Anybody experience with SAP Reliable Messaging (SAP-RM) from BizTalk?

Experience with SAP Reliable Messaging (SAP-RM) from BizTalk?
Has anyone experience with using SAP Reliable Messaging (SAP-RM) between BizTalk and SAP’s Enterprise Services?
SAP’s Enterprise Services can be synchronous request/reply, what SAP calls A2X.  But many of SAP’s Enterprise Services are one-way, asynchronous. When not using SAP’s own integration solution (SAP Process Integration), SAP refers
to the use of either WS-ReliableMessaging (WS-RM) or SAP ReliableMessaging (SAP-RM). With BizTalk not supporting WS-ReliableMessaging (and not its persistent version), SAP-RM is the way to go.
More info about “SAP-RM” @ http://wiki.scn.sap.com/wiki/display/ABAPConn/Plain+SOAP
Koen

I have searched, but didn't find any resources related with SAP Reliable Messaging (SAP-RM) from BizTalk, only found the resources about Web Services Reliable Messaging. I hope it will help you.
http://help.sap.com/saphelp_nw04s/helpdata/en/46/9743916d1115ece10000000a114a6b/content.htm
http://integr8consulting.blogspot.in/2013/11/ws-reliablemessaging-ws-rm-between-ibm.html
http://scn.sap.com/thread/798701

Similar Messages

  • SAP SNC Supplier Network Collaboration integration with SAP ERP via BizTalk - experiences?

    Hello,
    had anybody experience in integration of SAP SNC Supplier Network  Collaboration with SAP ERP via BizTalk Server?
    Versions: SAP ECC 6.0 Ehp5 SPS11, SAP SNC  current version (7.0?)
    We will have to integrate following processes:
    Master Data integration, PO Purchase Order, Forecast, SMI Supplier Managed Inventory
    Usually SAP takes an SAP PI middleware for this, where the full implementation can be downloaded from the SAP marketplace, but we want to avoid having an additional Integration Platform with maintenance etc.
    Are there experiences, success stories, pitfalls, issues to be known, recommendations, known efforts in this forum?
    Thanks in advance.
    Jens

    HI Jens,
    In our forum, we discussed topic about BizTalk & SAP Integration before, hope it helps you.BizTalk
    & SAP Integration
    Best regards,
    Angie
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Has anybody experience with "Cisco Anomaly Guard Module"

    Hello,
    had anybody experience with "Cisco Anomaly Guard Module" WS-SVC-AGM-1-K9 for Catalyst 6500?
    We're looking for some IDS/IPS prevention system which could take 2-3 Gbits of traffic. From the documentation it looks not bad, and we can get them as used parts (6500 + Sup720 + AGM +ADM) quite cheap. The second solution is Arbor with cisco12000 as boader router (10Gbit uplink) is much more expencevie.
    Arbor tries of cause sell us their solution as "Cisco Anomaly Guard Module" is ot of sale and doesn't have any new features, but from the Data sheets Cisco AGM is eactly what we need.
    Or may be is there another solution which could be comparable to those two?
    Thank you.

    Hello padatta,
    AGM/ADM are IDS/IPS systems, one can of couse discuss about the terms, but it won't be productive :).
    IDSM2 has not enough performance and it should sit inline, ADM/AGM can change he next hop for the diverted traffic and be out of traffic path during the normal operation.
    Konstantin

  • Anybody experience with Mac Leopard or Tiger on Equium A210-17I

    Has anybody experience with Mac Leopard or Tiger on an AMD Toshiba? I read about some folks installing it on AMD and Intel and wondered how it could feel and work on an Equium. I have A210 17l.
    Thanks for your input.

    It seems to be that you are alone with this idea. If you will try it in the future please post a little bit about it.
    Good luck!

  • Anybody experience with creating timelag function with FOX?

    Dear All,
    As can be seen from my former thread Katie announces that financial functions are not moved to IP. And nowadays these aren't available in BW-BPS either.
    I'm just wondering if anybody has experience with creating financial unctions like timelag, allocation, IRR, accumulated balances etc in FOX?
    And if so, how complicated is this. Any examples would be most appreciated.
    Kind regards, Harjan

    Hi Hatter,
    thanks for the answer.
    But what do you think about the ICY DOCK?
    If you only want to use two drives, OWC has a nice
    $67 dual drive black metal case.
    I don't think that it is fast enough. Check the parameters:
    "Maximum Data Transfer Rate: 1.5Gb/s (or 100MB/sec)"
    Or FirmTek with a
    much better $199 case with 3-speed fan for best
    cooling.
    Yes. This is fine. Here there is:
    "High-performance storage data transfer up to 3.0Gbps (300MB/sec) per drive"
    But what about this ICY DOCK? Although I know that it is not the most important part when we are talking about RAID disks, but this enclosure looks really nice. Will it work as good as it looks like?
    PS: beware of anyone calling a device "hardware RAID"
    when all it does is use an Oxford bridge.
    How do you know that there is used an Oxford bridge, and why it work bad (as I suppose)?
    Marek.

  • Reliable messaging between XI and BizTalk using SOAP

    I came across this document describing how reliable messaging between XI and BTS can be implemented using the SOAP extensions. This document has been authored by
    - André Fischer, Project Manager CTSC, SAP AG
    - Matthias Allgaier, Consultant XI, SAP Deutschland AG & Co.
    - KG Jürgen Daiberl, SAP Program Manager CTSC, Microsoft Corporation
    Does anyone know if the prototype code is available for download from SDN or elsewhere? A search on SDN did not produce any results...
    Thanks.
    - KishenM

    Larry,
    Let me see if I understood this - You need to use the SOAP adapter to integrate with BizLink. Bizlink Provides its own SOAP Header and hence you are not sure how to do this.
    Got a few questions,
    1. Has Bizlink given you a XSD / WSDL. Does this have the entire SOAP Payload including the SOAP Header and SOAP body? If yes, create the mapping as needed and instead of the SOAP adapter use the HTTP adapter or use the SOAP adapter and in the SOAP adapter select option Do Not Use SOAP Envelope.
    2. If you do not have a XSD that contains the entire SOAP Enevelope - SOAP header and body then use XSL or Java Mapping that creates this output structure and use the SOAP adapter with the DoNotuseSOAP Envelope option or the HTTP adapter.
    The SOAP adapter in the DONotUseSOAP Emvelope mode basically becomes a http adapter.
    Regards
    Bhavesh

  • Awful Experience with Delivery and Installation of Appliances from BBY

    I went to the Best But in College Park, MD on 02 March 2015 with the intention of buying an appliance suite (refrigerator, range, and dish washer). A sales associated assisted me promptly upon entering the store, and I let him know what I needed to purchase and that I would need delivery, installation, and haul away for all three items. He stated that the delivery, installation, and haul away was included with the price of all three items, and we scheduled my initial delivery date for 13 March 2015.
    The evening before my delivery, 12 March 2015, I got a call from the Geek Squad giving me a three hour window they would be there to deliver and install my items. In going over the order with the representative I asked if the same crew dropping off the appliances would be installing the plumbing for the dishwasher. Contrary to what I was told in the store at the time of purchase, the representative on the phone notified me that a dishwasher installation was not sold to me and the following day the only thing the crew would be doing is dropping off the dishwasher. She then instructed me to call the store to see if there was any adjustments that could be made that would not change my delivery date the following day.
    So, I call the store and explain what is going on to the representative in customer service. He instructs me that he cannot add the installation on to the order for the next day because the route has already been made and the warehouse told him its too late to change. So, instead he, in conjunction with his manager, said he can add the dishwasher install for a later date that I was available, but the delivery of the range and the refrigerator would remain for the following date. After about 45 minutes we work through the kinks and he lets me know he will call me back the following day to give me a solidified date and time that the dishwasher can be installed.
    So, the following day comes and the time frame for my delivery and installation of the range and refrigerator comes and goes without hearing a word from Best But or the Geek Squad. So, I call customer service and the rep I'm speaking with lets me know that whatever the in-store rep did over the phone the following night put the entire order into reschedule and nothing would be delivered to me that day. Imagine my frustration because I've taken off from work to take possession of appliances that AREN'T GOING TO SHOW UP. Immediately, I hang up with customer service and go into the store where I originally purchased the appliances. I was told it did in fact get pushed into reschedule and my only option was to reschedule the delivery AGAIN. After working with both the rep and the General Manager in-store I was able to get the delivery rescheduled for 23 March 2015 with the dishwasher installation added to the order for free since it was an error caused by a Best Buy employee.
    On 21 March 2015, I got the calls from the automated system giving me my three hour window the installers would be there on the 23rd of March to install my items. On 23 March 2015, the crew with the refrigerator and the range showed up first. They asked me to come to the truck upon arrival because there was some issue with the refrigerator and they wanted me to see it before they unloaded it and brought it up to my home. The refrigerator of course shows up badly dented on the door, so I refuse it because I haven't gone through all of this to take possession of a damaged product. The delivery man let me know that if I did take possession of it, they would offer me some discounts because it was damaged. I said no thanks and he called customer service for me to speak with a woman at the warehouse about the damaged product. The woman at the warehouse said she was going to check their inventory and call me back within a few moments to reschedule a new unit to be sent out. They install the range without an issue. Next, the dishwasher team shows up and that goes off without a hitch. Of course, I didn't hear back from anyone at the warehouse at all that evening to reschedule the delivery of a new refrigerator.
    All in all, this has been a HORRIBLE experience with Best Buy. As a loyal Elite Status Rewards Zone customer and a former employee of the Best Buy in College Park, MD, I can say after this appliance experience, Best But has lost a lifelong customer. The level of customer service I received was sub-par and their attempts to correct an issue that started with their employee giving me improper information about installation being included in the price of all the appliances made the situation worse. I ended up returning the refrigerator because I refuse to wait any longer or go through anymore drama in order to take possession of something I paid for twenty days ago and can't receive because of Best Buy's inability to get their act together. I ended up purchasing a refrigerator from Sears immediately after cancelling my order for the one from Best Buy and it was delivered next day and damage free.

    Hello canbro34,
    The purchase and delivery of new appliances should be exciting and fun and not result in the kinds of tribulations that you describe. Our representatives should ensure that you have everything you need for a successful delivery and installation and I was surprised to read that the did not. I apologize for your having to cope with this frustrating experience.
    I was gratified to read that the store's general manager was able to work with you to help assuage some of the problems that were created. It was regrettable that the refrigerator arrived damaged, but I was happy to hear that the delivery and installation of the other appliances went smoothly.
    Although I understand your reasons, I was dismayed to read that you elected to purchase your refrigerator from a competitor and that this experience may influence your future shopping destination. It is my hope that you will give Best Buy another chance one day soon.
    Please know that I am sincerely grateful that you took the time to share your experience with us.
    Sincerely,
    John|Social Media Specialist | Best Buy® Corporate
     Private Message

  • Unified Job Monitoring -Share your experiences with SAP Solution Manager 7.1

    Dear Forum members,
    I woudl like to introduce myself as Raghav, S. I am in the development team responsible for building the unified job monitoring workcenter starting 7.1 SP10 (onwards).
    Please post your feedback, current status wrt to setup, commmon issues in this area.
    I will be more than glad to help you here.
    Regards, Raghav
    Development Manager
    CLM - Solution manager team, Labs India.

    Hello Raghev,
    we implemented unfied job monitoring on a larger scale by now, starting out with the monitoring of SAP Standard & Reorg Jobs.
    Everything seemed quiet OK at the beginning, but over time display performance of the Monitoring UI decreased drastically (exceeding 5 Min. "per click" in the UI).
    I pinned this down to the following (Oracle) SQL access:
      SELECT
      "CLIENT", "CONTEXT_ID", "TYPE_ID", "HASH_METRIC_PATH", "START_TIMESTAMP", "IS_CURRENT", "END_TIMESTAMP",
      "METRIC_PATH", "RATING_AGGREGATE", "VALUE_MIN", "VALUE_MAX", "VALUE_SUM", "VALUE_COUNT", "VALUE_LAST",
      "VALUE_DATA_TYPE", "VALUE_MAX_TIME", "LAST_TEXT"
    FROM
      "MES_DB_AGGREGATE"
    WHERE
      "CLIENT"=:A0 AND "CONTEXT_ID"=:A1 AND "TYPE_ID"=:A2 AND "IS_CURRENT"=:A3 OR "CLIENT"=:A4 AND
      "CONTEXT_ID"=:A5 AND "TYPE_ID"=:A6 AND "IS_CURRENT"=:A7 OR "CLIENT"=:A8 AND "CONTEXT_ID"=:A9 AND
      "TYPE_ID"=:A10 AND "IS_CURRENT"=:A11 OR "CLIENT"=:A12 AND "CONTEXT_ID"=:A13 AND "TYPE_ID"=:A14 AND
      "IS_CURRENT"=:A15 OR "CLIENT"=:A16 AND "CONTEXT_ID"=:A17 AND "TYPE_ID"=:A18 AND "IS_CURRENT"=:A19
    The execution plan used for this SQL is:
    0
    SELECT STATEMENT
    1
    INLIST ITERATOR      
    2  
    TABLE ACCESS BY INDEX ROWID MES_DB_AGGREGATE
    3    
    INDEX RANGE SCAN  MES_DB_AGGREGATECU
    MES_DB_AGGREGATE in our case has over 5 million entries.
    The parameterization of the DB incl. Memory and all should be OK.
    The index range scan simply takes that long.
    This might be, because the MES_DB_AGGREGATECU index has the lowest cardinality column (CLIENT) first.
    Header 1
    Header 2
    COLUMN_NAME
    NUM_DISTINCT
    CLIENT
    1
    CONTEXT_ID
    433
    TYPE_ID
    2192
    IS_CURRENT
    2
    Could you have your team check on this, because with the situation as is, the Job Monitoring application seemingly becomes non-usable, as soon, as you start to scale up.
    Best Regards,
    Thorsten

  • Pre-fill Office documents with SAP data from WebDynPro screens

    I have a requirement to have Word/Excel type file templates that we can open and have pre-filled with data attributes from SAP objects.
    I know that we can do this relatively easily from within the SAP GUI in transactions such as SCASE etc... but our solution needs to have this type of functionality invoked from WebDynPro screens that are delivered through the Portal.
    We have looked at Adobe Document Services which will give us the fucntionality as described, but because of licencing constraints we are unable to use ADS at this stage.
    Does anyone have any knowledge or ideas on how we may achieve pre-filling of Word templates etc. from WebDynPro screens?

    Paul,
      Did you figure out how to do this? We have a very similar requirement now. Appreciate any suggestions you may have.
    Thanks
    Madhu

  • Anybody experience with FCP X and Macbook pro 15inch 2.2?

    My old mid 2009 macbook harddrive died on me today, and I'm thinking to upgrade. Sell the old one and buy the new 2011 2.2. The old one was slow in rendering and had lots and lots and lots of spinning beachballs. Was I pushing it too hard? Don't know, but it was horrible. I lost so much time.
    Anyway, does anybody have this combo fcp x and the new 15inch macbook pro with the 1gig card and what are your findings??
    Thanks
    Peter

    I've got a 2011/2.2/8GB/6750 running FCPX. Once I troubleshooted my external HDs (a Drobo that was nearly full with Time Machine backups was slowing down the entire Firewire bus) things run a lot better. I'm currently storing video on a Promise Pegasus R4 Thunderbolt RAID and the entire system is pretty snappy. The only slowdowns are:
    1. clips, events, and projects on slower hard drives can slow down launching the app and screen refreshes
    2. FCPX is still flakey. It will run great for a whole day and then will refuse to launch the next morning.
    3. exporting through Compressor is slow, particularly when I'm under deadline! 10 minute HD segments can take an hour or so. The Activity Monitor shows the CPUs maxed out, so I suspect that's the bottleneck. I've tried setting up distributed rendering but it doesn't work quite yet.
    4. FCPX can be a RAM hog, so if you're a rabid multi-tasker like me, prepare to beachball or change your wicked ways.
    All in all, FCPX runs pretty well on my MBP. If video editing was my main line of business, I'd seriously consider a Mac Pro stuffed with RAM and as many cores as I can find. I might wait for a newer one with Thunderbolt though for a bit of future-proofing.
    Hope this helps...

  • Can anybody help with this error message

    I work with CS5.6 on RAW pictures shot with a Canon EOS 5 Mk II and have problems saving. Mycomputer is 32-bit with 4 Gb RAM, Windows 7. 
    Die Error Message in Adobe CS5.6 ist: „ could not complete the SAVE AS command because there is not enough memory (RAM)”

    Its saying exactly what it means you do not have enough memory to save the file. You can either change the properties to save a smaller image
    Or update your computer. In order to use the entire 4GB of RAM your computer needs to be 64bit not 32. 32bit can only access 2GB of ram and some apps can access an additional GB of ram. But if you do upgrade your computer get 6 or 8 GB of Ram, you will be happy you did.

  • Anybody experience with increasing barcode size on form?

    We are printing an SU Label form with a barcode. The SU Label is a WM sapscript form. I've been trying to size up the barcode as large as possible to get our scanner to read it at least 30 feet. In SE73, my print control is currently set to:
    \e(s4p100h220v55,165b55,165s24704T
    This gets us to around 20 feet before it can no longer be scanned. I'm wondering if anybody has insight into anything that can be done to improve the barcode readability at a larger size?
    Thanks, Vlad

    The size of a barcode is determined by the printer escape sequence,
    which is sent to the printer to switch on the barcode.
    Please go to transaction:
    SE73 -> 'Printer Barcodes' -> Select your 'Device Type'
         -> You get a list of the barcodes, which the device  type is able
            to print. On the right side you see the names of two print
            controls: A prefix to switch on the bar code (SBP...) and a
            suffix to switch off the bar code (SBS...)
         -> Highlight the print control name with the cursor and press the
            'Displ. print control' button.
         -> You should now see the printer escape sequence that tells the
            printer to start the barcode.
    This sequence selects amongst other things  the type and size of the
    barcode.
    To get another barcode size, it is required to change this sequence.
    Please copy the device type to another name before changing:
    SPAD -> Utilities -> For device types -> Copy device type.
    If you use a Jetcaps barcode SIMM, the attached Note 45643 explains the
    sequences. Otherwise your printer manual should be able to help you.
    Overall width cannot be changed, have to change width of bars and
    spaces.
    Regards.

  • Has anybody experience with those enclosures?

    Hi,
    I found 2 interesting enclosures for creating RAID using SATA disks.
    But I didn't have any of them in my hand.
    So, has anyone tested one or both of them?
    The first one:
    http://eshop.macsales.com/item/Icy%20Dock/MB561S4S/
    - seems to be a software RAID
    The second:
    http://www.thecus.com/products_over.php?cid=1&pid=3
    - it's a hardware RAID. Looks very nice.
    I wonder how they work with 2 drives inside (the Icy Dock with 2 or 4 drives), what data transfer I can get, etc.
    Marek.

    Hi Hatter,
    thanks for the answer.
    But what do you think about the ICY DOCK?
    If you only want to use two drives, OWC has a nice
    $67 dual drive black metal case.
    I don't think that it is fast enough. Check the parameters:
    "Maximum Data Transfer Rate: 1.5Gb/s (or 100MB/sec)"
    Or FirmTek with a
    much better $199 case with 3-speed fan for best
    cooling.
    Yes. This is fine. Here there is:
    "High-performance storage data transfer up to 3.0Gbps (300MB/sec) per drive"
    But what about this ICY DOCK? Although I know that it is not the most important part when we are talking about RAID disks, but this enclosure looks really nice. Will it work as good as it looks like?
    PS: beware of anyone calling a device "hardware RAID"
    when all it does is use an Oxford bridge.
    How do you know that there is used an Oxford bridge, and why it work bad (as I suppose)?
    Marek.

  • Has anybody experience with the application "MacKeeper"

    The Qustion ist over there
    thanks for help

    This guy keeps on top of how to uninstall this malware
    http://applehelpwriter.wordpress.com/2011/09/21/how-to-uninstall-mackeeper-malwa re/

  • Experience with trying to solve the problems from 2007-001 update

    I am on a C2D iMac running 10.4.8, Airport card connecting to Buffalo Airstation.
    Just to share what I've done yesterday
    1. Did the archive and re-install OS X thing.
    2. Updated firmware up to the point right before 2007-001 update (used ethernet cable to download, otherwise it would have taken forever.)
    Result - connection doesn't drop any more, but wireless transmission speed is really slow.
    3. Went into the Buffalo Airstaion config and changed the wireless channel.
    Result - for about 5 minutes the transmission became as fast as my Core Duo MacBook on wireless (can do ~100kbps on file downloads etc.), and then it became slow again.
    I will continue to try changing the channel sporadically over the next few days, but increasingly I'm starting to feel I shouldn't bother. I'm connecting via ethernet cable now, it's much faster (even when compared to when the wireless connection was at 100%). "All" that I have to live with now is the ugly cable being strewn around the house.
    Be that as it may, I'm still pretty disappointed by the whole experience.

    Hey anoblegee,
    If you are having issues with connecting to your wireless router, then the first thing I would check is the settings on the router to make sure they are using the recommended set up. Take a look at that and also the troubleshooting Wi-Fi articles for both Mac and iOS devices. 
    iOS and OS X: Recommended settings for Wi-Fi routers and access points
    http://support.apple.com/en-us/HT202068
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    http://support.apple.com/en-us/HT202222
    iOS: Troubleshooting Wi-Fi networks and connections
    http://support.apple.com/en-us/TS1398
    Hope this helps,
    -Norm G. 

Maybe you are looking for