Anyone have any luck installing the PCI-8212 in a Dell PC w/ NT 4.0 and the new PCI 66MHz/64 bit bus?

NI-488.2 ver 1.7 won't reconginize the card. I got the card to work in an older PC with the original PCI bus. NI's answer was to use a different OS like Win 98. The application I'm using requires NT 4.0. Any suggestions? I followed the installation procedures exactly on a fresh install of NT brought up to SP6 and IE5.5.

Matt,
Do you have another computer that you can try the PCI-8212 in? That
should tell you whether or not is is a problem with the card.
Matt Klabnik wrote:
>
> Ethernet worked fine.
>
> No error message. When I went to activate it in the GPIB control panel
> the serial number field remained grayed out.
>
> I gave up and bought Win2K. I'm not sure my application supports Win2K
> yet, so I may still need to fall back to NT 4.0.
>
> BTW, the machine is a Dell PowerEdge 1550 1U Server. PIII 866, 512MB
> RAM, 3 x 18GB configured as RAID 5.

Similar Messages

Has anyone had any luck returning there iMac w/ Lion? I couldn't even reconnect back to the iternet tonight w/o restarting my new iMac.... Looks like folks have been having this problem for months

Has anyone had any luck returning their iMac w/ Lion? I couldn't even reconnect back to the iternet tonight w/o restarting my new iMac.... Looks like folks have been having this problem for months & months .. The Apple tech told me that all I could do is wait for Apple to come up with a fix... Got a new router this week so that isnt' it. Would I be better off w/o this until Apple gets their act together? I downloaded the combo update 10.7.3 & it helped for about a day... yesterday I still had to manually reset the connection but now it's resorting back to disconnectiong w/o fully going into sleep mode first. Sorry to say this is a major lemon. Help!

Seems unfair... I thought I was probalby having a router problem... got a new router this week. Thst's when we realized we have a computer problem. My next door nieghbor got zero sleep staying up all night while trying to help us figure out what the problem could be. He said if it were him he would have returned the iMac / Lion. Got the new iMac w/ Lion for Christmas but didn't realize until this week that Apple is the problem.... Hard to believe that Apple just has kept on selling this like ... oh No problem! Can't stay on the internet... but will sell you another one today! I'm getting mad... It's not every day we spend that kind of money on a computer . & ALL they can give us is that LOUSY Lion combo update. I can't even stay connected long enough to make a vitamin order with Puritan's Pride... & then the disconnection wipes out my cart... so I have to start over. When are they going to fix this! 'Not feeling very positive'. I feel like Apple KNOWINGLY sold my husband a defective... system. 14 days... oh please...

Anyone have any luck with steam and wine

im trying to get any steam to work with wine and so far i've had no luck.
i have a 512 ATI RADEON X1600 graphics card and im using the open source ati driver.
have had some success with counterstrike 1.6. I start a game (local) but it is extremely choppy/laggy.
does anyone have any pointers on how to get it to run more smoothly?

I don't know how well the open source drivers are going to handle games, catalyst may work better but you will have to use the legacy driver (here) for an X1600, and it doesn't work with the most recent kernel.

Anyone have any luck Imaging a Lenovo T420 with ZEN 10?

I have a ZEN 10 server setup and got the latest (March 2011) BootCD.iso, but still am unable to image one of the New Lenovo T420 Laptops. Has anyone had any luck, or have a bootcd.iso that will work with them?
Thanks
Bill

Originally Posted by schoenb
I have a ZEN 10 server setup and got the latest (March 2011) BootCD.iso, but still am unable to image one of the New Lenovo T420 Laptops. Has anyone had any luck, or have a bootcd.iso that will work with them?
Thanks
Bill
Try this one: NOVELL: Downloads - ftf_zcm11_e1000e_1.3.10a.zip
Thomas

TS1363 I'vw tried everything here multiple times, anyone have any luck with another non-apple generated solution?

Any time I try to connect to itunes, windows recognizes the ipod, but it never comes up in itunes. When the bubble for "trust" or "dont trust" comes up, I tap trust. Then I hear the window sound for disconnecting something from a usb port. I tried all the apple solutions, nothing helped at all. Anyone have any ideas? I tried full restoring the ipod too, and now I've got an empty ipod that I cant connect to itunes....fantastic...

After having communicated with Bose extensively over the last two months I'm pretty sure there is no solution to this. Bose are not the only phones that exhibit this, but there are only a handful that do and they all support multi-link technology in BT 4.0. One theory is that in searching for other devices to link is what causes the skipping, but in none of these is there an option to turn off multi-link (which might be the solution).
The good news is that CES has introduced a TON of new BT headphones, and we'll see these come to market this spring. One or more of them may well work for folks (for audiophiles the best looking one so far is Sennhesier's Momentum series, already a respected model among wired sets, the BT version is getting excellent early reviews. But pricey). Unless you need something immediately my advice would be to wait a few months and see what comes out.
You are correct that Powerbeats have sync issues -- sync issues are common with bluetooth but some makers do better than others. My portable BT receivers, for example, have excellent sync across all apps. But as I noted above, this isn't a good solution for those on the go (pairing a portable BT receiver with otherwise wired phones -- although if folks are interested my new favorite is the Fidelio X2/27 model with these. Truly audiophile level sound, at a reasonable price. But not something I'd take out of the house :>).

Anyone have any luck with the tascam 144?

i am buying a tascam 144 usb interface in about a week cus someone told me it worked well with garage band but now i am having second thoughts cus i have read that a lot of people have trouble getting garage band to recognize it. anyone got any advice?
also how do you turn the volume of a track up during the mastering process, without clipping, so that your song is as loud as a commercial cd?
thanks

don1212 wrote:
i am still a bit confused though
can someone explain how compression or limiting raises the volume cus a i am stil new : )
Compression is confusing, and people are often confused by what it does and how it works, so you’re not alone! It’s also used in a number of ways for different purposes, many of them “so that’s how they do that!” familiar, and others not so obvious. It’s been an essential part of the recording process throughout the history of recording, and great compressors, like great guitar amps, are sought-after pieces of gear.
To understand conceptually how compressors work to make things louder (which isn’t their only use, but is the topic of the thread), you need to understand the difference between peak and average levels. Average volume levels are what give you a sense of how loud the music is, peak levels are the occasional spike. A peak level may be so short, you barely perceive it.
When you raise the volume level on the whole track to the point just underneath clipping, it’s going to look to the peaks, and bring them up to the top of the volume scale. Everything else (and average levels) are going to be below that. If you tried to raise the volume any higher to get average levels higher – so it sounds louder – you would be lifting your peak levels into the clipping range. And clipping is bad.
So, the trick is to lower the volume on just the peaks so you can raise the volume on the entire track and make the average levels louder. Compression does that by kicking in above a threshold that you set (or is set in the preset), and lowering levels above that threshold by a certain ratio. If the settings are gentle, you may not notice it. If the settings are aggressive, you may not only notice it, but it can create ugly artifacts. In any case, above a certain threshold, it restrains the volume, taming the peaks.
After it tames the peaks (which may incidentally, be only a few imperceptible spikes) the audio flows into a “makeup gain” stage that’s essentially a volume knob. When first compressed, with reduced peaks, the track is no louder than it was before – and with lower peaks may even be softer. However, with the lowered peaks, the makeup gain stage is able to raise the overall volume higher than before, since (if you can picture it) there’s less distance between the new shorter peaks, and where most of the song volume lives below them. So first the compressor squashes the peaks, then the makeup gain can bring everything up... even higher.
Turning off normalize is kind of a “cheat” because it works by allowing you to bring the peaks into clipping (and therefore raise the overall level). In other words, rather than tame the peaks, you let them clip. Because some songs (and people) will tolerate some clipping, it’s a fast and easy way to raise the volume. Artful use of compression and limiting (which is extreme compression above a certain threshold) can get you to the same place without clipping.
Compressors are also often used on voice and instruments to “fatten them up” where the goal isn’t necessarily to make things louder, but to make things sound fuller by lifting up the low-level stuff that might be otherwise inaudible.
Compressors are not without their price. If you overuse a compressor, the dynamic range can be squashed into lifelessness. Also (and particularly with bad compressors), you can sometimes hear the action of the compressor when it kicks in above a certain threshold, and when it releases below it, what's called "pumping."
You might want to check out some other sites on the net to really understand the concept because once you understand it, you can use it to shape the sound of your tracks in powerful ways, and avoid pitfalls.
But I wouldn’t worry about it too much! Understand it as much as you can, but if you just dive in and do it, and use your ears to determine what sounds good or bad to you, you can learn by doing pretty quick.

Anyone have any luck getting a photo editing program for 10.9.1 ? (other than iPHOTO / Aperature)

I was using Elements 11 with Mountain Lion and that was OK but the reviews for Elements 12 compatability with 10.9 are all pretty bad. The folks at Adobe claim that Elements 12 "can be installed" on 10.9.1 but they dont actually state that it "works". I'm just trying to avoid spending the big bucks for the full Photoshop program and Im not even sure that would work either. I have this great new iMAC and cant play around with it yet. Suggestions ?

I have used all of the following on Maversicks, with no issues at all:
iPhoto
Aperture
Acorn
Graphic Converter
Intensify Pro
Snapheal
I've not seen any reports indicating any issues with other apps either. I would strongly echo Larry's comments about App Store reviews, and reviews on download sites and forums up and down the internet. The great thing about the internet is that everyone has an opinion, that might also be the worst thing.
The problems with these comments are manifold: for a start, happy people are less likely to review, unhappy happy are much more inclined to. That's why we don't have thousands and thousands of posts on this forum from all the people who have no problems saying "look I have no problems". Unhappy people get cross and are more likely to express that anger in negative reviews.
Then what about the reviewer? What is his or her knowledge, experience and skill level? No doubt they are having problems, and real ones, but how do you know if their issues are problems with the app, their own inexperience, third party conflicts and so on. I've seen people on here claim the fact that iPhoto won't edit video is a bug. I've seen hundreds and hundreds of posts from folks on here who are certain they've found a bug, only for their glitch to be resolved. No review is worth anything unless you know something of the reviewer, his or her knowledge and experience.
So frankly, I never bother with those reviews on any such stores, not just iPhoto on the Mac App Store.

Anyone have any luck on sequencing Itunes 12?

Hey everyone, I was wondering if anyone has had any success on sequencing itunes 12. I followed the instructions for iTunes 11 here:
http://stealthpuppy.com/sequencing-apple-itunes-11-with-app-v-5/
but, it didn't work properly.
One of the issues I have is that when you launch iTunes, you get the following message:
Thinking it was because the ipod server was not started, I went back and re-sequenced it from manual to automatic, still did not work.
Also, This is going to be used in a lab environment, so it needs to be FULLY setup, the webpage said not to run it, but, I did it anyway-didn't keep my settings.
any ideas?

Have you installed Apple Application Support and Apple Mobile Device Support on sequencer before sequencing and on the client PC before running the iTunes package?
Please remember to click "Mark as Answer" or "Vote as Helpful" on the post that answers your question (or click "Unmark as Answer" if a marked post does not actually
answer your question). This can be beneficial to other community members reading the thread.
This forum post is my own opinion and does not necessarily reflect the opinion or view of my employer, Microsoft, its employees, or other MVPs.
Twitter:
@stealthpuppy | Blog:
stealthpuppy.com |
The Definitive Guide to Delivering Microsoft Office with App-V

Anyone have any luck with merging libraries?

i'm merging two itunes libraries.
trying not to create duplicates, but i think this is impossible.
so i am going to use the view duplicates option and then click date added.
i'll let you know how it works, but if anyone can help with anything faster, please let me know.

I'm having some problems migrating from JRE1.3.1 based JavaBean-ActiveX control. There were non-trivial changes required for EventDescriptor for the events thrown by the bean. However after successfully creating 1.4.2 based ActiveX control, I'm getting following exception:
java.lang.IllegalArgumentException: java.lang.ClassFormatError: $Proxy1 (Repetitive
interface name)
     at java.lang.reflect.Proxy.getProxyClass(Unknown Source)
     at java.lang.reflect.Proxy.newProxyInstance(Unknown Source)
     at sun.plugin.com.event.ListenerProxy.register(Unknown Source)
     at sun.plugin.viewer.AxBridgeObject.statusChanged(Unknown Source)
     at sun.plugin.AppletViewer.showAppletStatus(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Any thoughts about what might be causing this sort of exception.
Thanks.

Anyone have any luck importing native from Canon XF305 camcorder?

I am running Lion and FCP X 10.0.5........Wonder if anyone has a recommendation for cleanest situation other
than native if they have been using it with X allready
Many thanks

I'm importing from XF cameras as we speak.
Here's the problem I'm trying to work around though.....
My understanding was that FCP X could import footage 'in the background' while you get to edit.
Hmmm..... well, to a certain extrent it can, as in you can keyword etc, but if you even think about skimming over some footage, set in/out or add anything to the timeline then importing pauses.
Am I missing something fundamental here? This is not what I call importing in the background.
Ideas?

Anyone have any luck finding a messenger bag that fits a Y70

So I bought a Y70 and I love it, but for the life of me, I cant find a messenger bag on amazon that is actually large enough to hold it and a charger and a few accessories. I can only find the one Lenovo recommends, and while it does hold the laptop, I dont really care for its ability to carry much else. Everyone keeps suggesting the timbuck2 classic bag in extra large, but it seems they do not make it anymore. Any input would be awesome.

Hi TheMuffinOfEvil,
Welcome to Lenovo Community Forums!
You may want to take a look a this
http://www.ebay.com/itm/Backpack-Messenger-Bag-for-HP-ENVY-17-3-Inch-Lenovo-Y70-17-3-Laptop-Black-Purple-/361148392099
http://www.ebay.com/itm/Hybrid-Carry-Messenger-Bag-Laptop-Backpack-for-Lenovo-IdeaPad-Y70-17-3-Notebook-/151521528573
Hope this helps
Cheers!

Time Machine reporting "The backup was not performed because an error occurred while copying files to the backup disk". Anyone have any idea what's gone wrong?

After months of working OK Time Machine is reporting "The backup was not performed because an error occurred while copying files to the backup disk". Anyone have any idea what's gone wrong?

asknrobson wrote:
Wierd!
I followed #C3 and loaded Time Machine Buddy, which was defnitely helpful, then deleted the file that the backup failed at, but after 3 more attempts I stopped deleting or excluding files as this wasn't improving the situation.
The recommendation is to exclude those files from being backed-up, not to delete them!
Updating boot support partitions for the volume as required:
Yes, that's a bit misleading. It just means that will be done, if it's required, which it isn't on your backups.
I have no idea if anything actually was changed however just when I had given up and walked away, TM has started working after a week of failing.
It probably did find and fix something. Just for reference, Disk Utiltiy usually shows the progress and repair messages in the center part of the window, but often doesn't when repairing a sparse bundle on a network. You can see the messages at any time by clicking the Log icon in the toolbar, or select Window > Show Log from the menubar.
Anyway, glad it's sorted out!

I'm having probs backing up iPhone 5 to iCloud - just sits on the backing up screen with message 'estimated time remaining....' But goes no further and doesn't back up - wifi is fine and definitely enough storage spaces. Anyone have any ideas plea

I'm having probs backing up iPhone 5 to iCloud - just sits on the backing up screen with message 'estimated time remaining....' But goes no further and doesn't back up - wifi is fine and definitely enough storage spaces. Anyone have any ideas please?

You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.
First check that your device is correctly connected to the wifi/internet (settings > wifi)
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
More about iCloud v iTunes Back Up

Just bought 4th Gen.iPod shuffle from Amazon. My computer (Windows 7) wont recognise device, neither does iTunes. Have reinstalled iTunes, and nothing seems to work, Anyone have any ideas.

Just bough 4th Generation iPod Shuffle from Amazon - comp;uter doesnt recognmise device, neither does iTunes. I have re-installed iTunes, re-started Computer but nothing seems to work. I have a 2nd generation iPod shuffle and that is recognised by computer. Anyone have any suggestions - I am at my wits end.

There is a USB printer connected to the back port of the PC. The mouse and keyboard are both PS/2.
I did attempt to reinstall the USB root drivers. After uninstalling iTunes and all the other apple software packages included, I uninstalled everything USB in Device Manager, then rebooted the PC to let Windows reinstall it all.
Reinstalling the OS -might- fix the issue, but if that were the case, it's most likely just a software conflict that can easily be fixed if I can manage to narrow the specific conflicts down. I've already essentially disabled everything with MSCONFIG except for Apple stuff, so I'm at a loss as to where to go. I've attempted the 5 Rs and all that as well, none of it seems to do the trick. I also cleared the temp folder multiple times (once per each iTunes uninstall / reinstall following the support site directions of uninstalling all the extra apple software) as well as attempted restarts of the Apple services.
One oddity I would like to point out is that if I attempt to restart the iPod service through services.msc, it will not restart. It throws the error message of "the service failed to respond in a timely fashion" or whatever. I instead have to use the windows Task Manager to manually kill the iPod process in the processes list.
I just now removed the USB printer and plugged the shuffle into the same port, but I receive the same error message in iTunes about the iPod being corrupted and it needing a restore. If I push restore, the software gets stuck in an endless loop. There are no other USB devices attached to this computer, the motherboard drivers are fully up to date from nVidia's website, and other USB devices clearly function just fine (USB memory sticks, USB printer, etc). If I use the Diagnostics option under Help in iTunes, it will claim there is no iPod connected, and, again, the iPod still does not show up in Windows Explorer under My Computer as an attached device, nor does it show up in Disk Management as a mounted partition.

I can't open any attachments on gmail, does anyone have any suggestions as to how to fix?

I can't seem to open up any attachments in gmail. Does anyone have any suggestions as to how to fix? Thank you

Hello Jim,
Thank you for providing the details of the issue you are experiencing with opening attachments in Mail on your iPad.
I recommend following these steps for an issue like this (you can skip 4 because it does not relate to the issue you are experiencing and any other steps you may have taken):
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on),reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
You can find the full article here:
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
If you get to step 5, I recommend backing up your iPad before performing the restore:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/HT1766
Thank you for using Apple Support Communities.
Best,
Sheila M.

Anyone have any luck installing the PCI-8212 in a Dell PC w/ NT 4.0 and the new PCI 66MHz/64 bit bus?

Similar Messages

Maybe you are looking for