing but your iPhone says another, who wins and supercedes the other? What if by accident your iPhone loses all of its data, then iTunes syncs with your pc - will it delete all the Outlook data on your pc because it thinks it's syncing with updated data from your iPhone? (in my case data I've had for over 10 years)
With the Blackberry software it asked you to set up rules for conflict resolution when first connecting the phone (including an option to ask you first). In my case, I chose to have it ask me whenever it discovered a conflict. So whenever I synced, it specifically alerted me exactly how many items are being synced, and then if there were any conflicts, it'd stop and then ask me which device I want to supercede the other. This gave me a lot of piece of mind. Now after getting my iPhone and using iTunes to sync, it's been great so far but I have to say that I don't have as much piece of mind. Does anyone have any feedback on how to set up conflict resolution with iTunes and Outlook or does it not exist at all? Again, what would happen if there was a conflict between the two devices?

Yes! Thankyou for that. I had of course put the context.xml file in the web-inf directory.
I followed your example to the letter and it still wouldn't work. Or rather, I followed to the letter expect for the difference between "WEB" and "META".
Once I worked that out, it started working like a dream.
Note to anyone else who has a similar problem, make sure you REALLY look at the answer given. Make sure you REALLY do have all the files in the suggested places. It will save you time.
Thanks again.

Error in global conversion rule for InfoObject 0PERSLANGU when activating

Dear Experts
We are working on HR in BI7.0 with Ehp1.
I am trying to Activate the Transfer Rules of 0HR_PA_PA_1 DataSource which has the BID (BW Development) as the Source System to itself in order to load 0PAPA_C02 (Headcount) InfoCube.
When trying to Activate, it gives the following error message:
Error in global conversion rule for InfoObject 0PERSLANGU
Message no. RSAR263
Diagnosis
Errors with the global conversion rule for the field 0PERSLANGU.
System Response
The function module delivers the following error message:
Incorrect statament: Expression missing Operand mi
Procedure
Check the definition of the global conversion rule for an InfoObject.
In fact, we are Re-implementing 3.0b BW System in new BI7.0 Ehp1 System. I have checked the Config of InfoObject 0PERSLANGU to the one available in existing BWP (3.0b Production) system and it's all the same.
Has anyone come across similar error message and how did you resolve. Any help is very much appreciated.
Many Thanks,
Chandu

HI Chandu ,
It is a bug in the system , can you take a look at the SAP note
Note 1070702 - RSAR 263: Error in global conversion rule for InfoObject
Hope it helps ,
Regards,'
Sathya

Alert Rules vs Alert Category - Is there any limitations for multiple rules

I have an alert configuration implemented already and i want to add few more rules for the same alert category. While creating the rules for new set of scenarios, I am able to create only one rule . Is there any limitations for having the rules per category ?

Hi,
If the Suppress Multiple Alerts of This Rule checkbox is selected (default setting), then no further alerts are generated once the rule has been met until the first alert has been confirmed.
There is no limitation of creating alert rule for a particular alert category.
Check out the steps of Alert rule configuration.
Creating Alert Rules
To create an alert rule in which you use a defined alert category, proceed as follows:
       1.      Give the rule a name (Description).
       2.      Select the alert category that you want to use by clicking the corresponding category in the alert category table.
       3.      If necessary, specify conditions for the sender or receiver, or both.
○       If your rule results in alerts that must be assigned to a specific message, select the option Yes for the Bound to Message condition.
○       If your rule results in alerts that are not assigned to a message, that is, they are caused by errors that occurred before the message was sent, select the option No for the Bound to Message condition.
In this case you cannot enter any further details about the sender or receiver.
○       If the rule is to cover both cases, select the Not Relevant option.
       4.      If required, restrict the errors further to:
○       Errors reported from the Integration Engine (with or without error category or error code)
○       Errors reported from the Adapter Engine (with or without adapter type)
You can enter an asterisk (*) in steps 3 and 4. You can enter just the asterisk, or enter it at the start, end, or start and end of a string.
       5.      To add the new rule to the list of alert rules, choose Add Rule.
If the Rule Activated check box is selected (default setting), the rule is automatically activated when you add it and is displayed as active.
If the Suppress Multiple Alerts of This Rule checkbox is selected (default setting), then no further alerts are generated once the rule has been met until the first alert has been confirmed.
Once you have created a rule, it is automatically displayed in the list of alert rules. If you want to display the conditions of a rule, select a rule in the list and choose Show Conditions.
Hope this will help you.
Regards
Aashish Sinha
PS : reward point if helpful

Any rules for tolerance when comparing features ?

Similar Messages

Maybe you are looking for