AnyConnect Android 4.4 (KitKat) Compatibility Update (CSCul28340)

Due to a bug in Android 4.4 (KitKat) reported to Google under Issue #61948, AnyConnect users will experience High Packet Loss over their VPN connection (users will experience timeouts when attempting to access certain network resources). In the ASA logs, a syslog message will appear with text similar to "Transmitting large packet 1420 (threshold 1405)."
This has been reported to Google under Issue #61948
Android 4.4 TCP advertises incorrect MSS over VPN (using VpnService)
https://code.google.com/p/android/issues/detail?id=61948
End users may log in with their Google ID and flag the importance of the request as well as enter comments at the link above.
Conditions:
Android 4.4 (KitKat) including the Google Nexus 5
AnyConnect ICS+
Workaround:
Until Google produces a fix for Android 4.4, VPN administrators may temporarily reduce the maximum segment size for TCP connections on the ASA with the configuration command "sysopt connection tcpmss <mss size>". The default for this parameter is 1380 bytes. Reduce this value by the difference between the values seen in the ASA logs. In the above example, the difference is 15 bytes; the value should thus be no more than 1365. Reducing this value will negatively impact performance for connected VPN users where large packets are transmitted.

Critical issue with DNS resolution on KitKat (4.4.2).
AnyConnect Version 3.0.09242
on Nexus 4
running KitKat (4.4.2).
Firewall config has split-tunnel.
When connected, we CAN reach internal resources but when connected we CANNOT reach external resources.
Ran sniffer to find that DNS requests are having internal DNS search domain appended.
When executing on device:
     $ ping google.com
     ping: unknown host google.com
The sniffer shows:
a faulty DNS lookup for "google.com.example.com" which seems to be appending our search domains to all DNS lookups.
     11:53:45.892635 IP 192.168.124.101.62994 > 192.168.170.133.53: 43772+ A? google.com.example.com.
This problem DOES NOT happen when using KitKat (4.4.2) native IPSec VPN with the same firewall group policy and split-tunnel configuration.
This problem DOES NOT happen for 4.3 (Samsung Galaxy S3) using the same AnyConnect client.

Similar Messages

  • AnyConnect Android 4.3.1 Compatibility Update

    AnyConnect Android 4.3.1 Compatibility Update - We are pleased to announce that the DNS resolution issue impacting Android 4.3.1 (Note III/Galaxy S4/etc updates) has been resolved in AnyConnect 3.0.09242 which will be available over the next few hours from Google Play. T-Mobile users should pay attention to the workaround noted in the Release Notes.
    Android 4.4 cannot be supported without the workaround noted in release notes due to a bug in Android 4.4 (Google ID#61948).
    HTC One users who have received the initial Android 4.3 update may find themselves unable to utilize the "HTC AnyConnect" package. HTC is actively pushing out updates to resolve this incompatibility, but we have been told that the fix for AT&T will take longer. In the meantime, end users impacted by this may uninstall "HTC AnyConnect" and install "AnyConnect ICS+".

    i am using iphone i bought from TW.
    however, the thing is there is no such button in either under the setting->general-> network or under the setting. That's what i was wondering why there is no such button exist after my 4.3.1 update

  • About android 4.4 kitkat

    HI just wanted to know that will sony Xperia tx receive android 4.4 kitkat or android 4.3 is the last update???

    Here you go 
    http://www.sonymobile.com/global-en/software/phones/xperia-tx/
    "I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

  • Android 4.4 Kitkat - Nexus 5 Skype issue

    Hi Guys
    I am trying to login to skype on my new Nexus 5 with Android 4.4 Kitkat and login screen keep coming again and again , any one has any idea or facing the same ?
    Solved!
    Go to Solution.

    Same for me, right out the box flat doesn't work with either of my microsoft accounts.
    Uninstalled and reinstalled same issue.
    Must say the HTC one X I came from I had to wait forever for a update to let me login and I find it laughable that it is broken now on 4.4.
    Does nobody test these things it is even preinstalled on the new Nexus 5 

  • Blue Screen of Death After RAW Compatibility Update

    My friend updated her 13" Black MacBook yesterday, specifically the "Digital Camera Raw Compatibility Update 2.3". After a reboot, she got the Apple "Blue Screen of Death", with no login window showing. Looking at system.log, there's a section that looks to be the culprit (this began after restarting due to the install of the update):
    Nov 7 13:55:29 Philbert /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[31]: Login Window Application Started
    Nov 7 13:55:30 Philbert /usr/sbin/ocspd[53]: starting
    Nov 7 13:55:35 Philbert kernel[0]: display: Not usable
    Nov 7 13:55:35 Philbert com.apple.launchd[1] (com.apple.WindowServer[50]): Exited abnormally: Hangup
    Nov 7 13:55:35 Philbert com.apple.launchd[1] (com.apple.WindowServer): Throttling respawn: Will start in 6 seconds
    Nov 7 13:55:42 Philbert com.apple.launchd[1] (com.apple.WindowServer[64]): Exited abnormally: Hangup
    Nov 7 13:55:42 Philbert com.apple.launchd[1] (com.apple.WindowServer): Throttling respawn: Will start in 10 seconds
    Nov 7 13:55:52 Philbert com.apple.launchd[1] (com.apple.WindowServer[67]): Exited abnormally: Hangup
    Nov 7 13:55:52 Philbert com.apple.launchd[1] (com.apple.WindowServer): Throttling respawn: Will start in 10 seconds
    Nov 7 13:56:02 Philbert com.apple.launchd[1] (com.apple.WindowServer[70]): Exited abnormally: Hangup
    Here are some things I've observed/tried, many from sources via the Internet:
    - I'm able to login in single-user mode
    - I'm not able to login in Safe Mode (hangs on white screen with Apple logo)
    - I've tried booting off the 10.5 install DVD and running Disk Utility - verify/repair disk, this comes back ok. However, if I try to verify/repair permissions, it runs for about 10 - 20 mins then freezes. I let the frozen process run overnight (10-12 hours) and no feedback. I can move the mouse, but I cannot select anything.
    - When the laptop is booted and on the blue screen, I can connect to it via AFP
    - I've tried manually changing the permissions of "/", by doing - chmod 775 /; chmod 1775 /;
    - I've tried removing the com.apple.WindowServer.plist and com.apple.loginscreen.plist files in case they were corrupted by the update
    - I tried running the "installer" command to re-install the update package from the command line. I run it with the "verbose" flags, I get no output and the process hangs.
    Since I can connect via AFP I figure I'll be backing the data up and re-installing OS X. Pretty lame though, considering this failure was caused by running a Software Update. Anyone have a last minute suggestion for me before I go down that path?
    I have the full system.log if anyone is curious!
    Cheers!

    i don't think this is a router issue...i believe it's a hardware issue...this error occured when computer is not getting sufficient memory, drivers are not installed correctly or due to invalid driver installation of any devices installed on the computer...to just isolate the problem try connecting computer directly to the modem and check are you are getting a same error message or not and let me know.

  • Digital Camera RAW Compatibility Update 3.12 and later can not be installed on OSX 10.6.8.

    Hi
    I bought a new Canon EOS 5D mark 3 and noticed that my MacBook Pro with OSX 10.6.8 can not handle the new raw files.
    Searching google shown that I need Digital Camera RAW Compatibility Update 3.12 or later.
    So I tried with 3.12, 3.13 and 3.14, but all failed during installation with error: "Dieses Update unterstützt nur Aperture 3 und iPhoto 9."
    Hmmm
    Checking iPhoto ...
    About IPHOT shows "Iphoto '09 version 8.1.2 (424)"
    So I've updated Iphoto with version 9.2.1 (which I found matching my OSX after stepping down from highest version down ..... Apple is here not really supporting users here .......)
    Unfortunately this is only an update.
    So I need to install first a newer Iphoto version.
    Iphoto 11 I can buy in the app store, but I can not install it on OS/X 10.6.8 .....
    Lost!
    How do I get my raw files of 5Dm3 visible in OSX 10.6.8 ???????
    Any help welcome
    Thx
    Wolfgang

    I maintain up to date my system, yet I have from time to time when I take RAW picture issues in iPhoto not reading them.  Today, looking for another issue I came across this update and I was hopping it would resolve my issues with the RAW photos from my Pentax K-30.
    The error:
    Installer quit unexpectedly.
    Click Reopen to open the app again. Click Report to see more detail information and send to Apple.
    Backtrace not available
    Unknown thread crashed with X86 Thread State (32-bit):
      eax: 0x00000055  ebx: 0x00000000  ecx: 0x00000000  edx: 0x00000000
      edi: 0x00000000  esi: 0x00000000  ebp: 0x00000000  esp: 0x00000000
       ss: 0x0000001f  efl: 0x00010203  eip: 0x8fe01030   cs: 0x00000017
       ds: 0x0000001f   es: 0x0000001f   fs: 0x00000000   gs: 0x00000000
      cr2: 0xfffffffc
    Binary images description not available...
    This laptop cannot be upgraded further without hindering its performance.  Hence, I need to keep the version of iPhoto that I currently have.
    Thank you for your response.

  • HT201070 I currently use OS 10.6.8 and Aperture 3, and just got a Nikon D600. It seems the the RAW Compatibility updates (4.01) are for use only with OS 10.7.5 or later, is that right? Do I need to update my whole OS to use this camera? Thank you!

    I currently use OS 10.6.8 and Aperture 3, and just got a Nikon D600. It seems the the RAW Compatibility updates (4.01) are for use only with OS 10.7.5 or later, is that right? Do I need to update my whole OS to use this camera? Thank you!

    Thanks to Bobthefisherman & Turbostar.  Turns out I've got a corrupted disk (which I found out via "verify disk" on Disk Utility First Aid.  Previously, I never thought to verify disk -- only to repair permissions -- so I never knew my HD had been corrupted.
    Wasn't able to do a clean install of OSX10.6 because my SuperDrive only sporadically will load discs, so I am taking it to the Apple Store to see if they can do a clean install, and depending upon costs, get the Superdrive replaced. 
    The HD wasn't partioned by the way.  And I did have just over 40GB of contiguous space. 
    Thanks again.

  • I just updated mavericks itunes 11.1.4 and raw camera compatibility update 5.3 and my keyboard wont work. How can i fix it?

    So I updatedmy macbook pro 15in. App store had 1 update for iTunes11.1.4 and RAW camera compatability update 5.3. Minutes after it installed my keyboard quit working. Te only way it works now is by bluetooth keyboard and mouse.  What can I do to fix this? Has anyone else had this issue?

    So I updatedmy macbook pro 15in. App store had 1 update for iTunes11.1.4 and RAW camera compatability update 5.3. Minutes after it installed my keyboard quit working. Te only way it works now is by bluetooth keyboard and mouse.  What can I do to fix this? Has anyone else had this issue?

  • Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 but when I connect my camera a message appears telling it's not compatible with the operating system?

    Canon EOS 100D is listed as compatible in Digital Camera RAW Compatibility Update 6.01 and when I have checked for software updates there are none available.  I've downloaded the Canon software, connected to my mac via the cable and followed the instructions in the manual.  Sadly I just get a message saying it's not compatible with the operating system.  I've tried inserting the memory card into the mac to and it doesn't seem to see it.  Can anyone help please?

    Camera RAW ≠ Camera driver, the RAW update is for the .CR2 canon raw image file (in your case) compatibility.
    What happens when you try to import photos using Image Capture or iPhoto?
    Can you take a screenshot of the error message?
    I always prefer and recommend using memory card import over using the camera.

  • How do I sync my Nexus 5 ( Android 4.4 Kitkat ) with iCloud ?

    How do I sync my Nexus 5 running android 4.4 kitkat with icloud. I mean the calenders, reminders etc.
    The remimders that i set on the nexus 5, I recieve on my ipod and mac....but the opposite doesnt happen unless i set it in the gmail calendar....
    How do I set up icloud email in it? cas i think thats how....

    Steve Johnson doha wrote:
    How do I sync my Nexus 5 running android 4.4 kitkat with icloud. I mean the calenders, reminders etc.
    The remimders that i set on the nexus 5, I recieve on my ipod and mac....but the opposite doesnt happen unless i set it in the gmail calendar....
    How do I set up icloud email in it? cas i think thats how....
    For Contacts and Calendars use SmoothSync (Play Store) you will need to buy both versions, one for Contacts and one for Calendars.
    Please note that iCloud has nothing to do with Google so what yu want to do won't work. iCloud mail is a standard IMAP system, consult the instructions for your phone.

  • Digital camera RAW Compatibility update 6.02 does not seem to update and keeps showing as an update to down;road. Can anyone help. Thanks. Tim

    Digital camera RAW Compatibility update 6.02 does not seem to update and keeps showing as an update to down;road. Can anyone help. Thanks. Tim

    Download it directly from Apple and apply;
    Digital Camera RAW Compatibility 6.02

  • Problem with Aperture 2 and Digital Camera Raw Compatability update 3.1

    Has anyone using Aperture 2 experienced problems with the Digital Camera Raw Compatability update 3.1. It may be purely coincidence but, since downloading this on March 3, I get the dreaded red screen and unsupported image format on my previously downloaded and edited RAW photos. I use a Pentax k-7 with which, once set up, I have had no problems until now!
    Please - any help would be very gratefully received

    That probably explains why any checks that your computer did to see if the Camera Raw update was okay to apply didn't stop it. You should probably contact Apple and explain that they broke something that was working fine previously.
    A few people have reported backing off Camera Raw 3.1 and going back to Camera Raw 3.0 for now. This note is one of the ones I've found describing how to do that, if you wish to try that. Or, you could head down the path Apple means to lead you on and upgrade to Aperture 3.
    Message was edited by: Ailish Eklof

  • Camera not in list for Digital Camera RAW Compatibility Update 3.11

    Do I need this update if my camera isn't in the list of supported cameras?

    45 views and no replies? Isn't there anyone that can answer if I need this update or not or is my question not clear? Does anyone else have a similar question relating to  the Digital Camera Raw compatibility update 3.11?

  • Is Digital Camera RAW Compatibility Update 4.06 Affecting My Drivers?

    After installing Digital Camera RAW Compatibility Update 4.06 and booted in windows 7, I can hear the windows startup sound but there is no display. After rebooting using the last good know config, I was able to login into windows but my ethernet and bluetooth are not working. In the device manager,
    Ethernet and bluetooth device status: This device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

    Maybe. I don't know. I was able to use my ethernet before the update. After the update, I am facing these driver issues. My ethernet adapter cannot be found in the list of network connections.

  • Uninstalling Digital Camera Raw Compatibility Update 3.2 (5.5MB)

    I need to uninstall Digital Camera Raw Compatibility Update 3.2 (5.5MB) file from my computer. Any help as to how I can do that???

    Hi again...
    Sorry not got a definitive answer for you, but I see no one else has responded yet... perhaps it cant be done..... I am fairly confident that there's no way you can remove a duff update through Time Machine...
    Do you have a vault back up...? Vaults will restore all your images plus all the versions you created and every adjustment you have ever made... in short... everything.... you have ever done in Aperture....
    If not.... ouch...!
    You might have to seek help from an Apple genius in your local Apple store...
    Hopefully someone here will have an answer for you..
    Hoping..... Gerry...

Maybe you are looking for

  • Error ORA-03113 when upgrading from 11.2.0.1 to 11.2.0.3

    I keep on getting this error when upgrading from 11.2.0.1 to 11.2.0.3 [Thread-57] [ 2012-04-20 13:18:28.207 CEST ] [SummarizableStep.genSummary:409]  Generating Summary for:=Pre Upgrade ,status is:=Successful [Thread-57] [ 2012-04-20 13:18:28.208 CES

  • Full screen video out

    so got a hdmi to svga adapter and works well except that video out is only long skinny bar in the middle and doenst fill the screen. Any Idea's why and if that can be changed?

  • Selective load in external table

    Hi all, I need to load data into my external table based on conditions. If i use the 'load when' im able to load the data into the table but my requirement is to load data into different columns of the same table based on the conditional "when" claus

  • Need to track Budget at WBS wrt Value & Qty both

    Dear All PS Gurus, We have specific requirement to track Budget in PS ( WBS Level ) thru material qty as well as value. Are there any work arounds or any other solutions.. Umesh Bagul

  • Reg:Multiple UOMs for same item

    Hi, How to define the multiple UOMs for same item.And the item should be converted in one UOM. Iam using 9.0 PL.08