Need to track Budget at WBS wrt Value & Qty both

Dear All PS Gurus,
We have specific requirement to track Budget in PS ( WBS Level ) thru material qty as well as value.
Are there any work arounds or any other solutions..
Umesh Bagul

Hi,
As rightly mentioned by Gokul, Budgeting on the quantity is not possible in Standard SAP. The only to get through this is to go for a Z development. Create a Z table and plan all the required material & quantity against each project. During the PR/PO or stock issue , validate the quantities with respect to the quantities entered in the Z table.
Warm regards,
Srinivas Potluri

Similar Messages

  • WBS element need not to capture specific condition type value in Po

       Hi Gurus,
    example
    we have 2 PO document types a) consignment PO b) standard PO
    if in Consignment PO condition values are
    Basi Value
    100
    Excise
    10
    E cess
    2
    CVD
    4
    Total
    116
    Total = 116 this value goes to WBS commitment line item
    a) but in consignment PO has to be value 116 , and in WBS commitment line items capture only 112 only CVD value 4 need not be capture in wbs commitment line items
    b) standard PO & wbs commitment line items need to be capture 116 only
    so please can any one give solution

    Hi,
    As I know, there is not any standard functionality for excluding commitments for certain condition type. On the other hand, you can make that line item as free issue if you dunno want to generate commitments.
    Also let other experts comment on this.
    Regards
    Shishir

  • Function Module to obtain Initial Budget and Available Budget of WBS

    Hi,
    I need to calculate the value for Initial and Available budget for WBS which comes in the report S_ALR_87013558 or S_ALR_87013648.
    Is there any FM to calculate for the particular WBS.
    Thanks

    Hi,
    Try using KBPR_READ_DATA function module.
    Regards,
    Eli

  • PR eliminated not return budget for WBS

    Hello Guys.
    PR even with "deleted" status not return budget for WBS.
    In tcode CJ20N the Purchase Requisition has been marked for deletion. The committed amount of the budget not returned to WBS element.
    The personnel has some way to find out where did the budgeted value of this eliminated PR?
    Have performed CJEN and nothing happened.
    Please I need a help in this matter.
    Thank you very much
    Vitti

    Please check the below specified link, which is very much similar to u r requirement
    http://help.sap.com/saphelp_46C/helpdata/EN/fd/45add69d6411d189b60000e829fbbd/frameset.htm
    Regards
    Suresh

  • How do I add a new device to my icloud if it was stolen?  I need to track it

    How do I add a new device to my icloud.  My Ipad was stolen and I need to track it

    If you did not configure it for Find My Phone before it was stolen, then it's too late now.

  • Need to create a report to show values for a particular date range

    I have to create a report, out of which I need two columns : << Customer Value Variance and Churn Score Variance >> to show values only for a custom date range, which will be entered via a dashboard prompt.
    These generic date columns are not present and cannot be added. I have to make use of Pres variables
    What I have currently done is:
    1) Created a prompt with 2 different date columns and passing those values into variables vStartDate and vEndDate. (I don't actually need those 2 column which I have selelcted, but I have taken those so that I can prompt the values in calendar format and pass onto the variables)
    2) Created report with necessary columns, with 2 extra columns (hidden) as vStart Date Column and vEnd Date Column which take the values from the presentation variables defined in the prompt. I have created these columns as then I can reference these in the two required columns if necessary.
    I am already facing error in report after doing this and I am confused how to proceed. Any suggestions?
    Thanks.

    Yes, but it only has one generic Date column, no start date and end date. I can't use that twice in the prompt. Although I can specify it to be 'between', but I'm not sure I can pass values to both variables like that.
    Currently I have used Campaign Start Date and Campaign End Date to enter values in calender format to the variables.

  • Flex pitch (Time) needs midi track import function

    Flex pitch (Time) needs midi track import function

    HI it's me again ( under my studio name).. I don't use Garage Band. I use Logic x. so don't know why you'd suggest doing away with another program when I have no use for Garage Band.
    I think it ended up working only because it was a glitch.... when I exited the program and came back to it, it started working. The only thing that didn't appear was the pitch correction on the left hand side of the sound editor.. the slider button where you can go up to 100%...
    but at least it worked. This Apple operating system always has bugs .. but gllitching on my projects doesn't make me a happy camper.
    They don't even offer support for it. unless you pay through the roof.
    Anyway.. it showed up... not sure how it did, but rebooted my computer and miraculously it was there.

  • WBS Element Value into PR

    Hi All,
    How the WBS Element Value will come automatically to Purchase Requisition  when the PR is generated from PS.
    Regards
    Sangram

    Hi,
    Thanks for your reply.
    Yes i am generating Service PR. But WBS Element value is not reflecting in PR only Network Value is coming. 
    Here my account assignment category is Network.
    Regards
    Sangram

  • Need to track windows processes through java code.

    Need to track windows processes through java code.
    Eg: I want to find out whether an exe file (wrun.exe) is running or stopped.
    Can I do it through java. If so can any one please tell me how to do it. That will be a great help.
    Thanks,
    Ramesh

    There are 2 options for things like this:
    1) Use Runtime.exec() to execute some command or application and parse the input from it.
    2) Write some native code and use JNI to call it.

  • I need to raise LC for import PO . Need to track the LC and its maturity da

    Hello ,
    I have this scenario where I need to raise LC for import PO . Need to track the LC and its maturity date .
    How to do this. Please guide .
    Regards
    subbu

    HI,
    I had raised the same issue few days back i got the same reply.From  SD side it can be mapped not
    from MM side.Raise an OSS note to SAP,get their reply and give it to the client.This is the only way out
    murugan

  • Control the budget by  wbs

    hi.
    When I control the budget by  wbs,it   is different from  the Budget has been allocated (cj31)  and  Actual budget .
    the Budget has been allocated  is greater than   current budget .
    When i check the data, i found  the amount  of Construction-in-progress to fixed assets  has been add to
    the Budget has been allocated  .
    How to  solve this problem,T-code:optk can solve this problem?
    the Budget has been allocated  In  T-code:cj31 from which table?

    hi
    to exempt the cost element for the budget control you have to use this transaction.

  • How to budget the WBS through Investment management

    Hi,
    How to budget the WBS through Investment management. I tried IM52 but its not budgeting. Actually I have assigned the TOP WBS element to Appropriation request and assined the AR to Investment program, in that TOP WBS there are more than 20 low level WBS so I want to budget those WBS element which are under top WBS.
    Regrads,
    Ajay

    Hi AjayKumar,
    Assign IM Program type in your defaulted Budget profile and assign investment profile in project profile. make sure all settings are correct in Investment profile and budget profile. now assign budget to the IM Position ID to which Top level WBSE is assigned through AR. try to allocate budget from IM Position ID to Top Level WBSE. Once allocated check in CJ30 and you can further distribute the allocated budget from top level WBSE to lower level WBS Elements. You have to manually distribut budget from top level WBS Element to lower level wbs elements.
    Hope this clears you !
    Br
    Hari

  • HT4061 I need help tracking my iPad

    Hi, I need help tracking my iPad, unfortunately I left it on the American Airlines plain during my flight yeterday and I do not have serial number handy. Is there a way to retreive that number now?

    If the iPad was running iOS 7, the thief/finder will not ever be able to use it.
    iCloud: Find My iPhone Activation Lock in iOS 7
    http://support.apple.com/kb/HT5818
    Apple (and no one else) can not assist (with serial number or iCloud) in finding a lost or stolen iPad.
    Report to police along with serial number. Change all your passwords.
    These links may be helpful.
    How to Track and Report Stolen iPad
    http://www.ipadastic.com/tutorials/how-to-track-and-report-stolen-ipad
    Reporting a lost or stolen Apple product
    http://support.apple.com/kb/ht2526
    What to do if your iOS device is lost or stolen
    http://support.apple.com/kb/HT5668
    iCloud: Locate your device on a map
    http://support.apple.com/kb/PH2698
    iCloud: Lost Mode - Lock and Trace
    http://support.apple.com/kb/PH2700
    iCloud: Remotely Erase your device
    http://support.apple.com/kb/PH2701
    Report Stolen iPad Tips and iPad Theft Prevention
    http://www.stolen-property.com/report-stolen-ipad.php
    How to recover a lost or stolen iPad
    http://ipadhelp.com/ipad-help/how-to-recover-a-lost-or-stolen-ipad/
    How to Find a Stolen iPad
    http://www.ehow.com/how_7586429_stolen-ipad.html
    What NOT to do if your iPhone or iPad is lost or stolen
    http://www.tomahaiku.com/what-not-to-do-if-your-iphone-or-ipad-lost-or-stolen/
    Apple Product Lost or Stolen
    http://sites.google.com/site/appleclubfhs/support/advice-and-articles/lost-or-st olen
    Oops! iForgot My New iPad On the Plane; Now What?
    http://online.wsj.com/article/SB10001424052702303459004577362194012634000.html
    If you don't know your lost/stolen iPad's serial number, use the instructions below. The S/N is also on the iPad's box.
    How to Find Your iPad Serial Number
    http://www.ipadastic.com/tutorials/how-to-find-your-ipad-serial-number
    iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number
    http://support.apple.com/kb/HT4061
     Cheers, Tom

  • Need mobile tracker for nokia c3-01

    i need mobile tracker for nokia c3-01

    nitingaba2 wrote:
    i need mobile tracker for nokia c3-01
    As this S40 device does not have embedded GPS, positioning based upon cell tower triangulation would not be accurate enough.
    If I've helped in any way, a click upon the white star at bottom right of screen would always be appreciated.
    However if my answer also solves your problem clicking below it will benefit other users!

  • WBS Element report in both currency- Urgent

    hi
    I want to pull WBS elements report in Both USD and CAN $ together but i do not know whr to do it.
    plz tell me whr in Project System i can do this
    plz help it is very urgent
    Thanks
    Manish

    Hi Manish,
    Use transaction code <b>CJI3</b>. When prompted, input controlling area, and on prompt for DB Profile, input <b>000000000001</b>. Input the WBS element in its field and execute. Once the report is displayed, Use the "<b>Change Layout</b>" icon to select the fields "<b>Value COCurr</b>", "<b>Value ObjCurr</b>", "<b>Value TranCurr</b>" etc. pull these across from the right hand side to the left hand side using the directional arrow. Press "Enter". The figures would now show in the report for the various currencies.
    I hope this helps.
    Do not forget to award the points please.
    Regards,
    Jacob

Maybe you are looking for