Anyone with onboard LAN based on the Qualcomm Killer E2205

I am considering a motherboard with an onbaord Qualcomm Killer E2205 chipset. I have only used Intel in the past. Does anyone have this hardware and have you experienced anything negative under Linux? I can't find any info as to whether or not the kernel supports this natively...

There's native support, the alx driver, in the kernel since 3.10 I think, so it'll work out-of-the-box. Don't know anything beyond that, but I don't see any reason why it wouldn't work fine.

Similar Messages

Problem with onboard LAN

Hi,
I have the following problem: After playing around with overclocking and having to reset the CMOS a couple of times, my onboard LAN stops working even if I don't overclock anything. No ping, and the traffic LED is always on. And most interesting, when I shutdown my computer the traffic LED stays on. Is this a BIOS bug or what? Anyone experiencing the same problem?

Well as you know Overclocking Can sometimes Fry something, or Everything on the Board, This is why it is Dangerous....But Before we go there, I assume that you Have Tried Disabling and then Re-Enabling the LAN in the BIOS, And in the "Device-Manager"?......And do you have in the Device Manager (Under-Network Connections) the LAN Listed? And if Click on it, does it say "Device Enabled, and Working Properly"?....If yes, then You are going to have to try to Clear The NVRAM in the BIOS by Enabling this option, and this will Reset the PNP/PCI String, and Hopefully that will be it.....If not, Go into the Device-Manager, and Uninstall the Driver, then Reinstall it......Try that, and let us know, And if you already did all of these things, then You May have Bigger Issues................Sean REILLY875

915G Neo2 won't boot win XP with onboard LAN enabled

Just wondering if anyone can solve my problem. Have got a 915G Neo2 board running with Windows XP. On enabling the onboard LAN in the BIOS it won't boot Windows....the following error is displayed on a windows blue screen
"0x0000007E pci.sys - Address F75DE0BF base at F75D7000"
Anyone got any idea how i can get this to work?
Thanks.

Moan Guide

Prob with onboard LAN!

It doesn't seem to want to work when I run my board in dual-channel mode!
I'm using my old generic 3com card in the meantime...but I might need that PCI slot.
I'm using the 6743, or the GM2LS, which is an mATX board with a p4 2.8c. No OC'ing, stock voltage on the CPU and my 2x 512 Corsair matched memory.
Win XP Pro SP1, 400W Antec SmartPower PSU.
Just updated all my drivers.
Any ideas anyone?
-Dave

You board has an onboard 10/100Mbps LAN right? Disable the onboard LAN so that you PCI Lan card can be use.

Having problems with onboard lan on KM2M (MS-6738)

I have enabled the onboard lan in the bios, i have installed the drivers for the onboard lan. When i plug in my cable modem connection the program that came with the mobo reads that there r lots of BPS coming into the computer but the computer wont send information out. I am running Windows ME for a littel while on it till i can get XP ...is ME my problem or does anyone have ne other suggestions?

thank you for aswering
This is the second pc I built with the exact specification and the first one didn't give me problem at all.
The only thing I did different was select the option of Quick Setup to install the on board lan and audio at the same time and i did not install.
Can this be a Hardware problem?
mean time i will unistall the Audio driver and try to installed by Safe Mode to see what happends.
Athlon 24+
MSI combo km2m ms-6738
256ddr
40gb
win xp pro

Internet Connection Sharing with onboard LAN

Hi
Does anyone know if it's possible to setup Internet Connection Sharing using the onboard LAN? I've managed to get shared files and folders working, but can't get internet access on the client PC.
Using the K8MM3-V
Windows XP Pro on both PC's
I have 3 NIC's I can use.
The Host PC is using the onboard LAN to connect to the internet
I'm using a Realtek RTL8139 Family PCI Fast Ethernet NIC in both the host and client PC's
The Host PC also has a NETGEAR FA312 Fast Ethernet Adapter (Currently disabled)
I'm using crossover cable and 2 NIC's method.
I don't have a hub, switch or router.
I've had it working before on Windows 2000 Pro, but can't remember how I did it. (I think it just all worked straight away).
Anyonew knows if this is possible, please let me know.
Thanks
Michael

Have a look here.
http://support.microsoft.com/default.aspx?scid=kb;en-us;306126, Hope this helps. DOK

Is there a way to fill a cell with a value based on the selection from another cell?

For example: If have a drop down menu created for Cell A1 with options (Dog 1, Cat 2, Bird 3). Is there a way to fill cell A2 automatically when I select from the drop down menu.
So if I selected 'Cat' in A1, cell A2 would automatically input the 2.

I suggest an extensible method that allows you to add other animals:
This method adds a small table called "Animal Lookup" that matches names (same as in the pop-up menu) with a value.
The table on the left uses this table to retrieve the value based on the animal:
B2=VLOOKUP(A2, Animal Lookup :: A:B, 2, 0)
select B2 and fill down

Has anyone with a version 4 had the front camera stop working?

Has anyone with a version 4 iPad had the front camera stop working? If so how did you get it to work again?

Have you tried restarting or resetting your iPad?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPad shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"
If you have an iPad 4 it is still under warranty. If the front camera is still not working call Apple Support for replacement.

How to create a linked data source with document libraries based on the same template?

I use SharePoint Foundation 2013, SP Designer and Visual Studio 2013 to my needs. But there are several things which i don't get.
I have a number of libraries which use the same template. I want to create a linked data source, that would contain them all, and if I add a library based on this template, the library would be added to the data sorce. Is it possible?
I tried creating linked data souces, but the view that it brings by default is limited(no sorting, etc.). How can it be modified?

I am planning to do my project on Linux with J2EE,Oracle technologies.You don't need to set up a DSN. Just use a JDBC connect string such as jdbc:oracle:thin:@localhost:1521:xe
~Jer

Sort a table with two columns based on the first

I have a powershell table with the columns 'Used Perc' and 'ID'.
This was formed from the following
$a = @{Expression={[System.Math]::Round(($_.nUsed_Avg/$_.nSize)*100,1)};Label="Used Perc";width=25}, @{Expression={$_.nStatisticalDiskIdentificationID};Label="ID";width=15}
$GLOBAL:CSV2 = Import-CSV $STATDISKOUT | Format-Table $a
Before this, the file $STATDISKOUT had the columns 'nUsed_Avg', 'nSize', and 'nStatisticalIdentificationID'.
My question is, how would I sort the new table based on 'Used Perc' but keeping the corresponding 'ID' column lined up to the right value?

We use a select statement to reorder columns and recalculate, The formatters just go at the end to adjust the display.
Import-Csv <file> | select <column order format> | Format-Table
or you can do it in the table:
Import-Csv <file | Format-Table -Properties ,f1.,f2.,,f3....Here is how to inset a sort inline:
$a=@{
L='ID';
E={$_.nStatisticalDiskIdentificationID};
L='Used Perc';
E={[System.Math]::Round(($_.nUsed_Avg/$_.nSize)*100,1)}
Import-CSV $STATDISKOUT | Select $a | Sort 'Used Perc' | Format-Table -Auto
¯\_(ツ)_/¯

Is there anyone with *better* battery performance on the 3GS?

OK, there are a lot of posts complaining about the 3GS battery life. I'm now curious to find out if there's a bad batch of batteries, or if it's a software issue involving all iPhone 3GS.
My question: is there anyone out there who's getting better battery performance on the 3GS when compared to the 3G, as advertised by Apple?
I understand that there are at least 3 kinds of battery issues showing up in this forum:
1. abysmal battery life caused by Exchange Push acting up
2. defective battery
3. "it seems a little worse than the 3G, something must be wrong"
There's nothing that can be done for categories 1 and 2, and I think it's interesting to talk about case 3.
Could it be that the 3GS battery indicator is simply more linear (and better calibrated) than the one on the 3G? I am one of those people experiencing subjectively worse battery life on my 3GS when compared to the 3G. But then I stopped and asked myself how I actually measure this.
Well, the difference is that the 3G stays at 100% much longer, then starts to go down very quickly. The 3GS, on the other hand, doesn't like staying at 100% and starts going down earlier but slower. But if I let them both drain, the performance at the end of the day will probably seem similar.
I tried to drain my 3GS with some heavy Safari surfing over WiFi and 3G, 30 minutes of 3G calls, using some third party apps, and with a 1-hour Peggle play. Then I finally played some videos, and it went dead after 5 hours of usage and 15 hours of stand by.
Is that the performance that can be expected, or can we hope for more? I never did the same test on the 3G, because I never noticed the battery meter going down like that, but I'm pretty sure it would turn out quite similar.
What do you think?

Battery performance depends on what you have running on your iPhone.
e.g. If you have Brightness set to high (or full) with Auto Dimming Disabled, Locations Services, Push Notification (set Fetch to Manually), Bluetooth, Wi-Fi (ask to join networks enabled too) and 3G all enabled your battery will get used a lot quicker, especially if you use Third Party Apps on top of all these other things.
If however you activate Wi-Fi when you want to use it, or Bluetooth etc as your needs require, battery performance will be better (as in your battery will last longer before requiring a charge). If you are on a low 3G coverage area, why have your iPhone constantly trying to join a 3G network? Switch 3G off and use the conventional carrier (2G) until you return to an area where you know 3G coverage is better.
I know these measures are less convenient than just having everything switched on, but if you want to maximise battery use between charges try activating the features you require when you require them, then disable them when you don't require them instead of having everything switched on permanently.
I have noticed when Push is enabled (3G has to be enabled also), it absolutely canes the battery

Issue with fetching data based on the given criteria.....

Dear All,
I am a bit new to oracle, Please can some help me.
I need to design a report out of the below data:
1. bprf_no will be my primary field
2. report parameters will be the bill_month & no_of_months
Based on above 2 parameters I need to scan through the data for BILL_MONTH <= '30-Jun-2012' and NO_OF_MONTHS >= 3 the other criteria being the AVG_IND in (1,2).
In brief the criteria will be to pick all BPRF_NO having AVG_ID in (1, 2) consecutively till a break (AVG_IND not in (1, 2) starting from the given BILL_MONTH and going below this period, that is BILL_MONTH <= '30-Jun-2012'.
For the below data, if my parameters are: BILL_MONTH <= '30-Jun-2012' and NO_OF_MONTHS >= 3, only the underlined data should be picked (as they fulfill the criteria) and the report output will be like the one posted below the sample data:
Here the NO_OF_TIMES is the count, that is no of times the BPRF_NO falls into the above mentioned criteria consecutively starting from the provided BILL_MONTH.
BPRF_NO BILL_MONTH VOID_STATUS AVG_IND
BP01 30-Jun-12 0 0
BP02 30-Jun-12 0 0
BP03 30-Jun-12 0 1
BP04 30-Jun-12 0 1
BP05 30-Jun-12 0 1
BP06 30-Jun-12 0 2
BP07 30-Jun-12 0 2
BP08 30-Jun-12 0 2
BP09 30-Jun-12 0 0
BP10 30-Jun-12 0 0
BP10 30-Jun-12 0 0
BP01 31-May-12 0 0
BP02 31-May-12 0 0
BP03 31-May-12 0 1
BP04 31-May-12 0 1
BP05 31-May-12 0 1
BP06 31-May-12 0 2
BP07 31-May-12 0 2
BP08 31-May-12 0 2
BP09 31-May-12 0 0
BP10 31-May-12 0 0
BP01 30-Apr-12 0 0
BP02 30-Apr-12 0 0
BP03 30-Apr-12 0 0
BP04 30-Apr-12 0 0
BP05 30-Apr-12 0 1
BP06 30-Apr-12 0 2
BP07 30-Apr-12 0 2
BP08 30-Apr-12 0 2
BP09 30-Apr-12 0 0
BP10 30-Apr-12 0 0
BP01 31-Mar-12 0 0
BP02 31-Mar-12 0 0
BP03 31-Mar-12 0 1
BP04 31-Mar-12 0 1
BP05 31-Mar-12 0 1
BP06 31-Mar-12 0 2
BP07 31-Mar-12 0 2
BP08 31-Mar-12 0 2
BP09 31-Mar-12 0 0
BP10 31-Mar-12 0 0
BP01 29-Feb-12 0 0
BP02 29-Feb-12 0 0
BP03 29-Feb-12 0 1
BP04 29-Feb-12 0 1
BP05 29-Feb-12 0 1
BP06 29-Feb-12 0 2
BP07 29-Feb-12 0 2
BP08 29-Feb-12 0 2
BP09 29-Feb-12 0 0
BP10 29-Feb-12 0 0
BP01 31-Jan-12 0 0
BP02 31-Jan-12 0 0
BP03 31-Jan-12 0 0
BP04 31-Jan-12 0 0
BP05 31-Jan-12 0 1
BP06 31-Jan-12 0 2
BP07 31-Jan-12 0 2
BP08 31-Jan-12 0 2
BP09 31-Jan-12 0 0
BP10 31-Jan-12 0 0
Below is the correct output that I am supposed to get.
BPRF_NO BILL_MONTH NO_OF_TIMES
BP05 30-Jun-2012 6
BP06 30-Jun-2012 6
BP07 30-Jun-2012 6
BP08 30-Jun-2012 6
My below query is fetching me wrong data:
Here BP03 & BP04 should not come into the listing itself.
select bprf_no, last_avg_bill_month, no_of_month
from
( select a.bprf_no, max(a.bill_month) last_avg_bill_month, count(*) no_of_month
from
( select
bill_month, avg_ind, bprf_no
from ibsoifc.vw_ibs_bill
where bill_month <= '30-Jun-2012'
and void_status = 0
and avg_ind in (1, 2)
order by bprf_no desc, bill_month desc ) a, ibsoifc.vw_ibs_bill b
where a.bprf_no = b.bpref_no
and a.bill_month = b.bill_month
group by a.bprf_no
having count(a.bprf_no) >= '&no_of_month' )
group by bprf_no,last_avg_bill_month, no_of_month
BPRF_NO LAST_AVG_BILL_MONTH NO_OF_TIMES
BP03 30-Jun-2012 4
BP04 30-Jun-2012 4
BP05 30-Jun-2012 6
BP06 30-Jun-2012 6
BP07 30-Jun-2012 6
BP08 30-Jun-2012 6

Based on my understanding..
select *
from t
order by bill_month desc,bprf_no;
BPRF_NO    BILL_MONTH VOID_STATUS AVG_IND
BP01       30-JUN-12            0       0
BP02       30-JUN-12            0       0
BP03       30-JUN-12            0       1
BP04       30-JUN-12            0       1
BP05       30-JUN-12            0       1
BP06       30-JUN-12            0       2
BP07       30-JUN-12            0       2
BP08       30-JUN-12            0       2
BP09       30-JUN-12            0       0
BP10       30-JUN-12            0       0
BP10       30-JUN-12            0       0
BP01       31-MAY-12            0       0
BP02       31-MAY-12            0       0
BP03       31-MAY-12            0       1
BP04       31-MAY-12            0       1
BP05       31-MAY-12            0       1
BP06       31-MAY-12            0       2
BP07       31-MAY-12            0       2
BP08       31-MAY-12            0       2
BP09       31-MAY-12            0       0
BP10       31-MAY-12            0       0
BP01       30-APR-12            0       0
BP02       30-APR-12            0       0
BP03       30-APR-12            0       0
BP04       30-APR-12            0       0
BP05       30-APR-12            0       1
BP06       30-APR-12            0       2
BP07       30-APR-12            0       2
BP08       30-APR-12            0       2
BP09       30-APR-12            0       0
BP10       30-APR-12            0       0
BP01       31-MAR-12            0       0
BP02       31-MAR-12            0       0
BP03       31-MAR-12            0       1
BP04       31-MAR-12            0       1
BP05       31-MAR-12            0       1
BP06       31-MAR-12            0       2
BP07       31-MAR-12            0       2
BP08       31-MAR-12            0       2
BP09       31-MAR-12            0       0
BP10       31-MAR-12            0       0
BP01       29-FEB-12            0       0
BP02       29-FEB-12            0       0
BP03       29-FEB-12            0       1
BP04       29-FEB-12            0       1
BP05       29-FEB-12            0       1
BP06       29-FEB-12            0       2
BP07       29-FEB-12            0       2
BP08       29-FEB-12            0       2
BP09       29-FEB-12            0       0
BP10       29-FEB-12            0       0
BP01       31-JAN-12            0       0
BP02       31-JAN-12            0       0
BP03       31-JAN-12            0       0
BP04       31-JAN-12            0       0
BP05       31-JAN-12            0       1
BP06       31-JAN-12            0       2
BP07       31-JAN-12            0       2
BP08       31-JAN-12            0       2
BP09       31-JAN-12            0       0
BP10       31-JAN-12            0       0
61 rows selected
with t1 as
(select BPRF_NO,BILL_MONTH,VOID_STATUS,AVG_IND,sm,
         case when sm >= 3 then
                    nvl(sm - lag(sm) over(partition by bill_month order by bprf_no),sm)
              else 0 end d
from(
    select BPRF_NO,BILL_MONTH,VOID_STATUS,AVG_IND,
           sum(decode(avg_ind,1,1,2,1,0)) over(partition by bill_month order by bprf_no) sm
    from t
    where bill_month = to_date('30-Jun-12','dd-Mon-yy')
    order by bill_month desc,bprf_no)
select t1.bprf_no,count(t.bprf_no)+1 no_of_times -- "The '1' stands for the count in t"
from t1, t
where t1.bprf_no = t.bprf_no -- "This can be an outer join based on your requirement and data.."
and t1.d = 1
and t.bill_month < to_date('30-Jun-12','dd-Mon-yy')
group by t1.bprf_no
order by 1;
BPRF_NO    NO_OF_TIMES
BP05                 6
BP06                 6
BP07                 6
BP08                 6

Does appstore work for anyone with an IOS product at the moment?

I wanted to download an app.. so i opened app store to download. i click o the download button, but it says
"Can not connect to itunes store"....I tried in My iPad, no luck.. Tried With iPhone 4s no luck there aswell.. Live in Sweden btw. Does Anyone know What the problem is all about?

We are all itunes users just like you.
You are not addressing Apple here at all.
Click Contact Us at the bottom of this page.

Feature Request : provide a way to create access policies or identities with matching condition based on the HTTP header's "Referer" field

Hello,
I have a use-case I would like to share with you. When a customer configures its WSA with highly restrictive internet access like in the example below, it may trigger some issues :
1- allow internet access only for URLs defined in whitelist.
2- block ALL other requests.
Let's take the following example :
1- the customer only allow requests to www.siteA.com. siteA.com is the only URL included in its whitelist.
2- www.siteA.com contains many embedded objects (such as facebook like tags, youtube videos, links to partners sites, ...)
In this configuration, the end user will be allowed to reach siteA but the page will not be fully displayed. All the embedded objects not directly located on siteA will be missing.
With WSA, the easiest way I can imagine to solve the issue is to list all the embedded objects present on siteA, get back their URL and also add these URLs to the whitelist. But this solution if of course far to be really convenient since it involves to know exactly how each HTTP page you want to consult is built.
With other proxies, such as Bluecoat proxies or McAfee Web Gateway proxies for example, I used to solve this kind of issue by using the HTTP referer field (the URL you come from). For example with Bluecoat :
<Proxy>
ALLOW request.header.Referer.url.domain=//www.siteA.com/
=> All requested objects from siteA.com will be automatically allowed by the proxy, even if they are not part of my whitelist.
- Do you have a better suggestion than the one I'm currently using with WSA (adding each sites in whitelist) ?
- Would it be possible to add the field HTTP referer as a matching condition for Identities and access policies in your next release ?
Thanks in advance
Best regards

As far as I'm aware this functionality is still not available... would be an awesome feature to have, but could also be abused at the same time by a user writing their own "middleware" proxy and setting the referrer header to that allowed site.. could be done in like ~15 lines of perl / python.
Either way... would still be a cool feature to have.

Cubes with different dimensions based on the same fact table

I have a fact table (f_a) with three dimensions (dim_a, dim_b, dim_c) and a one measure (m_a).
Is it possible to create cube with only one dimension (dim_a)?
Data for other two dimensions (dim_b, dim_c) should be aggreagated together.
Of course i can create second fact table with only one dimension, and then creating that cube would be no problem.
But is it possible doing this directly from the primary fact table (without creating second fact table)?
Raf
PS:i use AWM 9.2 to create target cubes. Source cubes i create with OEM 9.2

At the beginning i was confused by the numberous kind of cubes...
for example when i created cube in MS i just designed cube, picked fact table, and that's all. In Oracle firstly i create project of cube (first cube) in OWB. Then i export it to the OLAP Catalog (second cube). That cube in OLAP catalog is a source cube for the AW cube (third cube). Then i need to enable AW cube for OLAPI by creating another cube in OLAP Catalog (i use 9iR2, so OLAPI doesn't have direct access to AW cubes).
I spent much time until i could see my first sample cube in Discoverer or Excel as a final user should see it. :-)
Now i'm facing another problem - when you redesign cube (for example add another dimension), you can't just "refresh" it as it was in MS. You have to delete old cube and create new one. And deleting cube isn't so simple (i'm not sure which elements i should delete).
For testing and learning purposes i just create every cube in seperate AW. deleting whole AW is much simplier that deleting one cube.
Raf

Anyone with onboard LAN based on the Qualcomm Killer E2205

Similar Messages

Maybe you are looking for