Any way to auto insert "" for tag values?

Hi. Is there a way to get JDev to automatically insert the double-quotes after we type a tag's attribute name? For example, when typing...
<h:outputText value=
...it should auto insert the double quotes when the user has typed value=
Your help is appreciated. Thanks.

Hi,
JDeveloper 11 will be doing this
Frank

Similar Messages

  • Any thoughts on auto sourcing for a non catalogue request?

    Any thoughts of auto sourcing for a non catalogue request?
    If i have a Contract Purchase Agreement set for a certain Category and if i use the same category in the non catalogue request purchase requisition will the workflow automatically generate the PO?
    Following set to Y
    CONTRACT_REQUIRED_FLAG
    INCLUDE_NON_CATALOG_REQ_FLAG
    USE_CONTRACT_FLAG
    How the price will be determined in the PO in such cases?

    Hi,
    You need to define the sourcing rule, ASL and default assignment sets and map the CPA in the ASL setup.
    This will drive the autocreation of PO.
    Thanks,
    PS.

  • Is there any way to use a For Each Loop for each property of an User Defined Type?

    Is there any way to use a For Each Loop for each property of an User Defined Type? That would be very handy!
    Jorge Barbi Martins ([email protected])

    Alas, no, not in VBA.
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • Is there any way to Authorization Management for Material Components?

    Hello every body
       Is there any way to Authorization Management for Material Components? 
       For example  i want to create , delete , modify  Material Components,how i can Authorization Management ?
       Enhancement or IMG or other ways?
                                                                                    thanks

    Alas, no, not in VBA.
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • Is there any way to raise alerts for stock outages in inventory

    Is there any way to raise alerts for stock outages in inventory

    You can use the Check Material Shortages attribute in the Org items under Inventory tab. Oracle will trigger shortage alert notifucations for the checked items. This works in the conjuntion with the Shortage Parameters defined at the Inv ORg level (these parameters are nothing but what business wants to consider as a shortage in WIP and OM). You can notify the cmp planner/buyer , assy planner/job creator..

  • I bought an iBook  book thinking it was in English.... Turns out its in German any way I can return for a refund?

    I bought an iBook  book thinking it was in English.... Turns out its in German any way I can return for a refund?

    How to report an issue with Your iTunes Store purchase
    http://support.apple.com/kb/HT1933
    iTunes Purchase Problems: How to Report a Problem to iTunes Support
    http://tinyurl.com/7tscpa7
    How to Get a Refund from the App Store
    http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
    Getting Refunds for your iTunes Store Purchases
    http://www.labnol.org/software/itunes-app-store-refunds/13838/
    Canceling a Digital Subscription
    http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/

  • Any way to auto hide the menu bar on the home scree?

    Any way to Auto Hide the menu bar at the top of the home screen?

    Use
    http://www.macupdate.com/app/mac/22217/menufela
    read Previously discussed
    https://discussions.apple.com/message/4727389#4727389

  • Elements 13 : 1. Is there a way to stop the automatic proposal for exemption? 2. Is there any way or an update for the manipulation of the color curves like in Gimp or Paintshop?

    Elements 13 : 1. Is there a way to stop the automatic proposal for exemption?
                           2. Is there any way or an update for the manipulation of the color
                               curves like in Gimp or Paintshop?
                                                        Dankeschön für jede Antwort die weiter hilft!!

    Hey Rich,
    It is true that you cannot add more than 250 plots to a 2d-axis graph in the REPORT.  One work around is to have the graphs stacked on top of each other and plot 250 to one graph and 250 more to another graph.  I am including a TDR (you have to unzip it) file that has 12 2d-axis stacked on top of each other.  Most of the properties have been made invisible through the graph properties.  You can still see the legends however.  One caveat to this is that you will have issues accessing the different graphs.  You have to do it from a VBScript.  The following line of code worked for me:
    Call GraphObjOpen("2DAxis" + Str(NewAxis))
    Where NewAxis is a variable that defines which graph I want to look at.  You would of course have to loop through the graphs as you add data. 
    Cheers,
    jigg
    CTA, CLA
    teststandhelp.com
    ~Will work for kudos and/or BBQ~
    Attachments:
    12PlotStack.zip ‏12 KB

  • With Firefox 6, is there any way to allow cookies for the browsing only and then erase cookies when you close the browser?

    With Firefox 6, is there any way to allow cookies for the browsing session and then automatically erase cookies when the browser is closed? On older versions this option was available.

    For more help, see the '''[[Tabbed browsing]]''' page.

  • Any way to set color for value in chart and still filter out values (but retain colors)?

    Is there any way that I can hard code a color into a chart and still filter out values?
    I have 5 divisions, each with a specific color.  I have put them into a stacked column chart and it looks fine.  My issue arises when I try to filter out some of the divisions.  The colors do not stay with the specified divisions.
    Ex.)
      Div 1 = Red
      Div 2 = Green
      Div 3 = Black
    When I filter out Div 1, this is what I see:
    Div 2 = Red
    Div 3 = Green
    I have tried standard delivered filter panel, and check-boxes using CHART_1.setDataSelection( )
    It seems like the color hard coding in the "additional" properties of the chart are not tied to the value, but are determined by sort order.  Any help is greatly appreciated

    Hi,
    There is one Possibility bu not By chart .
    It will look like chart but will use Text box .
    Lets say you have 5 Divisions & 3 Key figures .
    Then You need 5 * 3 = 15 Text box .
    Arrange them in 5 columns and 3 rows type of view .
    now .
    set fix width for all .
    set the height & position by coding
    You need to set this type of code for filter selection also .

  • Problem inserting auto-sequence for PK value using trigger - ORA-02287

    I have a query where the sub-query is working. I created a table to receive the results of the query. I created a Sequence:
    CREATE SEQUENCE SEQ_RPT_H2_LOOPS
    MINVALUE 1
    START WITH 1
    INCREMENT BY 1
    NOMAXVALUE;
    Then I created a trigger:
    CREATE OR REPLACE TRIGGER TRG_RPT_H2_LOOPS
    BEFORE INSERT ON RPT_H2_LOOPS
    FOR EACH ROW
    BEGIN
    SELECT SEQ_RPT_H2_LOOPS.NEXTVAL INTO :NEW.RECORD_ID FROM DUAL;
    END;
    And here is the Insert query.
    accept month_year;
    accept prior_month_year;
    insert into rpt_h2_loops (
         RECORD_ID,
         MKT_CODE,
         MKT_NAME,
         ECCKT,
         VENDOR_ID,
         ECCKT_VENDOR_ID,
         OCN,
         FAC_TYP,
         ALOC,
         ZLOC,
         STATE,
         OCN_STATE,
         OCN_STATE_COLO,
         SRVC_TYP,
         CUR_PERIOD,
         PRIOR_PERIOD,
         TIME_STAMP )
    select seq_rpt_h2_loops.nextval
    ,substr(r.sub_acct,4,3)
    ,m.market
    ,rr.ckt
    ,rr.vendor_id
    ,rr.ckt||rr.vendor_id
    ,rr.ocn
    ,rr.srvc_typ
    ,'N/A'
    ,rr.zloc
    ,rr.st_cd
    ,rr.ocn||rr.st_cd
    ,rr.ocn||rr.st_cd||rr.zloc
    ,rr.srvc_typ
    ,'&month_year'
    ,'&prior_month_year'
    ,sysdate
    from rco.rate_route rr
    ,rco.cogs_resource r
    ,rco.cogs_mkt m
    where rr.cvbi_key = r.cvbi_key
    and     m.subacct = r.sub_acct
    and     to_char(rr.period, 'mm/yyyy') = '&month_year'
    and     to_char(r.period, 'mm/yyyy') = '&month_year'
    and     rr.srvc_typ = 'CUNE'
    group by    substr(r.sub_acct,4,3)
    ,m.market
    ,rr.ckt
    ,rr.vendor_id
    ,rr.ckt||rr.vendor_id
    ,rr.ocn
    ,rr.srvc_typ
    ,rr.zloc
    ,rr.st_cd
    ,rr.ocn||rr.st_cd
    ,rr.ocn||rr.st_cd||rr.zloc
    );The problem is that I am getting a ORA-02287: sequence number not allowed here on the NEXTVAL keyword.
    The sequence and trigger compiled without problem. I just can't seem to insert that value into the query. Any help would be appreciated.

    you are defeating the purpose of trigger which is before insert so just rewrite the query and remove the column for which value will be inserted using the created sequence and your code will work.
    Regards,
    Vikas Kumar

  • FM9: Any way to auto-close the insert-variable window?

    Is there any way to have the FM9 variable window automatically close after one selects a variable using the Enter key? I'm finding it cumbersome after calling it up via key commands to have to pick up the mouse and click somewhere just to close the window, or "fly" back into the side panel.

    after youve called the contact and it opens with their name again just tap cancel on top right of screen and it puts you back to the first person in your contacts list.
    its the only way ive found out how to close the cotacts name.

  • HT4539 Is there any way to auto-start the Apple mail app?

    Our company offers a 7/24 service where a user can leave a voice mail in our system and our mail server will send an urgent mail message to the iPhone of the employee on duty so it can be handled in a timely manner. The problem we are having is that if someone turns off their phone and starts it again (or if the user opens the running apps window and shuts down the mail app), the users are not getting those urgent emails.
    While I understand having an auto-starting app would be undesirable, since every developer might start activating that feature, does Apple iOS6 have any way to tell the mail app to restart on iPhone boot? We have a few people using other smartphones with a competing O/S that sounds similar to "asteroid" ;-) and the mail appears to be always operational, even if you shut down the app.

    And be sure to set up Notifications for mail so the phone will beep, buzz, flash, whatever when a message comes in.
    One issue though (discussed elsewhere): the phone will only Notify once. If you didn't hear or see it, there won't be any further warning (unlike, say, Blackberry's flashing LED). You're gonna have to grab the phone and at least bring up the lock screen to see if there are any notifications queued up.

  • Is there any way to not wait for a subVI to output so that the background loop can continue (until the output exists)?

    hello everyone,
    I am in a loop but want to modify an element in that loop. This modification takes time, but i cannot have the loop stop while it is being changed or else the buffer overflows and crashes the computer.
    Is there any way to make the output null until the subVI finishes and actually gives the desired output? This way the loop could continue until the subVI's output is ready.

    Inside the subVI, you can set a condition, for example, if data is not given, set the output to some kind of value (NaN is good for numeric), if data is present, just take it out. But be sure the subVI has no loop to get data, but check data only once. If you need a loop to get data, you'll have to put it in paralell with the main loop.
    Hope this helps

  • ACS 5.3 Dashboard - Any way to create Dashboard for all users?

    I'm at the point of setting up admin access for engineers needing to have insight into the operations and status of our ACS 5.3 systems.
    I'm curious if there's any way to create a Dashboard that can be applied to all admin user accounts? (perhaps a custom role?)
    I've been able to customize the dashboard for my own account to show what is most relevant, but am unable to figure out how to apply this layout and setup to all other users.
    Basically, I have a number of folks that need to see this data, but that I can't exactly count on to setup their own dashboards to show the important details.  If there were some way to build a tab/dashboard/portlet, etc (whatver it may be) and have it apply to all users, that would save me TONS of work so that I don't have to login to each person's account and set things up for them.
    For example, I want to have all users see a tab/dashboard that shows the applet "Live Authentications", but with the protocol already configured to display TACACS vs the default which is RADIUS.
    Any thoughts?
    -Chris

    Chris,
    I see you are looking for read-only access to Dashboard. Currently there is no way to force all Admins to use same Dashboard and all admins will have full control of the Dashboard.
    Regards,
    ~JG
    Do rate helpful posts!

Maybe you are looking for