Any way to use an AD group for a batch script?

I have a .bat script that reads from a text file a list of computers and runs the script for each of them. But i want to make this happen automaticly if a user is part of that AD group. That can be done with GPO and running a script, but i still would need
to update my textfile. So is there any way i can communicate with AD through a script? So i can run it against a AD group instead of a textfile.

Your requirement is not fully clear to me regarding the automation you are planning to implement. In your post you mentioned you want to automate the process of reading computer object whereas the automation you are seeking is for users, so is it for users
or system? What exactly is your requirement?
Group policy can be used for automation esp group policy preferences based on subnet, group membership, IP etc. I don't think in-built dynamic group membership option is present within AD using criteria or role where as its available within exchange server.
Below reference might be helpful to you.
http://technet.microsoft.com/en-us/library/cc731892%28v=ws.10%29.aspx
http://www.grouppolicy.biz/2010/03/what-are-group-policy-preferences/
Awinish Vishwakarma - MVP
My Blog: awinish.wordpress.com
Disclaimer This posting is provided AS-IS with no warranties/guarantees and confers no rights.

Similar Messages

Is there any way to filter an AD group for Synchronization?

Project Server 2010 , the AD synchronization fails every week because of users who have left the organization.
Is there any way to filter the AD group so that only active users are picked up into the application?
Thanks in advance.

Thanks Ricardo.
The problem is that if a user leaves, his id is usually reused.
Eg. John Smith leaves the organization, his ID JSmith is reused.
But the original record is in the AD group, so it fails to recognize the new user say Jack Smith.
The error seen in the logs is typically:
" A resource could not be updated during Project Server Active Directory Synchronization because a duplicate windows account name conflict occured that could not be resolved. Resource GUID: d2077b6c97992-57d5-4d87-9ba9-c6ae273. Resource Name XYZ"
and
"the supplied windows account name is invalid."

I have the app "viPlay" on my iPad and iPhone. Is there any way that it could be available for the Apple TV? I'd like to access my personal videos from my hard drive using the Apple TV through the 'viPlay' app.

I have the app "viPlay" on my iPad and iPhone. Is there any way that it could be available for the Apple TV? I'd like to access my personal videos from my hard drive using the Apple TV through the 'viPlay' app.

Welcome to the Apple Community.
Nobody here will have any information about that since the community is only made up of users like you or I. Anything else is mere speculation and speculation is not permitted here under the Terms of Use for these communities.
Any responses you may receive may well be removed and would be wholly unreliable in any case.
If you believe that Apple's product may be enhanced in anyway you can leave feedback here.

Is there any way to use a MacBook Pro as a router to set up a wireless connection for XBOX live.

Is there any way to use a MacBook Pro as a router to set up a wireless connection for XBOX live.

Mac OS X 10.6 Help: Sharing your Internet connection

Is there any way to use a aunetreceive for a track within GarageBand?

Is there any way to use a aunetreceive for a track within GarageBand?
I have an application, Soundboard, which sends audio via the aunetsend plugin. I'd like to manage the output of this application within Garageband as a track. Is there any possible way to do this?
Thanks

Alas, no, not in VBA.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Is there any way to use a For Each Loop for each property of an User Defined Type?

Is there any way to use a For Each Loop for each property of an User Defined Type? That would be very handy!
Jorge Barbi Martins ([email protected])

Alas, no, not in VBA.
Regards, Hans Vogelaar (http://www.eileenslounge.com)

Is there any way to stop certain 'contact groups' syncing on to my iPhone from Mac?

Hi All,
I use my Mac for business purposes and on it I want to use the conact groups feature to create a load of contacts, with email addresses, which i will regularly send emails to. However, i noticed whenever i add or change any contacts on my mac, it updates them wirelessly on my iPhone..
Is there any way I can stop certain groups from syncing on to my iPhone??
Hope ive explained myself properly.
Thanks in advance.

never mind worked it out

Any way to use cursor values inside other cursor by bulk collect?

hi,
Is there any way to use cursor get_tables value insdide loop get column if i am using bulk collect in both cursors?
I tried a lot but i am nt able to do it.kindly help...
create or replace procedure MULTIPLE_CURSORS_PROC is
v_owner varchar2(40);
v_table_name varchar2(40);
v_column_name varchar2(100);
cursor get_tables is
select distinct tbl.owner, tbl.table_name
from all_tables tbl
where tbl.owner = 'SYSTEM';
cursor get_columns is
select distinct col.column_name
from all_tab_columns col
where col.owner = v_owner
and col.table_name = v_table_name;
begin
open get_tables;
loop
fetch get_tables into v_owner, v_table_name;
open get_columns;
loop
fetch get_columns into v_column_name;
end loop;
close get_columns;
end loop;
close get_tables;
end ;

hi there
Refer this
CREATE OR REPLACE PROCEDURE MULTIPLE_CURSORS_PROC
IS
   TYPE scol IS VARRAY (10000) OF VARCHAR2 (32767);
   v_table_name    scol;
   v_column_name   scol;
   TYPE curtyp IS REF CURSOR;
   get_columns     curtyp;
   CURSOR get_tables
   IS
      SELECT   DISTINCT tbl.table_name
        FROM   all_tables tbl
       WHERE   tbl.owner = 'SYSTEM';
BEGIN
   OPEN get_tables;
   LOOP
      FETCH get_tables BULK COLLECT INTO   v_table_name;
      FOR indx IN v_table_name.FIRST .. v_table_name.LAST
      LOOP
         SELECT   DISTINCT col.column_name
           BULK   COLLECT
           INTO   v_column_name
           FROM   all_tab_columns col
          WHERE   col.table_name = v_table_name (indx);
         FOR ind IN v_column_name.FIRST .. v_column_name.LAST
         LOOP
            DBMS_OUTPUT.put_line (v_column_name (ind));
         END LOOP;
      END LOOP;
      EXIT WHEN get_tables%NOTFOUND;
   END LOOP;
   CLOSE get_tables;
END MULTIPLE_CURSORS_PROC;regards
Hitesh

Any way to use filter to exclude tables in navagation pane?

Is there any way to use filter to exclude a set of tables from the table list in the navagation pane? I have a number of tables (15+) starting with the same prefix eg. AB123 that I would like eliminate from the list. They sort right to the top and I always have to scroll down, and go through the show more dialog to see the entire list.
I am sure I'm missing something, but not sure what. Help Center has nothing to offer.
Thanks
Glenn

This has been mentioned on the forum before - basically the need for more elaborate ways to filter (multiple conditions as well as 'not like'). It is on our list for future consideration, meaning post-production.
-- Sharon
Message was edited by:
sbkenned

Is there any way to use -useLegacyAOT option in FlashBuilder 4.6?

I need to build my ipa with old version of Engine because i have some problems about loading images from outside. Since with Air 15 it is default engine, and i cannot quit Air 15 because of the iTunes specs. I cannot add -useLegacyAOT=yes to compiler options on Adobe Flash Builder 4.6 because it seems that it can be added at FB4.7.
So is there any way to add this options when i am using FB4.6
Thanks in advance.

DeepakJ wrote:
Hi,
Is there any way to use a control break on Dept column in a SQL query to have a Output-2 instead of Output-1.
Is there any way to modify the SQL query.
SQL
select dept, loc, count(*)
from dept
group by dept, locOutput-1
Dept      Loc       Count(*)
10         AA        1
10         BB        2
10         CC        2
20         AA        2
20         BB        2Output-2
Dept      Loc       Count(*)
10         AA        1
BB        2
CC        2
20         AA        2
BB        2
Yes, using the <tt>lag</tt> analytic function and specified ordering of the data:
select
    nullif(d.deptno, lag(d.deptno) over (order by d.deptno, d.loc, e.mgr nulls first)) deptno
, nullif(d.loc, lag(d.loc) over (order by d.deptno, d.loc, e.mgr nulls first)) loc
, e.mgr
, count(*) n
from
    dept d
      join emp e
        on d.deptno = e.deptno
group by
    d.deptno
, d.loc
, e.mgr
order by
    d.deptno
, d.loc
, e.mgr nulls first;
DEPTNO LOC       MGR   N
    10 NEW YORK         1
                  7782   1
                  7839   1
    20 DALLAS    7566   2
                  7788   1
                  7839   1
    30 CHICAGO   7698   4
                  7839   1
    40 BOSTON    7698   2
                  7902   1

My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?

My family shares one apple id. Is there any way to make an apple id for each member of my family and have it all connected to the same credit card and have the same previous downloads open to download by signing in to each members personal apple id?

Hi cindy,
If you all have individual Apple IDs, then you would be able to dowload music from a shared iTunes library on a computer, but you would not be able to sign on each individual ID on an iOS device in order to download music purchased under the original Apple ID without a 90-day waiting period between sign-ons.
Here's what I mean:
If you were to sign on a new Apple ID on, say, an iPhone, and then were to purchase and download some music from iTunes, then you would have to wait 90 days before you could sign on the old Apple ID to that iPhone in order to download previously purchased material (and vice versa).
However, if all of the music purchased by that origjnal Apple ID is in an iTunes library on a shared computer, then you can hook up the device and selectively sync any music in that library to the device. You can also sign on any of the Apple IDs to that shared iTunes library and purchase music to be added to the library.
You would need to authorize the computer for each of the new Apple IDs.
Each of the Apple IDs would also be able to download that music purchased either by syncing to the iTunes library on the computer or by downloading it OTA on the device.
So, each Apple ID can download music, movies, etc. purchased with that Apple ID OTA to the device. Also each Apple ID can sync any music, movies, etc. that are in the iTunes library on the computer regardless of who purchased them.
The only other thing you would need to remember is that if an App needed to be updated, then the original Apple ID that was used to purchase that App would come up, and the password that goes with that Apple ID would be required to do the update.
Hope that helps,
GB

Is there any way to change the default font for outgoing text-messages, in "Messages"? (OSX 10.10)

Is there any way to change the default font for outgoing text-messages, in "Messages"?
I can change it for one conversation, but then it resets to the default, tiny font.
The preferences menu only lets me change the conversation font.
(OSX 10.10)

Hi,
As you may remember there used to be a Messages pane to the Preferences where the Font and colour of the Balloons or background and the Font text colour could be changed.
And there was a Format Menu for character, word and Sentence changes in the current IM or iMessage.
Those have gone in Yosemite's version of Messages (Despite it retaining the designation of Messages 8 the same as Mavericks' version).
All that can be done now is set the size of the font and this has been moved to the General Section of the Preferences.
The Yosemite version has also been fixed to using the Balloons style of send and receiving any type of messages as well.
Changing the Font would involved editing the Balloon.transcript file.
10:34 pm Saturday; December 13, 2014
 iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Is there any way to use Control Break in a SQL Query

Hi,
Is there any way to use a control break on Dept column in a SQL query to have a Output-2 instead of Output-1.
Is there any way to modify the SQL query.
SQL
select dept, loc, count(*)
from dept
group by dept, locOutput-1
Dept      Loc       Count(*)
10         AA        1
10         BB        2
10         CC        2
20         AA        2
20         BB        2Output-2
Dept      Loc       Count(*)
10         AA        1
             BB        2
             CC        2
20         AA        2
             BB        2Thanks,
Deepak

DeepakJ wrote:
Hi,
Is there any way to use a control break on Dept column in a SQL query to have a Output-2 instead of Output-1.
Is there any way to modify the SQL query.
SQL
select dept, loc, count(*)
from dept
group by dept, locOutput-1
Dept      Loc       Count(*)
10         AA        1
10         BB        2
10         CC        2
20         AA        2
20         BB        2Output-2
Dept      Loc       Count(*)
10         AA        1
BB        2
CC        2
20         AA        2
BB        2
Yes, using the <tt>lag</tt> analytic function and specified ordering of the data:
select
    nullif(d.deptno, lag(d.deptno) over (order by d.deptno, d.loc, e.mgr nulls first)) deptno
, nullif(d.loc, lag(d.loc) over (order by d.deptno, d.loc, e.mgr nulls first)) loc
, e.mgr
, count(*) n
from
    dept d
      join emp e
        on d.deptno = e.deptno
group by
    d.deptno
, d.loc
, e.mgr
order by
    d.deptno
, d.loc
, e.mgr nulls first;
DEPTNO LOC       MGR   N
    10 NEW YORK         1
                  7782   1
                  7839   1
    20 DALLAS    7566   2
                  7788   1
                  7839   1
    30 CHICAGO   7698   4
                  7839   1
    40 BOSTON    7698   2
                  7902   1

Any way to use a quick and dirty icon like cLabel in the quick tools toolbar?

I am a javascript cut-and-paster with ability to cobble things together.
In previous versions of Acrobat, I had tools that were added to the toolbar using the technique shown in this script:
app.addToolButton({cName: "MyFlattenButton",
   cLabel: "Flatten",
   cEnable: "event.rc = (app.doc != null);",
   cExec: "flattenPages();"
That would create a toolbar button with the "icon" that read "Flatten" which is all that I needed. I could click on it and it would flatten all pages in the document.
I used this to create several different tools, all with different names and cLabels.
This script still works in Acrobat XI (it adds the tool to the add-on tools list, and then I can add it from there to the quick tools toolbar). The cLabel names show up in the add-on tools list, but not in the quick tools toolbar. In the toolbar they all use the same generic icon (but they all work correctly).
From reading in this forum I see that there is a way to create a custom icon but it does not look easy. Is there any simple way to just have text appear as the icon as I used to do for earlier versions of Acrobat?
Thanks.

One further question...
I found a code snippet somewhere online that attempted to deal with this issue. That led me to this (failed) solution:
this.importIcon("myIconFlat", "/D/J/CAD Standards/Stamps/Acrobat tools/flatten.jpg", 0);
var flatIcon = util.iconStreamFromIcon(this.getIcon("myIconFlat"));
app.addToolButton({cName: "MyFlattenButton",
   cLabel: "Flatten",
   oIcon: flatIcon,
   cEnable: "event.rc = (app.doc != null);",
   cExec: "flattenPages();"
The problem there is that importIcon is not allowed from a folder-level javascript, apparently. Would there be any way to use the importIcon part of this from the console and then cut and paste some output into the rest of the script? Just looking for a way to get the icon into my script.

Is there any way to display filenames or captions for photos?

is there any way to display filenames or captions for photos?

Thanks. There are so many it's very hard to see which one does what. Since I edit on the MacBook Pro using Photoshop Elements, all I really need is a way of seeing the filenames, and secondarily re-arranging thumbnails on the iPad screen manually.

Any way to use an AD group for a batch script?

Similar Messages

Maybe you are looking for