I have an agreement form created in word doc. i want to hire some one experience with formscentral to recreate the form and user be able to complete the agreement, sign it electronically (using echosign) then click submit. i will be alert of new response.

i have an agreement form created in word doc. i want to hire some one experience with formscentral to recreate the form and user be able to complete the agreement, sign it electronically (using echosign) then click submit. i will be alert of new response. can someone connect me to where i can talk to someone can provide this service. i have sample of agreement form

Hi c3 cyber club,
Unfortunately FormCentral and Echosign are two different services and forms created in Forms central can only be submitted via and to Forms Central.
We cannot have the form filled in using FormCentral and get it signed using Echosign.
However, you can use Echosign directly and you can get most of the functionality.
Thanks,
Vikrantt Singh

Similar Messages

I work a long list. Each line has a link that I click on to work. I then click submit. It does not return to the last line worked. Goes to the begining.

I go to the Insurance Auto Auction website to access a list of vehicles up for auction. When using "explorer" I can follow the link and set a bid value then click submit. It will return me to the last position on one the list. Firefox will sometimes doe this too but more often than not it brings me back to the top of the list. When I am looking at 300 units this becomes very frustrating.

Try opening each link in a new Tab, and when you're done with each Tab, close it. The "list" page will be sitting exactly where you left it, ''unless that page did an automatic refresh to add newer information while you were viewing a different tab.''
Middle-click a link
or use { Ctrl + click }
or right-click and use Open Link in New Tab

I created a pdf form from a Word doc with 9 pt aerial font formatting; the text on the pdf form is aerial 9 pt, but the fields are formatted in courier 12 pt - How do I reformat the font in the fields??

I created a pdf form from a Word doc with 9 pt aerial font formatting; the text on the pdf form is aerial 9 pt, but the fields are formatted in courier 12 pt - How do I reformat the font in the fields??

You can set up a temporary button (or link, bookmark, etc.) and add the following JavaScript action:
// Mouse Up script for a temporary button (or bookmark, etc.)
// Change the font and font size for all text fields in this document
for (var i = 0; i < numFields; i += 1) {
    var f = getField(getNthFieldName(i));
    if (f.type === "text") {
        f.textFont = font.Helv;
        f.textSize = 9;
It also sets the font size, but you can remove that line if you don't need to do that.

Pls tell me how I can convert a PDF form to a Word doc, and have radio buttons etc work?

Pls tell me how I can convert a PDF form to a Word doc, and have radio buttons etc work? My PDF form did convert using Adobe PDF Export.... but the formatting is a schamozzle if I try to do anything with it. Most importantly, I need the check boxes and radio buttons to work in Word!

Checkboxes and radio buttons are form objects from Acrobat. There is no equivalent for these objects, with the way they were constructed, within Word.
I'm sorry for the inconvenience.
David

Hello, i have buy iphone 6 recently now it is fall down on the ground and any chance to repair buy apple on free of cost if not then what will be price for this

Hello, i have buy iphone 6 recently now it is fall down on the ground and any chance to repair buy apple on free of cost if not then what will be price for this

santosh7783 wrote:
and its screen is break down please help me
iPhone 6 screen replacement is $109 U.S.
=> https://www.apple.com/support/iphone/repair/screen-damage/

OLE2 Doc/Code snippet to assist in creating a word doc with underlined text

I would like to use OLE2 to create a simple Word document. I would like some of the text to be bold/underlined and the rest of the text to be regular. There seems to be a serious dearth of information regarding OLE2 in conjunction with PS/SQL in Word applications. We're running Forms 6 and Oracle 9i.
I don't believe that I need to use the techniques described in the Forms Manual (OLE2 containers, etc.). I have managed to create a Word doc and write some text to it but I've been unable to find out/guess at the syntax that I'd need to control bolding and underlining. It would be a big help if I could just find the syntax for Word OLE2 commands. During my documentation search, I seem to remember a post that mentioned 'Reference 2' and maybe 'Reference 3' as a source of information related to OLE2 in PL/SQL code. If anyone can give me a shove in the right direction I'm more than willing to read the manuals. I won't be too disappointed if someone could send me a code snippet either!
Thanks,
Ron Walker

Hi Ron,
Office ships with a number of resources that you will find indispensable for the sort of work you're doing. Take a look at the VBA IDE (Visual Basic for Applications IDE). You may already be familiar with it, if you've ever written a Word macro, but to call it a macro editor sells it short -- it is a full-blown development environment. Its Object Browser allows you to browse Word's object model, search by keyword, and view call syntax.
In case you aren't familiar with the VBA IDE, try this:
1. Open Word
2. Switch between Word and the VBA IDE by pressing <Alt><F11>
3. Open the Object Browser by pressing <F2>
Spend some time familiarizing yourself with the Object Browser. Constrain its scope by selecting the Word library instead of <All Libraries> (the default). Learn to search by keyword. Click on items within your results for details. If Visual Basic Help is installed, pressing <F1> will raise help on a selected item.
Visual Basic Help may not be part of the Compact or Typical install. Running Office Setup, either from the install CD, or through Add/Remove Programs under Control Panel, will allow you to add the feature. (The Office installer lists Visual Basic Help in the Office Tools section.)
I have found the VBA IDE to be the perfect place for prototyping and testing automated processes. It is a far friendlier environment for learning Office automation, as it offers code completion and context-driven help. Once the process works, I manually translate my VBA routine into Forms PL/SQL, which is fairly painless. I've written a short tutorial, that I will post shortly -- I didn't want to bury it in this thread!
Hope this helps,
Eric Adamson
Lansing, Michigan

I would appreciate it if someone could advise me as to the optimum resolution, dimensions and dpi for actual photographic slides that I am scanning for use in a Keynote Presentation, that will be projected in a large auditorium. I realize that most proje

I would appreciate it if someone could advise me as to the optimum resolution, dimensions and dpi for actual photographic slides that I am scanning for use in a Keynote Presentation, that will be projected in a large auditorium. I realize that most projectors in auditoriums that I will be using have 1024 x 1200 pixels, and possibly 1600 x 1200. There is no reference to this issue in the Keynote Tutorial supplied by Apple, and I have never found a definitive answer to this issue online (although there may be one).
Here’s my question: When scanning my photographic slides, what setting, from 72 dpi to 300 dpi, would result in the best image quality and use up the most efficient amount of space?
Here’s what two different photo slide scanning service suppliers have told me:
Supplier No. 1 tells me that they can scan slides to a size of 1544 x 1024 pixels, at 72 dpi, which will be 763 KB, and they refer to this as low resolution (a JPEG). However, I noticed when I looked at these scanned slides, the size of the slides varied, with a maximum of 1.8 MB. This supplier says that the dpi doesn’t matter when it comes to the quality of the final digital image, that it is the dimensions that matter. They say that if they scanned a slide to a higher resolution (2048 x 3072), they would still scan it at 72 dpi.
Supplier No. 2: They tell me that in order to have a high quality image made from a photographic slide (starting with a 35 mm slide, in all cases), I need to have a “1280 pixel dimension slide, a JPEG, at 300 dpi, that is 8 MB per image.” However, this supplier also offers, on its list of services, a “Standard Resolution JPEG (4MB file/image – 3088 x 2048), as well as a “High Resolution JPEG (8 MB file/image – 3088x2048).
I will be presenting my Keynotes with my MacBook Pro, and will not have a chance to try out the presentations in advance, since the lecture location is far from my home, so that is not an option.
I do not want to use up more memory than necessary on my laptop. I also want to have the best quality image.
One more question: When scanning images myself, on my own scanner, for my Keynote presentations, would I be better off scanning them as JPEGs or TIFFs? I have been told that a TIFF is better because it is less compressed.
Any enlightenment on this subject would be appreciated.
Thank you.

When it comes to Keynote, I try and start with a presentation that's 1680 x 1050 preset or something in that range. Most projectors that you'll get at a conference won't project much higher than that and if they run at a lower resolution, it's better to have the device downsize your Keynote. Anything is better than having the projector try and upsize your presentation... you work hard to make it look good, and it's mangled by some tired Epson projector.
As far as slides go, scan them in at 150 dpi or better, and make them at least the dimensions of your presentation. Keynote is really only wanting 72dpi, but I do them at 150, just in case I need to print out the presentation as a handout later, and having the pix at 150 dpi gives me a little help with their quality on a printer.
You'd probably have to drop in the 150 versions again if you output the Keynote to .pdf or Word or something, but at least you have the option.
And Gary's right (above) go ahead and scan them as TIFFs. Sooner or later you'll want to do something else with these slides (like make something for an iPad or the like) and having them as TIFFs keeps your presentation looking good.
Finally, and this is a big one, get to the location for your presentation ahead of time if you can, and plug the laptop in and see what you get. There's always connection problems. Don't let the AV bonehead tell you everything will work just fine ('... I don't have any adapters for a Mac...') . See it for yourself... you're the one that's standing up there. Unless it's your boss, then you better be really sure it works.

Is it possible to create a word doc or excel in iPad Air

Is it possible to create a word doc or excel in iPad Air? Also is it possible to open or transfer documents from my computer to my iPad?

Abu1 wrote:
Is it possible to create a word doc or excel in iPad Air?
Yes. you will need the appropriate apps to do that. some options:
Apple's Pages and Number. These will create documents in their respective native formats, but can be exported in Word or Excel (among others) as needed. They will also import from those formats (with limitations)
MS has published Word and Excel fort the iPad, but in order to create of edit files, you need an Office 365 subscription ($99 USD per year, I believe)
There are a number of other apps available in the apps store that will also accomplish this for you.
Just be aware that regardless of the apps chosen, there will be limitations compared to Word and Exel for PC (I don't know of any app for iOs that can handle pivot tables, for example)
Abu1 wrote:
Also is it possible to open or transfer documents from my computer to my iPad?
Yes, several options, including syncing via itunes. However, you may fiond using a cloud service is more convenient. What you chose will depend on teh editing apps you use.I use DropBox and Box externsively, as well as iCloud (if you opt for Apple's apps). Skydrive would be your best option if you use MS apps.

I need to uninstall downloaded version of Elements 12 on a computer, then install Elements 12 on the same computer directly from a disk. Elements 11 was previously used on same computer, and the albums and library had been moved to the first installation

I need to uninstall downloaded version of Elements 12 on a computer, then install Elements 12 on the same computer directly from a disk. Elements 11 was previously used on same computer, and the albums and library had been moved to the first installation of 12, which I am removing. How do I correctly unstall the old Elements 12, and install the new elements 12 from disk, and retain all albums and libraries from the old Elements 12?

You're welcome. It was not an answer, it was a question, and it could lead to being helpful if you explain why you think you need to uninstall.
As far as uninstalling goes, you will uninstall it like you do for any program, which depends on what kind of operating system you have. If you wish to retain albums and whatnot, maybe the following link can provide some guidance.
Photoshop Elements Help / Use Backup, Restore to move catalog | Organizer | Elements 6 or later
http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html#ma in_Special_notes_if_you_restore_a_catalog_from_a_previous_version_of_Photoshop_Elements

I have problem in restoring my iphone. I broke the iphone contract in USA and came to India. I got steps to unlock in a mail and i followed those steps. When i try to restore using itunes then it always says some message like "turn off find my phone."

I have problem in restoring my iphone. I broke the iphone contract in USA and came to India. I got steps to unlock in a mail and i followed those steps. When i try to restore using itunes then it always says some message like "turn off find my phone." How can i get rid of this message.

You can access iCloud.com on a computer to turn it off.
http://support.apple.com/kb/PH2702
Note:
The Apple ID and Password that was Originally used to Activate the iDevice is required
If you do not have that information you will not be able to use the Device.
Activation Lock in iOS 7 > http://support.apple.com/kb/HT5818

My iphone 4s doesnt have the slide option to turn on mirror on apple tv...after ive double clicked the button and scrolled left twice, i see the symbol and click into it but theres no mirror option??

my iphone 4s doesnt have the slide option to turn on mirror on apple tv...after ive double clicked the button and scrolled left twice, i see the symbol and click into it but theres no mirror option??

is the latests ios version installed?
if so then are you 100% sure you have an iphone4s because if you have an iphone4 it would be absent because Iphone4 don't support it
mind you iphone4 are still being sold

I have realised over time I have created multiple accounts. I have bought music on my iphone and am not able to locate the account that I made most of my purchases on. I have bank statements on the purchases but don't know how to contact someone to help.

I have realised over time I have created multiple accounts. I have bought music on my Iphone and am not able to locate the account that I made most of my purchases on. I have bank statements on the purchases but don't know how to contact someone in Itune to help me. PLEASE

I don't have the app adn no expereince with it, but it appears basec on teh app description you may need it installed on your MAC as well to download the files.
You might find help on the vendors website: http://www.nfinityinc.com/index.html

I upgraded itunes since a pop up stated that I would have to upgrade it so it can recognize my iphone5's new software. I upgraded the itunes and now when I plug in the iphone its asking "set up as new iphone" will this delete everything on my phone?

I upgraded itunes since a pop up stated that I would have to upgrade it so it can recognize my iphone5's new software. I upgraded the itunes and now when I plug in the iphone its asking "set up as new iphone" will this delete everything on my phone? Also why is it forcing me to set up as a new iphone, why doesn't it recognize it like it did before I upgraded iTunes. I'm afaid I will lose all my apps, music, pictures etc. please help. thank you.

You are correct. Corrupted files are in the backup. If you've already restored the iPhone it has been erased and starting over is the way to go in order to eliminate the corrupted files.
Hope that helps

Export PDF converts filled PDF form without the data - Turns filled PDF form onto blank Word doc. Is there a solution to this or did Adobe just sell me a service that doesn't work?

Export PDF converts filled PDF form without the data - Turns filled PDF form onto blank Word doc. Is there a solution to this or did Adobe just sell me a service that doesn't work?

ExportPDF is not for forms. In general, converting forms to Word is a really, really bad idea which can even cause legal problems. Work with the form as a PDF. Acrobat (not Reader) can export form data as simple text for example.

HT1176 My airport TM will not backup and i keep getting the error msg "Time Machine couldn't complete the backup...An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

My Airport TM will not backup and i keep getting the error msg "Time Machine couldn’t complete the backup...An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

My Airport TM will not backup and i keep getting the error msg "Time Machine couldn’t complete the backup...An error occurred while copying files. The problem may be temporary. If the problem persists, use Disk Utility to repair your backup disk."

I have an agreement form created in word doc. i want to hire some one experience with formscentral to recreate the form and user be able to complete the agreement, sign it electronically (using echosign) then click submit. i will be alert of new response.

Similar Messages

Maybe you are looking for