Any way to auto-cycle through waypoints?

Hi,
Anyone know if there's a way to automate this "waypoints" script (or if another exists that already does it)?
http://imakewebthings.github.com/jquery-waypoints/
By automate, I mean automatically cycle between waypoints, on a loop.
Thanks!

Emir,
Thanks for the response!   The version we are using is 2006.0.7.1.   The scenario I gave was only an example...   We are looking to address a dictionary permission issue due to regulatory issues.   We have fields in LDAP that contain the regulatory rules and have a need to permission dictionaries (read access) based on these rules.
Just curious...how do you setup filters to ignore users?   Is this manually managed?  &

Similar Messages

  • Issues with AUTO cycling through ....

    I'm trying to do this:
    Any help with one or the other is very much appriciated !!!
    1) When the Timer is finish auto cycling through the tabs (1 to 16) of the ViewStack, and switching over to tab (1) to STOP, I would like to address a function to do something ???
    The question is now how to write the code to ID that the Timer has come to a STOP on tab (1), and how can I incoperate this into the existing (onTimerOne) function.
    2) The second item I'm after is that if I'm amnualy select any tab (1 to 16) to address also a function to do something ???
    3) The third item I'm after is to automaticly zero (0) the ViewStack to tab number (1) if I click a Btn.
    <mx:Script>
    <![CDATA[
        import flash.events.TimerEvent;
        import flash.utils.Timer;
        private var timerOne:Timer;
        private function initOne():void {
            timerOne = new Timer(5000, myViewStack.numChildren);
            timerOne.addEventListener(TimerEvent.TIMER, onTimerOne);
        private function onTimerOne(evt:TimerEvent):void {
            if(myViewStack.selectedIndex == myViewStack.numChildren-1) {
            myViewStack.selectedIndex = 0;
            return;
            myViewStack.selectedIndex++;
        private function autoOne():void {
            if (!timerOne.running) {
            timerOne.start();
        private function manualOne():void {
            if (timerOne.running) {
            timerOne.stop();
    ]]>
    </mx:Script>
    4) Well, the fourth item I'm trying to work out is as I'm reading my data from an Xml file to have a TextArea which shows the different countries from the Xml file for each ViewStack tab while auto cycling through these tabs (1 to 16).
    The diffuculty here is that I use this Xml with a specific urlID="1" to urlId="16" as part shown below.
    <urlsOceania>
        <urlOceania urlID="1"/>
        <searchCountry>American Samoa</searchCountry>
        <etc></etc>
    </urlsOceania>
    I'm reading all the other items this way:
    source="{urlsOceania.urlOceania.(@urID==1).etc}"
    Thanks in advance aktell2007

    Thanks for the confirmation.  7 miles away is most likely using the same VZW tower but it does confirm the problem is not in your current location for us.
    You can look up local tower locations from many public websites such as the following:
    www.antennasearch.com
    www.cellreception.com
    http://www.evdoinfo.com/content/view/2990/63/
    The signal of -65 shows you have strong reception but it doesnt show the entire picture.  Your tower could be overloaded or unauthenticating you.  There are lots of little issues that exist outside of the raw signal strength between the towers and the connecting devices that we users have no control over.  As you may guess only a tower tech has access to identify and correct these things.
    Based on the picture of the back of the MBR1515/Netgear N300 router from Netgear I would assume that only a normal sized SIM card will fit.  I would not assume a micro SIM card will fit.  Since I do not have access to either of the VZW or non-VZW 4G LTE router I cannot confirm if it will work or not.  You might have to give Netgear a call and ask.  Based on what I can see from the User Guides of both devices the SIMs used for each should be compatible with eachother.
    If you decide to purchase the non vzw version please post back your findings for us.

  • Is there any way to control automator through voice commands?

    is there any way to control automator through voice commands?
    Im simply trying to program my macbook pro early 2011 8gigs ram to resound to voice commands using automator but I haven't found any discuss on the subject.

    I have some AppleScript that expects a Pages (v5.2.2) document opened. It will then then speak the document name, and the count of words in the document. Or, I can trigger Speakable items and tell it to, "Switch to Pages" which it does immediately, because this is part of its repertoire of built-in commands. Then speak Word Count?
    In Automator, I created an Application, in which I dragged/dropped the Library > Utilities > Run AppleScript action into the workflow window. I replaced the AppleScript boilerplate with my existing AppleScript code that speaks the word count, and saved the Application into <login dir>/Library/Speech/Speakable Items folder as Word Count? (without the .app extension). It can also be saved in the Application Speakable Items > Pages sub-folder under the general Speakable Items folder.
    Next, I turned on Speakable Items in System Preferences > Accessibility > Speakable Items.
    It took several tries to get a spoken result from the Automator application, but it did work. Even with a calibrated microphone, and speaking about 18 inches from it. About 2 successes for ten tries. If I just put the AppleScript (without extension) in the same folder, my success rate would improve to 5/10. You may grow very weary of the repetition necessary to get Speakable Items to work. A small pink text banner also appears with the spoken content in it — below the Speakable Items monitor on the screen.
    Automator is scriptable. This means that in AppleScript, you can dynamically build an Automator workflow, and then execute it.

  • Is there ANY way to send something through Bluetooth to an android phone?

    Is there ANY way to send something through Bluetooth to an android phone?

    I think I sorted it out:
    On your Mac, go to the Bluetooth preferences panel after pairing your (your android phone) to the Mac.
    Select (your android phone) in the left-hand menu, then use the little cog to pull down a list of options.
    Select "Edit serial ports..."
    Click the '+' icon, and in the Port Settings section, select OBEX Object Push.
    Protocol should be automatically set to RS-232. Click "apply" (and probably "require pairing" to be nice n secure) et voila!!
    so far, so good

  • Is there any way to send sms through j2me

    hi all,
    is there any way to send sms through j2me or any way to communicate with real device through emulator or from emulator to another emulator
    any sugesstions appriciated
    abdul rafiq jani
    applitech solution limted

    what special API where i can get it any link or information about that APi
    regards
    abdul rafiq jani
    Applitech Solution Limited

  • Any way to auto hide the menu bar on the home scree?

    Any way to Auto Hide the menu bar at the top of the home screen?

    Use
    http://www.macupdate.com/app/mac/22217/menufela
    read Previously discussed
    https://discussions.apple.com/message/4727389#4727389

  • HT4539 Is there any way to auto-start the Apple mail app?

    Our company offers a 7/24 service where a user can leave a voice mail in our system and our mail server will send an urgent mail message to the iPhone of the employee on duty so it can be handled in a timely manner. The problem we are having is that if someone turns off their phone and starts it again (or if the user opens the running apps window and shuts down the mail app), the users are not getting those urgent emails.
    While I understand having an auto-starting app would be undesirable, since every developer might start activating that feature, does Apple iOS6 have any way to tell the mail app to restart on iPhone boot? We have a few people using other smartphones with a competing O/S that sounds similar to "asteroid" ;-) and the mail appears to be always operational, even if you shut down the app.

    And be sure to set up Notifications for mail so the phone will beep, buzz, flash, whatever when a message comes in.
    One issue though (discussed elsewhere): the phone will only Notify once. If you didn't hear or see it, there won't be any further warning (unlike, say, Blackberry's flashing LED). You're gonna have to grab the phone and at least bring up the lock screen to see if there are any notifications queued up.

  • I need to redownload songs from the last month. Is there any way to do this through itunes?

    I had to get a new ipod touch through a warranty because of technical problems so I could not transfer my last few purchases (about one month).  Is there any way that I would be able to get these downloads back with out redownloading my entire library.

    From the iTunes Help menu...
    "It’s important to make backups of your purchases from the iTunes Store. If you lose a purchased item for any reason and haven’t backed it up, you’ll have to buy it again."
    With iTunes open, from the menu bar click Help / iTunes Help.
    In the search field on the right type in backup
    Select:  Back up your iPod touch, iPhone, or iPad
    I had to get a new ipod touch through a warranty because of technical problems
    Unfortunately, if you didn't backup your iTunes media to an external source, you might be out of luck but, click here.
    http://www.apple.com/support/itunes/
    Then click: iTunes Store Account and Billing
    Then click: Billing Inquiries
    Then click: Email.
    Stranger things have happened where Apple bent a rule or two.

  • I built a website with iWeb on my older mac and launched it on the internet. The hardrive crashed which was where the files were saved for the website. Is there any way to recover it through the internet onto my newer computer?

    Is there any way to recover this website? I need to edit it but the original files were wiped clean even after recovering what was left on the hard drive.

    iWeb stores its sites and pages in a proprietary package format on the HDD in the user library, and when FTP'ing it to the server, it's a set of PHP and other file types. So, there is no way you can re-build from what's on the server.
    But you may double-check, the file in question on the HDD is ~/Library/Application Support/iWeb/Domain.sites2 (where ~ is your user home folder). Maybe it's somewhere among your recovered files? Restoring it into the same location and copying iWeb into the Applications folder will get you going again.
    Other than that, here is a discussion forum dedicated to iWeb.

  • FM9: Any way to auto-close the insert-variable window?

    Is there any way to have the FM9 variable window automatically close after one selects a variable using the Enter key? I'm finding it cumbersome after calling it up via key commands to have to pick up the mouse and click somewhere just to close the window, or "fly" back into the side panel.

    after youve called the contact and it opens with their name again just tap cancel on top right of screen and it puts you back to the first person in your contacts list.
    its the only way ive found out how to close the cotacts name.

  • Is there any way to auto tag my itunes music?

    I recently transfered my music to a new PC and half my music got mislabeled, most of it has not been downloaded from the itunes store. Are there any cheap or FREE 3rd party or even Apple based programs other than media monkey that will retag my audio files and get artwork. I obviously do not want to sort through all of my songs individually.
    Tuneup, fixtunes and iautoartwork are all a bit too expensive.
    I am looking for something for windows. Thanks!

    I'm not sure how you transfered the music to your new computer, but let's assume you moved the entire iTunes folder with the original .itl file. If that's the case, the solution is very simple. Hold the shift key down, and open iTunes. Do not let up on the shift key until you get a window that asks you to choose a library, or create a new library. If iTunes opens without giving you that choice, just close it and re-open it with the shift key down. Nine times out of Ten it works on the first try. Click "choose a library". You will get another window that allows you to navigate to your hard drive and show iTunes where your music is stored. In a folder called iTunes or iTunes Music, choose "iTunes Library.itl" This should bring back your entire library exactly the way it was when you last used it. Understand that while all of your music is stored in your music folder, information is stored in the .itl file.

  • External hard drive being accessed wirelessly, any way to auto re-mount?

    Hello, I have an external hard drive connected via firewire to an iMac running Panther 10.3.9. It is being accessed wirelessly by a MacBook running 10.4.10 for auto backups. Everything works great, except when either computer is shut down, or when the MacBook is taken out of our home network, I have to remember to manualy re-mount (wirelessly) the firewire drive on the MacBook or else the backup program will not find the destination drive. I have the computers starting/waking automatically 15 minutes prior to the scheduled backup.
    Is there a way to have the external drive automatically re-mount over the network to the MacBook? Can Automator help with this?

    Try this.
    Connect to the remote volume you want to auto-mount and select "Remember password in keychain".
    Once the volume appears on you desktop, open System Preferences and go to the Accounts pane. Select the "Login Items" tab on the right. Drag the icon from the desktop of the remote volume into the Login Items window. You don't have to check "Hide".
    Close System Preferences. When you startup the computer the remote volume should appear on the desktop.
    Hope this helps.

  • Any way to auto insert "" for tag values?

    Hi. Is there a way to get JDev to automatically insert the double-quotes after we type a tag's attribute name? For example, when typing...
    <h:outputText value=
    ...it should auto insert the double quotes when the user has typed value=
    Your help is appreciated. Thanks.

    Hi,
    JDeveloper 11 will be doing this
    Frank

  • Q10 search remains on a contact after search and call - any way to auto close?

    Hi,
    I'm just starting to try out a q10 for work purposes and one issue I ran into several times today...
    After typing in a contact name (to search) and then selecting call or email, making call or writing email and the turning screen off:
    The next time I turn the phone on to search for anything, the contact I had searched before appears. Usually after a few button presses I realize it and by then I'm stuck in editing that contact.
    Is there a way to have the search close after the call/email ?
    Or maybe have it reset after a while ?
    Or, even better would be a gesture I can use from when the screen is off to activate screen and start a new ?
    On that last point, depending on the state that I left the phone in it seems I must to do different things to perform a new contact search...
    For example search is showing a contact already and I'm not on the search screen:
      Swipe up or power button to activate Press a key to start a search Swipe left to leave the contact that was displayed by search
      If search is not showing a contact then I just swipe up and type a name
    Also, different topic but I am really hoping there is a simple solution here:  is there a rapid way to jump straight into the hub?  
    Sometimes I need to swipe up to turn on, swipe up to exit an app the swipe right swipe right and swipe right to get into the hub.  It feels kind of disorienting since it's not always the same procedure and I'd like these things to be "muscle memory."  
    Thanks, 
    Dave

    after youve called the contact and it opens with their name again just tap cancel on top right of screen and it puts you back to the first person in your contacts list.
    its the only way ive found out how to close the cotacts name.

  • T400: Is the any way to auto switch between discrete and integrated graaphics

    I would like to have discrete graphics active when docked and integrated graphics active when not docked...and make the switch automajically?  Anyone know how to configure this?
    Thanks
    JC 

    Yes, CC has this covered. And, for that matter, so does CS6.
    In the Project Panel
    select all the clips from Camera A
    right-click and select Create Multi-Camera Source Sequence
    set Synchronize Point to Timecode. Here's where CS6 differs from CC: the latter has an option labeled "Create single multicam source sequence." You can learn more about that new option here: Adobe Premiere Pro Help | Multi-camera editing workflow. (Search for the name of the option.)
    Adjust other multicam settings as desired, then click OK.
    I'm not experienced with this single-camera usage, but one thing I found in my tests that isn't ideal to my mind is that the clips are placed on different tracks. I'll check with an expert tomorrow to see if I'm doing something wrong. Regardless, the important thing is that the gaps are preserved, and you can move the clips to the same track easily enough.

Maybe you are looking for