Any way to record audio?

Hello,
Is there a way to record audio using iSight microphone with Quicktime or any other recording software? Weather saved in a mp3 of aiff, or.mov??
Michel

Hi
yes in Quicktime Pro click on file/new audio recording.
Or have a look at Audio-in http://www.versiontracker.com/dyn/moreinfo/macosx/15962 when run change audio device to 0xa27000401af2f
Tont

Similar Messages

Any way to force audio to stay on HDMI?

Any way to force audio to stay on HDMI and not go back to Internal Speakers once the a/v receiver is off?
To explain what is happening in more detail I have a mac mini hooked up to my TV and my computer monitor using an HDMI Distribution Amplifier. This way I can use the mac on my tv or at my desk. For some reason when the TV is shut off or if I switch the source of my desktop monitor to something else. The mac will go back to internal speakers. Is there any way to prevent this? I am assuming this is happening becuase the mac is losing the handshake with the monitor when I switch my source. If that is the case is there anything I can get to put before my DA that will make my mac think that something is always there?
It would be more ideal if I can just permanently set the audio output to hdmi from within the mac itself though.

The only really effective solution requires buying a Gefen HDMI Detective Plus this 'spoofs' the HDMI signal so the Mac thinks it is still there even if the AV receiver is turned off, or disconnected, or switched away from the Mac.
See http://www.gefen.com/kvm/dproduct.jsp?prod_id=8005
I bought a couple on eBay.

Any way to boost audio input when recording?

Hi; I have been recording speech interviews with Audio-Technica mics on a ProTools set-up and they've sounded great.
I've recently tried recording using the mics in Garageband using a M-Audio Mobile Pre USB, but the audio levels are always too low unless the subject is an inch or two from the mic, which isn't the best way to get quality audio.
Is there any way to boost the audio input when recording in GB or any other tricks people know of?
thx, Charlie

I'm actually having the same problem, except I'm recording straight into the computer (no interface).
I tried using an MBox, but the computer won't even recognize it...(if anyone's got suggestions for why that is, I'll gladly take them...).
My main question is the same as Charles's, however - how come the input level is so soft when recording using the "Built-In Input" (where I can use a mic, and have mobility) as opposed to the "Built-In Microphone"?

Any way to record mini displayport input?

Hey there,
Now that some companies offer hdmi and others to mini displayport adapters, I was wondering if the incoming data was "passing through" SL, or if it goes straight to display, so there would be no way to record it.
I'm asking because I want to webcast a live sport event this summer on the cheap. So I could use an external hdmi video switch, output that switch to the minidisplay port adapter then video mix on the fly using Wirecast.
Any answer is appreciated, thanks!

Hi
yes in Quicktime Pro click on file/new audio recording.
Or have a look at Audio-in http://www.versiontracker.com/dyn/moreinfo/macosx/15962 when run change audio device to 0xa27000401af2f
Tont

Is there any way of storing audio- / video-elements in the browser cache in Safari in iOS?

Hi there,
I'm desperatly trying to find a solution for a web application that has to run on an iOS-Safari (e.g. on iPad, iPad2 and iPhone 4):
It's a web-application I wrote some time ago which lets the user search for and listen to short music samples (MP3s, all from ~100 kB to ~1.5 MB). The audio player is Flash-based, so it doesn't work on iOS-devices at the moment and I'll have to implement an alternative either in HTML 5 or with a "direct" QuickTime-object.
Both my HTML 5- and QuickTime-alternatives for iOS-devices work fine so far, but there's one major problem I can't find a solution to:
Unlike Flash and most HTML 5-capable browsers on Windows Safari on my iPad 2 won't store the audiofiles in the browsercache after loading and playing them - neither with HTML 5 audio-tags nor with a QuickTime-Object. Every time I load an audio file for playback from the server (with JavaScript-Commands, so without changing or reloading the whole page) it's downloaded again completely.
If a user listens to sample A and then to sample B, Safari forgot about having played sample A and downloads the whole MP3 again if I like to listen to it again. On a mobile device with a potentially narrow bandwith this behaviour is out of the question.
Is there a way of storing downloaded audiofiles opened by HTML 5 or QuickTime in Safari's cache so it remembers already having downloaded them - like it caches usual "web-files" like HTML, CSS or JPEG-images, or like Flash stores such objects in its local cache?
The Application Cache with a manifest-file is not an option - this only seems to work if the browser is offline, for example if the iOS-device is in "Airplane"-Mode.

Yes, I watched it. It contains interesting stuff I have to admit I didn't know yet, but unfortunately I still can't find a solution to my problem:
My first attempt was trying to use the Application Cache with a manifest file - although this is not really the intended purpose for my application... I don't have a static set of files that I want to have cached or "available offline" - I just want to cache MP3s which the user has played yet.
It should be possible to use a "dynamic manifest": One that is parsed by the Apache PHP module and listing the files played so far from a PHP session - something like this:
<?php
session_start();
header("Content-Type: text/cache-manifest, charset=UTF-8");
echo "CACHE MANIFEST\n";
foreach($_SESSION['playedSongs'] as $song)
    echo $song."\n";
?>
So whenever a song is loaded / played, I could access the PHP session with AJAX, insert the filename of the played file and manually update the manifest by calling window.applicationCache.update().
There are two problems with this:
First of all: It doesn't work. And I didn't even get to the point of trying to use a dynamic manifest:
<!DOCTYPE html>
<html manifest="cache.manifest">
    <head>
        <title>Test</title>
        <script type="text/javascript">
        function playStuff(id)
            if(id == 1)
                window.document.getElementById("audio").innerHTML = '<audio controls preload="automatic" autobuffer><source src="song01.mp3" type="audio/mp3" /></audio>';
            else if(id == 2)
                window.document.getElementById("audio").innerHTML = '<audio controls preload="automatic" autobuffer><source src="song02.mp3" type="audio/mp3" /></audio>';
        </script>
    </head>
    <body>
        <div id="audio"></div><br />
        <br />
        <input type="button" value="playStuff(1)" onclick="playStuff(1)" />
        <input type="button" value="playStuff(2)" onclick="playStuff(2)" />
    </body>
</html>
The cache.manifest looks like this:
CACHE MANIFEST
song01.mp3
song02.mp3
and is properly returned from Apache as "text/cache-manifest" by adding
AddType text/cache-manifest manifest
to the .htaccess of this directory.
The Apache-logs clearly show that the Safari (respectively "AppleCoreMedia") doesn't care about the application cache when it comes to audio-files:
Safari itself seems to acknowledge the manifest and indeed preload the files:
192.168.0.40 - - [23/Jul/2011:12:45:46 +0200] "GET /websql/index2.html HTTP/1.1" 200 2619 "-" "Mozilla/5.0 (iPad; U; CPU OS 4_3_3 like Mac OS X; de-de) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8J2 Safari/6533.18.5"
192.168.0.40 - - [23/Jul/2011:12:45:46 +0200] "GET /websql/cache.manifest HTTP/1.1" 200 79 "-" "Mozilla/5.0 (iPad; U; CPU OS 4_3_3 like Mac OS X; de-de) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8J2 Safari/6533.18.5"
192.168.0.40 - - [23/Jul/2011:12:45:46 +0200] "GET /websql/cache.manifest?%3E HTTP/1.1" 200 79 "-" "Mozilla/5.0 (iPad; U; CPU OS 4_3_3 like Mac OS X; de-de) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8J2 Safari/6533.18.5"
192.168.0.40 - - [23/Jul/2011:12:45:46 +0200] "GET /websql/song02.mp3 HTTP/1.1" 200 120525 "-" "Mozilla/5.0 (iPad; U; CPU OS 4_3_3 like Mac OS X; de-de) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8J2 Safari/6533.18.5"
192.168.0.40 - - [23/Jul/2011:12:45:46 +0200] "GET /websql/song01.mp3 HTTP/1.1" 200 120525 "-" "Mozilla/5.0 (iPad; U; CPU OS 4_3_3 like Mac OS X; de-de) AppleWebKit/533.17.9 (KHTML, like Gecko) Version/5.0.2 Mobile/8J2 Safari/6533.18.5"
Up to this point I did nothing but opening my test-application in Safari.
Playing song01.mp3:
192.168.0.40 - - [23/Jul/2011:12:47:25 +0200] "GET /websql/song01.mp3 HTTP/1.1" 206 2 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:47:25 +0200] "GET /websql/song01.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:47:25 +0200] "GET /websql/song01.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:47:25 +0200] "GET /websql/song01.mp3 HTTP/1.1" 304 - "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:47:25 +0200] "GET /websql/song01.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:47:29 +0200] "GET /websql/song01.mp3 HTTP/1.1" 304 - "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:47:29 +0200] "GET /websql/song01.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
Playing song2.mp3:
192.168.0.40 - - [23/Jul/2011:12:48:04 +0200] "GET /websql/song02.mp3 HTTP/1.1" 206 2 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:04 +0200] "GET /websql/song02.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:04 +0200] "GET /websql/song02.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:04 +0200] "GET /websql/song02.mp3 HTTP/1.1" 304 - "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:04 +0200] "GET /websql/song02.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:05 +0200] "GET /websql/song02.mp3 HTTP/1.1" 304 - "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:05 +0200] "GET /websql/song02.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
Playing song1.mp3 again:
192.168.0.40 - - [23/Jul/2011:12:48:38 +0200] "GET /websql/song01.mp3 HTTP/1.1" 304 - "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:38 +0200] "GET /websql/song01.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:38 +0200] "GET /websql/song01.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:38 +0200] "GET /websql/song01.mp3 HTTP/1.1" 304 - "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:38 +0200] "GET /websql/song01.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:40 +0200] "GET /websql/song01.mp3 HTTP/1.1" 304 - "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:48:40 +0200] "GET /websql/song01.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
Playing song2.mp3 again:
192.168.0.40 - - [23/Jul/2011:12:49:12 +0200] "GET /websql/song02.mp3 HTTP/1.1" 304 - "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:49:12 +0200] "GET /websql/song02.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:49:12 +0200] "GET /websql/song02.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:49:12 +0200] "GET /websql/song02.mp3 HTTP/1.1" 304 - "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:49:12 +0200] "GET /websql/song02.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:49:13 +0200] "GET /websql/song02.mp3 HTTP/1.1" 304 - "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
192.168.0.40 - - [23/Jul/2011:12:49:13 +0200] "GET /websql/song02.mp3 HTTP/1.1" 206 120525 "-" "AppleCoreMedia/1.0.0.8J2 (iPad; U; CPU OS 4_3_3 like Mac OS X; de_de)"
Every file is downloaded again completely when playing it. So "AppleCoreMedia" (whatever this may be exactly, the QuickTime-plugin that is triggered by the HTML 5 audio-element I suppose?) either doesn't have access to the Application Cache or simply just doesn't realize the files in it. So if I switch my iPad to "Airplane Mode" now, the Safari is unable to access / load / play the files.
I also tried using a QuickTime-object instead of an HTML 5 audio-tag (as far as I know HTML 5 audio and video in Safari always use QuickTime?) and controlling it with something like:
document.movie1.SetURL('song02.mp3');
Nothing changes, it's just like using HTML 5 audio and everything gets downloaded again when loading/playing it.
And even if this would work there'd still be a problem:
To properly implement that I would have to load the MP3-file in the Application Cache before playing it. When doing this it seems impossible to show a "real" progress: The ProgressEvent that is fired from the Application Cache after updating it doesn't seem to provide any information about data loaded so far and the complete size of a file. It's just "File 1 from 2" and so on, and not a "real" progress where I could determine something like: "100 kB of 1.2 MB loaded" as I can with the audio-element.
All the other storage-approaches like Web SQL / Web Database or Local Storage are no help either:
I don't see any way of getting the MP3 data into Local Storage or Web Database or getting it out again to play it. The HTML 5 Canvas-element has a toDataURL()-function to produce a Base64-encoded representation and use it for storage - the Audio-element doesn't seem to have anything like this.
My last really "dirty" approach was trying to load "manually" Base64-encoded-MP3s with a combination of AJAX and PHP: A PHP-script outputs a Base64-representation of a MP3-file and is loaded by AJAX, so I could store the Base64-representation e.g. as Local Storage or in Web Database:
<?php
$infile = 'song01.mp3';
$contents = file_get_contents($infile);
$base64 = base64_encode($contents);
$audio = 'data:audio/mp3;base64,'.$base64.'';
echo $audio;
?>
I tried using the resulting AJAX responseText as the source-argument in an audio-source-tag. Suprise: It doesn't work in Safari on my iPad 2, the player just fails to load the "file", although this works fine in Chrome on Windows. Possibly a size limitation for Base64-URIs on Safari / iOS.
And again: Even if this was working in iOS/Safari I don't know of a way to determine a real progress from an AJAX-query...
The last thing I could think of is not replacing the audio- or source-tags when loading a song but leaving them in the DOM-structure, check if it's already there when a song is loaded and just add a new audio-tag if a song hasn't been loaded yet.
This solution would be my last resort: I'd have to rewrite nearly the whole application to completely operate on JavaScript / AJAX to stay on one site in the browser - else the "cached" audio data would be lost again when changing to another site in Safari.
Furthermore I think there'll be a small cache limit somewhere when doing this?
Any ideas?

Is there any way to cut audio while keeping the video it is tied to?

ok, I have a video from a dvd i burned on FCE but the sound is messed up. I am going to be making a AMV with it anyway so I don't really need the audio. Is there any way of cutting the audio without disturbing the video it was imported with. I must stress that they were not imported separately.

Place the footage in the timeline. Click the lock key on the vidoe time line. This will place a screen looking thing over the video. Select the audio in the time line and press delete. That will delete the audio but keep the video. Then unclick the lock key and all should be well. Always remeber the "undo" option if you mess up. I use it all the time.
Message was edited by: vidoedude

Simplest Ways to Record Audio on a Mac

I'm looking for some simple and inexpensive apps to use to record audio on my iMac running Mavericks. Mostly I'd want to record streaming radio broadcasts, much like using a DVR for TV. Someone showed my Audio Hijack Pro, but it was costly and seemed very complex to use. Any suggestions? Thanks.

I did think of that after I had posted. so now when working on video if I have the dv device with me Ill use the haedphone jack if not Im assuming I do what I did?
what I mean is if I dont have the device with me its just me and my mac book pro and external drive and Im viewing video on the mac on its screen
thanks for pointing this out other wise I would have been posting again when I was trying to get it to tape!!!

Is there any way to record a whole call that is st...

My Skype recorder glitched and I lost the recording. The call is still going; is there a way to record the call from the beginning? Thanks.

Recording off Skype is like recording off the radio (if that's even done anymore), it's not like a DVR. The best you can do is continue to record the current audio. If you can resurrect whatever portion you saved earlier you may be able to splice the audio together. If your recorder didn't record it, then there isn't anything to retrieve since Skype doesn't record your calls.

Is there any way to record a stereo signal on to a single track?

In other words, I would like to be able to record a stereo single track (without multi tracking) such as a guitar ran through a stereo effects pedal, or two microphones through a mixer panned extreme left & right. Any way to do this with Garageband on one track? I've tried two separate interfaces, a Apogee Jam and a Sonoma Wireworks via the 30-pin connector and it plays back in mono. Just wondering if there's an app that would facilitate stereo on one track?

By definition a single track is monophonic. Stereo requires two tracks and two channels.
If you have recorded a single track of electric guitar, you could route that to a stereo effect and you would have a stereo sound but it would still require two channels for playback.

Is there any way to record a screen share session?

I know you can record audio and video chats that you yourself initiate. However, I have clients that invite me to screen share, and upon acceptance, I have no control over recording. Is there an app?

Hi,
In Snow Leopard and Lion there is Quicktime X (Screen Record.)
10:40 PM Thursday; August 4, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

Any way to get audio out via RCA or 3.5mm jack?

I am interest in using AppleTV in a section of a fitness studio that I own.
The room has a pro audio A/V system with sound inputs via Bluetook, RCA or 3.5mm earphone jack. The 2 TV monitors are daisy-chained and receive inputs via HDMI.
However, if I want to have the audio portion of an AppleTV program played through the sound system, I need to feed audio into it using one of the inputs noted above. This isn't a problem with a Mac or iPad because I can use both HDMI and 3.5mm jacks to accomplish the goal. I could just turn up the TVs, but that isn't a great sound option given the setting and the other equipment.
Is there any way to jury-rig an audio output that works?
Might I be better off using a sling box to an iPad or a Macbook? I am already paying for cable TV as part of my Xfinity plan.
Thanks,
Scott

Something like this Digital Audio To Analog Audio Converter ... from Amazon will do the trick.
Search for audio digital to analog converter for other options.

Any way to split audio tracks in iMovie 09?

The only way I know how to shorten an audio clip (after all the video clips are there) is by changing the duration of the clip in the inspector. This can be rather laborious, trying to guesstimate the point at which you want the music to end. Anyone knows of a more efficient way?

Convert the Trailer to a standard project. You may then be able to edit the title or replace the title with one more suited to what you wish to apply. To convert the Trailer, in iMovie's menu select File>Convert to Project. Now you can edit virtually any part of the converted Trailer, but be careful to maintain the duration - otherwise the video will not match up perfectly with the supplied audio track.
John

Is there any way to change audio conforming in preferences?

Hi
I am uploading about 4 hours worth of footage for a new project to CS5 Premier Pro, and have found that I can only capture in 10 minute segments as when I capture anything longer due to capture/conform back up that inevitably occurs eventually PP decides that its not responding.
Does anyone else experience this & is there some way I can turn off the conforming while I am capturing & then capture the whole project at once, like overnight while I am sleeping?
thanks
Mandi

Mandy,
As Harm points out, Conforming is necessary. What is happening is that the Audio is converted to 32-bit floating-point for accurate editing, and then the PEK (Waveform Display) file is created. You end up with a CFA and a PEK for each Audio Clip, and these will be located where you directed your Scratch Disks (files).
I can only capture in 10 minute segments as when I capture anything longer due to capture/conform back up that inevitably occurs eventually PP decides that its not responding.
This is an odd problem, and I think that Harm is correct, that you have an outside issue, causing this. Now, when you say "capture," you do mean "Capture" as from a miniDV tape camera over FireWire using the Capture module in PrPro, don't you? If you are not doing Capture that way, then you are Importing the files. If the latter is the process that you are using, can you give us the full details of those files?
If the former, Capture, that should be in accordance with the Sequence's Capture settings.
Good luck,
Hunt

Is there any way of recording a voice message for call waiting?

Hi,
I currently have the call waiting system set up on my iPhone, so i can see when other people are trying to call me whilst already on a call.
However i would like the caller to know that i'm aware of their call so was wondering if there is an app or any software where i am able to record a voiceno

What I'm saying is call waiting is a carrier feature so a recording to interrupt the incoming call while you continue to talk likely would have to be implemented by the carrier. I don't have a recorded message for call waiting but call your carrier to find out if they offer such a feature.

Any way to record vocals and acoustic guitar at once?

I have been trying to get garage band to record me playing acoustic guitar while singing. Whenever I do it, I can't hear me singing. I use the firebox and connect into an MXL vocal mic.
Any suggestions?

59Sound wrote:
I can't hear me singing.
http://www.bulletsandbones.com/GB/GBFAQ.html#monitoron
(Let the page FULLY load. The link to your answer is at the top of your screen)

Any way to record audio?

Similar Messages

Maybe you are looking for