Anyone have issues with their ipad staying connected to the Internet using an arris-5e12 router? I seem to be getting kicked off the Internet frequently
Anyone having trouble staying connected to the Internet using an Arris 5e12 router.?
Are you in an area where it doesn't pick much wifi signal up. If yes try to move your device nearer to the wifi connection box
Similar Messages
-
Anyone have issues with their power button on the 928?
I've had my 928 replaced once already and now the power button has decided it only wants to work occasionally. I love the phone especially the camera and sound and video quality of the recordings it makes. I have developer preview on it so I have the 8.1 update so no gripes there... Also VZW reps since it's still under warranty (I have total equipment coverage as well) can I have it replaced? It has a small scuff on the bottom of the back side and when I say small I mean small enough I could remove it with a polishing wheel on a dremel and make that dissappear completely.... I can't afford to send it off or anything so a replacement mailed to me and sending this one in (again) is my only option as I use it for business.
Hello d4a1985,
I'd love to help you figure this out! Normal wear and tear does not void the warranty, but damage such as a crack or a break would. Since we are unable to see the device, if you are unsure, we suggest bringing it in to the Verizon store for an evaluation.
Thanks,
MichelleH_VZW
Follow us on Twitter @VZWSupport -
Does anyone have problems on their IPad 2 with an app called Pinball HD Collection freezing up on a regular basis and I then have to remove the app and then reinstall it. Most frustrating
Thankyou, but the shop said that they spoken to apple and that they have now changed their policy and that they do not give a replacement. So are you telling me that their information is false. Also what should they have done. This problem has existed since i bought it.????? What should i do?????
-
Anyone have issues with Sata 3 SSD in the 2011 Macbook Pro
Hi Guys and Gals.
Does anyone have issues with the Macbook Pro 2011 Model with a Sata3 Solid State Drive ?
I have issues and have a Vertex3 made by OCZ. I am in active discussions with OCZ to find a resolution on their end. I have also contacted Apple Care and Intel and have run into dead ends.
However I am bringing my MBP for a repair, logic board replacement and will post the results after they change the logic board for me.
Check my thread on OCZ: http://www.ocztechnologyforum.com/forum/showthread.php?89970-A-call-to-all-Macbo ok-Pro-2011-Users-with-SATA3-Issues
Regards,
JaseWell, my My Genius appointment went very much as anticipated - it might well be a SATA III connection but Apple they do not support SATA III drives - least of all other people's.
Furthermore, they do not actually support anything other than the original configuration as sold - so given that I bought a 750 GB HD version, that is what I am stuck with - I asked Apple (London Regent St) if they could upgrade it to one of their own SSDs if I paid for it - they could not. They can only repair the machine to its original condition. They could not even advise me as to what Apple co-branded SSD I should look for to be compatible with this model - 512 Gb drives do come up on Ebay - Apple / Toshiba seems to be the normal one - but they couldn't advise if that would work or not. So it could be good money after bad.
Anyhow, they finally agreed to swap the cable, for a charge, so that will take two or thee days, plus the 5mins to do the job. I will post the results of the cable swap when I have it. They could not tell me whether it would be a different version of the SATA cable to the one already in the machine - but I asked to keep the old one so I can see if there is any visible difference.
It does seem strange that Apple support thunderbolt drives - which you can't even buy yet, but don't support SATA III in either Mac Pro or MAcBook Pro given that the full 3.0 standard was released on May 27, 2009.
Two and a bit years is a long time in tech terms.
Stephen
eni wrote:
I, as so many others, are also facing issues with my SATA 3 SSD. I've been reading about people having issues on OCZ's forum, on Intel's forum and all over the web. I have a MBP 2011 13" bought last month with the 6/6 setup.
Hotjase, have you come to understand that the issue lies with the logic board? One would hope that Apple would owe up and come forward if there are in fact faulty logic borards. I have read that Apple have gone from 6/3 to 6/6 and then back to 6/3, though I do not know if this is applicable to all MBP models, or just some. As I sayed, I have the 13" model.
SdeS, what was the result of your talk with the Genius? Did you receive a new cable? If so what result? -
Has anyone had issues with their itunes not coming up?
Has anyone had issues with their itunes not coming up? I keep getting error message 13014. I just bought a new classic ipod and am not sure if this is the problem.
Hi
Your new iPod has certain operating system requirements. Does your iMac meet those requirements?
http://www.apple.com/ipodclassic/specs.html
3rd Column on the right hand side, about a 3rd of the way down. To find out which version of iTunes you have, launch it and select "About iTunes" from the iTunes menu.
HTH?
Tony -
Does anyone have issues with start up time
does anyone have issues with start up time
Have you tried a reset?
Press & hold both Home & Power until you see the Apple logo.
If that doesn't fix it, restore it as new and see if that fixes it. -
Does anyone have issues with your battery in the iPhone 5 having to be recharged 2 to. 3 times daily?
Only concrete way is to use it less sorry see here every method possible has been tried
https://discussions.apple.com/thread/4329696?start=2970&tstart=0 -
I take a .NEF file and a .JPG file with every click. When I transfer the files using a flash drive to another computer I never get all of the files to transfer. I get some of the .NEF and some of the .JPGs but not all. How come?
If you're exporting a project then you'll only get the images in that project. Also if any of the masters are referenced then you won't get those masters unless you check Consolidate masters into exported library
It might be best if you started from the beginning and explained what it is your are trying to do and how you're going about doing it. Also a description of you're hardware/software setup would be helpful. -
i didnt have issues with itunes before...but pc asked to download new version. i did. when i click itunes i get my original music, but when i click store...i get nothing. i watched tutorial....but still cant open itunes store. im looking for music to buy.
Hello bogley
Check out the article below for troubleshooting access to the iTunes Store.
Can't connect to the iTunes Store
http://support.apple.com/kb/TS1368
Thanks for using Apple Support Communities.
Regards,
-Norm G. -
I have an IPAD 1. I keep getting kicked off a site and back to the start page. Any one know why and how can I fix it? Thank you.
Try this...
Close All Open Apps... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
The first day I got it, it was fine. Then when I woke up the next day which was less than 12 hours after hooking it up, it wouldn't connect..it let me type a couple of characters to my password, but then literally stopped. My trackpad has yet to have any issues whatsoever. Even during the keyboard malfunctioning it's been fine. In order to get the keyboard to work, I have to log into the guest account, let it be discovered, then pair it. It as now happened on 4 different days, more times than that, though. I've only had it for just over a week. I don't think there's a problem with the computer just because the trackpad is fine. The keyboard blinks that little green light when it's having this issue, too. As you know, it's normally off. Today I tried to log in for the first time and it did the same thing as the first day. It let me type a few characters, then stopped and wouldn't connect. This time, though, when I went into the guest account to let it be discovered it wouldn't let me type the numeric code to pair it. I had to hold down my power button to restart it because I was logged in on another user and it wouldn't let me restart it the normal way without typing the admin username/password...which I obviously couldn't do seeing as how I didn't have a keyboard. Does anyone else think this is a faulty keyboard I need to return? Or is this unfortunately how it works...or what? Help please...
I was at the Apple Store that week 5 times for a messed up phone that they replaced with a total of 4 replacement phones because of different issues the ones they gave me had and driving there that much almost made me say screw it to the iPhone...now I buy this very expensive iMac spending 2 grand and this happens....I'm so mad I am thinking of just returning it and giving up on Apple altogether which Idon't WANT to do...but with all I've dealt with in a 2 week period with the iPhone and now this...oh and I bought a $100 cell phone case I had to replace because it wasn't working correctly. So you see, I am beyond frustartee over Apple.....if anyone could help I'd greatly appreciate it. With all of my problems I've had, you'd think they want to do more than apologize for my inconvenience. Even the techs that helped me said it was ridiculous I've had so many issues and now I'm just adding to the list..Try this:
Go to System Preferences - Bluetooth. Delete the keyboard from the list of devices by pressing the "-" button. Take the batteries out of the keyboard and reinsert them. In Bluetooth Preferences press the '+" button to add the new device. If the keyboard begins to pair, click the word "pair" and type in the passcode. Press return. The keyboard is now paired.
If the mouse is not pairing, try this: shut down the computer completely, unplug any USB mice, then turn off the power to the bluetooth mouse. ONce the computer starts up again, wait for the pop-up looking for a mouse. Turn on the power to the bluetooth mouse. It should work normally now. -
Anyone else having wifi drop out issues with their iPad 3?
Right from the word 'go' I have experienced frequent losses in wifi connectivity on my iPad 3 (64Gb, 4G). Fortunately I don't have to keep re-entering my wifi password but I do have to keep renewing the lease which is really tedious. My iPad 2 works flawlessly on the same network (Netgear cable modem/router from Virginmedia). I also have an iPod Touch and an iPhone that also work without issues on this set up. Thus far I have tried:
Rebooting the modem
Restoring the iPad 3
Resetting the network settings on the iPad 3
Changing the channel on the router from 'auto' to various other channels
Switching between WPA and WEP encryption on the router
Turning off the auto brightness (a tip I saw that worked on some of the earlier iPads)
None of the above have helped and after three calls to Apple support I have received a replacement iPad 3 which has exactly the same problem? People talk about replacing one's router as a potential solution but my options are limited because this is a combination cable unit supplied by Virginmedia. Also, the issue points pretty clearly to the iPad 3 because, as I mention, my other Apple products work flawlessly. I'm going abroad shortly and I'm thinking of leaving the iPad 3 at home if I can't sort out its wifi capabilities.
Any ideas?Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Cheers, Tom -
I have a 2009 MacBook Pro which I have upgraded a few things on. I have updated to Yosemite and am having problems with getting my laptop to come out of sleep mode, and to start when shut off. Any ideas of what this might be or how to correct it? Is this more probably a hardware issue or software?
Try these in order testing your system after each to see if it's back to normal:
1. a. Resetting your Mac's PRAM and NVRAM
b. Intel-based Macs: Resetting the System Management Controller (SMC)
2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
Download and install the 10.10.1 update.
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless.
5. Reinstall Yosemite from Scratch:
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
How to Clean Install OS X Yosemite
Note: You will need an active Internet connection. I suggest using Ethernet if possible
because it is three times faster than wireless. -
I can make a note and It deletes it, sometimes a week later sometimes 3-5 weeks later. BUT there's 1 note I've had for about 9 months and it's still there. I've had it since before the new iOS 7 system... And with the emails I can delete then and then they pop back up, delete again and there they are again. But it's not all the time. Just whenever it feels like it. And my phone isn't old, I've only had it about 3 months now. Is anyone else having these issues? They're driving me nuts!
Give it a go
Hold the cmd key (next to the spacebar) & try clicking a few messages. Command key looks a bit like a cloverleaf.
There are other shortcut keys as I mentioned before just try a few key combinations & you'll get the hang of it.
Once the messages are selected you can either drag them into a Mailbox or use the menus to perform operations like 'Mark as read' or 'Mark as junk' etc.
You may want to show the mailbox list (if it is hidden). This is in the 'View menu > Show Mailbox list'. It should make it easier to move the messages around.
The shift key is the one that lets you select a range, just select the starting message, then hold shift & select the end message.
I think it is harder to explain in words, so try it out you'll get to grips with it.
Good luck. -
Anyone have issues with "touch screen" not responding?
Does anyone find that the touch screen doesn't respond? I have huge issues with this style.
Touching and swiping on a screen that is 1.5 inches isn't fun. I need shade to read the screen (bad for snow), I need to go thru so much just to get to a song, a podcast, whatever that was playing before I HAD to turn off nana. I need to turn off nano each time.
1. Turn on by holding button like forever.
2. swipe, swipe, swipe, swipe to get to songs or podcast. Select, select, touch selcet, not selecting, touch, touch touch.
3. Select 'songs; selevet something else to get to a screen that says shuffle.
4. Select, select, touch, touch, use index finger, thumb, touch, breath on finger, touch again.
5. After one song plays after selecting "shuffle", it repeats, repeats,
6. Take ipod out of pocket, stand in shade, hit the snooze whatever button, to activate screen, Is screen activitated? yes? But it blinked off to quick to make selectioon of touch proof screen.
7. Walk inside to touch screen, to see screen. Hit button, wait for long time for this to start again (much like laptop starting).
8. Swipe to get to menu with songs, swipe, swipe, swipe swipe.
9. Select music: albums, artist songs. By selecting I mean touch touch touch, touch, use thumb, touch. for each selection
10. Are you sure this is an Apple product?
Can I return this POS and wait for someone to go back to what worked best??Oh, and yes I have restored to factory settings. Then resynch.
I have done the soft reset or whatever it's called on this one.
It is updated.
Maybe you are looking for
-
Creation of reports using JasperReports
Hi all! I have a problem with developing Java code for printing reports, by using JasperReports tool. I'm trying to create report by using next peace of code (you can found it also on http://ensode.net/jasperreports_intro.html) package myReport; impo
-
Hello everybody I have a Standby DB on SUSE 10 with +ASM configured. When I query v$asm_disk, total_mb and free_mb of diskgroups appears on 0. Now I can get in asmcmd and see whole storage of database(datafiles, control files, etc)... Does somebody k
-
JavaFX applets hang on Vista 64
I'm unable to run any applet that uses JavaFX on my 64-bit Vista machine (Vista Business 64-bit, SP2). The applet hangs during the Java loading animation. It consumes no CPU. For example, the Vancouver Olympics medal viewer (http://www.vancouver2010.
-
Error when opening exported Excel document
hi, i'm using the following to let the user export JSP to Excel file: response.setContentType("application/download "); response.setHeader("Content-Disposition","attachment; filename=test.xls"); problem happens only for the first when i try to open t
-
How to create sap study platform(include BW,EP,ABAP develop IDE).
How to create sap study platform(include BW,EP,ABAP develop IDE).Thanks!