Anybody experience with increasing barcode size on form?
We are printing an SU Label form with a barcode. The SU Label is a WM sapscript form. I've been trying to size up the barcode as large as possible to get our scanner to read it at least 30 feet. In SE73, my print control is currently set to:
\e(s4p100h220v55,165b55,165s24704T
This gets us to around 20 feet before it can no longer be scanned. I'm wondering if anybody has insight into anything that can be done to improve the barcode readability at a larger size?
Thanks, Vlad
The size of a barcode is determined by the printer escape sequence,
which is sent to the printer to switch on the barcode.
Please go to transaction:
SE73 -> 'Printer Barcodes' -> Select your 'Device Type'
-> You get a list of the barcodes, which the device type is able
to print. On the right side you see the names of two print
controls: A prefix to switch on the bar code (SBP...) and a
suffix to switch off the bar code (SBS...)
-> Highlight the print control name with the cursor and press the
'Displ. print control' button.
-> You should now see the printer escape sequence that tells the
printer to start the barcode.
This sequence selects amongst other things the type and size of the
barcode.
To get another barcode size, it is required to change this sequence.
Please copy the device type to another name before changing:
SPAD -> Utilities -> For device types -> Copy device type.
If you use a Jetcaps barcode SIMM, the attached Note 45643 explains the
sequences. Otherwise your printer manual should be able to help you.
Overall width cannot be changed, have to change width of bars and
spaces.
Regards.
Similar Messages
-
i have an agreement form created in word doc. i want to hire some one experience with formscentral to recreate the form and user be able to complete the agreement, sign it electronically (using echosign) then click submit. i will be alert of new response. can someone connect me to where i can talk to someone can provide this service. i have sample of agreement form
Hi c3 cyber club,
Unfortunately FormCentral and Echosign are two different services and forms created in Forms central can only be submitted via and to Forms Central.
We cannot have the form filled in using FormCentral and get it signed using Echosign.
However, you can use Echosign directly and you can get most of the functionality.
Thanks,
Vikrantt Singh -
Has anybody experience with "Cisco Anomaly Guard Module"
Hello,
had anybody experience with "Cisco Anomaly Guard Module" WS-SVC-AGM-1-K9 for Catalyst 6500?
We're looking for some IDS/IPS prevention system which could take 2-3 Gbits of traffic. From the documentation it looks not bad, and we can get them as used parts (6500 + Sup720 + AGM +ADM) quite cheap. The second solution is Arbor with cisco12000 as boader router (10Gbit uplink) is much more expencevie.
Arbor tries of cause sell us their solution as "Cisco Anomaly Guard Module" is ot of sale and doesn't have any new features, but from the Data sheets Cisco AGM is eactly what we need.
Or may be is there another solution which could be comparable to those two?
Thank you.Hello padatta,
AGM/ADM are IDS/IPS systems, one can of couse discuss about the terms, but it won't be productive :).
IDSM2 has not enough performance and it should sit inline, ADM/AGM can change he next hop for the diverted traffic and be out of traffic path during the normal operation.
Konstantin -
Anybody experience with Mac Leopard or Tiger on Equium A210-17I
Has anybody experience with Mac Leopard or Tiger on an AMD Toshiba? I read about some folks installing it on AMD and Intel and wondered how it could feel and work on an Equium. I have A210 17l.
Thanks for your input.It seems to be that you are alone with this idea. If you will try it in the future please post a little bit about it.
Good luck! -
Anybody experience with creating timelag function with FOX?
Dear All,
As can be seen from my former thread Katie announces that financial functions are not moved to IP. And nowadays these aren't available in BW-BPS either.
I'm just wondering if anybody has experience with creating financial unctions like timelag, allocation, IRR, accumulated balances etc in FOX?
And if so, how complicated is this. Any examples would be most appreciated.
Kind regards, HarjanHi Hatter,
thanks for the answer.
But what do you think about the ICY DOCK?
If you only want to use two drives, OWC has a nice
$67 dual drive black metal case.
I don't think that it is fast enough. Check the parameters:
"Maximum Data Transfer Rate: 1.5Gb/s (or 100MB/sec)"
Or FirmTek with a
much better $199 case with 3-speed fan for best
cooling.
Yes. This is fine. Here there is:
"High-performance storage data transfer up to 3.0Gbps (300MB/sec) per drive"
But what about this ICY DOCK? Although I know that it is not the most important part when we are talking about RAID disks, but this enclosure looks really nice. Will it work as good as it looks like?
PS: beware of anyone calling a device "hardware RAID"
when all it does is use an Oxford bridge.
How do you know that there is used an Oxford bridge, and why it work bad (as I suppose)?
Marek. -
How to increase font size in form that comes to me?
Hi guys, how would I go about increasing the size of the form content that I receive when clients fill in this form: http://www.gvcheese.co.nz/nett_wholesale.html
I've tried applying classes to the text fields but this has no effect on the form data.
Thanks in advance for advice,
JoYour Form to email processing script sends data to your email address, right? If you're having trouble reading your email,change your display font sizes.
Win XP:
Control Panel -> Appearance and Themes -> Display -> Appearance -> Font Size.
Win Vista:
Control Panel -> Appearance and Personalization -> Personalization -> Adjust Font Size.
Win 7:
Control Panel-> All Control panel items-> Display.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb
www.alt-web.blogspot.com -
Anybody experience with SAP Reliable Messaging (SAP-RM) from BizTalk?
Experience with SAP Reliable Messaging (SAP-RM) from BizTalk?
Has anyone experience with using SAP Reliable Messaging (SAP-RM) between BizTalk and SAP’s Enterprise Services?
SAP’s Enterprise Services can be synchronous request/reply, what SAP calls A2X. But many of SAP’s Enterprise Services are one-way, asynchronous. When not using SAP’s own integration solution (SAP Process Integration), SAP refers
to the use of either WS-ReliableMessaging (WS-RM) or SAP ReliableMessaging (SAP-RM). With BizTalk not supporting WS-ReliableMessaging (and not its persistent version), SAP-RM is the way to go.
More info about “SAP-RM” @ http://wiki.scn.sap.com/wiki/display/ABAPConn/Plain+SOAP
KoenI have searched, but didn't find any resources related with SAP Reliable Messaging (SAP-RM) from BizTalk, only found the resources about Web Services Reliable Messaging. I hope it will help you.
http://help.sap.com/saphelp_nw04s/helpdata/en/46/9743916d1115ece10000000a114a6b/content.htm
http://integr8consulting.blogspot.in/2013/11/ws-reliablemessaging-ws-rm-between-ibm.html
http://scn.sap.com/thread/798701 -
Brush Disappears with Increased Brush Size
Having issues with my news CS4. When I increase my brush size, no matter if it's an eraser, stamp tool or anything else, the brush cursor or "circle" starts to disappear once the brush is more than 175 pixels in diameter. I've checked preferences and the brush tool presets and cannot find why this is happening.
How do I fix this?
Thanks, NASAphotographerUpdate your video card drivers.
This is a well documented problem. Also ensure that you have installed the Photoshop 11.0.1 patch. -
HI,
i have developed a barcode of Code-128 with maximum width 10.
this width is not enough for my label i want it more bigger.
please suggest a way to do so.Hi friend,
There is a post already mentioned in the forum that the bar code size is getting doubled than the normal, when we see the bar code in print preview.
So just see the print preview whether you are getting the desired size else create a custom bar code of your own and use it.
There are many links available in SDN forum for creating custom bar code. So search that for creating custom bar code if it is needed.
If you still face queries please revert back to me i will help you.
Thanks,
Sri Hari
Edited by: srihari.kumar on Jan 5, 2012 12:16 PM -
Anybody experience with FCP X and Macbook pro 15inch 2.2?
My old mid 2009 macbook harddrive died on me today, and I'm thinking to upgrade. Sell the old one and buy the new 2011 2.2. The old one was slow in rendering and had lots and lots and lots of spinning beachballs. Was I pushing it too hard? Don't know, but it was horrible. I lost so much time.
Anyway, does anybody have this combo fcp x and the new 15inch macbook pro with the 1gig card and what are your findings??
Thanks
PeterI've got a 2011/2.2/8GB/6750 running FCPX. Once I troubleshooted my external HDs (a Drobo that was nearly full with Time Machine backups was slowing down the entire Firewire bus) things run a lot better. I'm currently storing video on a Promise Pegasus R4 Thunderbolt RAID and the entire system is pretty snappy. The only slowdowns are:
1. clips, events, and projects on slower hard drives can slow down launching the app and screen refreshes
2. FCPX is still flakey. It will run great for a whole day and then will refuse to launch the next morning.
3. exporting through Compressor is slow, particularly when I'm under deadline! 10 minute HD segments can take an hour or so. The Activity Monitor shows the CPUs maxed out, so I suspect that's the bottleneck. I've tried setting up distributed rendering but it doesn't work quite yet.
4. FCPX can be a RAM hog, so if you're a rabid multi-tasker like me, prepare to beachball or change your wicked ways.
All in all, FCPX runs pretty well on my MBP. If video editing was my main line of business, I'd seriously consider a Mac Pro stuffed with RAM and as many cores as I can find. I might wait for a newer one with Thunderbolt though for a bit of future-proofing.
Hope this helps... -
I'm a bit baffled, and hoping someone can help. With the latest update of Premiere CC, I am having trouble exporting to Vimeo. As a filmmaker and educator in Chicago, I do a lot of exporting to Vimeo, up until now with great success. Over the past few days, not only is Premiere crashing at 100% export, but it seems to be exporting larger files than before (and with fewer Vimeo options, I notice, in Media Encoder). Not only did this happen with a 30-minute class exercise straight out of a Canon camcorder, that inexplicably was being exported at around 3 or 4Gs, but more importantly: I am trying to replace the video file on Vimeo of a feature film of mine, and the EXACT same feature film, at the exact same length (82 minutes), with the exact same export stats, that was 3 GB in all it's past successful exports, is now exporting, inexplicably, as a 9 GB file - it's Vimeo HD 1080 - always is. Nothing has changed at all on my end.
This is a problem, as I have several items to export to Vimeo in the coming days. What's going on?
Thanks,
StephenOne other specific change I've noticed in the export settings is that export is now defaulting to H.264 Match Settings - High Bitrate, whereas before it defaulted to whatever settings I had previously used.
-
Has anybody experience with those enclosures?
Hi,
I found 2 interesting enclosures for creating RAID using SATA disks.
But I didn't have any of them in my hand.
So, has anyone tested one or both of them?
The first one:
http://eshop.macsales.com/item/Icy%20Dock/MB561S4S/
- seems to be a software RAID
The second:
http://www.thecus.com/products_over.php?cid=1&pid=3
- it's a hardware RAID. Looks very nice.
I wonder how they work with 2 drives inside (the Icy Dock with 2 or 4 drives), what data transfer I can get, etc.
Marek.Hi Hatter,
thanks for the answer.
But what do you think about the ICY DOCK?
If you only want to use two drives, OWC has a nice
$67 dual drive black metal case.
I don't think that it is fast enough. Check the parameters:
"Maximum Data Transfer Rate: 1.5Gb/s (or 100MB/sec)"
Or FirmTek with a
much better $199 case with 3-speed fan for best
cooling.
Yes. This is fine. Here there is:
"High-performance storage data transfer up to 3.0Gbps (300MB/sec) per drive"
But what about this ICY DOCK? Although I know that it is not the most important part when we are talking about RAID disks, but this enclosure looks really nice. Will it work as good as it looks like?
PS: beware of anyone calling a device "hardware RAID"
when all it does is use an Oxford bridge.
How do you know that there is used an Oxford bridge, and why it work bad (as I suppose)?
Marek. -
Has anybody experience with the application "MacKeeper"
The Qustion ist over there
thanks for helpThis guy keeps on top of how to uninstall this malware
http://applehelpwriter.wordpress.com/2011/09/21/how-to-uninstall-mackeeper-malwa re/ -
Help!..CS4 IS INCREASING FILE SIZES.
Hi all
Wondered if anyone has had a problem with increased files sizes when opening a document up in Photoshop? Anything i open up is increased by two thirds in file size and i've no idea why ( e.g..8MB doc opens as 24MB doc)
What is even more strange is that it won't let me reduce a file size to anything under 1MB.
Has anyone ever come across this problem?...would appreciate any help.
Thanks
BriHey Noel
Fair Play.
This is what is happening.
I’ve got a standard JPEG file that viewed in Explorer and Bridge reads as a 2.70MB (2838,796 bytes) file. Pixel dimensions 797x1000. Document size 6.75 x 8.47cm .Res 300 PPI.
When I open it in CS4 it reads 2.28MB. (This is the first thing I don’t understand)
Either way my simple( so I thought ) objective is to decrease the file size.
In the image size box I have re-set the resolution to 72ppi as I just need to post the image on a Website. My before and after calculations in the image Panel reads (was 2.28MB...now 134.3k)
Great! .this is what I want, However..... when I ‘save as’ and the JPEG compression box appears it has suddenly increased the file to 1.8MB Large file...and only allows me to reduce it to 1.7MB small file.
Admittedly this is not my area of expertise....I’m doing something wrong so any pointers would be much appreciated.
Bri -
Experiences with importing BOM from CADs?
Hi,
in the near future i have to connect CAD WICONA with SAP.
I have to import BOM from CAD to SBO and if it will be possible production order as well.
Has anybody experiences with this (generally, from any CAD software)? What may I expect?
thanks a lot
PetrHi John,
points 2. and 3. are clear for me, I made it already many times from files or other databases.
I know iBolt Magic, but when I need to use it only for importing BOM it`s too expensive solution for customer. It is no problem to write own application for import the BOM, but problem is, that the result from CAD will be one drawing (for example engine in one file) and I would like to import it to BOM in SBO.
I need to import only those thinks to BOM which are used in the one drawing. And here is the problem, because the BOM in CAD is`nt in a xml file and in the true, I did`nt found the file where the BOM is stored yet.
Thanks
Petr
Maybe you are looking for
-
Transcation RSA2 problem in R/3 4.7 version
Hi When i execute RSA2 transaction, screen is going to welcome screen, and i could not see any errors. if i execute the RSA2 transaction on welcome screen does not reflect any change and did not find any error messages? I checked the transaction code
-
Export Parameters in Parameterized Message Mapping does not work.
Hello, XI-Gurus! I have a question: how to use an EXPORT parameter in Parameterized Message Mapping? seems it does not work... (I use XI / PI 7.1) For example, I have a follow scenario: a large message comes to XI from one BS (message contains a lot
-
Walkman app crashes all the tme
I have an Xperia j and I fine when listening to the walkman app n using another app, such as Facebook or game the walkman app crashes and continues to do so whenever using it with another app. It always stops n resets it self back at the top of the p
-
How to uninstall photoshop cs3 when it came as part of cs3 web premium
is there a way?
-
Purchased Tab under store went missing all of a sudden.
yup just completley dissapeared on me, whats going on? any way to fix it. i tried the smart playlist but did not like it as much as the regular tab. also tried going into purchase history under my account but that did not work as well. thanks for any