Anyone managed to get a discounted monthly price?

I'm currently on ADSL2+ with quite a decent monthly discount (I was ready to jump ship).
As the application process seems to be web-based, I can't see a way of finding out if I would retain all/some/any of the discount if I upgrade.
My guess is that if you want Infinity, you pay list price, which would make it unattractive.
Hopefully, I'm wrong!

do it over the phone - Call the customer options team.
I am paying £20 pm (first 3 months £7.50), with free phone calls and line rental for £10 pm.
I upgraded from the adsl2+ 20mb to infinity, just call customer options and they can usually do something for you.
They also are giving out a sainsburys gift card which Im sure they can throw in.
Its best to negotiate, and if you arent successfull just say I dont think I want to upgrade yet and try again later.
Eventually you will find someone who is willing to do a little better.
Netgear Setup

Similar Messages

[SOLVED] Anyone managed to get a Lexmark X1180 printing/scanning?

Has anyone managed to get a Lexmark X1180 printing/scanning?
If so mind sharing how that was accomplished.
Last edited by Don-DiZzLe (2008-05-11 16:48:45)

I also bought an x1110 some years ago back in my winblows days.
I had the scanner partly working before i threw it in the shed. I was never able to get the printer working
By partly working I mean the whole A4 scan did not work, it would capture a quarter of the page and blank the rest out.
I'm not sure if the error was with the hardware or software. I remember I used it via Gimp and I think it was on Ubuntu 6.04
I just gave up. There are so many working brands out there, Lexmark just isn't one of them.
Last edited by corstar (2008-05-09 17:57:58)

Has anyone managed to get a 3TB dynamic disk on Windows 2003 Server?

I just got a pair of new 3TB disks that I wanted to put on my Windows 2003 server enterprise x64 system, SP2, all updates installed.
When I first tried to convert to dynamic, I got the error "The operation did not complete" as described in this KB article
http://support.microsoft.com/kb/826823
It says there is a patch, but there is not one for x64, just x86 and ia64
I found another technet discussion here: https://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/cb62238c-b3d0-4989-b45a-ae6de6701a7b?stoAI=10
However its best suggestion is to use a product from AOMIE, but I tried that and it didn't even recognize the disk. It also suggests that one needs a better version of diskpart.exe and to try to the 32 bit version. Anyone have any experience
with that?
I also tried creating moving the disk to Windows 7 x64, making it dynamic there, but when I move the disk back to 2K3 it does not recognize it, and goes back to a 2TB partition. I also saw something about needing a 512 block size for 2K3, but W7 does
not allow anything smaller than 1K.

Hi,
During my research, if found the following artcle which also mentioned a 3TB disk should be supported in Windows 2003 SP1:
Has anyone managed to get a 3TB dynamic disk on Windows 2003 Server?
http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/a720ae72-0c04-44dd-94c0-2e6aecce530e
So I contact the author about this issue. He said it could be caused if your hard disk is a 512e drive as the 3TB drives on the market today are normally 512e drives.
However manufacturers stopping identifying this, and if the controller is old, FSUtil will not able to identify a 512 drive but recognized it as a normal 512n drive.
Thus please provide the drive model so we could search on manufacturer's website for exact information.
Also please paste the screenshot in your reply which Satish mentioned if available.
In addition, here is an article Robert provided:
http://www.windowsitpro.com/article/what-would-microsoft-support-do/support-advanced-format-hard-drives-141584

Has anyone managed to get a PS3 Controller to work with OSX Lion?

Hi,
I wanted to connect my PS3 controller to my iMac (late 2011) using bluetooth but have been unable to do so. It will connect for a brief time but then it will lose connect as it has not paired. It also asks me for a pairing code. I have tried 0000 and this does not work. I have searched the internet and it seems this is a common issue. Has anyone managed to get it working?
Does anyone know if Apple plan to fix the issue with a forthcomming update?
Cheers,
Tim

There are numerous threads on this, please use the "More Like this" tool, you will find it on the right. I'm not sure if anyone has any solutions but that is the logical place to start.

Has anyone managed to get HP Warranty Information into SCCM?

Has anyone managed to get HP Warranty Information into SCCM?
I have tried a few scripts that I found on the net but none of them seem to work as I believe HP updated there site this year..

OK, I played around a bit (scripting from a web page isn't way beyond me) but... a few caveats. My lab isn't available right now; so all I could test was that the script ran on an HP laptop. A single HP laptop. and created the regkeys in
(in my case) HKLM\software\wow6432node\CompanyName\WarrantyInformation. So... one single test on one single workstation, and no testing of the mof edit means... I'll need your help to confirm it works.
Anyway, below is the script. Other caveats: It drops a log, and then continuously adds to the log file in %temp% (of the SYSTEM, which is using %windir%\temp). So depending upon what you want/need--you may want to change the EnableLogging
= True to EnableLogging = False (once you confirm it works on all/most of your boxes). The other caveat, of course, is to change the sCompanyname = to be your Company Name; although I suggest you don't have spaces or special characters in it. Short
'n' sweet. Then, naturally, once you have a box with the regkeys, use Mark Cochrane's RegKeytoMof 3.0 or higher to build the mof edits for you to paste to the bottom of your configuration.mof and sms_def.mof. In that blog above Eric Schloss was
using DCM as the delivery method to deliver the script to populate the regkeys--that worked for him and I see no reason it wouldn't work for everyone--so once you've tested the script interactively from a psexec -s -i cmd.exe shell on an hp box (to see it
create the regkeys) I'd make a DCM like Eric did and target a collection with a few HP laptops or desktops and confirm it works via the DCM.
Anyway, give this a try--again... only tested on 1 single, lonely little HP laptop. Needs a bigger test base!
Edit: and... even using Regkeytomof sometimes regkeys can be tricky. If the mof edit doesn't work right to pull the data back, post what you've added. someone here can usually spot if there's something not right about it and help you fix
the mof edit.
Edit #2: removed bad space, and bad copy/paste job as discovered by sevengs. Thanks!
on error resume next
EnableLogging = True
sCompanyName = "CompanyName"
Set oShell = CreateObject("wscript.Shell")
Set fso = CreateObject("scripting.filesystemobject")
strTemp = oshell.ExpandEnvironmentStrings("%temp%")
If EnableLogging Then
Set oLogFile = fso.OpenTextFile(strTemp & "\WarrantyInfo.log", 8, True)
oLogFile.WriteLine "*********************************************************"
End If
WriteLog "Beginning warranty information lookup."
sWebServiceHost = "http://h20000.www2.hp.com/bizsupport/TechSupport"
sWebServiceURL = "WarrantyResults.jsp"
sWebService = sWebServiceHost & "/" & sWebServiceURL
'Get the system's serial number from WMI
Set oWMIService = GetObject("winmgmts:\\.\root\cimv2")
Set colItems = oWMIService.ExecQuery("Select SerialNumber from Win32_BIOS",,48)
For Each objItem in colItems
sSerialNumber = objItem.SerialNumber
Next
WriteLog "Serial number of system is " & sSerialNumber
'Get the Product ID from WMI
Const wbemFlagReturnImmediately = 16
Const wbemFlagForwardOnly = 32
lFlags = wbemFlagReturnImmediately + wbemFlagForwardOnly
strService = "winmgmts:{impersonationlevel=impersonate}//./root/HP/InstrumentedBIOS"
strQuery = "select * from HP_BIOSSetting"
Set objWMIService = GetObject(strService)
Set colItems = objWMIService.ExecQuery(strQuery,,lFlags)
sProductNumber = ""
For Each objItem In colItems
If objItem.Name = "SKU Number" Then
sProductNumber = objItem.Value
End If
If objItem.Name = "Product Number" Then
sProductNumber = objItem.Value
End If
Next
If Len(sProductNumber) = 0 Then
WriteLog "ERROR: Product Number could not be determined."
oLogFile.WriteLine "*********************************************************"
oLogFile.Close
WScript.Quit(9)
Else
WriteLog "Product number of the system is " & sProductNumber
End If
Set colItems = oWMIService.ExecQuery("Select AddressWidth from Win32_Processor",,48)
For Each objItem in colItems
sAddressWidth = objItem.AddressWidth
Next
WriteLog "Operating system is " & sAddressWidth & " bit."
'Define the parameters string to send to the web site
sParameters = "nickname=&sn=" & sSerialNumber & "&country=US&lang=en&cc=us&pn=" & sProductNumber & "&find=Display+Warranty+Information+%C2%BB&"
WriteLog "Opening the web site URL " & sWebService & "?" & sParameters
'Define and call the web site
Set oHTTP = CreateObject("Microsoft.xmlhttp")
oHTTP.open "GET", sWebService & "?" & sParameters, False
'oHTTP.setRequestHeader "Content-Type", "application/x-www-form-urlencoded"
oHTTP.send
If oHTTP.Status = 200 Then
WriteLog "Successful response from the web site."
'WriteLog oHTTP.ResponseText
Process oHTTP.ResponseText
Else
WriteLog "ERROR: the web site returned status code " & oHTTP.Status
WriteLog "Returning exit code 1."
nExitCode = 1
End If
If EnableLogging Then
oLogFile.WriteLine "*********************************************************"
oLogFile.Close
End If
WScript.Quit (nExitCode)
Function Process (HTML)
WriteLog "Processing the HTML returned from the site."
intSummaryPos = InStr(LCase(html), "serial number")
If intSummaryPos = 0 Then
Process = ""
Exit Function
End If
intSummaryTable1Start = InStrRev(LCase(html), "<table", intSummaryPos)
intSummaryTable1End = InStr(intSummaryPos, LCase(html), "</table>") + 8
intSummaryTable2Start = InStr(intSummaryTable1End, LCase(html), "<table")
intSummaryTable2End = InStr(intSummaryTable2Start, LCase(html), "</table>")
table1 = getStr(intSummaryTable1Start, intSummaryTable1End, html)
table2 = getStr(intSummaryTable2Start, intSummaryTable2End, html)
const HKLM = &H80000002
Set oReg=GetObject("winmgmts:{impersonationLevel=impersonate}!\\.\root\default:StdRegProv")
sKeyPath = "SOFTWARE\" & sCompanyName & "\WarrantyInformation"
WriteLog "Registry key path is HKLM\" & sKeyPath
oReg.CreateKey HKLM,sKeyPath
WriteLog "Processing the first table from the web page."
arrGeneral = processTables(table1,1)
'arrGeneal should be in the form Serial Number, Product Number, Product Line, Product Description, Warranty Check Date
WriteLog "Processing the second table from the web page."
arrContracts = processTables(table2,2)
'arrContracts should be in the format Warranty Type, HW Warrenty Start Date, HW Warranty End Date, HW Warranty Status, Setup Warranty Start Date, Setup Warranty End Date, Setup Warranty Status
WriteLog "Setting registry values."
WriteLog "SerialNumber is " & arrGeneral(0)
oReg.SetStringValue HKLM, sKeyPath, "SerialNumber", arrGeneral(0)
WriteLog "ProductNumber is " & arrGeneral(1)
oReg.SetStringValue HKLM, sKeyPath, "ProductNumber", arrGeneral(1)
WriteLog "SerialLine is " & arrGeneral(2)
oReg.SetStringValue HKLM, sKeyPath, "ProductLine", arrGeneral(2)
WriteLog "SerialDescription is " & arrGeneral(3)
oReg.SetStringValue HKLM, sKeyPath, "ProductDescription", arrGeneral(3)
WriteLog "WarrantyCheckDate is " & CStr(CDate(arrGeneral(4)))
oReg.SetStringValue HKLM, sKeyPath, "WarrantyCheckDate", CStr(CDate(arrGeneral(4)))
WriteLog "WarrantyType is " & arrContracts(0)
oReg.SetStringValue HKLM, sKeyPath, "WarrantyType", arrContracts(0)
WriteLog arrContracts(1)
WriteLog "HardwareWarrantyStartDate is " & CStr(CDate(arrContracts(1)))
oReg.SetStringValue HKLM, sKeyPath, "HardwareWarrantyStartDate", CStr(CDate(arrContracts(1)))
WriteLog "HardwareWarrantyEndDate is " & CStr(CDate(arrContracts(2)))
oReg.SetStringValue HKLM, sKeyPath, "HardwareWarrantyEndDate", CStr(CDate(arrContracts(2)))
End Function
Function getStr(startpos, endpos, data)
Dim tmp
'Get the substring
tmp = Mid(data, startpos, endpos - startpos)
' Remove end of line
tmp = Replace(Replace(Replace(tmp, VbCrLf, ""), vbCr, ""), vbLf, "")
getStr = tmp
End Function
Function processTables(table, ttype)
' Remove HTML Tags and replace with "|"
Set re = New RegExp
re.Pattern = "<[^>]+>"
re.IgnoreCase = True
re.Global = True
table = re.Replace(table, "|")
table = Replace(table, " ", "")
table = Replace(table, ":", "")
table = Replace(table, " ", "")
' Remove excess |
re.Pattern = "[|]+"
table = re.Replace(table, "|")
' Clean up a bit more
re.Pattern = "\|\s+\|"
table = re.Replace(table, "|")
' Remove | from start and end of string
re.Pattern = "^\||\|$"
table = re.Replace(table, "")
arrTable = Split(table, "|")
arrTmp = ""
If ttype = 1 Then ' General Info Table
i = 1
For Each cell in arrTable
Select Case LCase(Trim(cell))
Case "serial number"
sSerialNumber = arrTable(i)
Case "product number"
sProductNumber = arrTable(i)
Case "product line"
sProductLine = arrTable(i)
Case "product description"
sProductDescription = arrTable(i)
Case "date of warranty check"
sCheckDate = arrTable(i)
End Select
i = i + 1
Next
arrTmp = sSerialNumber & "|" & sProductNumber & "|" & sProductLine & "|" & sProductDescription & "|" & sCheckDate
ElseIf ttype = 2 Then ' Contract Info
i = 0
For Each cell in arrTable
cell = Replace(cell," ","")
if Instr(lcase(trim(cell)),"wty hp hw maintenance onsite support") > 0 then
cell = "wty hp hw maintenance onsite support"
end if
if Instr(lcase(trim(cell)),"wty hp hw maintenance offsite support") > 0 then
cell = "wty hp hw maintenance offsite support"
end if
if Instr(lcase(trim(cell)),"wty hp support for initial setup") > 0 then
cell = "wty hp support for initial setup"
end if
Select Case LCase(Trim(cell))
Case "warranty type"
sWarrantyType = arrTable(i+8)
Case "wty hp hw maintenance onsite support"
sHWStartDate = arrTable(i+1)
sHWEndDate = arrTable(i+2)
sHWStatus = arrTable(i+3)
Case "wty hp hw maintenance offsite support"
sHWStartDate = arrTable(i+1)
sHWEndDate = arrTable(i+2)
sHWStatus = arrTable(i+3)
Case "wty hp support for initial setup"
sISStartDate = arrTable(i+1)
sISEndDate = arrTable(i+2)
sISStatus = arrTable(i+3)
case else
End Select
i = i + 1
Next
arrTmp = sWarrantyType & "|" & sHWStartDate & "|" & sHWEndDate & "|" & sHWStatus & "|" & sISStartDate & "|" & sISEndDate & "|" & sISStatus
End If
' Remove | from start and end of string
re.Pattern = "^\||\|$"
arrTmp = re.Replace(arrTmp, "")
'wscript.echo arrTmp
arrResult = Split(arrTmp, "|")
Set re = Nothing
processTables = arrResult
End Function
Function WriteLog (sText)
If EnableLogging Then
oLogfile.WriteLine Now() & " " & sText
End If
End Function
Standardize. Simplify. Automate.

Anyone managed to get a lexmark x4650 printer print from an ipad??

Got a lexmark x4650 wi-fi printer, anyone managed to get an iPad to print to it?

Just to clarfy i recently updated to ios 8 and i cant downgrade as some of the apps i needed cant work. This isnt good enough. Please find a solution anyone?

Has anyone managed to get play count/last played to sync?

I can live with the podcasts being borked, it's prompted me to use an app (hello iCatcher!) which I had been planning to do for a while. I'm still learning its ways, but it feels a lot more comfortable already.
The thing that I absolutely cannot understand is how ratings, playcount and last played times are not synchronising. I've a number of smart playlists based on these attributes and I haven't been able to get them to sync up since I enabled Match on my iPhone.
So I've got an iPhone which I sync with iTunes on a Mac. Everything's patched up to the latest version.
Has anyone successfully had any successful syncs? The smart playlists are just a joke - I'd expect the track listings to be comparable between devices, but they just aren't.
This is a beta product which some glaring functionality holes. How Apple can think it's worth paying for is beyond me. The smart playlist functionality has been working seamlessly for years on iTunes ... but it's broken. And I paid for the product that broke it. I'm feeling very let down.

I haven't managed to get any playcount, ratings etc to sync. There are so many issues with this version of iTunes Match I cannot believe Apple released it.
The order of tracks in playlists doesn't match iTunes on my Mac, selecting a folder of playlists in iTunes on my iPhone hangs the phone and sometimes crashes it, metadata doesn't sync, some albums are split into 2, etc.
Looking forward to an update soon.

Anyone managed to get a QuickOffice update ?

I have an E72 with QuickOffice 5 on it.
Supposidly I can do this http://www.quickoffice.com/quickoffice_symbian/free_update/ but have been unable to get a direct download started or receive an email by following the by email process.
So let me ask the forum, has anyone managed to sucessfully go to this website and download an update ? Or is this sale hype/myth ?

I don't want to install it from another site, for all I know these other versions have trojans.
Sure on the paying for it, maybe I would if I knew what I was getting in version 6.
So yes I'll contact their support and get them to fix their delivery mechanism. No point sending me a private link or copy for it, I want to see their advertised delivery method working or a technical explaination as to why it isn't working for me.
Maybe it is another issue related to IMEI number and subsidised phones not having any entittlement to an upgrade, due to some behind the scenes cutting of costs.

Has anyone managed to get an iPhone to work with BoostMobile?

I've wanted an iPhone for years now but don't feel it will be made available through Boost for purchase so I'm looking for options to somehow make it happen. BoostMobile uses the Sprint/Nextel networks for its customers. I like having no contract and unlimited everything, and I worked my way through the shrinkage program down to $35.00 a month. Any suggestions on how to make this happen would be extremely helpful. Thanks.

If I read your question correctly you want to buy an iPhone unlocked without a contract? If you do go here http://store.apple.com/us/browse/home/shop_iphone/family/iphone/iphone4s and select "Or get iPhone unlocked and contract-free"

Has anyone managed to get icloud to synchronise properly with outlook calendar?

I have an iphone 5 and am running outlook 2010 on windows 7 32 bit.
I can get icloud to do the intial upoload of the calendar but then after that it won't synchronise new calendar entries.
The phone and icloud syc, but icloud won't sync with outlook whether the entry is put in outlook or in icloud.
I have spoken with Apple support and over many weeks have de-installed and re-installed icloud several times.
I have sent various diagnostiocs and screen shots.
The icloud outlook addin does not appear in the outlook add-ins section, although I can see what might be the add-in sitting on the c drive in the apple folder.
Support have also told me that there is no way to download the icloud add-in seperately.
Apple support are now telling me that I need to de-install and re-install outlook to try and get the add-in to install correctly.
That would be a real pain and I can see on this forum that other people have already tried that without success.
They also say that if that doesn't work I will need to completely re-install the OS.
I don't think they know what the problem is and are just trying anything that might work.
I really don't want to lose all my business data from outlook and certainly don't want to trash my whole PC.
Has anyone any idea where the problem might be?
Many thanks

Do I gather by the lack of answers that nobody has?

Has anyone managed to get Authorware 7 Content Working on the Web

Hi I get this message when I try to get the web player working
Can anyone help!!
[email protected]

I used classes12.jar with a 9.2 database without any problems. JDBC calls, XA Datasources as well as CMP calls worked fine.
I think the ojdbc14.jar is required for use with a 1.4 JDK.
Of course, there might be features in 9.1 that might require the new jar.
Just mentioning that the jar did not pose me problems. Adding this information so it might help the OP narrow down the source of error.

Anyone managed to get edge content working in a mailer?

Hi All,
I have just finished working on a mailer which I was hoping would work when viewed in an email client. However it doesnt seem to want to load. It works fine when viewing in a web browser. Anyone know if this is achievable or should I just stop trying.
Link to web version is: http://www.tomato-source.co.uk/mailers/newdisney/disneymailer.html
Cheers all.
Jon

Hi Jon, sending javascript, e.g. an Edge composition, in an email will either be blocked, not display, or get your email marked as spam, so generally not recommended!

Anyone manage to get ColdFusion to work under Apache on OS X 10.10 Yosemite?

Hi all I'm having great difficulty getting ColdFusion10 to work under Apache with OS X 10.10 Yosemite.
Here is a description of what I've faced and a little of what I've done to solve my problem
Problem 1
Apache httpd.conf file gets messed up
Solution: copy original httpd.conf file from /etc/apache2/original/ to /etc/apache2/
Problem 2
No Java Virtual Machine is installed!
Solution: install Java (version 6 or 7 is better) you may only be able to install version 8
Problem 3
ColdFusion doesn't know where your Java installation is so find and update your ColdFusion configuration files
/Applications/ColdFusion10/cfusion/bin/jvm.config
/Applications/ColdFusion10/cfusion/bin/coldfusion
/Applications/ColdFusion10/cfusion/runtime/bin/wsconfig_jvm.config
change the source to whatever your current Java is and where it's located
for example if you have version 7 installed:
/Library/Java/JavaVirtualMachines/jdk1.7.0_45.jdk/Contents/Home
if you have version 8 installed:
/Library/Java/JavaVirtualMachines/jdk1.8.0_25.jdk/Contents/Home
Problem 4
INFO: The APR based Apache Tomcat Native library which allows optimal performance in production environments was not found on the java.library.path: YOUR PATH HERE!
Solution:Still working on this one!

I think you should try Pacifist http://www.charlessoft.com/
It's a .pkg installer for OS X, I used it several times to install software that Apple's Installer can't install. After installing Xsan 1.0 from your CD, just launch Apple's software update to upgrade to version 1.3. I think it should work (I didn't try it with Xsan, but this procedure works with other software).
Khafaga

Has anyone managed to get an XA datasource working with Oracle?

In Sun j2sdkee 1.3.1 you must use XA-Datasources when you are using more than one
datasource in one transaction. So I declared my Oracle datasource to be a XA-Datasource.
The container is able to load and initlialize the Oracle XADataSource clasess. But when I first try to
open a connection with getConnection() I get an Exception:
javax.transaction.xa.XAException
at oracle.jdbc.xa.client.OracleXAResource.start(OracleXAResource.java:154)
at com.sun.jts.jta.TransactionState.startAssociation(TransactionState.java:232)
at com.sun.jts.jta.TransactionImpl.enlistResource(TransactionImpl.java:145)
at com.sun.enterprise.distributedtx.J2EETransaction.enlistResource(J2EETransaction.java:252)
at com.sun.enterprise.distributedtx.J2EETransactionManagerImpl.enlistResource(J2EETransactionManagerImpl.java:131)
at com.sun.enterprise.distributedtx.J2EETransactionManagerOpt.enlistResource(J2EETransactionManagerOpt.java:87)
at com.sun.enterprise.resource.PoolManagerImpl.registerResource(PoolManagerImpl.java:147)
at com.sun.enterprise.resource.PoolManagerImpl.getResource(PoolManagerImpl.java:128)
at com.sun.enterprise.resource.JdbcDataSource.internalGetConnection(JdbcDataSource.java:137)
at com.sun.enterprise.resource.JdbcDataSource.getConnection(JdbcDataSource.java:111)
I'm using classes12.zip from Oracle 9i (which supports jdk1.3.x) and an Oracle 8.1.6 database server.
Is there anything I have to configure on the database server? The JAVA_XA package is installed on the
server.
Thanks for any help
Helmut

I used classes12.jar with a 9.2 database without any problems. JDBC calls, XA Datasources as well as CMP calls worked fine.
I think the ojdbc14.jar is required for use with a 1.4 JDK.
Of course, there might be features in 9.1 that might require the new jar.
Just mentioning that the jar did not pose me problems. Adding this information so it might help the OP narrow down the source of error.

Has anyone managed to get Hotmail to work with Mail?

Hotmail aka Windows Live Mail.
Has anyone got Mail 3 in Leopard to work with Win Live/Hotmail?
If so, I would love to hear about how you did so, as I would like to use Mail to check e-mail. =)
Thanks.

How to Access Windows Live Hotmail with Mac OS X Mail - About Email
http://email.about.com/cs/macosxmailtips/qt/et042503.htm

Anyone managed to get a discounted monthly price?

Similar Messages

Maybe you are looking for