Any way to fix a corrupt disk without a SL disc?

Ran Disc Utility today and got this:
The volume X452 was found corrupt and needs to be repaired.
Error: This disk needs to be repaired. Start up your computer with another disk (such as your Mac OS X installation disc), and then use Disk Utility to repair this disk.
My SL disc is a 15 hr drive away, anyway to fix this?

Sorry, but unless you can boot from another volume you cannot repair the drive. You do not require the SL installer disc, but you do need to boot from another SL system. Or, if your computer has a Firewire port then you could connect it to another Intel Mac running SL and use Disk Utility from the other computer to repair your drive.
Now, that said you can attempt a local fix depending on what the problem is. Here's how:
Boot into single-user mode. After startup is completed you will be in command line mode and should see a prompt with a cursor positioned after it. At the prompt enter the following then press RETURN:
/sbin/fsck -fy
If you receive a message that says "*** FILE SYSTEM WAS MODIFIED ***" then re-run the command until you receive a message that says "** The volume (nameofvolume) appears to be OK." If you re-run the command more than seven times and do not get the OK message, then the drive cannot be repaired this way.
If you were successful then enter:
reboot
and press RETURN to restart the computer.
Now the above cannot effect the repairs that Disk Utility can when booted from another drive or computer. But it can fix some problems. And, you should consider installing AppleJack - CNet Downloads or MacUpdate.

Similar Messages

  • Any way to repair a corrupt ipod without losing data?

    I've only had my ipod nano a few months and apparently for some reason it has now corrupted, meaning that I have to restore it and thereby lose all my songs. Does anyone know of any way that I can fix this problem without losing the data? Or can anyone recommend a service provider that can help?

    You don't say which OS your iPod was formatted on. It may not be a hopeless situation if the iPod is recognized as a removeable drive in (say) Windows Explorer.

  • Any way to fix a corrupted CurrentVersion.fcpproject file?

    I was editing a project and FCPX crashed.  So I closed it out and tried reopening.  It kept crashing on "Loading Compressor Support".  The error report states that only Thread 0 is crashing.  I've pasted the relevent parts of the error report in case someone wants to read it over but it seems many other have already done that in other threads.
    Anyhow, I have narrowed the problem down to the "CurrentVersion.fcpproject" file is corrupted in the Project I was working on when FCPX crashed out.  If you go to your Final Cut Projects > YOUR EVENT NAME > YOUR PROJECT NAME > CurrentVersion.fcpproject     this is the file that is causing the crash on startup.  Luckily I had this file backed up from about a week ago so worst case scenario I'm not completely screwed.  I replaced this file with the older one and now FCPX opens normally (i've just lost all that work since the backed up file).
    FCPX is the first version of FCP I've ever worked with.  So I am wondering if there is any way possible to repair this damaged project file.  Thank you for your help.
    Crashed Thread:  0  Dispatch queue: com.apple.main-thread
    Exception Type:  EXC_CRASH (SIGABRT)
    Exception Codes: 0x0000000000000000, 0x0000000000000000
    Application Specific Information:
    objc[720]: garbage collection is OFF
    *** Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '-[__NSCFString isDrawingToScreen]: unrecognized selector sent to instance 0x1323a2340'
    *** First throw call stack:
        0   CoreFoundation                      0x00007fff8ac5f286 __exceptionPreprocess + 198
        1   libobjc.A.dylib                     0x00007fff8a0f5d5e objc_exception_throw + 43
        2   CoreFoundation                      0x00007fff8aceb4ce -[NSObject doesNotRecognizeSelector:] + 190
        3   CoreFoundation                      0x00007fff8ac4c133 ___forwarding___ + 371
        4   CoreFoundation                      0x00007fff8ac4bf48 _CF_forwarding_prep_0 + 232
        5   AppKit                              0x00007fff8b64c436 -[NSView visibleRect] + 67
        6   AppKit                              0x00007fff8b64b783 -[NSView setNeedsDisplayInRect:] + 209
        7   AppKit                              0x00007fff8b67df42 -[NSView setNeedsDisplay:] + 80
        8   AppKit                              0x00007fff8b7e8914 -[NSPopUpButtonCell setTitle:] + 425
        9   AppKit                              0x00007fff8b7e9269 -[NSPopUpButtonCell setPullsDown:] + 182
        10  AppKit                              0x00007fff8b7e7a7e -[NSPopUpButton initWithFrame:pullsDown:] + 107
        11  AppKit                              0x00007fff8b7e7a0d -[NSPopUpButton initWithFrame:] + 59
        12  AppKit                              0x00007fff8b756f8b -[NSView init] + 63
        13  AppKit                              0x00007fff8b7e53a4 -[NSSpellChecker init] + 260
        14  AppKit                              0x00007fff8b7e5227 +[NSSpellChecker sharedSpellChecker] + 68
        15  AppKit                              0x00007fff8b7e514e -[NSTextView checkTextInRange:types:options:] + 937
        16  AppKit                              0x00007fff8b7e4d4e -[NSTextView _performScheduledTextChecking] + 413
        17  libdispatch.dylib                   0x00007fff889f52b6 _dispatch_source_invoke + 635
        18  libdispatch.dylib                   0x00007fff889f1f77 _dispatch_queue_invoke + 71
        19  libdispatch.dylib                   0x00007fff889f26f7 _dispatch_main_queue_callback_4CF + 257
        20  CoreFoundation                      0x00007fff8abf44dc __CFRunLoopRun + 1724
        21  CoreFoundation                      0x00007fff8abf3ae6 CFRunLoopRunSpecific + 230
        22  HIToolbox                           0x00007fff8dbb23d3 RunCurrentEventLoopInMode + 277
        23  HIToolbox                           0x00007fff8dbb963d ReceiveNextEventCommon + 355
        24  HIToolbox                           0x00007fff8dbb94ca BlockUntilNextEventMatchingListInMode + 62
        25  AppKit                              0x00007fff8b6123f1 _DPSNextEvent + 659
        26  AppKit                              0x00007fff8b611cf5 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 135
        27  AppKit                              0x00007fff8b60e62d -[NSApplication run] + 470
        28  ProKit                              0x00000001002f93c6 NSProApplicationMain + 387
        29  Final Cut Pro                       0x0000000100001478 start + 52
        30  ???                                 0x0000000000000002 0x0 + 2
    terminate called throwing an exception
    abort() called
    Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
    0   libsystem_kernel.dylib            0x00007fff8caffce2 __pthread_kill + 10
    1   libsystem_c.dylib                 0x00007fff85a4b7d2 pthread_kill + 95
    2   libsystem_c.dylib                 0x00007fff85a3ca7a abort + 143
    3   libc++abi.dylib                   0x00007fff85ec77bc abort_message + 214
    4   libc++abi.dylib                   0x00007fff85ec4fcf default_terminate() + 28
    5   libobjc.A.dylib                   0x00007fff8a0f61b9 _objc_terminate + 94
    6   libc++abi.dylib                   0x00007fff85ec5001 safe_handler_caller(void (*)()) + 11
    7   libc++abi.dylib                   0x00007fff85ec505c std::terminate() + 16
    8   libc++abi.dylib                   0x00007fff85ec6152 __cxa_throw + 114
    9   libobjc.A.dylib                   0x00007fff8a0f5e7a objc_exception_throw + 327
    10  com.apple.CoreFoundation          0x00007fff8aceb4ce -[NSObject doesNotRecognizeSelector:] + 190
    11  com.apple.CoreFoundation          0x00007fff8ac4c133 ___forwarding___ + 371
    12  com.apple.CoreFoundation          0x00007fff8ac4bf48 _CF_forwarding_prep_0 + 232
    13  com.apple.AppKit                  0x00007fff8b64c436 -[NSView visibleRect] + 67
    14  com.apple.AppKit                  0x00007fff8b64b783 -[NSView setNeedsDisplayInRect:] + 209
    15  com.apple.AppKit                  0x00007fff8b67df42 -[NSView setNeedsDisplay:] + 80
    16  com.apple.AppKit                  0x00007fff8b7e8914 -[NSPopUpButtonCell setTitle:] + 425
    17  com.apple.AppKit                  0x00007fff8b7e9269 -[NSPopUpButtonCell setPullsDown:] + 182
    18  com.apple.AppKit                  0x00007fff8b7e7a7e -[NSPopUpButton initWithFrame:pullsDown:] + 107
    19  com.apple.AppKit                  0x00007fff8b7e7a0d -[NSPopUpButton initWithFrame:] + 59
    20  com.apple.AppKit                  0x00007fff8b756f8b -[NSView init] + 63
    21  com.apple.AppKit                  0x00007fff8b7e53a4 -[NSSpellChecker init] + 260
    22  com.apple.AppKit                  0x00007fff8b7e5227 +[NSSpellChecker sharedSpellChecker] + 68
    23  com.apple.AppKit                  0x00007fff8b7e514e -[NSTextView checkTextInRange:types:options:] + 937
    24  com.apple.AppKit                  0x00007fff8b7e4d4e -[NSTextView _performScheduledTextChecking] + 413
    25  libdispatch.dylib                 0x00007fff889f52b6 _dispatch_source_invoke + 635
    26  libdispatch.dylib                 0x00007fff889f1f77 _dispatch_queue_invoke + 71
    27  libdispatch.dylib                 0x00007fff889f26f7 _dispatch_main_queue_callback_4CF + 257
    28  com.apple.CoreFoundation          0x00007fff8abf44dc __CFRunLoopRun + 1724
    29  com.apple.CoreFoundation          0x00007fff8abf3ae6 CFRunLoopRunSpecific + 230
    30  com.apple.HIToolbox               0x00007fff8dbb23d3 RunCurrentEventLoopInMode + 277
    31  com.apple.HIToolbox               0x00007fff8dbb963d ReceiveNextEventCommon + 355
    32  com.apple.HIToolbox               0x00007fff8dbb94ca BlockUntilNextEventMatchingListInMode + 62
    33  com.apple.AppKit                  0x00007fff8b6123f1 _DPSNextEvent + 659
    34  com.apple.AppKit                  0x00007fff8b611cf5 -[NSApplication nextEventMatchingMask:untilDate:inMode:dequeue:] + 135
    35  com.apple.AppKit                  0x00007fff8b60e62d -[NSApplication run] + 470
    36  com.apple.prokit                  0x00000001002f93c6 NSProApplicationMain + 387
    37  com.apple.FinalCut                0x0000000100001478 start + 52

    Sorry, but unless you can boot from another volume you cannot repair the drive. You do not require the SL installer disc, but you do need to boot from another SL system. Or, if your computer has a Firewire port then you could connect it to another Intel Mac running SL and use Disk Utility from the other computer to repair your drive.
    Now, that said you can attempt a local fix depending on what the problem is. Here's how:
    Boot into single-user mode. After startup is completed you will be in command line mode and should see a prompt with a cursor positioned after it. At the prompt enter the following then press RETURN:
    /sbin/fsck -fy
    If you receive a message that says "*** FILE SYSTEM WAS MODIFIED ***" then re-run the command until you receive a message that says "** The volume (nameofvolume) appears to be OK." If you re-run the command more than seven times and do not get the OK message, then the drive cannot be repaired this way.
    If you were successful then enter:
    reboot
    and press RETURN to restart the computer.
    Now the above cannot effect the repairs that Disk Utility can when booted from another drive or computer. But it can fix some problems. And, you should consider installing AppleJack - CNet Downloads or MacUpdate.

  • Is there ANY way to fix a corrupt InDesign file??

    My computer crashed last night and the InDesign file i was working on seems to have been corrupted.
    When i try to open the file i get the following message:
    "Adobe Indesign automatic recovery failed the last time it tried to open the document"
    when i click yes to begin recovery, InDesign crashes. i've deleted the prefs and cache files and restarted, but the problem persists.
    I can open other InDesign files, so the problem seems to be with this particular one.
    is there any fix at all??!??! this is a 60+ page document and i am on deadline.
    p.s. my backup copy seems to have gotten corrupted in the process as well, so i am really concerned.
    OS X 10.5.1
    InDesign 5.0.2
    thanks for any assistance.
    gregg

    Ok, here's what's next.
    Have you trashed your InD prefs? This might be a good place to start. You'll have to search for the specs on doing this, I don't have that info handy. But it's a good place to start.
    If that doesn't help, let's see if there's something in your OS that's causing the crash -
    Do a "safe boot" - restart, hold down the shift key during startup till you see the words "Safe Boot" on the startup screen. This will disable any non-apple extensions and fonts. I'm starting to think you've got a bad font.
    Now, in SafeBoot mode, try to open the file. Try to save the file. Try to Export and INX. If all of this works better than during the regular startup then we've hit on something. If a safeboot is helpful, consider an archive and install of the OS. Could be something got corrupted.
    If the safeboot doesn't help, here's what's next:
    You might try working with the file in under a new user account that hasn't had a million drivers and extension added to it. Here's a rough outline of the steps I have in mind (though you'll have to figure this out yourself)
    First, set the permissions for all the job files to Read-Write for all users. If you don't do this, the new-user won't be able to open the files.
    Create a new user account, call it "Clean Account". Reboot into the clean account.
    Now try to work with the job. Any luck? Missing fonts? Move the job fonts into the clean user account. Are you crashing now? Bingo - it's a bad font. Are you in better shape now in the clean user? Bingo - it's some driver, haxie or extension.
    Maybe you're due for an "Archive and Install" from the original system disks, or even a "Clean Install" if you've got a free weekend to rebuild your environment.
    I guess there's also re-install the app, though I've never had to do that. But it's harmless to try.
    these are just ideas - something is wrong - corrupted - bad. Could be in the OS, InD, a bad font, even a bad placed EPS (you don't use EPS files, do you?). So I'm just thinking out loud. These are all good trouble shooing options.
    And check the disk with a utility. You didn't say that you'd done that.
    Best,
    SilverDollar

  • I updated to maverick, and maybe it's a coincidence but my left shift key doesn't work unless i really press it down.  Is there any way to fix this without bringing it into the Genius Bar?

    i updated to maverick, and maybe it's a coincidence but my left shift key doesn't work unless i really press it down.  Is there any way to fix this without bringing it into the Genius Bar?

    Plugins usually are installed externally to Firefox. However, you can disable them in Firefox so that Firefox does not use them.
    SearchReset is supposed to automate the task of resetting certain preferences, but you still can edit them manually if necessary.
    '''''Address Bar Search'''''
    (1) In a new tab, type or paste '''about:config''' in the address bar and press Enter. Click the button promising to be careful.
    (2) In the filter box, type or paste '''keyword''' and pause while the list is filtered
    (3) Right-click '''keyword.URL''' and choose Reset. This should restore Google as the default for address bar search.
    Does that work?
    '''''Search Box'''''
    Usually it works to choose your preferred search engine from the drop-down. To remove an unwanted search engine plugin, usually the Manage Search Engines... choice at the bottom of the drop-down takes care of it.
    Do either of those work?
    There might be another way to hijack that search box; I think some of the other frequent responders probably are more familiar with it than I am.

  • I changed my passcode, and then forgot it. Is there any way to fix this without restoring it?

    I changed my passcode, and then forgot it. Is there any way to fix this without restoring it?

    Your options are to remember the passcode or restore it
    On the plus side if you used iCloud or synced with iTunes theres a good chance you will get most of your data back after restoring

  • TS1702 I accidentally bought the iPhone app on my my iPad. Any way to fix this without buying it twice?

    I accidentally bought the iPhone app on my my iPad. Any way to fix this without buying it twice?

    Officially no,  all sales are final.
    If you contact itunes support and whine they may give a once in a lifetime refund.

  • Since installing Yosemite, my MacBook Pro has become slower.  Is there any way to fix this problem?

    Ever since I installed OS X Yosemite on my mid 2012 MacBook Pro, it has started becoming slower and slower and glitching out.  Is there any way to fix this?  Here is my diagnostics:
    Problem description:
    My Mac is rather slow.  It started happening after I installed OS X Yosemite
    EtreCheck version: 2.0.11 (98)
    Report generated November 10, 2014 at 7:32:23 PM EST
    Hardware Information: ℹ️
      MacBook Pro (13-inch, Mid 2012) (Verified)
      MacBook Pro - model: MacBookPro9,2
      1 2.5 GHz Intel Core i5 CPU: 2-core
      4 GB RAM Upgradeable
      BANK 0/DIMM0
      2 GB DDR3 1600 MHz ok
      BANK 1/DIMM0
      2 GB DDR3 1600 MHz ok
      Bluetooth: Good - Handoff/Airdrop2 supported
      Wireless:  en1: 802.11 a/b/g/n
    Video Information: ℹ️
      Intel HD Graphics 4000 -
      Color LCD 1280 x 800
    System Software: ℹ️
      OS X 10.10 (14A389) - Uptime: 0:36:19
    Disk Information: ℹ️
      APPLE HDD HTS545050A7E362 disk0 : (500.11 GB)
      S.M.A.R.T. Status: Verified
      EFI (disk0s1) <not mounted> : 210 MB
      Recovery HD (disk0s3) <not mounted>  [Recovery]: 650 MB
      Macintosh HD (disk1) /  [Startup]: 496.14 GB (325.60 GB free)
      Encrypted AES-XTS Unlocked
      Core Storage: disk0s2 499.25 GB Online
      MATSHITADVD-R   UJ-8A8 
    USB Information: ℹ️
      Apple Inc. FaceTime HD Camera (Built-in)
      Apple Inc. BRCM20702 Hub
      Apple Inc. Bluetooth USB Host Controller
      Apple Inc. Apple Internal Keyboard / Trackpad
      Apple Computer, Inc. IR Receiver
    Thunderbolt Information: ℹ️
      Apple Inc. thunderbolt_bus
    Gatekeeper: ℹ️
      Mac App Store and identified developers
    Kernel Extensions: ℹ️
      /Library/Application Support/Avast/components/fileshield/unsigned
      [loaded] com.avast.AvastFileShield (2.1.0 - SDK 10.9) Support
      /Library/Application Support/Avast/components/proxy/unsigned
      [loaded] com.avast.PacketForwarder (1.4 - SDK 10.9) Support
      /Library/Extensions
      [loaded] com.logmein.hamachi (1.0.0 - SDK 10.9) Support
      /System/Library/Extensions
      [not loaded] com.paceap.kext.pacesupport.master (5.9.1 - SDK 10.6) Support
      /System/Library/Extensions/PACESupportFamily.kext/Contents/PlugIns
      [not loaded] com.paceap.kext.pacesupport.leopard (5.9.1 - SDK 10.4) Support
      [not loaded] com.paceap.kext.pacesupport.panther (5.9.1 - SDK 10.-1) Support
      [loaded] com.paceap.kext.pacesupport.snowleopard (5.9.1 - SDK 10.6) Support
      [not loaded] com.paceap.kext.pacesupport.tiger (5.9.1 - SDK 10.4) Support
    Launch Agents: ℹ️
      [not loaded] com.adobe.AAM.Updater-1.0.plist Support
      [not loaded] com.adobe.AdobeCreativeCloud.plist Support
      [not loaded] com.avast.userinit.plist Support
      [running] com.logmein.hamachimb.plist Support
      [loaded] com.oracle.java.Java-Updater.plist Support
    Launch Daemons: ℹ️
      [loaded] com.adobe.fpsaud.plist Support
      [loaded] com.avast.init.plist Support
      [loaded] com.avast.uninstall.plist Support
      [loaded] com.avast.update.plist Support
      [running] com.logmein.hamachi.plist Support
      [loaded] com.macpaw.CleanMyMac2.Agent.plist Support
      [loaded] com.microsoft.office.licensing.helper.plist Support
      [loaded] com.oracle.java.Helper-Tool.plist Support
      [running] com.paceap.eden.licensed.plist Support
      [not loaded] org.eyebeam.SelfControl.plist Support
      [loaded] PACESupport.plist Support
    User Launch Agents: ℹ️
      [loaded] com.adobe.AAM.Updater-1.0.plist Support
      [not loaded] com.adobe.ARM.[...].plist Support
      [invalid?] com.avast.home.userinit.plist Support
      [not loaded] com.google.keystone.agent.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.scheduledScan.plist Support
      [loaded] com.macpaw.CleanMyMac2Helper.trashWatcher.plist Support
      [running] com.spotify.webhelper.plist Support
      [not loaded] com.valvesoftware.steamclean.plist Support
    User Login Items: ℹ️
      iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
      uTorrent UNKNOWN (missing value)
      AdobeResourceSynchronizer ApplicationHidden (/Applications/Adobe Reader.app/Contents/Support/AdobeResourceSynchronizer.app)
    Internet Plug-ins: ℹ️
      AdobeAAMDetect: Version: AdobeAAMDetect 2.0.0.0 - SDK 10.7 Support
      FlashPlayer-10.6: Version: 15.0.0.189 - SDK 10.6 Support
      Default Browser: Version: 600 - SDK 10.10
      AdobePDFViewerNPAPI: Version: 11.0.09 - SDK 10.6 Support
      AdobePDFViewer: Version: 11.0.09 - SDK 10.6 Support
      Flash Player: Version: 15.0.0.189 - SDK 10.6 Support
      QuickTime Plugin: Version: 7.7.3
      SharePointBrowserPlugin: Version: 14.4.5 - SDK 10.6 Support
      Silverlight: Version: 5.1.20913.0 - SDK 10.6 Support
      DirectorShockwave: Version: 12.0.6r147 - SDK 10.6 Support
      JavaAppletPlugin: Version: Java 8 Update 20 Check version
    User Internet Plug-ins: ℹ️
      Unity Web Player: Version: UnityPlayer version 2.6.1f3 Support
      NPRoblox: Version: 1, 2, 8, 25 - SDK 10.9 Support
    Safari Extensions: ℹ️
      Adblock Plus
      Searchme
    3rd Party Preference Panes: ℹ️
      Flash Player  Support
      Java  Support
    Time Machine: ℹ️
      Time Machine not configured!
    Top Processes by CPU: ℹ️
          8% mds
          4% WindowServer
          0% fontd
          0% launchd
          0% com.avast.daemon
    Top Processes by Memory: ℹ️
      163 MB Safari
      120 MB mds_stores
      112 MB com.avast.daemon
      86 MB Finder
      64 MB com.apple.WebKit.WebContent
    Virtual Memory Information: ℹ️
      398 MB Free RAM
      1.75 GB Active RAM
      1.19 GB Inactive RAM
      753 MB Wired RAM
      4.25 GB Page-ins
      1 MB Page-outs

    1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
    Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
    2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
    There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
    3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
    You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
    In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
    You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
    Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
    4. Here's a summary of what you need to do, if you choose to proceed:
    ☞ Copy a line of text in this window to the Clipboard.
    ☞ Paste into the window of another application.
    ☞ Wait for the test to run. It usually takes a few minutes.
    ☞ Paste the results, which will have been copied automatically, back into a reply on this page.
    The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
    5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
    6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
    7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
    Triple-click anywhere in the line of text below on this page to select it:
    PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB ' com.adobe.AAM.Updater-1.0 com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.FolderActions.folders com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.SafariNotificationAgent com.apple.usbmuxd com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper ' ' 879294308 3627668074 1083382502 1274181950 1855907737 464843899 3694147963 1417519526 1233118628 2456546649 2806998573 2636415542 842973933 3301885676 891055588 998894468 695903914 1443423563 ' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' sub(/ :/,"");{ print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\\([0-9]+\\)\\(.+\\)/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+\)$//g;p ' '/\.appex\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test osascript\ -e sysctl\ -n pluginkit );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|Roame|SMC:|suhel| VALI|ver-r|xpma' -o -o -k Sender fseventsd -k Message Req SL -o -k Sender Req launchd -k Message Req de: " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 38 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 35 49 61 51;D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 39 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 26 48 49 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    8. Launch the built-in Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
    Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
    9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
    exec bash
    and press return. Then paste the script again.
    10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return  three times at the password prompt. Again, the script will still run.
    If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
    11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
    [Process completed]
    to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
    12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
    At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
    If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
    13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
    14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
    Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

  • Is there any way to create a HTTP_AAE Receiver without a path in NW PO 7.31

    Hi ,
    Does anyone know how to create a HTTP_AAE Receiver without a path??
    We are in a phase of migrating Interfaces from PI 7.1 to PO 7.31(Java Only).
    For one of the Interface in PI 7.1 there is a RFC Destination for vendor communication through HTTPS connectivity  :
    TargetHost: IP Address
    Post: value
    Path Prefix: Blank
    During migration  requirment is to keep the Path field BLANK of the Communication Channel,however since  PO has mandatory path field   a "/" is been provided, because of which data post fails.
    PI:  https://IP:9443
    PO:  https://IP:9443/  (Since Path Prefix is mandatory)
    As per my understanding The data is supposted to be posted directly to the IP (https://IP:9443) however it is getting posted to (https://IP:9443/) where the service is not available. For Reference attached relevant screenshots.
    Is there any way to  create a HTTP_AAE Receiver without a path. Need ardent support and suggestions
    regarding this.
    Regards
    Riju

    Hi,
    For Service auto- PO from PR, you need to activate Automatic Purchase order creation for Service requisitions in ML91 t.code.
    Note:
    For material :automatic PO creation from PR, follow the steps.
    1) Material Master purchasing view tick automatic PO check box
    2) Vendor Master purchasing view tick automatic PO check box.
    3) Maintain Source list for Vendor & Material.(ME01)
    4) Maintain Purchase Info Record.(ME11)
    5) Create a Purchase Requisition.(ME51)
    6) Use T.Code: ME59 & execute for PR for vendor, you will be able to create automatic PO.
    During creation of PR , select check box of Source Determination in the 1st screen of ME51
    Ensure that Purchase Info Record should be there.
    If you have more than one vendor then fixes only one vendor in source list.
    Regards,
    Biju K

  • Any way to open new browser window without using image maps?

    Is there any way to open new browser window without using image maps? My code works fine in Firefox, but not in IE. There are 2 problems in IE: 1st is that the thumbnail images move up within their own borders & 2nd that when you click on an image it does open up a new browser window, but also redirects to the index page (in this case it's just a placeholder index page - the new one I've called index_new.html for the time being).
    Here is the link:
    http://www.susieharperdesigns.com/gallery_beads.html
    Any help is greatly appreciated.

    Your missing a value on the HREF.  In your code you have this:
    <area shape="rect" coords="-24,-9,106,144" href=" " onclick="MM_openBrWindow('gallery_bead1.html','','width=255,height=360')" />
    </map></div>
    and it should be this:
    <area shape="rect" coords="-24,-9,106,144" href="javascript:void()" onclick="MM_openBrWindow('gallery_bead1.html','','width=255,height=360')" />
    </map></div>
    If you fix the code on all your beads, it should work.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb
    http://alt-web.blogspot.com

  • Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz  The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1:  Is there any way of fixing this? I've tried

    Concerning: VGA monitors using an Aluminum Powerbook G4 PowerPC 2004 15"-screen 1.5Ghz
    The DVI (converted to VGA) video output stopped working on this computer after 9 years of service. This raises question 1:
    Is there any way of fixing this? I've tried the usual: triple checked all vga cables & devices through trial & error. Bought a new DVI-VGA adapter. Reset PRAM, PMU, etc. Nothing works. Something is probably damaged, because my KVM switch was not working unless I hot-reseated the vga cable into it, leading to this DVI port, and that is pretty rough stuff.
    Question 2 (related):
    This dovetails into this: Can I drive a VGA monitor with the s-video output port on this computer. It would take an s-video (male)-to-15-pin-VGA adapter. Has anyone does this? So far, I haven't even found the adapter mentioned anywhere.
    Thanks for reading this.
    el7

    Thanks for the useful feedback, Knucklesmac. I agree. I must have blown something on the logic board -- because I had a faulty old KVM switch that would not switch between computers without some nasty hot-plugging/unplugging the VGA video cables. (wince!). It's like when Dizzy Dean ruined his arm because a line drive hit him in the foot and he readjusted his mechanics around the injury. I take the blame because this has been a great computer, and does not deserve any blame.
    If it will help anyone else reading this thread, C2G (née Cables to Go) has some interesting ideas for still getting external video out of this computer:
    -USB-to-VGA
    http://www.cablestogo.com/product/30545
    -Convert s-video or composite video signals to high resolution VGA
    http://www.cablestogo.com/product/40971
    The price range is $75-$85, which doesn't make horse sense to me for such an old computer -- which has a lot of life in it anyway, because its own 15" monitor is not chopped liver.
    el7

  • My macbook pro charger will not charge my mac. The charger is in great condition, but it will not register as charging and it will not charge my computer. is there any way to fix this?

    My computer has stopped recieving charge. The charger is in great condition, but it will not register, nor charge my computer. I do not know if its my mac or the charger. Is there any way to fix this?

    Do you have another charger to test with?
    It is very possible that somehow the wire might have gotten bent without your knowledge and that is why it is not working.
    If you have an Apple store near you, you might want to set up a genius appointment so that they can test it for you.

  • Is there any way to fix the window screen grab in 10.5?

    For whatever reason, the window capture function (CMD-SHIFT-4, then SPACE) in OS X 10.5 now insists on including the shadow of the window being captured. Given how much documentation I write this is a HUGE setback for me; what used to take a few seconds now takes several minutes since I now have to edit every image in Photoshop to remove the shadow, or use CMD-SHIFT-4 without the SPACE and hope my marquee is accurate.
    Is there any way to fix this "improvement" (ahem) in 10.5?
    <Edited by Moderator>

    Here is the problem.
    Let's say you have a window that's sized to, say, 400x300, and you want to grab that window. You hit SHIFT-CMD-4, then tap SPACE, then click on the window.
    Up until OS X 10.5, you would get an image file on your desktop that, when opened, contained a 400x300 graphic of that window.
    Starting with 10.5, when you open that image you get an image that's LARGER than 400x300 and contains the window plus the shadow that OS X puts around it, with transparency.
    Yes, they look great when you post them in documents with any color background. But that's only useful if you have an actual design-need for a drop shadow. Believe it or not, there are countless instances where a drop shadow is NOT needed or wanted. This means that I have to edit every file to remove the drop shadow which is a waste of time. Before Apple forced the drop shadow, I had the choice of whether to include a drop shadow or not when I work with the file in InDesign, and the drop shadow would work beautifully in any color background.

  • Is there any way to fix it so my computer will stop "rebuffering" when I preview a song on itunes.

    When I preview a song on itunes it will play for only a couple of seconds and then it "rebuffers".  It does this constantly.  I do not have this issue when I preview a song on Amazon or if I listen to Pandora radio.  Is there any way to fix this?
    Thank you.

    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
    *Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
    3. Click the First Aid tab.
    4. Select your Mac OS X volume.
    5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
    (Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
    If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
    If that doesn't work we may have to reinstall AW6...

  • When i duplicate an object, it moves it far away from where my original object is as soon as i move it. is there any way to fix this?

    when i duplicate an object in numbers, it moves it far away from where my original object is as soon as i move it. is there any way to fix this? thanks

    Hi Rick,
    Your initial duplicate should be offset by one grid unit to the right and below the location of the original. If you move that duplicate by dragging it, without first de-selecting it, then reselecting it, the place you put it will determine the offset for subsequent duplicates (from the same original or from the copy).
    Example:
    Initial object and first duplicate:
    Pressing shift-up arrow would move the duplicate up to align with the top of the original. Pressing shift-left arrow would then place the duplicate directly in front of the original.
    Without being deselected, the duplicate was dragged to the position shown:
    Command-D was then pressed to duplicate the first copy:
    The duplicate appeared in this position
    Regards,
    Barry

Maybe you are looking for