Anyconnect Profile XML update

Is there a way to force clients that are already installed to download an updated client profile XML file from the ASA. I have tried editing the existing client profile xml file on the ASA, but the already deployed clients do not seem to download the changes.

Have you tried going into the group policy that the clients use, deselect "Inherit" under "Client Profiles to Download" and specifiying your updated policy?
Reference Figure 2-17 here. (Different policy but same concept.)

Similar Messages

AnyConnect Profiles not getting downloaded.

Dear Team Members
I am facing the following issue in AnyConnect VPN deployment.
Requirement - Users should receive ANyConnect Profile, which has SCEP enabled, so that they can request a certificate from the organization Microsoft CA.
i already have a Certificate on ASA from the same CA and i want to use certificate authentication for ANyconnect.
ASA version is 8.4, i defined the flow as
1: Create User > bind it with a group policy > bind group policy with tunnel-group ( Connection profile)
2: Define a profile ( that has SCEp enabled & CA information URL etc..) and bind it with the group policy and also add it under
   webvpn
   AnyConnect Profile ....
when i initiate https://ASA_Ip_Address i authenticate with the username/password created above, Anyconnect is installed and i am connected, but profile is no tis downloaded, because i see no change on my Anyonnect Screen to request for a certificate. it remains the same, as no profile is available.
have followed the standard procedure,..    Plz guide me, what could be going wrong.
Any inputs from your side will be highly appreicated.
Thanks
Ahad

Hello Marvin
Thanks for your efforts for responding
As such i am using ASA 8.4, ASDM 6.47 & Anyconnect Package - Anyconnect-win-2.5.3055-k9.pkg ( i am using ver 2.5, because ver 3.0 does not support I Phones & Windows Mobile Phones).
Client PC - Windows 7 - 32 bit
1: i created Anyconnect profile using ASDM, it has simple settings to publish CA server details for SCEP, so that Anyconnect users can request the certificate through SCEP ( XML file attached)
2: As cheked profile folder is not available in
c:\program files \ cisco \ Cisco Anyconnect VPN Client
that simply means that profiles are not getting downloaded.
3: Configuration is attached & also the profile XML File.
you could try manually copying the xml onto a test client to see if it then behaves in the way you desire. - can u explain a bit more, how this testing can be done.
Plz let me know, what additional config is required.
Thanks in advanced
Ahad

How to restrict a VPN user with a specific anyconnect profile?

I need to assign to anyconnect users different profiles. This is done easily with IPSec, with the group policy configured in the client. With anyconnect I have two options:
- Allow the user to select the connect profile: The problem here is the user can select any profile and connect with the rules and permissions configured in this profile. I do not how to force one specific profile for each user.
- Use the DefaultWebVPNGroup as connection profile for everybody combined with DAP. This what I am doing now. Everybody connect with the default anyconnect profile and I use DAP to assign each user the network ACL's, Bookmarks, etc. The problem here is that I can not use other options that are included in the profiles or in the policies, like split tunneling or user authentication method.
I have seen some answers about this point but none of them is clear enough. I am using ASA 5540 with 8.4(6) and Windows IAS radius.
Thanks.

Thanks Elias. This works. Easy to configure. When I connect using the client it takes de group policy from the radius attribute 25 and apply it.
Just one little problem. This doesn't work with bookmarks when the user connect with WebVPN. In the logs I can see the connection taking the correct group policy but the bookmarks from that policy are not applied. Any idea?

11.2 Grid Infrastructure profile.xml file is out of sync

Currently running 11.2 grid infrastructure in a two node cluster. The profile.xml is out of sync on node 1 the profile.xml has a different clusterguid from node 2. I have opened a SAR and Oracle has confirmed this is a bug and is with development tier 2.
I just wanted to know if anyone else has seen this issue.

Using Linux 32 bit and 11gR2, on VMware.
During grid installation, i executed root.sh from root user and facing below issue:
*Failed to rmtcopy "/u01/app/11.2.0/grid/gpnp/rac1/profiles/peer/profile.xml" to "/u01/app/11.2.0/grid/gpnp/profiles/peer/profile.xml" for nodes {rac1,rac2}, rc=256*
rmtcopy aborted
Failed to promote local gpnp setup to other cluster nodes at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 6803.
any ideas/suggestions, please...

Profile option update at responsibility level from backend

Hi,
I referred few online and oracle support document to update the profile option from backend. I was able to change the profile option at site level, but when I am trying to update the profile at responsibility ( or any level such as user etc), I am unable to do so. Though the script says that profile option has been updated, it doesn't show up when I check on frontend.
EBS 11.5.10.2
DB 11.2.0.1
The script which I use to change profile at site level is this:-
DECLARE
stat boolean;
BEGIN
dbms_output.disable;
dbms_output.enable(100000);
stat := FND_PROFILE.SAVE('SITENAME', 'ABDVLP', 'SITE');
IF stat THEN
dbms_output.put_line( 'Stat = TRUE - profile updated' );
ELSE
dbms_output.put_line( 'Stat = FALSE - profile NOT updated' );
END IF;
commit;
END;
I tweaked the above script to include the responsibility level change, but its not changing. Both the below scripts are not making any changes.
SCRIPT - 1
DECLARE
stat boolean;
BEGIN
dbms_output.disable;
dbms_output.enable(100000);
stat := FND_PROFILE.SAVE('ICX_DISCOVERER_LAUNCHER', 'http://nalinoes01.abd.ad.acco.com:8003/discwb4/html/discolaunch.htm?Connect=[APPS_SECURE]', 'RESP',51889,671);
IF stat THEN
dbms_output.put_line( 'Stat = TRUE - profile updated' );
ELSE
dbms_output.put_line( 'Stat = FALSE - profile NOT updated' );
END IF;
commit;
END;
Note: I found the responsibility id from the below query
SELECT responsibility_id ,application_id
     FROM fnd_responsibility_tl
    WHERE responsibility_name = 'DIRECT CA IBE CUSTOMER';
===============================================================================
SCRIPT-2
DECLARE
   stat           BOOLEAN;
   resp_id        NUMBER;
   appl_id        NUMBER;
   resp_appl_id   NUMBER;
BEGIN
   DBMS_OUTPUT.DISABLE;
   DBMS_OUTPUT.ENABLE (100000);
   -- Set the Profile Option value at responsibility level
   SELECT responsibility_id, application_id
     INTO resp_id, resp_appl_id
     FROM fnd_responsibility_tl
    WHERE responsibility_name = 'DIRECT CA IBE CUSTOMER';
   stat :=
      fnd_profile.SAVE
         (x_name                        => 'ICX_DISCOVERER_LAUNCHER',   -- Profile name you are setting
          x_value                       => 'http://nalinoes01.abd.ad.acco.com:8003/discwb4/html/discolaunch.htm?Connect=[APPS_SECURE]',   -- Profile value you are setting
          x_level_name                  => 'RESP',   -- Level that you're setting at: 'SITE','APPL','RESP','USER', etc.
          x_level_value                 => resp_id,   -- Default NULL Level value that you are setting at, e.g. user id for 'USER' level. X_LEVEL_VALUE is not used at site level.
          x_level_value_app_id          => resp_appl_id,   -- Default NULL. Used for 'RESP' and 'SERVRESP' level; Resp Application_Id.
          x_level_value2                => NULL   -- 2nd Level value that you are setting at. This is for the 'SERVRESP' hierarchy.
   IF stat
   THEN
      DBMS_OUTPUT.put_line ('Stat = TRUE - profile updated');
   ELSE
      DBMS_OUTPUT.put_line ('Stat = FALSE - profile NOT updated');
   END IF;
   COMMIT;
END;

I tried to change at SERV level and still the profile never gets updated. Kindly help.

Profile.xml: how to select a video input (from number not name)

Hello,
I'm using FMEcmd in command-line mode with a custom
profile.xml
If I look at the profile.xml it looks like the selection of
the inputs (video and audio) is only possible by giving the full
name of the input (not just the input number like for Real Producer
or Windows Media Encoder).
The app. I'm developing will be used with a webcam and I dont
have the information about the model someone will be using (and the
user won't open the FME GUI to generate a profile).
Is it really not possible to select an input from its number
(as seen by windows)?
If not do you have any suggestion to overcome this
limitation?
Also I've played with <crossbar_input> but I'm not sure
what it means.
Thanks
<video>
<device> ToUcam Pro Camera; Video</device>
<crossbar_input>0</crossbar_input>
<frame_rate>15.00</frame_rate>
<size>
<width>320</width>
<height>240</height>
</size>
</video>
<audio>
<device>Appareil photo Philips ToUcam F</device>
<crossbar_input>0</crossbar_input>
<sample_rate>22050</sample_rate>
<channels>1</channels>
<input_volume>75</input_volume>
</audio>

Now that FME 2.5 is out I tried again. I still can't find the
possibility to select the source from number (like Windows Media
Encoder or Real Producer can).
Can someone confirm that this possibility is not present in
2.5?
Is there any slight chance it will be implemented in the next
version?
What work around do you advise?
Thanks for any answers.

Re:XML update

Hello Gurus ,
i want to write a procedure for xml update ,
consider,
a table department consisting depart_no,depart_name,emp_Personal_info here emp_personal_info is a column of xmltype
having data like (for a single department)(FOR DEPTNO 5801)
<EMP>
<EMPPERSONALINFO>
    <id>1</id>
    <name>x1</name>
    <join_date>12/2/2013</join_date>
    <work_station_no>LYH043897</work_station_no>
    <date_of_birth>2/2/1982</date_of_birth>
</EMPPERSONALINFO>
<EMPPERSONALINFO>
    <id>2</id>
    <name>x2</name>
    <join_date>2/5/2013</join_date>
    <work_station_no>LYH043898</work_station_no>
    <date_of_birth>30/5/1982</date_of_birth>
</EMPPERSONALINFO>
</EMP>a each department is holding information of over 100 employees(up to <id>100</id>)
now i want to update emppersonal info with a new attribute <mainbranch>with a default data based on department number
required output:
<EMP>
<EMPPERSONALINFO>
    <id>1</id>
    <name>x1</name>
    <join_date>12/2/2013</join_date>
    <work_station_no>LYH043897</work_station_no>
    <date_of_birth>2/2/1982'</date_of_birth>
    <mainbranch>CZDS</MAINBRANCH>
</EMPPERSONALINFO>
<EMPPERSONALINFO>
    <id>2</id>
    <name>x2</name>
    <join_date>2/5/2013</join_date>
    <work_station_no>LYH043898</work_station_no>
    <date_of_birth>30/5/1982</date_of_birth>
<mainbranch>CZDS</MAINBRANCH>
</EMPPERSONALINFO>
</EMP>kindly guide me,
regards,
friend

Hi,
What's the database version?
You've posted enough here to know how to properly ask a question.
now i want to update emppersonal info with a new attribute <mainbranch>with a default data based on department numberYou wouldn't have such issue if the data model was correctly designed in the first place, using 3rd NF, i.e. with a separate child table to hold employee information.
You can use insertchildXML or appendChildXML functions :
SQL> update department t
2 set t.emp_personal_info =
3      insertchildxml(
4        t.emp_personal_info
5      , '/EMP/EMPPERSONALINFO'
6      , 'mainbranch'
7      , xmlelement("mainbranch", 'D' || t.dept_no)
8      )
9 where t.dept_no = 5801 ;
1 row updated
SQL> set long 5000
SQL> select xmlserialize(document emp_personal_info indent) from department;
XMLSERIALIZE(DOCUMENTEMP_PERSO
<EMP>
<EMPPERSONALINFO>
    <id>1</id>
    <name>x1</name>
    <join_date>12/2/2013</join_date>
    <work_station_no>LYH043897</work_station_no>
    <date_of_birth>2/2/1982</date_of_birth>
    <mainbranch>D5801</mainbranch>
</EMPPERSONALINFO>
<EMPPERSONALINFO>
    <id>2</id>
    <name>x2</name>
    <join_date>2/5/2013</join_date>
    <work_station_no>LYH043898</work_station_no>
    <date_of_birth>30/5/1982</date_of_birth>
    <mainbranch>D5801</mainbranch>
</EMPPERSONALINFO>
</EMP>
These XML DML functions are deprecated as of 11.2.0.3 in favor of XQuery Update.

Cisco ISE Anyconnect Profile editor

I want to wired user's authenticate from ISE device and to use authentication protocol EAP_FAST. In PC need to install Cisco Anyconnect Profile Editor.
where and how i get anyconnect profile editor.
Thanks.

It's one of the packages listed in the AnyConnect download location.
Go here and click on Download Software.

IBE: Attachment Document Category -- Profile Option -- Update ???

We are doing a Proof of Concept for iStore Attachments and I need to update the "IBE: Attachment Document Category". The field is protected against update when attempting from System Administrator responsibility. Is there a certain responsibility/account required when modifying this profile option ??
Thanks in Advance

hsawwan wrote:
Hi,
Mark the Visible column at the Site level, and you should be able to mark the Updatable column then (at the same level). If you want to have this profile option updatable at the <A class=bodylinkwhite href="http://www.software-to-convert.com/avchd-conversion-software/avchd-to-iphone-software.html"><FONT face=tahoma,verdana,sans-serif color=#000 size=1>Application</FONT></A> level, just tick the box.
Regards,
HusseinCould you explain it more clearly? I'm a beginner.

"Every time when I edit my profile or update my profile, I had charged from Apple ITune 1 USD. Why not!!!!!!"

"Every time when I edit my profile or update my profile, I had charged from Apple ITune 1 USD. Why not!!!!!!"
"Every time when I edit my profile or update my profile, I had charged from Apple ITune 1 USD. Why not!!!!!!"
"Every time when I edit my profile or update my profile, I had charged from Apple ITune 1 USD. Why not!!!!!!"

Hello TOP SupaviT,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
iTunes Store & Mac App Store: About payment card authorization holds
http://support.apple.com/kb/ht3702
If you update your billing information, the iTunes Store or Mac App Store will place an authorization hold on your payment card account, usually in the amount of 1 USD or the local currency equivalent, to verify your account information.
Best of luck,
Mario

ITunes tantrum - xml update, lost songs, data1.cab errors

Hi All,
In the last couple of days my iTunes has thrown a real tantrum.
When I switched on iTunes on the PC two days ago, it didn't come up straight away, instead it said it was updating the XML. This went on for ages, so thinking it was just one of those wonky start-ups, I hit cancel and loaded it again - the result half my songs were missing - about 3500 gone.
I had a back-up of the xml & library so I brought those in and ran iTunes again - this time when it did its xml update I let it finish.
The result was that all the songs added in the last month were gone - so I re-added them.
The next day I opened it up and the new songs were gone. (It's a 40gb iPod photo, with about 30gb used).
I decided to update iTunes from v6 to v7 to see if that helped.
The upload kept failing (sulking about the iTunes & Quicktime .cab files), but after repeated tries it eventually went through.
I was able to use it that night and re-loaded most of the songs.
I tried to open iTunes this morning and it tells me that I haven't got Quicktime v7.1.3 installed only v7.1 - however I have checked and I do have v7.1.3 installed.
I've tried to re-download the 34mb iTunes 7 setup exe from the Apple site and all it sends is an uncertified file of varying size between 70 & 700mb, which can't run anyway.
I tried loading the original iTunes software from the disk, but it's kicked out straight away due to a later version being in place.
Please help, I've tried all the options my tiny brain can offer.
Thanks,
Paul

Paul,
Whilst it's possible you may get help in this Forum, you have a much better chance if you re post in the iTunes/Windows forum which is here.
http://discussions.apple.com/forum.jspa?forumID=792
There are experts there who rarely visit the iPod forums.

Add mobile broadband profile using netsh gives "Invalid Profile XML" error

We're trying to create an automated installation to upgrade to 8.1 Pro soon and since we have our own APN at our provider, we'd like to add this using a script. However when I try to add my XML profile using
netsh mbn add profile interface="Mobile broadband" name="profile.xml"
I receive the following error: Add Profile Failure: Invalid Profile XML.
I've found some Windows 7 topics regarding this issue, pointing at the encoded Subscriber and ICC id's in these XML files. I have already found the unencoded values with
netsh mbn show ready * and added them to the XML file, but still no dice :-(
This is my XML file:
<?xml version="1.0"?><MBNProfile xmlns="http://www.microsoft.com/networking/WWAN/profile/v1">
<Name>My Company Name</Name>
<IsDefault>true</IsDefault>
<ProfileCreationType>UserProvisioned</ProfileCreationType>
<SubscriberID>123451234512345</SubscriberID>
<SimIccID>1234123412341234567</SimIccID>
<HomeProviderName>vodafone NL</HomeProviderName>
<ConnectionMode>auto-home</ConnectionMode>
<Context>
<AccessString>custom.provider.nl</AccessString>
<UserLogonCred>
<UserName>username</UserName>
<Password>p4ssw0rd</Password>
</UserLogonCred>
<Compression>DISABLE</Compression>
<AuthProtocol>NONE</AuthProtocol>
</Context>
<DisplayProviderName xmlns="http://www.microsoft.com/networking/WWAN/profile/v2">My Company Name</DisplayProviderName>
</MBNProfile>
I've removed all existing mobile broadband profiles from the system, netsh mbn show profiles
shows an empty list so it's not a naming issue. I tried removing the XML version header from the file (a lot of examples of these XML files don't have it), leaving the Subscriber and/or ICC ID empty, removed them from the XML file but nothing seems to
work.
Does anyone have some other suggestions?

Hi,
I'm sorry for have no idea with your problem. Since those methods you tried but failed, in my opinion, it would be better to use Process Monitor to capture the trace of excuting this XML file.
Start Process Monitor, close as much unrelated process as possible, then run command to enable this XML file.
After error occures, stop capture.
Process Monitor:http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
Roger Lu
TechNet Community Support

Receive: "Add Profile Failure: Invalid Profile XML" error when adding WWAN profile - Windows 7

I'm trying to import below XML profile to Windows 7 machine and no matter what profile i use (even the one it was on that computer originally it gives me an error.
Command:
netsh mbn add profile interface="Mobile Broadband Connection" name="test.xml"
test.xml is in c:\temp folder.
<MBNProfile xmlns="http://www.microsoft.com/networking/WWAN/profile/v1">
<Name>TestProfile</Name>
<IsDefault>true</IsDefault>
<ProfileCreationType>UserProvisioned</ProfileCreationType>
<SubscriberID>01.........................00000</SubscriberID>
<SimIccID>89480............9713302</SimIccID>
<HomeProviderName>02</HomeProviderName>
<AutoConnectOnInternet>true</AutoConnectOnInternet>
<ConnectionMode>manual</ConnectionMode>
<Context>
<AccessString>Internet</AccessString>
<Compression>DISABLE</Compression>
<AuthProtocol>NONE</AuthProtocol>
</Context>
</MBNProfile>
Tried these steps:
- configured the setting using UI and test connection - it worked.
- copied that profile from path: C:\ProgramData\Microsoft\WwanSvc\Profiles to
c:\temp and renamed it to test.xml
- closed the connection and run command: netsh mbn delete profile interface="Mobile Broadband Connection" name=TestProfile
- and then tried to add the profile under changed name (no profile changes made): netsh mbn add profile interface="Mobile Broadband Connection" name="test.xml"
- received very nice message: Add Profile Failure: Invalid Profile XML
I'm stuck, help?

Hey,
Got an answer. It required some debugging, but I end up finding it.
When you add that profile, system executes a function which compares Subscription ID tag with the one it has in system already. If one is already there then overwrites the profile, if NULL adds the profile. Problem is, as soon as any of
the profiles are configured manually to redistribute later, the Subscription ID tag is encoded. And window doesn't know how to decode it, so it fires an error.
The Subscription tag is an IMSI number, when you right click it on your connection and go to properties, you will see it there, 15 digits. Copy it and paste it to the XML file replacing encoded number.
It works as a charm.
I leave deployment methods to you... :)
Not so happy to answer my own question, but what a heck... glad to help even one person :)

ITunes tantrum - xml update, lost songs, not recognising new Quicktime

Hi All,
In the last couple of days my iTunes has thrown a real tantrum.
When I switched on iTunes on the PC two days ago, it didn't come up straight away, instead it said it was updating the XML. This went on for ages, so thinking it was just one of those wonky start-ups, I hit cancel and loaded it again - the result half my songs were missing - about 3500 gone.
I had a back-up of the xml & library so I brought those in and ran iTunes again - this time when it did its xml update I let it finish.
The result was that all the songs added in the last month were gone - so I re-added them.
The next day I opened it up and the new songs were gone. (It's a 40gb iPod photo, with about 30gb used).
I decided to update iTunes from v6 to v7 to see if that helped.
The upload kept failing (sulking about the iTunes & Quicktime .cab files), but after repeated tries it eventually went through.
I was able to use it that night and re-loaded most of the songs.
I tried to open iTunes this morning and it tells me that I haven't got Quicktime v7.1.3 installed only v7.1 - however I have checked and I do have v7.1.3 installed.
I've tried to re-download the 34mb iTunes 7 setup exe from the Apple site and all it sends is an uncertified file of varying size between 70 & 700mb, which can't run anyway.
I tried loading the original iTunes software from the disk, but it's kicked out straight away due to a later version being in place.
Please help, I've tried all the options my tiny brain can offer.
Thanks,
Paul

Paul,
Whilst it's possible you may get help in this Forum, you have a much better chance if you re post in the iTunes/Windows forum which is here.
http://discussions.apple.com/forum.jspa?forumID=792
There are experts there who rarely visit the iPod forums.

Desktop Display Profile XML

If you perform a fresh install of Portal Server 6.0 and create a new organization... is there supposed to be some existing information in Desktop -> Display Profile: Edit XML ?
In the admin guide at docs.sun.com the directions for creating a new organization say to download and upload the Display Profile XML. There isn't anything there.
Is there a document that clearly explains what they're talking about.
In a previous thread on creating new organizations, the user says to copy the XML from an existing organization and paste it into the new org. Unfortunately, after a new install, there is no existing organization to copy from.
And finally... is this portal server software something that requires the admin to take the Sun classes? It seems to me there is a lot of information lacking in the documentation. I don't see how anybody can get this thing up and running on the documentation alone.

Adding to the same question, how do we restrict a user from editing a display profile,
If a user is making modification to the desktop and logs off, when he logs back i dont want his old state, but i want the state which he could for the first time when he logged.
please provide pointers for doing the same

Anyconnect Profile XML update

Similar Messages

Maybe you are looking for