Any Tool or Method to Find out the Diff in Code betn two forms

Hi all,
Pls can anyone guide how to see all the differences between 2 same forms in terms of code. I would like to know if there is any method or an tool availaible for this.
Thanks
Vinod

Besides the methods suggested by Stefan, you could also try :-
1) Generating text .FMT files and the using UNIX utility
DIFF to compare the 2 versions of the forms
OR
2) Write a small code to read the FMT files using
TEXT_IO package (Using Forms) and compare the files
i.e The idea here is to read line by line the
2 FMT files
Rgds,
Shailender

Similar Messages

  • I havev installed a new Hard Drive on my laptop but cannot find my Photoshop Elements product box with the serial number to install Elements 10 or Elememts Premier 10. How can I find out the serial / installation codes for these?

    I havev installed a new Hard Drive on my laptop but cannot find my Photoshop Elements product box with the serial number to install Elements 10 or Elememts Premier 10. How can I find out the serial / installation codes for these? I saw a reply however, it was not my name and assumed it was for someone else. Now timed out. Can UI still have help on this matter please?

    If you registered PSE before, go to the main page of adobe.com, sign in and go to your account and you should find the serial number there in your purchases.

  • How to find out the user Country code in flex

    Hi all,
              I want to find out the country code, to load dynamic localization swfs.
      example : my swf file name
                     en_US_res.swf
    by using capabilities.langueage am getting the local user langueage, am not able to find the locale country code. please help me out
    Thanks!!

    Hi Jesudasan ,
    You can know the user details with version management.Please find the
    below procedure to know.
    Go to table->Utilities tab->version->Version management->Compare the previous one .
    Hope this solves the issue,Let me know if you have any issues.
    Thanks,
    Rajani

  • I want to find out the po release code it is updated in which table

    DEAR ALL,
    Any body can help me out for finding where the PO RELEASE CODE IS UPDATED IN WHICH TABLE . I can get the release code in ekko table . so i need to find out the release code where it is getting updated

    The details can be found in EKKO table's FRGKE field.
    Here
    1 -> Blocked
    2 -> Released
    The codes may be different in your system as per your configuration.
    Regards,
    Bhavin

  • How do i find out the parental lock code, i am the parent and i don't remember setting a restriction.

    My son's ipod is asking for the code to remove the parental restrictions, I am the parent and i don't remember putting in any restriction code. Any idea how to find out what it is?

    Forgotten RESTRICTIONS Passcode
    - Restore from a backup that was make before you added the Restrictions passcode. If you restore from a backup made with the Restrictions passcode the Restrictions passcode is also restored. Place the iOS device in Recovery Mode if necessary to allow the restore.
    - Restore to factory settings/new iPod.                
    - If you are up to file manipulation see the following but it may not work for iOS 6.1.3:
    How to reset forgotten Restrictions...: Apple Support Communities
    - How to Recover Restrictions Forgotten iPhone Restrictions Passcode | The iPhone and iPad Blog

  • Is there any tool or method to find the exact disk space/memory required for a query to execute in certain time

    Hi,
    We have SSIS Package, which in-turn executes some Stored procedures . 
    This Package runs fine at certain time, say 30 minutes which is acceptable. But sometimes, it takes around 1.5 hr. There was no modification done to the package, and the amount of data handled by the package is also same.
    I have a doubt that some other big process may be running in parallel when this package is getting executed.
    All the Databases are on D drive in the server and currently there is 140 GB free space out of 1 TB.
    Now, using sp_who2 I can check what are the big processes which are running in parallel when this package is getting executed and get their Disk I/O.   
    Now having these information, is there any way to determine, amount of space/memory required to execute a particular query in 30 minutes.
    Or to put a question in other way, I have a query and I know its acceptable execution time(30 min). Now is there any way to determine the criteria to get that execution time.
    NOTE: The query is optimized and required indexes are created. It was running fine, until 1 week back. Suddenly the execution time has increased.
    Can some one please help me in this. Please let me know if you need any further information on this.
    Also whenever these jobs are running, sometimes job activity monitor and SSMS gets frozen. Any idea what does this indicate?
    Thanks in advance,
    Raksha

    Perhaps blocking?
    Take a look at Adam's great stored procedure to see who is running on the server
    Who Is Active? v10.00 (2010-10-21)
    (C) 2007-2010, Adam Machanic
    Feedback: mailto:[email protected]
    Updates: http://sqlblog.com/blogs/adam_machanic/archive/tags/who+is+active/default.aspx
    "Beta" Builds: http://sqlblog.com/files/folders/beta/tags/who+is+active/default.aspx
    License: 
    Who is Active? is free to download and use for personal, educational, and internal 
    corporate purposes, provided that this header is preserved. Redistribution or sale 
    of Who is Active?, in whole or in part, is prohibited without the author's express 
    written consent.
    Best Regards,Uri Dimant SQL Server MVP,
    http://sqlblog.com/blogs/uri_dimant/
    MS SQL optimization: MS SQL Development and Optimization
    MS SQL Consulting:
    Large scale of database and data cleansing
    Remote DBA Services:
    Improves MS SQL Database Performance
    SQL Server Integration Services:
    Business Intelligence

  • Any plug-in api to find out the product info.

    Hi ,
    Is there any plug-in api which can provide information about product name in which it is loaded ...like this plug-in is loaded with Acrobat Reader or Acrobat Professional ?
    Regards,
    Arvind

    Thanks Leonard,
    Yes, I found api named ASGetConfiguration(ASAtomFromString("Product")) for this.

  • HT4718 hi. okay so I updated my mac and now i can't open my iMovie and my iPhoto because I downloaded them from a separate account, which I don't remember. Is there any way that i can find out the apple id i used to download these two apps?

    Or is there another way i could download iphoto and imovie? (cuz when i try to download it with my new id it says that it cannot be purchased with my new id.)

    I'm not sure if this will work, but try using LaunchPad. Hold down the option key while hovering over iPhoto and click the X that appears.
    If the Option key doesn't make it show, click and hold until it giggles. Then the x should appear.

  • How to find out the percentage of code loaded using the load instrument vi

    i am loading my software through preload instrument.vi. Is there any way to know the percentage of the vi loaded, in parallel when the vi is getting loaded.

    I do not think so.
    If you carefully watch other loaders, you will see that the bars do not not update at a constant rate. They usually update in chunk fasion.
    You could get the size of all of the VI before starting the loads and update your progress bar based on percent of total code loaded. If smooth updatesis readlly important, you could track the load time vs files size and use that to do some periodic incremental updates.
    Cluge? yes!
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Does anyone have any idea how to find out the version of weblogic plugin

    Does anyone have any idea about how to find out the current version of weblogic plugin used to connect from webserver to weblogic server?
    I could not find version in plugin directory.
    it's the same one that came prepackaged with Weblogic 9.2. we haven't change it.
    Sun One 6.1 SP6
    Weblogic 9.2
    Solaris 5.10
    Edited by: 985608 on 01-feb-2013 8:20
    Edited by: 985608 on 04-feb-2013 6:25
    Edited by: 985608 on 04-feb-2013 6:27

    Hi,
    You can find version of weblogic plugin using below command.
    strings <plugin module file> | grep -i wlsplugins
    Mark if this helps.
    Regards,
    Kishore

  • How to find out the unused disk space?

    Hi,
    I want to know if there is any way possible by which I can find out the amount of disk space that is available. I have to write an application that checks for the disk space under Windows and Unix platforms. If anything is possible please let me know as soon as possible.

    I know that there is no Java API for it. I tried using the Runtime.getRuntime().exec("cmd /c dir") method to find out the available disk space. But it returns the value through the InputStream which would have to be parsed to get the unused disk space value. If there is a way to write a shell script (for Unix / Linux) and a batch file (for Windows), please do let me know of the same. Also please let me know how to execute the script / batch. Awaiting your reply.

  • How to find out the type of the value stored in a string variable?

    Hi,
    How do i find out the type of the value stored in a string variable?
    for example,
    I have a string variable str, in which the following type of values wil be stored
    1) Intger
    2) Long
    3) boolean
    4) Char
    Is there any method to find out the type of the value, anything like str.getType()?. Please kindly help me. Thanks in advance.

    Hi All, i'm sorry for the double posting, by mistake it occured.
    Thanks for your replies, i have a string variable str, in which the value is stored and i have another string variable type, in which the type of the value is stored.
    For example,
    String str = "15";
    String type = "Integer";
    Is there any way to verify whether the value stroed in str is of type stored in the variable 'type'. I want to write a method of type boolean, it will throw true of the value stored in str is of type 'type'. Thanks

  • How to find out the Release date & Release code of PO's ?

    Dear All,
    Is there any standard reports available to find out the Release date & Release codes of PO's which are already released & the PO's which are pending for release ?
    Regards,

    HI All,
    Thanks a lot for your response.
    In ME2N,ME2M etc..I have to select each single PO line item & then have to go to Header Changes to find out this info.
    So, Is it possible to find out the release codes/release date of all the PO's in a single shot?
    Hope my query is clear.
    Thanks & Regards,

  • Do we have any method to list out the servers that are critical and the component/monitor causing the server to turn into critical state in SCOM 2012

    Hello Team,
    We are monitoring 1000 servers in our environment and out of 1000 servers, we have approximately 100 servers showing as critical state on the server state view.
    We can get the critical servers list from SCOM console, but we are not able to get the information about the component responsible for the server to be critical. Using Health explorer to find the root cause for 100 servers is really impossible and time consuming.
    Do we have any method to list out the servers that are critical and the component/monitor causing the server to turn into critical state?
    Advance thanks for your help.
    Regards,
    Dinesh
    Thanks &amp; Regards, Dinesh

    Hi,
    As far as I know alerts with severity as criticla may cause windows computer in a critical state, we can try below code to find all critical alerts：
    get-alert -criteria 'ResolutionState=0 AND Severity=2' | select Name,ResolutionState,TimeRaised | export-csv c:\Alerts.txt
    Criteria Syntax http://msdn.microsoft.com/en-us/library/bb437603.aspx
    Values to use.
    Resolution State 
    Severity Values for Alerts
    0       =   New
    0 = INFORMATIONAL
    255   =   Closed
    1 = WARNING
    2 = CRITICAL
    Hope this helps.
    Regards,
    Yan Li
    Regards, Yan Li

  • I am an MBA student , doing a research project on e-learning authoring tools, would like to find out no. of licences sold/active to date for adobe captivate. how many get sold every year. any pointers/help is appreciated. cheers.

    I am an MBA student , doing a research project on e-learning authoring tools, would like to find out no. of licences sold/active to date for adobe captivate. how many get sold every year. any pointers/help is appreciated. cheers.

    I doubt you'll get an answer in a user forum, sorry. This forum is meant for users to help other users when they have problems that have to be solved. You should contact Adobe itself.

Maybe you are looking for

  • How to install oracle 8.1.5 / 8.1.6 / 8.1.7 on window xp?

    hi, here i m trying to install oracle 8i on window xp platform but there was an error called "ORACLE NOT FOUND" please give me the solutions for this.It will be very helpful in my project

  • Logitech USB microphone does not work with OS 10.4.11

    My logitech USB microphone was working fine, at one time. Now it does not function. In the sound prefs setup, it shows a level reading, as if it is hearing the input, but there is no output. I have tried every setting I could find in Audio Midi Setup

  • Error of Credentials in Report Builder 3.0

    Hi I am getting an error of credentials while testing the connections for data source in Report Builder 3.0. ERROR Window: Unable to connect to the data source. Please verify the connection properties and credentials. In <<Details Log on failed. Ensu

  • VBKD-TRATY in BAPI_SALESORDER_CREATEFROMDAT2

    Hi Experts, Please confirm how to pass the value of Means of Transport(VBKD-TRATY) to the BAPI BAPI_SALESORDER_CREATEFROMDAT2? Thanks in Advance, Ajith

  • Using presentation variables in report columns

    Hi. I need to create a report column evaluating the difference in days between a field containing a date and a presentation variable. My field is defined as: TIMESTAMPDIFF(SQL_TSI_DAY, "Data Scadenza"."Data Scadenza Fattura", @{DataAnalisiScaduto}) W