Anyone can help with the issue of Bootcamp on a Macmini with dual drives?
After installation of Windows 7 premium 64 bit, my MacMini wont boot from the Windows partition as it should.
Any idea why and how to fix this? Apple care refers me to Microsoft support for their help.
You could use Bootcamp to remove the current Windows partition. Then, run Bootcamp again to redo the partitioning and Windows 7 installation process. That's infinitely better than trapped between two support organizations.
Similar Messages
-
My father's MAc is still on Snow Lepoard. Ovewr the weekend his Mail sent out over 400 emails to contacts. We were unable to delete the messages. 1. Does anyone know what the problem is 2. If so how can we fix it.
PBThanks. Will di immediately. Do you think I need to change the address as well or should just the password be sufficient.
PB -
Need help with dual drives on Mini
I just replaced my main drive with a 750GB drive and installed a second drive a 64GB SSD on my 2011 Mac Mini. So when I booted it I installed Lion OS on the SSD and cloned my old 500GB to my new 750GB drive. I only want to have the OS, Lightroom and Photoshop installed on the SSD.
So here are some questions.
1. Can I just drag and drop LR and PS to the SSD and they will work?
2. How can I make everything I download or install go to the 750GB drive automaticly?
3. How do I get all my apps to show up in the App file on the SSD drive but still keep them installed on the 750GB drive?
4. How do I remove the OS off of my 750GB drive to free up space?
I want to try to get most of these questions resolved before I install Mountain Lion.1. Likely, but they'll still be looking for & using the Drive they were installed on for other components & settings.
2. You can set the Download folder in Safari>Preferences General, on Installs you'll have to choose the Install Disk.
3. Find the Applications folder on the 750, drag it to the Right Side of the Dock.
4. Not easy without erasing.
Are you sure you want/need iOS8? -
Anyone can help me to make small modification to swf file ?
Hello,
Anyone can help with this 2 issues please,
I have this swf file to which I need to move the volume button to another place because my flash will be smaller and the button its not visible there. I have a picture attached with correct position. Actually I haver managed to move it myself using Adobe Flash Pro, but as I export the fla file to swf it results a mess.
2. I need the main pictures to have direct links to my prefferance i.e. www.mysite.com/forum. I don’t know where to enter it. I try it in a few places but didnt work.
I attached the 1Mb rar file with swf , xml and correct position. http://www.fileswap.com/dl/hihoGYdQZx/
Thank youOriginally it was swf file. I attached original files, unmodified.
http://www.fileswap.com/dl/V9TKw1ai1M/
I need to change text and logo after. -
I am using iPad 3 and I try to use 30-pin Digital AV adaptor for mirroring on my Samsung HD TV. Unfortunately it is not a full screen projection. Anyone can help?
The iPad Screen is almost square, HD TVs are rectangular so will never be full screen. When watching movies, the movies native aspect ratio will be used rather than the iPads screen aspect ratio so will look full screen if the movie is full screen, but most likely will be seen in wide screen letter box format. with black bars across the top and bottom as that what most movies from iTunes are in, format wise
-
Does anyone can help me with Typical issues to deal with when rolling out ERP in Japan?
Does anyone can help me with Typical issues to deal with when rolling out ERP in Japan?
If it were me I would schedule an appointment at the store where you bought it and meet with the Manager of the store in person. Print this post and bring it with you along with your iMac.
And change the password on your Apple ID and then see if there are in purchases in your account that you did not make. If there are then someone did get your ID and password. If not someone got your Credit Card information from somewhere and used it. -
I use "hdmi to component converter" to connect apple tv with my old plasma tv by component cable. Sound is ok but the picture split 2screens left and right. Still can't fix it. Anyone can help or has any idea? should I try convert to av?
Your TV hasn't entered some odd picture in picture mode has it with two 'inputs' side by side?
AC -
hi everyone, i have a problem about my iphone 4S, doesn't work with wifi connection and bluetooth since upgrade to the IOS 7.0.3. Can anyone can help me tosolve this problem?????Thank's regards paulus
Try the suggestions here to see if they resolve your problem:
http://support.apple.com/kb/ts1559
If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support. -
Not sure if anyone can help but I have a copy of Photoshop CS5.1. Ever since it was installed, every now and again when I try do something simple like save a file or scale something using the Transform tool, in fact anything at all it comes up with "Could not complete your request because of a program error". Have thought about re-installing it but I have lost my serial number. I'm living in Ireland and trying to get to talk to someone in tech support is a complete joke. Any ideas what to do ? Thanks
Ianp69549740 have you tried reinstalling Photoshop CS5.1? If so do you receive any specific errors? What operating system are you using?
-
i just buy a imac 27inch when after intalling everthing for windows 7 and all the drivers i need and goes to the restard part my imac just goes to a black screen with a blinking cursel and it just wont proceed anyone can help me with this?
Support articles for things like this would be here:
http://www.apple.com/support/bootcamp -
hello, I can not reset Iphone 3gs, I tried few times, but I only get a cable on the screen with Itunes icon. and Itunes does not see it. anyone can help me?
You may need to put the iPad in recovery mode to restore it.
http://support.apple.com/kb/HT1808 -
Hi. Since I installed the Maverick I can't open anymore the Calendar App as also the App Store. Anyone can help me with that?
Thank you in advanceI have this same problem on my iMac since installing Mavericks. The emails download, I can see who they are from and when they came, but nothing shows up in the message pane. I can see emails I got before I installed Mavericks, although about half of them did disappear. Sure would like to find a fix--perhaps the 10.9.1 update will do it?
-
I have trouble to log in facetime with my Mac air. Is anyone can help?
I have trouble to log in face time with my Macbook Air. Is anyone can help?
Hi kho99,
Can you elaborate on the issue a bit? What error message(s) are you receiving? Does the application start up properly? Is it accepting your credentials? Is there any issue initializing the camera, video stream or audio?
More information and specifics but be very helpful in provide next steps. -
after i use 4.3.3 for iphone 4. the notification for facebook and yahoo do not work. what is wrong? anyone can help?
I am also on my forth hard drive on the same model.
When I unpacked the computer, the hard drive did not include OS X either. Actually, it was completely blank. Did not even have a partition table! I have also had random problems with the machine not charging.
I have replaced the drive myself with an SSD after figuring the Apple Certified technicians were incompetent. Now even the SSD is starting to fail
I have bought an HP laptop and setup Ubuntu on it. Hope it turns out better than my previous four various Mac models. All have had various repeating hardware issues that Apple Certified technicians have been unable or unwilling to correct. -
I am not able to scroll my contacts. If i add or mahe any change in existing contacts, it appaers at the top of the contacts and freezes rest above the first letter of newly added or changed one. Anyone can help?
Hi,
>>1. how can i align Title(DCS Clinical Report-Technician wise) center of pdf report with image named:logo5.png immediately coming to it's right?.
2. how do i add the given below row and it's data to my top my table in pdf report from c# windows forms using itextsharp?
3.how to make my column headers in bold?<<
I’m sorry for the issue that you are hitting now.
This itextsharp is third party control, for this issue, I recommended to consult the control provider directly, I think they can give more precise troubleshooting.
http://sourceforge.net/projects/itextsharp/
Thanks for your understanding.
Regards,
Marvin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.
Maybe you are looking for
-
There is only one question I want to ask that is how do i back up my ipad to a computer
I have tried to back up my ipad mini to my Toshiba laptop windows 8. And I cant seem to back it up. Also , if you want to back up an apple device do you have to back it up on icloud and a computer or just on icloud?
-
How Can I Get Group By Select Statement To WorK?
How can I get Code2 to work correctly? Code1 works fine. A user enters the customer and a date range on a form and submits request. I get error message in Dreamweaver. You tried to execute a query where the specified expression field3 is not part of
-
Why is the scanner on my HP1CD560 HP Photosmart Prem C310 Series not being recognized?
Why is the scanner on my HP1CD560 HP Photosmart Prem C310 Series not being recognized in my computer ? I have the same printer/scanner/fax at work and I couldn't get it to scan either. They just keep saying No scanners were detected. And it tells
-
Value converting to upper case
Hi, There is a table control, but when i am taking a value from the table in PAI of my screen, the value gets converted to upper case, can any one suggest me what would be happening. Is there any way to control this? Thanks in Advance, kushagra sharm
-
Work item 000000400082: Object FLOWITEM method EXECUTE cannot be executed?
Hello, I am getting the above mentioned error during the start of the custom built workflow. The process to re-produce the error is as follows; 1. The employee raises a travel request which goes to his reporting officer for the approval process. 2. T